Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Viscosity estimation model of fluorine-containing mold flux for continuous casting.

ABSTRACT: A viscosity estimation model for fluorine-containing mold flux for continuous casting was investigated based on the Arrhenius formula and the rotating cylinder method combined with nonlinear regression analysis. This model is highly applicable and not limited by the slag of a certain composition. For most slag compositions, the viscosities estimated with this model deviated from the measured values by no more than 10%, which was in better agreement with the measured values than the viscosities estimated by the Riboud, Iida and Mills models. According to the model calculation and experimental detection, a viscosity isogram of CaF2-Na2O-Al2O3-CaO-SiO2-MgO slag was produced, and the mass fraction of CaF2 in the low-viscosity zone was nearly 14%. An X-ray fluorescence spectrometric analysis of slag after the viscosity test showed that CaF2 and Na2O were significantly reduced, and the measured viscosity was greater than the theoretical viscosity due to the volatilization.

SUBMITTER: Zhao Z

PROVIDER: S-EPMC7935324 | biostudies-literature | 2021

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Viscosity estimation model of fluorine-containing mold flux for continuous casting.

Zhao Zhongyu Z Zhao Junxue J Qu Boqiao B Cui Yaru Y

PloS one 20210305 3

A viscosity estimation model for fluorine-containing mold flux for continuous casting was investigated based on the Arrhenius formula and the rotating cylinder method combined with nonlinear regression analysis. This model is highly applicable and not limited by the slag of a certain composition. For most slag compositions, the viscosities estimated with this model deviated from the measured values by no more than 10%, which was in better agreement with the measured values than the viscosities e ...[more]

PMID: 33667244

Similar Datasets

Structural and compositional analysis of a casting mold sherd from ancient China.

Project description:Casting had symbolic significance and was strictly controlled in the Shang dynasty of ancient China. Vessel casting was mainly distributed around the Shang capital, Yin Ruins, which indicates a rigorous centralization of authority. Thus, for a casting mold to be excavated far from the capital region is rare. In addition to some bronze vessel molds excavated at the Buyao Village site, another key discovery of a bronze vessel mold occurred at Daxinzhuang. The Daxinzhuang site was a core area in the east of Shang state and is an important site to study the eastward expansion of the Shang. Here, combining synchrotron X-rays and other physicochemical analysis methods, nondestructive three-dimensional structure imaging and different elemental analyses were conducted on this mold sherd. Through high penetration X-ray tomography, we obtained insights on the internal structure and discovered some pores. We infer that the generation of pores inside the casting mold sherd was used to enhance air permeability during casting. Furthermore, we suppose that the decorative patterns on the surface were carved and not pasted onto it. Considering the previous compositional studies of bronze vessels, the copper and iron elements were analyzed by different methods. Unexpectedly, a larger amount of iron than of copper was detected on the surface. According to the data analysis and archaeological context, the source of iron on the casting mold sherd could be attributed to local soil contamination. A refined compositional analysis confirms that this casting mold was fabricated locally and used for bronze casting.

| S-EPMC5352019 | biostudies-literature

Heat Transfer Analysis of 3D Printed Wax Injection Mold Used in Investment Casting.

Project description:Investment casting is one of the precise casting methods where disposable wax patterns made in wax injection molds are used to make a casting mold. The production capacity of precision foundry is determined by the time taken for producing wax patterns, which depends on the time taken for wax solidification. Wax injection molds are usually made of aluminum or copper alloys with the use of expensive and time-consuming computer numerical control (CNC) processing, which makes low-volume production unprofitable. To reduce these costs, the authors present a heat transfer analysis of a 3D printed wax injection mold. Due to the low thermal conductivity of the photopolymer resin, the influence of different cooling channels' shapes was investigated to improve the time of the manufacturing process. Transient thermal analysis was performed using COMSOL software based on the finite element method (FEM) and included a simulation of wax injection mold cooling with cold air (-23 °C), water, and without cooling. The analysis showed that use of cooling channels in the case of photopolymer material significantly reduces the solidification time of the sample (about 10 s shorter), and that under certain conditions, it is possible to obtain better cooling than obtained with the aluminum reference wax injection mold (after approximately 25-30 s). This approach allows to reduce the production costs of low-volume castings.

| S-EPMC9571762 | biostudies-literature

Designing a Transparent and Fluorine Containing Hydrogel.

