Browse
Submit Data
Databases
API
Help

Dataset Information

5 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Relationship between Young's Modulus and Planar Density of Unit Cell, Super Cells (2 × 2 × 2), Symmetry Cells of Perovskite (CaTiO₃) Lattice.

ABSTRACT: Calcium titanate-CaTiO₃ (perovskite) has been used in various industrial applications due to its dopant/doping mechanisms. Manipulation of defective grain boundaries in the structure of perovskite is essential to maximize mechanical properties and stability; therefore, the structure of perovskite has attracted attention, because without fully understanding the perovskite structure and diffracted planes, dopant/doping mechanisms cannot be understood. In this study, the areas and locations of atoms and diffracted planes were designed and investigated. In this research, the relationship between Young's modulus and planar density of unit cell, super cells (2 × 2 × 2) and symmetry cells of nano CaTiO₃ is investigated. Elastic constant, elastic compliance and Young's modulus value were recorded with the ultrasonic pulse-echo technique. The results were C₁₁ = 330.89 GPa, C₁₂ = 93.03 GPa, C₄₄ = 94.91 GPa and E = 153.87 GPa respectively. Young's modulus values of CaTiO₃ extracted by planar density were calculated 162.62 GPa, 151.71 GPa and 152.21 GPa for unit cell, super cells (2 × 2 × 2) and symmetry cells, respectively. Young's modulus value extracted by planar density of symmetry cells was in good agreement with Young's modulus value measured via ultrasonic pulse-echo.

SUBMITTER: Rabiei M

PROVIDER: S-EPMC7961767 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Specific membrane capacitance, cytoplasm conductivity and instantaneous Young's modulus of single tumour cells.

Project description:As label-free biomarkers, biophysical properties of cells are widely used for cell type classification. However, intrinsic biophysical markers, e.g., specific membrane capacitance (Cspecific membrane), cytoplasm conductivity (σconductivity) and instantaneous Young's modulus (Einstantaneous) measured for hundreds of single cells were not yet reported. In this study, single cells in suspension (adherent cells treated with trypsin) were aspirated through a microfluidic constriction channel at 25 °C, and the entry processes and impedance profiles were recorded and translated to Cspecific membrane, σconductivity and Einstantaneous. Cspecific membrane, σconductivity and Einstantaneous of five cell types were quantified as 2.10±0.38 μF cm-2, 0.91±0.15 S m-1 and 5.52±0.95 kPa for H460 cells (ncell=437); 2.52±0.54 μF cm-2, 0.83±0.12 S m-1 and 5.54±1.04 kPa for H446 cells (ncell=410); 2.45±0.57 μF cm-2, 0.99±0.18 S m-1 and 5.16±1.68 kPa for A549 cells (ncell=442); 1.86±0.31 μF cm-2, 1.07±0.18 S m-1 and 3.86±0.81 kPa for 95D cells (ncell=415); 2.03±0.35 μF cm-2, 0.99±0.16 S m-1 and 3.49±0.70 kPa for 95C cells (ncell=290). The database of Cspecific membrane, σconductivity and Einstantaneous may serve as a reference for future studies of cellular biophysical properties.

| S-EPMC5308201 | biostudies-literature

Unusually high ratio of shear modulus to Young's modulus in a nano-structured gyroid metamaterial.

Project description:Unlike the constant nature of elastic coefficients of isotropic bulk materials, the Young's (E) and shear (μ) moduli of nano-structured (NS) gyroid metamaterials change with relative density (ρ), but at different rates depending on the cell size of the structure. These elastic behaviors displayed by E and μ cause crossover/inversion of these two moduli, such that μ of the NS gyroid metamaterials is greater than E for the structures with ρ < 0.23. This peculiar elastic behavior causes NS gyroid metamaterials to display high μ/E values (~1.0), which are more than 250% larger than the typical values of the bulk material (~0.38), indicating that the NS gyroid metamaterial, even if it is light, is resistant to shear deformation. Here, we report the results of molecular dynamics simulations performed to elucidate the reason for unusually high μ/E values in NS gyroid metamaterials.

| S-EPMC5585398 | biostudies-literature

Machine learning assisted prediction of the Young's modulus of compositionally complex alloys.

