Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A New Hybrid Sensitive PANI/SWCNT/Ferrocene-Based Layer for a Wearable CO Sensor.

ABSTRACT: Developing a sensing layer with high electroactive properties is an important aspect for proper functionality of a wearable sensor. The polymeric nanocomposite material obtained by a simple electropolymerization on gold interdigitated electrodes (IDEs) can be optimized to have suitable conductive properties to be used with direct current (DC) measurements. A new layer based on polyaniline:poly(4-styrenesulfonate) (PANI:PSS)/single-walled carbon nanotubes (SWCNT)/ferrocene (Fc) was electrosynthesized and deposed on interdigital transducers (IDT) and was characterized in detail using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoemission spectroscopy (XPS), and X-ray diffraction (XRD). The sensor characteristics of the material towards carbon monoxide (CO) in the concentration range of 10-300 ppm were examined, showing a minimal relative humidity interference of only 1% and an increase of sensitivity with the increase of CO concentration. Humidity interference could be controlled by the number of CV cycles when a compact layer was formed and the addition of Fc played an important role in the decrease of humidity. The results for CO detection can be substantially improved by optimizing the number of deposition cycles and enhancing the Fc concentration. The material was developed for selective detection of CO in real environmental conditions and shows good potential for use in a wearable sensor.

SUBMITTER: Savin M

PROVIDER: S-EPMC7961761 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Flexible and sewable electrode based on Ni-Co@PANI-salphen composite-coated on textiles for wearable supercapacitor.

Project description:Flexible electrodes with high deformability and energy density are critical for electronic textiles. The key factor for achieving high-performance supercapacitors with superior power and energy density is the evaluation of materials that exhibit exceptional capacitive performance. Herein, we have prepared Ni-Co nanoparticles at the surface of polyaniline-salphen (Ni-Co@PS). Then, followed by casting Ni-Co@PS on a conductive carbon cloth (CC) as a substrate through a facile in-situ polymerization strategy. The morphologies of Ni-Co@PS composite were characterized by different methods such as FE-SEM, XPS, XRD, BET, and electrochemical methods. This nanocomposite showed high tolerability and a large surface area with excellent behavior as a new nanomaterial for supercapacitor application. Thus, the optimum composite designed with a metal ratio (nickel-cobalt 3:1 w/w) satisfactorily possesses a specific capacitance of up to 549.994 C g-1 (1447.2 F g-1) under 0.5 A g-1 and long-term cyclic stability featuring capacity retention of 95.9% after 5000 cycles at a current density of 9.0 A g-1. The Ni-Co@PS-CC, is a material with great potential as an electrode in asymmetric wearable supercapacitor (AWSC) apparatus, demonstrating a remarkable specific capacity of 70.01, and accompanied by an energy density of 23.46 Wh k g-1 at a power density of 800 W k g-1.

| S-EPMC10643400 | biostudies-literature

A Patient-Ready Wearable Transcutaneous CO<sub>2</sub> Sensor.

Project description:Continuously monitoring transcutaneous CO2 partial pressure is of crucial importance in the diagnosis and treatment of respiratory and cardiac diseases. Despite significant progress in the development of CO2 sensors, their implementation as portable or wearable devices for real-time monitoring remains under-explored. Here, we report on the creation of a wearable prototype device for transcutaneous CO2 monitoring based on quantifying the fluorescence of a highly breathable CO2-sensing film. The developed materials are based on a fluorescent pH indicator (8-hydroxy-1,3,6-pyrenetrisulfonic acid trisodium salt or HPTS) embedded into hydrophobic polymer matrices. The film's fluorescence is highly sensitive to changes in CO2 partial pressure in the physiological range, as well as photostable and insensitive to humidity. The device and medical-grade films are based on our prior work on transcutaneous oxygen-sensing technology, which has been extensively validated clinically.

| S-EPMC9138690 | biostudies-literature

Highly sensitive, self-powered and wearable electronic skin based on pressure-sensitive nanofiber woven fabric sensor.