Project description:Physical hydrogels are supramolecular materials obtained by self-assembly of small molecules called gelators. Aromatic amino acids and small peptides containing aromatic rings are good candidates as gelators due to their ability to form weak bonds as π-π interactions and hydrogen bonds between NH and CO of the peptide chain. In this paper we show our results in the preparation of a transparent hydrogel that was obtained by self-assembly of a fluorine-containing dipeptide that relies on the additional formation of halogen bonds due to the fluorine atoms contained in the dipeptide. We used Boc-D-F2Phe-L-Oxd-OH (F2Phe = 3,4-difluorophenylalainine; Oxd = 4-methyl-5-carboxy-oxazolidin-2-one) that formed a strong and transparent hydrogel in 0.5% w/w concentration at pH = 4.2. The formation of a hydrogel made of unnatural fluorinated amino acids may be of great interest in the evaluation of patients with parkinsonian syndromes and may be used for controlled release.

| S-EPMC8167729 | biostudies-literature

Synthesis and Immunomodulatory Activity of Fluorine-Containing Bisphosphonates.

Project description:Immune checkpoint blockade using anti-PD-1/PD-L1 or anti-CTLA-4 monoclonal antibodies (mAbs) has revolutionized cancer treatment. However, many types of cancer do not respond and for those that do, only a minority of patients achieve durable remissions. Therefore, oncoimmunologists are working to develop adoptive cell therapies for non-hematopoietic tumors by harnessing immune effector cells such as ?? T?cells and ?? T?cells. In contrast to conventional ?? T?cells that recognize peptides in the context of MHC class?I or II molecules, ?? T?cells expressing V?2V?2 T?cell receptors (also termed V?9V?2) are stimulated by isoprenoid metabolites (phosphoantigens) such as isopentenyl diphosphate in a butyrophilin-3A1-dependent manner. V?2V?2 T?cells kill almost all types of tumor cells that have been treated with bisphosphonates. In this study, we synthesized a series of fluorine-containing bisphosphonates based on current drugs and found that they stimulated V?2V?2 T?cell killing of tumor cells. A fluorine-containing prodrug analogue of zoledronate where phosphonate moieties were masked with pivaloyloxymethyl groups markedly enhanced V?2V?2 T-cell-mediated cytotoxicity, and also promoted the expansion of peripheral blood V?2V?2 T?cells. These results demonstrate that a prodrug of a fluorine-containing zoledronate analogue can sensitize tumor cells for killing as well as expand V?2V?2 T?cells for adoptive cell therapy.

| S-EPMC6818088 | biostudies-literature

In Vivo Estimation of Ketogenesis Using Metabolic Flux Analysis-Technical Aspects and Model Interpretation.

Project description:Ketogenesis occurs in liver mitochondria where acetyl-CoA molecules, derived from lipid oxidation, are condensed into acetoacetate (AcAc) and reduced to β-hydroxybutyrate (BHB). During carbohydrate scarcity, these two ketones are released into circulation at high rates and used as oxidative fuels in peripheral tissues. Despite their physiological relevance and emerging roles in a variety of diseases, endogenous ketone production is rarely measured in vivo using tracer approaches. Accurate determination of this flux requires a two-pool model, simultaneous BHB and AcAc tracers, and special consideration for the stability of the AcAc tracer and analyte. We describe the implementation of a two-pool model using a metabolic flux analysis (MFA) approach that simultaneously regresses liquid chromatography-tandem mass spectrometry (LC-MS/MS) ketone isotopologues and tracer infusion rates. Additionally, 1H NMR real-time reaction monitoring was used to evaluate AcAc tracer and analyte stability during infusion and sample analysis, which were critical for accurate flux calculations. The approach quantifies AcAc and BHB pool sizes and their rates of appearance, disposal, and exchange. Regression analysis provides confidence intervals and detects potential errors in experimental data. Complications for the physiological interpretation of individual ketone fluxes are discussed.

| S-EPMC8146959 | biostudies-literature

Ensemble deep model for continuous estimation of Unified Parkinson's Disease Rating Scale III.

