Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Statistical Copolymers of N-Vinylpyrrolidone and Isobornyl Methacrylate via Free Radical and RAFT Polymerization: Monomer Reactivity Ratios, Thermal Properties, and Kinetics of Thermal Decomposition.

ABSTRACT: The synthesis of statistical copolymers of N-vinylpyrrolidone (NVP) with isobornyl methacrylate (IBMA) was conducted by free radical and reversible addition-fragmentation chain transfer (RAFT) polymerization. The reactivity ratios were estimated using the Finemann-Ross, inverted Fineman-Ross, Kelen-Tüdos, extended Kelen-Tüdos and Barson-Fenn graphical methods, along with the computer program COPOINT, modified to both the terminal and the penultimate models. According to COPOINT the reactivity ratios were found to be equal to 0.292 for NVP and 2.673 for IBMA for conventional radical polymerization, whereas for RAFT polymerization and for the penultimate model the following reactivity ratios were obtained: r₁₁ = 4.466, r₂₂ = 0, r₂₁ = 14.830, and r₁₂ = 0 (1 stands for NVP and 2 for IBMA). In all cases, the NVP reactivity ratio was significantly lower than that of IBMA. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions and the mean sequence length. The thermal properties of the copolymers were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and differential thermogravimetry (DTG). The results were compared with those of the respective homopolymers.

SUBMITTER: Kokkorogianni O

PROVIDER: S-EPMC7961878 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Chemoselective polymerization control: from mixed-monomer feedstock to copolymers.

Project description:A novel chemoselective polymerization control yields predictable (co)polymer compositions from a mixture of monomers. Using a dizinc catalyst and a mixture of caprolactone, cyclohexene oxide, and carbon dioxide enables the selective preparation of either polyesters or polycarbonates or copoly(ester-carbonates). The selectivity depends on the nature of the zinc-oxygen functionality at the growing polymer chain end, and can be controlled by the addition of exogeneous switch reagents.

| S-EPMC4232277 | biostudies-literature

Synthesis and Study of Thermoresponsive Amphiphilic Copolymers via RAFT Polymerization.

Project description:Synthesis and study of well-defined thermoresponsive amphiphilic copolymers with various compositions were reported. Kinetics of the reversible addition-fragmentation chain transfer (RAFT) (co)polymerization of styrene (St) and oligo(ethylene glycol) methyl ether methacrylate (PEO5MEMA) was studied by size exclusion chromatography (SEC) and 1H NMR spectroscopy, which allows calculating not only (co)polymerization parameters but also gives valuable information on RAFT (co)polymerization kinetics, process control, and chain propagation. Molecular weight Mn and dispersity Đ of the copolymers were determined by SEC with triple detection. The detailed investigation of styrene and PEO5MEMA (co)polymerization showed that both monomers prefer cross-polymerization due to their low reactivity ratios (r1 < 1, r2 < 1); therefore, the distribution of monomeric units across the copolymer chain of p(St-co-PEO5MEMA) with various compositions is almost ideally statistical or azeotropic. The thermoresponsive properties of p(St-co-PEO5MEMA) copolymers in aqueous solutions as a function of different hydrophilic/hydrophobic substituent ratios were evaluated by measuring the changes in hydrodynamic parameters under applied temperature using the dynamic light scattering method (DLS).

| S-EPMC8777995 | biostudies-literature

Synthesis and self-assembly of temperature-responsive copolymers based on N-vinylpyrrolidone and triethylene glycol methacrylate.

Project description:Polyvinylpyrrolidone (PVP) is a biocompatible, water-soluble polymer with unique physicochemical properties and attractive biological features that has found widespread use in several industries. Owing to advances in controlled polymerisation techniques, PVP can be easily synthesised with robust control over its architecture. However, the synthesis of PVP copolymers, which can allow tailoring of its properties and expand the scope of this polymeric material, is challenging and rarely reported. Here, we demonstrate the synthesis of well-defined, temperature-responsive polyvinylpyrrolidone-co-poly(triethylene glycol methacrylate) (PVP-co-pTEGMA) block copolymers via successive Reversible Addition-Fragmentation chain Transfer (RAFT) and Activators ReGenerated by Electron Transfer Atom Transfer Radical Polymerisation (ARGET-ATRP) techniques. We show that PVP-co-pTEGMA block copolymers display temperature-responsive behaviour and self-assemble above their cloud point temperature (Tcp) to form spherical nanostructures of 100-200 nm in diameter. Finally, we demonstrate stabilisation of these assemblies below their Tcp by cross-linking through the PVP block.

| S-EPMC5408929 | biostudies-literature

Metallocene-Containing Homopolymers and Heterobimetallic Block Copolymers via Photoinduced RAFT Polymerization.