Project description:We identify compositionally complex alloys (CCAs) that offer exceptional mechanical properties for elevated temperature applications by employing machine learning (ML) in conjunction with rapid synthesis and testing of alloys for validation to accelerate alloy design. The advantages of this approach are scalability, rapidity, and reasonably accurate predictions. ML tools were implemented to predict Young's modulus of refractory-based CCAs by employing different ML models. Our results, in conjunction with experimental validation, suggest that average valence electron concentration, the difference in atomic radius, a geometrical parameter λ and melting temperature of the alloys are the key features that determine the Young's modulus of CCAs and refractory-based CCAs. The Gradient Boosting model provided the best predictive capabilities (mean absolute error of 6.15 GPa) among the models studied. Our approach integrates high-quality validation data from experiments, literature data for training machine-learning models, and feature selection based on physical insights. It opens a new avenue to optimize the desired materials property for different engineering applications.

| S-EPMC8387451 | biostudies-literature

Biomechanical evaluation of Ti-Nb-Sn alloy implants with a low Young's modulus.

Project description:Dental implants are widely used and are a predictable treatment in various edentulous cases. Occlusal overload may be causally related to implant bone loss and a loss of integration. Stress concentrations may be diminished using a mechanobiologically integrated implant with bone tissue. The purpose of this study was to investigate the biomechanical behavior, biocompatibility and bioactivity of a Ti-Nb-Sn alloy as a dental implant material. It was compared with cpTi. Cell proliferation and alkaline phosphatase (ALP) activity were quantified. To assess the degree of osseointegration, a push-in test was carried out. Cell proliferation and ALP activity in the cells grown on prepared surfaces were similar for the Ti-Nb-Sn alloy and for cpTi in all the experiments. A comparison between the Ti-Nb-Sn alloy implant and the cpTi implant revealed that no significant difference was apparent for the push-in test values. These results suggest that implants fabricated using Ti-Nb-Sn have a similar biological potential as cpTi and are capable of excellent osseointegration.

| S-EPMC4394505 | biostudies-literature

Non-invasive imaging of Young's modulus and Poisson's ratio in cancers in vivo.

Project description:Alterations of Young's modulus (YM) and Poisson's ratio (PR) in biological tissues are often early indicators of the onset of pathological conditions. Knowledge of these parameters has been proven to be of great clinical significance for the diagnosis, prognosis and treatment of cancers. Currently, however, there are no non-invasive modalities that can be used to image and quantify these parameters in vivo without assuming incompressibility of the tissue, an assumption that is rarely justified in human tissues. In this paper, we developed a new method to simultaneously reconstruct YM and PR of a tumor and of its surrounding tissues based on the assumptions of axisymmetry and ellipsoidal-shape inclusion. This new, non-invasive method allows the generation of high spatial resolution YM and PR maps from axial and lateral strain data obtained via ultrasound elastography. The method was validated using finite element (FE) simulations and controlled experiments performed on phantoms with known mechanical properties. The clinical feasibility of the developed method was demonstrated in an orthotopic mouse model of breast cancer. Our results demonstrate that the proposed technique can estimate the YM and PR of spherical inclusions with accuracy higher than 99% and with accuracy higher than 90% in inclusions of different geometries and under various clinically relevant boundary conditions.

| S-EPMC7190860 | biostudies-literature

A Simple Extraction Method of Young's Modulus for Multilayer Films in MEMS Applications.

Project description:Based on the first resonance frequency measurement of multilayer beams, a simple extraction method has been developed to extract the Young's modulus of individual layers. To verify this method, the double-layer cantilever, as a typical example, is analyzed to simplify the situation and finite element modeling (FEM) is used in consideration of the buckling and unbuckling situation of cantilevers. The first resonance frequencies, which are obtained by ANSYS (15.0, ANSYS Inc., Pittsburgh, PA, USA) with a group of thirteen setting values of Young's modulus in the polysilicon layer are brought into the theoretical formulas to obtain a new group of Young's modulus in the polysilicon layer. The reliability and feasibility of the theoretical method are confirmed, according to the slight differences between the setting values and the results of the theoretical model. In the experiment, a series of polysilicon-metal double-layer cantilevers were fabricated. Digital holographic microscopy (DHM) (Lyncée Tech, Lausanne, Switzerland) is used to distinguish the buckled from the unbuckled. A scanning laser Doppler vibrometer (LDV) (Polytech GmbH, Berlin, Germany) system is used to measure the first resonance frequencies of them. After applying the measurement results into the theoretical modulus, the average values of Young's modulus in the polysilicon and gold layers are 151.78 GPa and 75.72 GPa, respectively. The extracted parameters are all within the rational ranges, compared with the available results.

| S-EPMC6190058 | biostudies-literature

The interfacial structure and Young's modulus of peptide films having switchable mechanical properties.