Project description:BackgroundUnified Parkinson Disease Rating Scale-part III (UPDRS III) is part of the standard clinical examination performed to track the severity of Parkinson's disease (PD) motor complications. Wearable technologies could be used to reduce the need for on-site clinical examinations of people with Parkinson's disease (PwP) and provide a reliable and continuous estimation of the severity of PD at home. The reported estimation can be used to successfully adjust the dose and interval of PD medications.MethodsWe developed a novel algorithm for unobtrusive and continuous UPDRS-III estimation at home using two wearable inertial sensors mounted on the wrist and ankle. We used the ensemble of three deep-learning models to detect UPDRS-III-related patterns from a combination of hand-crafted features, raw temporal signals, and their time-frequency representation. Specifically, we used a dual-channel, Long Short-Term Memory (LSTM) for hand-crafted features, 1D Convolutional Neural Network (CNN)-LSTM for raw signals, and 2D CNN-LSTM for time-frequency data. We utilized transfer learning from activity recognition data and proposed a two-stage training for the CNN-LSTM networks to cope with the limited amount of data.ResultsThe algorithm was evaluated on gyroscope data from 24 PwP as they performed different daily living activities. The estimated UPDRS-III scores had a correlation of [Formula: see text] and a mean absolute error of 5.95 with the clinical examination scores without requiring the patients to perform any specific tasks.ConclusionOur analysis demonstrates the potential of our algorithm for estimating PD severity scores unobtrusively at home. Such an algorithm could provide the required motor-complication measurements without unnecessary clinical visits and help the treating physician provide effective management of the disease.

| S-EPMC8010504 | biostudies-literature

Safety assessment of sand casting explosion accidents by testing cavity pressure of the sand mold to protect employee health

Project description: Not available

| S-EPMC10869854 | biostudies-literature

Simulation of the Continuous Casting and Cooling Behavior of Metallic Glasses.

Project description:The development of melt spinning technique for preparation of metallic glasses was summarized. The limitations as well as restrictions of the melt spinning embodiments were also analyzed. As an improvement and variation of the melt spinning method, the vertical-type twin-roll casting (VTRC) process was discussed. As the thermal history experienced by the casting metals to a great extent determines the qualities of final products, cooling rate in the quenching process is believed to have a significant effect on glass formation. In order to estimate the ability to produce metallic glasses by VTRC method, temperature and flow phenomena of the melt in molten pool were computed, and cooling rates under different casting conditions were calculated with the simulation results. Considering the fluid character during casting process, the material derivative method based on continuum theory was adopted in the cooling rate calculation. Results show that the VTRC process has a good ability in continuous casting metallic glassy ribbons.

| S-EPMC5506926 | biostudies-other

Umibato: estimation of time-varying microbial interaction using continuous-time regression hidden Markov model.

Project description:MotivationAccumulating evidence has highlighted the importance of microbial interaction networks. Methods have been developed for estimating microbial interaction networks, of which the generalized Lotka-Volterra equation (gLVE)-based method can estimate a directed interaction network. The previous gLVE-based method for estimating microbial interaction networks did not consider time-varying interactions.ResultsIn this study, we developed unsupervised learning-based microbial interaction inference method using Bayesian estimation (Umibato), a method for estimating time-varying microbial interactions. The Umibato algorithm comprises Gaussian process regression (GPR) and a new Bayesian probabilistic model, the continuous-time regression hidden Markov model (CTRHMM). Growth rates are estimated by GPR, and interaction networks are estimated by CTRHMM. CTRHMM can estimate time-varying interaction networks using interaction states, which are defined as hidden variables. Umibato outperformed the existing methods on synthetic datasets. In addition, it yielded reasonable estimations in experiments on a mouse gut microbiota dataset, thus providing novel insights into the relationship between consumed diets and the gut microbiota.Availability and implementationThe C++ and python source codes of the Umibato software are available at https://github.com/shion-h/Umibato.Supplementary informationSupplementary data are available at Bioinformatics online.

| S-EPMC8275348 | biostudies-literature

The volatilization behaviour of typical fluorine-containing slag in steelmaking.

Project description:It was taken as typical steelmaking fluorine-containing slag systems with the remelting electroslag, continuous casting mould flux and refining slag. The volatilization behaviour of each slag system was analysed by thermogravimetric (TG) and mass spectrometry (MS) detection. The results showed that the remelting electroslag volatilized significantly above 1300°C and the volatiles were mainly CaF2, MgF2 with a small amount of SiF4 and AlF3; the continuous casting mould flux volatilization was divided into two stages, in the first stage (500°C∼800°C), CaF2 and Na2O reacted to form NaF, and in the second stage (greater than 1200°C), the CaF2 evaporation was highlighted; for CaF2-CaO-based refining slag, the volatilization was the most significant at the eutectic point 84% CaF2-16% CaO, and the volatility can be reduced by adding 5% SiO2. This research will be guiding significance for the composition and performance control of fluorine-containing slag and metallurgical environmental protection in the steelmaking process.

| S-EPMC7481700 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data