Project description:We report the synthesis of cationic cobaltocenium and neutral ferrocene containing homopolymers mediated by photoinduced reversible addition-fragmentation chain transfer (RAFT) polymerization with a photocatalyst fac-[Ir(ppy)3]. The homopolymers were further used as macromolecular chain transfer agents to synthesize diblock copolymers via chain extension. Controlled/"living" feature of photoinduced RAFT polymerization was confirmed by kinetic studies even without prior deoxygenation. A light switch between ON and OFF provided a spatiotemporal control of polymerization.

| S-EPMC5739086 | biostudies-literature

Blue Light-Initiated Alcoholic RAFT Dispersion Polymerization of Benzyl Methacrylate: A Detailed Study.

Project description:Blue light-initiated alcoholic reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate (BzMA) using bis (acyl) phosphane oxide (BAPO) as the photo-initiator is developed to prepare diblock copolymer nano-objects. High monomer conversion (95%) was achieved within 2 h of blue light irradiation in an isopropanol/water mixture. Effects of solvent, light intensity, and reaction temperature on the polymerization kinetics were evaluated. Finally, the effect of reaction temperature on the morphologies of diblock copolymer nano-objects was investigated and two morphological phase diagrams were constructed at 25 and 70 °C. Transmission electron microscopy (TEM) measurement confirmed that increasing the reaction temperature promoted the evolution of higher order morphology. We believe this study will provide more mechanistic insights into alcoholic RAFT dispersion polymerization for the creation of diblock copolymer nano-objects with well-defined structures.

| S-EPMC6723682 | biostudies-literature

RAFT Polymerization of Tert-Butyldimethylsilyl Methacrylate: Kinetic Study and Determination of Rate Coefficients.

Project description:Well-defined poly(tert-butyldimethylsilyl methacrylate)s (TBDMSMA) were prepared by the reversible addition-fragmentation chain transfer (RAFT) process using cyanoisopropyl dithiobenzoate (CPDB) as chain-transfer agents (CTA). The experimentally obtained molecular weight distributions are narrow and shift linearly with monomer conversion. Propagation rate coefficients (kp) and termination rate coefficients (kt) for free radical polymerization of TBDMSMA have been determined for a range of temperature between 50 and 80 °C using the pulsed laser polymerization-size-exclusion chromatography (PLP-SEC) method and the kinetic method via steady-state rate measurement, respectively. The CPDB-mediated RAFT polymerization of TBDMSMA has been subjected to a combined experimental and PREDICI modeling study at 70 °C. The rate coefficient for the addition reaction to RAFT agent (kβ1, kβ2) and to polymeric RAFT agent (kβ) is estimated to be approximately 1.8 × 10⁴ L·mol-1·s-1 and for the fragmentation reaction of intermediate RAFT radicals in the pre-equilibrium (k-β1, k-β2) and main equilibrium (k-β) is close to 2.0 × 10-2 s-1. The transfer rate coefficient (ktr) to cyanoisopropyl dithiobenzoate is found to be close to 9.0 × 10³ L·mol-1·s-1 and the chain-transfer constant (Ctr) for CPDB-mediated RAFT polymerization of TBDMSMA is about 9.3.

| S-EPMC6414831 | biostudies-literature

Enhanced synthesis of multiblock copolymers <i>via</i> acid-triggered RAFT polymerization.

Project description:The synthesis of multiblock copolymers has emerged as an efficient tool to not only reveal the optimal way to access complex structures and investigate polymer properties but also to ascertain the end-group fidelity of a given polymerization methodology. Although reversible addition-fragmentation chain-transfer (RAFT) polymerization is arguably the most dominant strategy employed, its success is often hampered by the unavoidable and excessive use of radical initiators which results in increased termination and loss of end-group fidelity. In this work, we employ acid in RAFT polymerization to enhance the synthesis of multiblock copolymers. By the addition of a small amount of acid, a 4-fold decrease in the overall required radical initiator concentration was achieved, enabling the synthesis of a range of well-defined multiblock copolymers with various degrees of polymerization (DP) per block. The acid enhances the propagation rate, minimizing the initiator concentration. In all cases, near-quantitative monomer conversion was obtained (>97%) for every iterative block formation step. Notably, and in contrast to conventional RAFT approaches, the tailing to low molecular weight was significantly suppressed and the dispersity was maintained nearly constant (i.e. in most cases Đ = 1.1-1.2), thus indicating minor termination events and side reactions during acid-enhanced synthesis. The possibility to synthesize multiblocks consisting of methacrylates, acrylates, and acrylamides was also demonstrated. This work presents an advancement in the synthesis of well-defined multiblock copolymers and more broadly, RAFT polymers with high end-group fidelity.

| S-EPMC10967258 | biostudies-literature

Synthesis of Poly(N-vinylpyrrolidone)-Based Polymer Bottlebrushes by ATRPA and RAFT Polymerization: Toward Drug Delivery Application.

