Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Benchmarking surface tension measurement method using two oscillation modes in levitated liquid metals.

ABSTRACT: The Faraday forcing method in levitated liquid droplets has recently been introduced as a method for measuring surface tension using resonance. By subjecting an electrostatically levitated liquid metal droplet to a continuous, oscillatory, electric field, at a frequency nearing that of the droplet's first principal mode of oscillation (known as mode 2), the method was previously shown to determine surface tension of materials that would be particularly difficult to process by other means, e.g., liquid metals and alloys. It also offers distinct advantages in future work involving high viscosity samples because of the continuous forcing approach. This work presents (1) a benchmarking experimental method to measure surface tension by excitation of the second principal mode of oscillation (known as mode 3) in a levitated liquid droplet and (2) a more rigorous quantification of droplet excitation using a projection method. Surface tension measurements compare favorably to literature values for Zirconium, Inconel 625, and Rhodium, using both modes 2 and 3. Thus, this new method serves as a credible, self-consistent benchmarking technique for the measurement of surface tension.

SUBMITTER: Brosius N

PROVIDER: S-EPMC7943785 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Emerging applications of liquid metals featuring surface oxides.

Project description:Gallium and several of its alloys are liquid metals at or near room temperature. Gallium has low toxicity, essentially no vapor pressure, and a low viscosity. Despite these desirable properties, applications calling for liquid metal often use toxic mercury because gallium forms a thin oxide layer on its surface. The oxide interferes with electrochemical measurements, alters the physicochemical properties of the surface, and changes the fluid dynamic behavior of the metal in a way that has, until recently, been considered a nuisance. Here, we show that this solid oxide "skin" enables many new applications for liquid metals including soft electrodes and sensors, functional microcomponents for microfluidic devices, self-healing circuits, shape-reconfigurable conductors, and stretchable antennas, wires, and interconnects.

| S-EPMC4231928 | biostudies-other

Surface Chemistry Enhancements for the Tunable Super-Liquid Repellency of Low-Surface-Tension Liquids.

Project description:Super-hydrophobic, super-oleo(amphi)phobic, and super-omniphobic materials are universally important in the fields of science and engineering. Despite rapid advancements, gaps of understanding still exist between each distinctive wetting state. The transition of super-hydrophobicity to super-(oleo-, amphi-, and omni-)phobicity typically requires the use of re-entrant features. Today, re-entrant geometry induced super-(amphi- and omni-)phobicity is well-supported by both experiments and theory. However, owing to geometrical complexities, the concept of re-entrant geometry forms a dogma that limits the industrial progress of these unique states of wettability. Moreover, a key fundamental question remains unanswered: are extreme surface chemistry enhancements able to influence super-liquid repellency? Here, this was rigorously tested via an alternative pathway that does not require explicit designer re-entrant features. Highly controllable and tunable vertical network polymerization and functionalization were used to achieve fluoroalkyl densification on nanoparticles. For the first time, relative fluoro-functionalization densities are quantitatively tuned and correlated to super-liquid repellency performance. Step-wise tunable super-amphiphobic nanoparticle films with a Cassie-Baxter state (contact angle of >150° and sliding angle of <10°) against various liquids is demonstrated. This was tested down to very low surface tension liquids to a minimum of ca. 23.8 mN/m. Such findings could eventually lead to the future development of super-(amphi)omniphobic materials that transcend the sole use of re-entrant geometry.

| S-EPMC6728126 | biostudies-literature

Surface Tension of Liquid Organic Acids: An Artificial Neural Network Model.

Project description:An artificial neural network model is proposed for the surface tension of liquid organic fatty acids covering a wide temperature range. A set of 2051 data collected for 98 acids (including carboxylic, aliphatic, and polyfunctional) was considered for the training, testing, and prediction of the resulting network model. Different architectures were explored, with the final choice giving the best results, in which the input layer has the reduced temperature (temperature divided by the critical point temperature), boiling temperature, and acentric factor as an independent variable, a 41-neuron hidden layer, and an output layer consisting of one neuron. The overall absolute percentage deviation is 1.33%, and the maximum percentage deviation is 14.53%. These results constitute a major improvement over the accuracy obtained using corresponding-states correlations from the literature.

| S-EPMC7998689 | biostudies-literature

Surface-Tension-Confined Channel with Biomimetic Microstructures for Unidirectional Liquid Spreading.

Project description:Unidirectional liquid spreading without energy input is of significant interest for the broad applications in diverse fields such as water harvesting, drop transfer, oil-water separation and microfluidic devices. However, the controllability of liquid motion and the simplification of manufacturing process remain challenges. Inspired by the peristome of Nepenthes alata, a surface-tension-confined (STC) channel with biomimetic microcavities was fabricated facilely through UV exposure photolithography and partial plasma treatment. Perfect asymmetric liquid spreading was achieved by combination of microcavities and hydrophobic boundary, and the stability of pinning effect was demonstrated. The influences of structural features of microcavities on both liquid spreading and liquid pinning were investigated and the underlying mechanism was revealed. We also demonstrated the spontaneous unidirectional transport of liquid in 3D space and on tilting slope. In addition, through changing pits arrangement and wettability pattern, complex liquid motion paths and microreactors were realized. This work will open a new way for liquid manipulation and lab-on-chip applications.

| S-EPMC7692703 | biostudies-literature

Fluid surface tension evaluation using capillary wave measurement with optical coherence tomography.

