Modification of Polylactide Nonwovens with Carbon Nanotubes and Ladder Poly(silsesquioxane).
Ontology highlight
ABSTRACT:
SUBMITTER: Svyntkivska M
PROVIDER: S-EPMC7961909 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:It was shown that carbon nonwoven fabrics obtained from polyacrylonitrile fibers (PAN) by thermal conversion may be modified on the surface in order to improve their biological compatibility and cellular response, which is particularly important in the regeneration of bone or cartilage tissue. Surface functionalization of carbon nonwovens containing C-C double bonds was carried out using in situ generated diazonium salts derived from aromatic amines containing both electron-acceptor and electron-donor substituents. It was shown that the modification method characteristic for materials containing aromatic structures may be successfully applied to the functionalization of carbon materials. The effectiveness of the surface modification of carbon nonwoven fabrics was confirmed by the FTIR method using an ATR device. The proposed approach allows the incorporation of various functional groups on the nonwovens' surface, which affects the morphology of fibers as well as their physicochemical properties (wettability). The introduction of a carboxyl group on the surface of nonwoven fabrics, in a reaction with 4-aminobenzoic acid, became a starting point for further modifications necessary for the attachment of RGD-type peptides facilitating cell adhesion to the surface of materials. The surface modification reduced the wettability (θ) of the carbon nonwoven by about 50%. The surface free energy (SFE) in the chemically modified and reference nonwovens remained similar, with the surface modification causing an increase in the polar component (ɣp). The modification of the fiber surface was heterogeneous in nature; however, it provided an attractive site of cell-materials interaction by contacting them to the fiber surface, which supports the adhesion process.
| S-EPMC8230386 | biostudies-literature
Project description:This article demonstrates a novel nanoscale surface modification method to enhance the selectivity of porous poly(dimethylsiloxane) (PDMS) in removing oil from water. The surface modification method is simple and low cost by using sugar as a sacrificial template for temporal adhering of carbon nanotubes (CNT) before addition of PDMS prepolymer to encapsulate the CNT on its surface once polymerized. The PDMS-CNT demonstrated a tremendous increase in absorption capacity up to 3-fold compared to previously reported absorbents composed solely of PDMS. Besides showcasing excellent absorption capacity, the PDMS-CNT also shows a faster absorption rate (25 s) as compared to that of pure PDMS (40 s). The enhanced absorption rate is due to the incorporation of CNT, which roughens the surface of the polymer at the nanoscale and lowers the surface energy of porous PDMS while at the same time increasing the absorbent hydrophobicity and oleophilicity. This property makes the absorbent unique in absorbing only oil but repelling water at the same time. The PDMS-CNT is an excellent absorbent material with outstanding recyclability and selectivity for removing oil from water.
| S-EPMC6643743 | biostudies-literature
Project description:A series of UV-curable hybrid composite blends containing a carboxylic acid functionalized polyimidewith varying amounts of high molecular weight (~1 K) PEG-grafted ladder-structured polysilsesquioxanes copolymerized with methacryl groups were fabricated and their structural, thermal, mechanical, and surface properties characterized. At a composite weight ratio of polyimide above 50 wt.%, a stark shift from amorphous to crystalline polyethylene glycol (PEG) phases were observed, accompanied by a drastic increase in both surface moduli and brittleness index. Moreover, fabricated composites were shown to have a wide range water contact angle, 9.8°-73.8°, attesting to the tunable surface properties of these amphiphilic hybrid polymer composites. The enhanced mechanical properties, combined with the utility of tunable surface hydrophilicity allows for the possible use of these hybrid polymer composites to be utilized as photosensitive polyimide negative photoresists for a myriad of semiconductor patterning processes.