Project description:Atom transfer radical polyaddition (ATRPA) was utilized herein to synthesize a specific functional polyester. We conducted ATRPA of 4-vinylbenzyl 2-bromo-2-phenylacetate (VBBPA) inimer and successfully obtained a linear type poly(VBBPA) (PVBBPA) polyester with benzylic bromides along the backbone. To obtain a novel amphiphilic polymer bottlebrush, however, the lateral ATRP chain extension of PVBBPA with N-vinyl pyrrolidone (NVP) met the problem of quantitative dimerization. By replacing the bromides to xanthate moieties efficiently, we thus observed a pseudo linear first order reversible addition-fragmentation chain transfer (RAFT) polymerization to obtain novel poly(4-vinylbenzyl-2-phenylacetate)-g-poly(NVP) (PVBPA-g-PNVP) amphiphilic polymer bottlebrushes. The critical micelle concentration (CMC) and particle size of the amphiphilic polymer bottlebrushes were characterized by fluorescence spectroscopy, dynamic light scattering (DLS), and scanning electron microscopy (SEM) (CMCs < 0.5 mg/mL; particle sizes = ca. 100 nm). Toward drug delivery application, we examined release profiles using a model drug of Nile red at different pH environments (3, 5, and 7). Eventually, low cytotoxicity and well cell uptake of the Madin-Darby Canine Kidney Epithelial (MDCK) for the polymer bottlebrush micelles were demonstrated.

| S-EPMC6631111 | biostudies-literature

Synthesis and Aqueous Solution Properties of an Amino Bisphosphonate Methacrylate Homopolymer via RAFT Polymerization.

Project description:The present contribution reports on the synthesis via reversible addition-fragmentation chain transfer (RAFT) polymerization of a methacrylate derivative bearing an aminobisphosponate moiety as a pendant group, namely, ethyl N,N-tetramethylbis(phosphonate)-bis(methylene) amine methacrylate (MAC₂NP₂). The polymerization was performed by the use of cyanoisopropyl dithiobenzoate as chain transfer agent at 70 °C in various solvents with different polarities including N,N-dimethylformamide, acetonitrile, tetrahydrofuran, and in bulk. Best results were obtained in N,N-dimethylformamide where higher conversions and polymerization rates were noticed. The successful hydrolysis of the phosphonate ester groups was performed using bromotrimethylsilane with excellent yields leading to the formation of highly water soluble and pH-responsive polymers. Finally, a preliminary solution behavior study was carried out by investigating the aqueous solution properties of synthesized amino bisphosphonate methacrylate homopolymers and their phosphonic acid analogs via potentiometric titration and zeta potential measurements.

| S-EPMC6404032 | biostudies-literature

Electrochemically-Initiated RAFT Synthesis of Low Dispersity Multiblock Copolymers by Seeded Emulsion Polymerization.

Project description:We describe electrochemically initiated emulsion polymerization with reversible addition-fragmentation chain transfer (eRAFT) to form well-defined multiblock copolymers with low molar mass dispersity. We demonstrate the utility of our emulsion eRAFT process with the synthesis of low dispersity multiblock copolymers by seeded RAFT emulsion polymerization at ambient temperature (∼30 °C). Thus, a triblock, poly(butyl methacrylate)-block-polystyrene-block-poly(4-methylstyrene) [PBMA-b-PSt-b-PMS], and a tetrablock, poly(butyl methacrylate)-block-polystyrene-block-poly(styrene-stat-butyl acrylate)-block-polystyrene [PBMA-b-PSt-b-P(BA-stat-St)-b-PSt], were synthesized as free-flowing, colloidally stable latexes commencing with a surfactant-free poly(butyl methacrylate) macroRAFT agent seed latex. A straightforward sequential addition strategy with no intermediate purification steps was able to be employed due to the high monomer conversions achieved in each step. The method takes full advantage of compartmentalization phenomena and the nanoreactor concept described in previous work to achieve the predicted molar mass, low molar mass dispersity (Đ ∼ 1.1-1.2), incrementing particle size (Zav = 100-115 nm), and low particle size dispersity (PDI ∼ 0.02) for each generation of the multiblocks.

| S-EPMC10035029 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data