Project description:The wearable electronic skin with high sensitivity and self-power has shown increasing prospects for applications such as human health monitoring, robotic skin, and intelligent electronic products. In this work, we introduced and demonstrated a design of highly sensitive, self-powered, and wearable electronic skin based on a pressure-sensitive nanofiber woven fabric sensor fabricated by weaving PVDF electrospun yarns of nanofibers coated with PEDOT. Particularly, the nanofiber woven fabric sensor with multi-leveled hierarchical structure, which significantly induced the change in contact area under ultra-low load, showed combined superiority of high sensitivity (18.376 kPa-1, at ~100 Pa), wide pressure range (0.002-10 kPa), fast response time (15 ms) and better durability (7500 cycles). More importantly, an open-circuit voltage signal of the PPNWF pressure sensor was obtained through applying periodic pressure of 10 kPa, and the output open-circuit voltage exhibited a distinct switching behavior to the applied pressure, indicating the wearable nanofiber woven fabric sensor could be self-powered under an applied pressure. Furthermore, we demonstrated the potential application of this wearable nanofiber woven fabric sensor in electronic skin for health monitoring, human motion detection, and muscle tremor detection.

| S-EPMC5636882 | biostudies-literature

Racquet Sports Recognition Using a Hybrid Clustering Model Learned from Integrated Wearable Sensor.

Project description:Racquet sports can provide positive benefits for human healthcare. A reliable detection device that can effectively distinguish movement with similar sub-features is therefore needed. In this paper, a racquet sports recognition wristband system and a multilayer hybrid clustering model are proposed to achieve reliable activity recognition and perform number counting. Additionally, a Bluetooth mesh network enables communication between a phone and wristband, and sets-up the connection between multiple devices. This allows users to track their exercise through the phone and share information with other players and referees. Considering the complexity of the classification algorithm and the user-friendliness of the measurement system, the improved multi-layer hybrid clustering model applies three-level K-means clustering to optimize feature extraction and segmentation and then uses the density-based spatial clustering of applications with noise (DBSCAN) algorithm to determine the feature center of different movements. The model can identify unlabeled and noisy data without data calibration and is suitable for smartwatches to recognize multiple racquet sports. The proposed system shows better recognition results and is verified in practical experiments.

| S-EPMC7146345 | biostudies-literature

Low-Cost and Highly Sensitive Wearable Sensor Based on Napkin for Health Monitoring.

Project description:The development of sensors with high sensitivity, good flexibility, low cost, and capability of detecting multiple inputs is of great significance for wearable electronics. Herein, we report a napkin-based wearable capacitive sensor fabricated by a novel, low-cost, and facile strategy. The capacitive sensor is composed of two pieces of electrode plates manufactured by spontaneous assembly of silver nanowires (NWs) on a polydimethylsiloxane (PDMS)-patterned napkin. The sensor possesses high sensitivity (>7.492 kPa-1), low cost, and capability for simultaneous detection of multiple signals. We demonstrate that the capacitive sensor can be applied to identify a variety of human physiological signals, including finger motions, eye blinking, and minute wrist pulse. More interestingly, the capacitive sensor comfortably attached to the temple can simultaneously monitor eye blinking and blood pulse. The demonstrated sensor shows great prospects in the applications of human-machine interface, prosthetics, home-based healthcare, and flexible touch panels.

| S-EPMC6695873 | biostudies-literature

Wearable piezoelectric mass sensor based on pH sensitive hydrogels for sweat pH monitoring.

Project description:Colorimetric and electrochemical (bio)sensors are commonly employed in wearable platforms for sweat monitoring; nevertheless, they suffer from low stability of the sensitive element. In contrast, mass-(bio)sensors are commonly used for analyte detection at laboratory level only, due to their rigidity. To overcome these limitations, a flexible mass-(bio)sensor for sweat pH sensing is proposed. The device exploits the flexibility of piezoelectric AlN membranes fabricated on a polyimide substrate combined to the sensitive properties of a pH responsive hydrogel based on PEG-DA/CEA molecules. A resonant frequency shift is recorded due to the hydrogel swelling/shrinking at several pH. Our device shows a responsivity of about 12 kHz/pH unit when measured in artificial sweat formulation in the pH range 3-8. To the best of our knowledge, this is the first time that hydrogel mass variations are sensed by a flexible resonator, fostering the development of a new class of compliant and wearable devices.

| S-EPMC7331702 | biostudies-literature

PANI@UiO-66 and PANI@UiO-66-NH2 Polymer-MOF Hybrid Composites as Tunable Semiconducting Materials.