| S-EPMC7287875 | biostudies-literature
Project description:Nanotubes were prepared by self-assembly of the copolymer using co-solvent evaporation method. The biocompatibility of the nanotubes was assessed in comparison with spherical micelles and filomicelles prepared from poly(ethylene glycol)-poly(L-lactide-co-glycolide) (PEG-PLGA) and poly(ethylene glycol)-poly(L-lactide) (PEG-PLA), respectively. Several aspects of biocompatibility of the aggregates were considered, including agar diffusion and MTT assay, release of cytokines, hemolysis, protein adsorption, dynamic clotting in vitro, and Zebrafish embryonic compatibility in vivo. The nanotubes present good cell compatibility and blood compatibility in vitro, and almost no toxicity towards Zebrafish embryos development in vivo. Furthermore, dual-loading of hydrophilic cisplatin and hydrophobic paclitaxel was achieved in the nanotubes with high loading content and loading efficiency. The release of both drugs was slower from dual-loaded nanotubes than from single-loaded ones, but the total amount of released drugs in higher for dual-loaded nanotubes than from single-loaded ones. Cellular uptake and inhibition tests showed that the nanotubes were successfully taken up by tumor cells and effectively inhibited cell growth. It is thus concluded that PEG-PLA-PEG nanotubes with outstanding biocompatibility could be promising for co-delivery of hydrophilic and hydrophobic agents in combination cancer therapy.
| S-EPMC6978636 | biostudies-literature
Project description:From the viewpoint of green chemistry and environmental chemistry, an important challenge in the field of superhydrophobic materials is to create them with only bio-based molecules. We developed superhydrophobic and chemically stable poly(L-phenylalanine) (PolyPhe) nonwovens by electrospinning. PolyPhe was selected because, due to its very rigid chemical structure, it is one of the toughest and most hydrophobic polymers among polymers composed only of amino acids. The water contact angle on the nonwovens is a maximum of 160°, and the droplets are stably adhered and remain still on the nonwoven surface even if it is turned over, thereby suggesting a petal-type superhydrophobicity. The nonwovens show a good chemical stability, and their weight remains unchanged after 5 days immersion in acidic (pH 2) and basic (pH 12) conditions. In addition, the superhydrophobic property is not lost even after the alkali treatment. Such tough superhydrophobic materials are intriguing for further biomedical and environmental applications.
| S-EPMC6290602 | biostudies-literature
Project description:The effect of polyhedral oligomeric silsesquioxane (POSS) on the synthesis and properties of hybrid organic-inorganic ionogels was investigated using octakis(methacryloxypropyl) silsesquioxane (methacryl-POSS). Ionogels were prepared in situ by thiol-ene photopolymerization of triallyl isocyanurate with pentaerythritol tetrakis(3-mercaptopropionate) in a mixture of imidazolium ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMImNTf2) and propylene carbonate (PC). Investigations included the kinetics of hybrid materials formation and selected physical and mechanical properties. The disadvantage of ionogels without the methacryl-POSS modifier is leakage and insufficient mechanical properties. Modifying the thiol-ene matrix by the addition of methacryl-POSS made it possible to obtain non-leaking ionogels with improved mechanical and conductive properties. The steric hindrance of POSS cages and high-density network formation played important roles in ionogel synthesis: decrease of polymerization rate (with almost no effect on conversion), as well as dimensions of the formed polymer spheres during dispersion polymerization (highly cross-linked polymer has poorer solubility in polymerizing medium at a similar conversion, and nucleation begins at lower conversion), an increase of glass transition temperature and puncture strength. Hybrid ionogels with high ionic conductivity in the range of 4.0-5.1 mS∙cm-1 with the maximum parameter for 1.5 wt.% addition of the methacryl-POSS were obtained, which can be associated with ion-pair dissociations in ionic liquid clusters caused by methacryl-POSS.
| S-EPMC7865288 | biostudies-literature
Project description:Growth of high quality, dense carbon nanotube (CNT) arrays via catalytic chemical vapor deposition (CCVD) has been largely limited to catalysts supported on amorphous alumina or silica. To overcome the challenge of conducting CNT growth from catalysts supported on conductive substrates, we explored a two-step surface modification that involves ion beam bombardment to create surface porosity and deposition of a thin AlxOy barrier layer to make the surface basic. To test the efficacy of our approach on a non-oxide support, we focus on modification of 316 stainless steel (SS), a well-known inactive substrate for CNT growth. Our study reveals that ion beam bombardment of SS has the ability to reduce film thickness of the AlxOy barrier layer required to grow CNTs from Fe catalysts to [Formula: see text] 5?nm, which is within the threshold for the substrate to remain conductive. Additionally, catalysts supported on ion beam-damaged SS with the same AlxOy thickness show improved particle formation, catalyst stability, and CNT growth efficiency, as well as producing CNTs with higher quality and density. Under optimal reaction conditions, this modification approach can lead to CNT growth on other nontraditional substrates and potentially benefit applications that require CNTs be grown on a conductive substrate.