Project description:We report the structure and Young's modulus of switchable films formed by peptide self-assembly at the air-water interface. Peptide surfactant AM1 forms an interfacial film that can be switched, reversibly, from a high- to low-elasticity state, with rapid loss of emulsion and foam stability. Using neutron reflectometry, we find that the AM1 film comprises a thin (approx. 15A) layer of ordered peptide in both states, confirming that it is possible to drastically alter the mechanical properties of an interfacial ensemble without significantly altering its concentration or macromolecular organization. We also report the first experimentally determined Young's modulus of a peptide film self-assembled at the air-water interface (E=80MPa for AM1, switching to E<20MPa). These findings suggest a fundamental link between E and the macroscopic stability of peptide-containing foam. Finally, we report studies of a designed peptide surfactant, Lac21E, which we find forms a stronger switchable film than AM1 (E=335MPa switching to E<4MPa). In contrast to AM1, Lac21E switching is caused by peptide dissociation from the interface (i.e. by self-disassembly). This research confirms that small changes in molecular design can lead to similar macroscopic behaviour via surprisingly different mechanisms.

| S-EPMC2605502 | biostudies-literature

Pressure-Corrected Carotid Stiffness and Young's Modulus: Evaluation in an Outpatient Clinic Setting.

Project description:BackgroundConventional measures for assessing arterial stiffness are inherently pressure dependent. Whereas statistical pressure adjustment is feasible in (larger) populations, it is unsuited for the evaluation of an individual patient. Moreover, statistical "correction" for blood pressure may actually correct for: (i) the acute dependence of arterial stiffness on blood pressure at the time of measurement; and/or (ii) the remodeling effect that blood pressure (hypertension) may have on arterial stiffness, but it cannot distinguish between these processes.MethodsWe derived-assuming a single-exponential pressure-diameter relationship-3 theoretically pressure-independent carotid stiffness measures suited for individual patient evaluation: (i) stiffness index β0, (ii) pressure-corrected carotid pulse wave velocity (cPWVcorr), and (iii) pressure-corrected Young's modulus (Ecorr). Using linear regression analysis, we evaluated in a sample of the CATOD study cohort changes in mean arterial pressure (ΔMAP) and comparatively the changes in the novel (Δβ0, ΔcPWVcorr, and ΔEcorr) as well as conventional (ΔcPWV and ΔE) stiffness measures after a 2.9 ± 1.0-year follow-up.ResultsWe found no association between ΔMAP and Δβ0, ΔcPWVcorr, or ΔEcorr. In contrast, we did find a significant association between ΔMAP and conventional measures ΔcPWV and ΔE. Additional adjustments for biomechanical confounders and traditional risk factors did neither materially change these associations nor the lack thereof.ConclusionsOur newly proposed pressure-independent carotid stiffness measures avoid the need for statistical correction. Hence, these measures (β0, cPWVcorr, and Ecorr) can be used in a clinical setting for (i) patient-specific risk assessment and (ii) investigation of potential remodeling effects of (changes in) blood pressure on intrinsic arterial stiffness.

| S-EPMC8351507 | biostudies-literature

Estimations of the effective Young's modulus of specimens prepared by fused filament fabrication.

Project description:The elastic response of homogeneous isotropic materials is most commonly represented by their Young's modulus (E), but geometric variability associated with additive manufacturing results in materials that are neither homogeneous nor isotropic. Here we investigated methods to estimate the effective elastic modulus (Eeff) of samples fabricated by fused filament fabrication. We conducted finite element analysis (FEA) on printed samples based on material properties and CT-scanned geometries. The analysis revealed how the layer structure of a specimen altered the internal stress distribution and the resulting Eeff. We also investigated different empirical methods to estimate Eeff as guides. We envision the findings from our study can provide guidelines for modulus estimation of as-printed specimens, with the potential of applying to other extrusion-based additive manufacturing technologies.

| S-EPMC10938458 | biostudies-literature

Planar heterojunction perovskite solar cells with superior reproducibility.

Project description:Perovskite solar cells (PeSCs) have been considered one of the competitive next generation power sources. To date, light-to-electric conversion efficiencies have rapidly increased to over 10%, and further improvements are expected. However, the poor device reproducibility of PeSCs ascribed to their inhomogeneously covered film morphology has hindered their practical application. Here, we demonstrate high-performance PeSCs with superior reproducibility by introducing small amounts of N-cyclohexyl-2-pyrrolidone (CHP) as a morphology controller into N,N-dimethylformamide (DMF). As a result, highly homogeneous film morphology, similar to that achieved by vacuum-deposition methods, as well as a high PCE of 10% and an extremely small performance deviation within 0.14% were achieved. This study represents a method for realizing efficient and reproducible planar heterojunction (PHJ) PeSCs through morphology control, taking a major step forward in the low-cost and rapid production of PeSCs by solving one of the biggest problems of PHJ perovskite photovoltaic technology through a facile method.

| S-EPMC4223662 | biostudies-other