Project description:The surface tension of biological fluids is an important parameter because the mechanical properties of fluids are closely linked with hematological diseases and other pathophysiologies. Capillary waves are associated with fluid mechanical properties. Here, we propose a method that utilizes the acoustic radiation force (ARF) to generate propagating waves and optical coherence tomography (OCT) to measure the wave motion. This ARF-OCT method is capable of evaluating the surface tension of fluids, water and porcine whole blood in this study, based on the dispersion relation of capillary waves. Two-dimensional Fourier transforms were used to decompose frequency components of wave motion images to obtain a k-space representation and estimate the wave phase velocity. The phase velocity of capillary waves was obtained from the experimental results and compared to theoretical calculations. The surface tensions of water and porcine whole blood were determined from the experimental results. We first report that capillary waves measured with OCT can be a new promising modality for measuring the surface tension of fluids. The proposed method could be used to differentiate actual pathologic fluids or blood from those taken from healthy subjects and as a biomarker in future biomedical applications.

| S-EPMC7239663 | biostudies-literature

Sorting Liquid Droplets by Surface Tension Using Devices with Quasi-Superamphiphobic Coatings.

Project description:Any solid surface with homogenous or varying surface energy can spontaneously show variable wettability to liquid droplets with different or identical surface tensions. Here, we studied a glass slide sprayed with a quasi-superamphiphobic coating consisting of a hexane suspension of perfluorosilane-coated nanoparticles. Four areas on the glass slide with a total length of 7.5 cm were precisely tuned via ultraviolet (UV) irradiation, and droplets with surface tensions of 72.1-33.9 mN m-1 were categorized at a tilting angle of 3°. Then, we fabricated a U-shaped device sprayed with the same coating and used it to sort the droplets more finely by rolling them in the guide groove of the device to measure their total rolling time and distance. We found a correlation between ethanol content/surface tension and rolling time/distance, so we used the same device to estimate the alcoholic strength of Chinese liquors and to predict the surface tension of ethanol aqueous solutions.

| S-EPMC7240524 | biostudies-literature

Tension at the surface: which phase is more important, liquid or vapor?

Project description:Tension at the surface is a most fundamental physicochemical property of a liquid surface. The concept of surface tension has widespread implications in numerous natural, engineering and biomedical processes. Research to date has been largely focused on the liquid side; little attention has been paid to the vapor--the other side of the surface, despite over 100 years of study. However, the question remains as to whether the vapor plays any role, and to what extent it affects the surface tension of the liquid. Here we show a systematic study of the effect of vapor on the surface tension and in particular, a surprising observation that the vapor, not the liquid, plays a dominant role in determining the surface tension of a range of common volatile organic solutions. This is in stark contrast to results of common surfactants where the concentration in the liquid plays the major role. We further confirmed our results with a modified adsorption isotherm and molecular dynamics simulations, where highly structured, hydrogen bonded networks, and in particular a solute depletion layer just beneath the Gibbs dividing surface, were revealed.

| S-EPMC2788621 | biostudies-literature

Examination of the Butler Equation for the Surface Tension of Liquid Mixtures.

Project description:The classical Butler equation used to describe surface tension and the surface composition of liquid mixtures is revisited. A straightforward derivation is presented, separating basic chemical thermodynamics and assumptions proper to Butler's model. This model is shown to conceal an approximation not recognized by other researchers. The shortcoming identified consists of not allowing surface standard values to vary with surface tension by virtue of the changing composition. A more rigorous equation is derived and shown to yield the Butler equation in case of incompressible surface phases. It is concluded that the Butler equation slightly overestimates ideal surface tensions. Butler's surface-phase concentrations of the surface-active component are also slightly overestimated in the surface-active component dilute range, being just underestimated at higher concentrations. Despite this, Butler's model stands as a very good standard due to its versatility.

| S-EPMC8388096 | biostudies-literature

Native Surface Oxides Featured Liquid Metals for Printable Self-Powered Photoelectrochemical Device.

Project description:Constructing high-performance photo-electrodes by patterning the photo-active semiconducting components with desirable texture and architecture is one of the most promising approaches to achieve the practical and scale-up application of photo-electric or photoelectrochemical (PEC) devices. However, it is a still big challenge to efficiently and effectively handle nano-structural semiconducting materials into intergraded circuit devices, displaying good electric-contact and stability. Here, a facile manufacture strategy for fabricating native metal-oxides based photo-electrodes by directly printing Ga-based liquid metals is explored. The PEC device, functionalized by the native Ga-oxide functional layer, exhibits self-powered photo-detection behaviors and presents fast photo-electric responsibility in response to the simulated Sunlight illumination. This printable PEC device shows good potential for high sensitive self-powered photo-detector and provides a flexible and versatile approach for the design and fabrication of novel electrode structures.

| S-EPMC6541107 | biostudies-literature

Humidity-dependent surface tension measurements of individual inorganic and organic submicrometre liquid particles.

Project description:Surface tension, an important property of liquids, is easily measured for bulk samples. However, for droplets smaller than one micron in size, there are currently no reported measurements. In this study, atomic force microscopy (AFM) and force spectroscopy have been utilized to measure surface tension of individual submicron sized droplets at ambient pressure and controlled relative humidity (RH). Since the surface tension of atmospheric aerosols is a key factor in understanding aerosol climate effects, three atmospherically relevant systems (NaCl, malonic and glutaric acids) were studied. Single particle AFM measurements were successfully implemented in measuring the surface tension of deliquesced particles on the order of 200 to 500 nm in diameter. Deliquesced particles continuously uptake water at high RH, which changes the concentration and surface tension of the droplets. Therefore, surface tension as a function of RH was measured. AFM based surface tension measurements are close to predicted values based on bulk measurements and activities of these three chemical systems. Non-ideal behaviour in concentrated organic acid droplets is thought to be important and the reason for differences observed between bulk solution predictions and AFM data. Consequently, these measurements are crucial in order to improve atmospheric climate models as direct measurements hitherto have been previously inaccessible due to instrument limitations.

| S-EPMC5490419 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data