| S-EPMC5847581 | biostudies-literature
Project description:This paper illustrates the potential of Ag nanoparticles based nanocomposites to use as effective agents in photothermal therapy apart from their traditional employment as antimicrobial materials. Herein an Near- Infrared active photothermal agent was fabricated by deposition of Ag nanoparticles over aromatic poly(amidoamine) grafted carbon nanotubes. Thus prepared CNTs-PAMAM-Ag possessed strong photothermal effect under exposure to 980 nm laser system and prominent photothermal stability. The photothermal conversion efficiency of CNTs-PAMAM-Ag was found to be higher than readily used Au and CuS based photothermal agents. The photothermal effect of CNTs-PAMAM-Ag was substantial in presence of 980 nm laser compared to 808 nm laser and a linear dependence of photothermal effect on its concentration was identified. The maximum temperature attained by CNTs-PAMAM-Ag during assessment of its photothermal effect was about 66.0 °C, which is significantly higher than the survival temperature level of cancer cells. So CNTs-PAMAM-Ag could be a promising photothermal agent to apply in future photothermal hyperthermia therapy to treat cancer. Moreover CNTs-PAMAM-Ag can synchronous trigger by a single wavelength (980 nm) laser system, so it could simplify the future therapeutic process.
| S-EPMC6484833 | biostudies-literature
Project description:The demand for eco-friendly poly (lactic acid) (PLA) nonwovens grows at a high rate in the past several decades, however, only a little attention has been received for flame retardant PLA nonwoven fabrics. In this work, a novel halogen-free self-intumescent polyelectrolyte tris (hydroxymethyl)-aminomethane polyphosphate (APTris) was synthesized by reacting ammonium polyphosphate with tris (hydroxymethyl) aminomethane, and was then used to improve the fire resistance of PLA nonwovens via a dip-nip process. The flammability characterization indicated the limiting oxygen index value was increased to 30.0% from 18.3%, and the damaged area in the vertical burning test was reduced by about 87.0% by the presence of APTris. The cone calorimeter test results revealed that the peak heat release rate and total heat release of the treated sample were decreased by 41.0% and 28.2% respectively compared with that of the control PLA nonwoven sample. The char residue was increased to 12.3 from 1.7 wt % at 800 °C. It is suggested that the dense char barrier formed at the presence of APTris prevents heat, smoke, and gas transfer, and hence enhance thermal dilatability and flame retardancy of PLA nonwovens. This simple sustainable halogen-free treatment has great potential to produce cleaner commercialized flame-retardant PLA nonwovens.
| S-EPMC7529633 | biostudies-literature
Project description:Abstract: This work considers the development of an easy and scalable approach to change the features of poly(l-lactide) (PLLA) films, which is based on the application of a surface treatment with an amino-functionalized polyhedral oligomeric silsesquioxane (POSS). Indeed, the developed approach is based on the potential reactivity of POSS amino group towards the polymer functionalities to produce an aminolysis reaction, which should promote the direct grafting of the silsesquioxane molecules on the polymer surface. Neat and treated films were studied by infrared spectroscopy and X-ray photoelectron spectroscopy, which proved the effectiveness of POSS grafting. Moreover, scanning electron microscopy measurements demonstrated the homogeneous distribution of Si on the film surface treated with the silsesquioxane. The influence of the film treatment on the surface wettability was evidenced by contact angle measurements. These findings demonstrated a relevant enhancement of the surface hydrophobicity, which increase turned out to depend on the conditions applied, as it increased by increasing the reaction temperature and the contact time. Finally, in order to evaluate the stability of neat and of the treated PLLA films the surface morphology of the samples treated with pH 7.4 buffer at 50 °C was studied.
| S-EPMC6723249 | biostudies-other