Project description:This investigation explores optimum synthetic conditions for novel polymer-metal organic framework hybrid composites composed of Zr-terephthalate-based MOF UiO-66 and conductive polyaniline (PANI) nanofibers in an effort to optimize conductivity while minimizing MOF structural deformation. Successful syntheses of self-assembled PANI nanofibers in PANI@UiO-66 and PANI@UiO-66-NH2 composites were confirmed using scanning electron microscopy, infrared spectroscopy, and powder X-ray diffraction. The polymer-MOF composites show different bonding synergies to the PANI nanofibers depending on the organic linker used. Electronic properties of the post-synthetically modified PANI@UiO-66 and PANI@UiO-66-NH2 were investigated using UV-vis diffuse reflectance spectroscopy. Sheet resistivity of the self-assembled polymer-MOF composites was determined under an inert atmosphere at room temperature using four-point probe measurements to confirm tunable semiconductivity ranging from 40 to 2 mS/sq. Furthermore, the effects of aniline oxidation on the crystallinity and coordination of UiO-66 and UiO-66-NH2 were determined through analysis of these results.

| S-EPMC7114136 | biostudies-literature

A wearable and sensitive graphene-cotton based pressure sensor for human physiological signals monitoring.

Project description:Cotton fiber is the most commonly used fabric in textiles and clothing. As compared to inorganic materials like foam, sponge and paper, cotton fibers boast higher levels of flexibility and toughness, which makes it more durable and be better integrated with clothes. In this study, a conductive cotton fiber material modified by reduced graphene oxide (rGO) was prepared, and applied in pressure sensor. The highest sensitivity of the pressure sensor constructed is 0.21 kPa-1, and the pressure range covers up to 500 kPa, which demonstrates a combination of fine sensitivity and broader pressure range. The pressure sensor developed in this study demonstrates great performance in real-time monitoring of human physiological signals like pulse, breath rate and speech recognition, boasting great application value in wearable electronics and smart clothing.

| S-EPMC6783539 | biostudies-literature

Skin-Inspired Pressure Sensor with MXene/P(VDF-TrFE-CFE) as Active Layer for Wearable Electronics.

Project description:Multi-functional electronic skin is of paramount significance for wearable electronics in health monitoring, medical analysis, and human-machine interfacing systems. In order to achieve the function of natural skin, mechanical sensing with high sensitivity is an important feature of electronic skin. Inspired by the spinosum structure under the skin, herein, we fabricate a new capacitive pressure sensor with two-dimensional transition-metal carbides and nitrides (MXene) and ferroelectric polymer (P(VDF-TrFE-CFE)) as an active layer and micropatterned Cr-Au deposited on polydimethylsiloxane as flexible electrodes. Such a method is facile, effective, easily operated, and low-cost. The device design provides great capacitive change as a consequence of large deformation under pressure. Benefiting from the randomly distributed microstructure and high dielectric constant of the active layer, the device demonstrates high sensitivity with great linearity (16.0 kPa-1 for less than 10 kPa), that is, a low detection limit of 8.9 Pa, and quick response. A series of dynamic physiological signals, including typing, knuckle motion, and voice recognition can be facilely detected, making it a competitive candidate in the field of wearable electronics.

| S-EPMC7999094 | biostudies-literature

Wide Linearity Range and Highly Sensitive MEMS-Based Micro-Fluxgate Sensor with Double-Layer Magnetic Core Made of Fe⁻Co⁻B Amorphous Alloy.

Project description:This paper reports a novel micro-fluxgate sensor based on a double-layer magnetic core of a Fe⁻Co⁻B-based amorphous ribbon. The melt-spinning technique was carried out to obtain a Fe⁻Co⁻B-based amorphous ribbon composite of Fe58.1Co24.9B16Si₁, and the obtained amorphous ribbon was then annealed at 595 K for 1 h to benefit soft magnetic properties. The prepared ribbon showed excellent soft magnetic behavior with a high saturated magnetic intensity (Bs) of 1.74 T and a coercivity (Hc) of less than 0.2 Oe. Afterward, a micro-fluxgate sensor based on the prepared amorphous ribbon was fabricated via microelectromechanical systems (MEMS) technology combined with chemical wet etching. The resulting sensor exhibited a sensitivity of 1985 V/T, a wide linearity range of ±1.05 mT, and a perming error below 0.4 μT under optimal operating conditions with an excitation current amplitude of 70 mA at 500 kHz frequency. The minimum magnetic field noise was about 36 pT/Hz1/2 at 1 Hz under the same excitation conditions; a superior resolution of 5 nT was also achieved in the fabricated sensor. To the best of our knowledge, a compact micro-fluxgate sensor with such a high-resolution capability has not been reported elsewhere. The microsensor presented here with such improved characteristics may considerably enhance the development of micro-fluxgate sensors.

| S-EPMC6187929 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data