Structure-Property Relationship of Polymerized Ionic Liquids for Solid-State Electrolyte Membranes.
Ontology highlight
ABSTRACT:
SUBMITTER: Lowe R
PROVIDER: S-EPMC7961940 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Ionic liquids are highly charged compounds with increasing applications in material science. A universal approach to synthesize free-standing, vinylalkylimidazolium bromide-containing membranes with an adjustable thickness is presented. By the variation of alkyl side chains, membrane characteristics such as flux and mechanical properties can be adjusted. The simultaneous use of different ionic liquids (ILs) in the synthesis can also improve the membrane properties. In separation application, these charged materials allowed us to retain charged sugars, such as calcium gluconate, by up to 95%, while similar neutral compounds such as glucose passed the membrane. An analysis of the surface conditions using atomic force microscopy (AFM) confirmed the experimental data and explains the decreasing permeance and increased retention of the charged sugars.
| S-EPMC7692284 | biostudies-literature
Project description:Polymerized ionic liquids (PILs) show potential to be used as new water-free polyelectrolyte-based electrorheological (ER) material. To direct ER material design at the molecular level, unveiling structure-property relationships is essential. While a few studies compare the mobile ions in PILs there is still a limited understanding of how the structure of tethered counterions on backbone influences ER property. In this study, three PILs with same mobile anions but different tethered countercations (e.g., poly(dimethyldiallylammonium) P[DADMA]+, poly(benzylethyl) trimethylammonium P[VBTMA]+, and poly(1-ethyl-4-vinylimidazolium hexafluorophosphate) P[C2VIm]+) are prepared and the influence of tethered countercations on the ER property of PILs is investigated. It shows that among these PILs, P[DADMA]+ PILs have the strongest ER property and P[C2VIm]+ PILs have the weakest one. By combining dielectric spectra analysis with DFT calculation and activation energy measurement, it can clarify that the influence of tethered counterions on ER property is mainly associated with ion-pair interaction energy that is affecting ionic conductivity and interfacial polarization induced by ion motion. P[DADMA]+ has the smallest ion-pair interaction energy with mobile ions, which can result in the highest ionic conductivity and the fastest interfacial polarization rate for its strongest ER property.
| S-EPMC7356505 | biostudies-literature
Project description:The ability to efficiently separate CO2 from other light gases using membrane technology has received a great deal of attention due to its importance in applications such as improving the efficiency of natural gas and reducing greenhouse gas emissions. A wide range of materials has been employed for the fabrication of membranes. This paper highlights the work carried out to develop novel advanced membranes with improved separation performance. We integrated a polymerizable and amino acid ionic liquid (AAIL) with zeolite to fabricate mixed matrix membranes (MMMs). The MMMs were prepared with (vinylbenzyl)trimethylammonium chloride [VBTMA][Cl] and (vinylbenzyl)trimethylammonium glycine [VBTMA][Gly] as the polymeric support with 5 wt% zeolite particles, and varying concentrations of 1-butyl-3-methylimidazolium glycine, [BMIM][Gly] (5-20 wt%) blended together. The membranes were fabricated through photopolymerization. The extent of polymerization was confirmed using FTIR. FESEM confirmed the membranes formed are dense in structure. The thermal properties of the membranes were measured using TGA and DSC. CO2 and CH4 permeation was studied at room temperature and with a feed side pressure of 2 bar. [VBTMA][Gly]-based membranes recorded higher CO2 permeability and CO2/CH4 selectivity compared to [VBTMA][Cl]-based membranes due to the facilitated transport of CO2. The best performing membrane Gly-Gly-20 recorded permeance of 4.17 GPU and ideal selectivity of 5.49.
| S-EPMC10974021 | biostudies-literature
Project description:Rechargeable lithium-ion batteries have drawn extensive attention owing to increasing demands in applications from portable electronic devices to energy storage systems. In situ polymerization is considered one of the most promising approaches for enabling interfacial issues and improving compatibility between electrolytes and electrodes in batteries. Herein, we observed in situ thermally induced electrolytes based on an oxetane group with LiFSI as an initiator, and investigated structural characteristics, physicochemical properties, contacting interface, and electrochemical performances of as-prepared SPEs with a variety of technologies, such as FTIR, 1H-NMR, FE-SEM, EIS, LSV, and chronoamperometry. The as-prepared SPEs exhibited good thermal stability (stable up to 210 °C), lower activation energy, and high ionic conductivity (>0.1 mS/cm) at 30 °C. Specifically, SPE-2.5 displayed a comparable ionic conductivity (1.3 mS/cm at 80 °C), better interfacial compatibility, and a high Li-ion transference number. The SPE-2.5 electrolyte had comparable coulombic efficiency with a half-cell configuration at 0.1 C for 50 cycles. Obtained results could provide the possibility of high ionic conductivity and good compatibility through in situ polymerization for the development of Li-ion batteries.
| S-EPMC8955661 | biostudies-literature
Project description:Electrode-polymer interfaces dictate many of the properties of thin films such as capacitance, the electric field experienced by polymers, and charge transport. However, structure and dynamics of charged polymers near electrodes remain poorly understood, especially in the high concentration limit representative of the melts. To develop an understanding of electric field–induced transformations of electrode-polymer interfaces, we have studied electrified interfaces of an imidazolium-based polymerized ionic liquid (PolyIL) using combinations of broadband dielectric spectroscopy, specular neutron reflectivity, and simulations based on the Rayleigh’s dissipation function formalism. Overall, we obtained the camel-shaped dependence of the capacitance on applied voltage, which originated from the responses of an adsorbed polymer layer to applied voltages. This work provides additional insights related to the effects of molecular weight in affecting structure and properties of electrode-polymer interfaces, which are essential for designing next-generation energy storage and harvesting devices.
| S-EPMC7319767 | biostudies-literature
Project description:All-solid-state secondary batteries that employ inorganic solid electrolytes are desirable because they are potentially safer than conventional batteries. The ionic conductivities of solid electrolytes are currently attracting great attention. In addition to the conductivity, the mechanical properties of solid electrolytes are important for improving the energy density and cycle performance. However, the mechanical properties of sulfide electrolytes have not been clarified in detail. Here, we demonstrate the unique mechanical properties of sulfide electrolytes. Sulfide electrolytes show room temperature pressure sintering. Ionic materials with low bond energies and a highly covalent character, which is promising for achieving a high ionic conductivity, tend to be suitable for room-temperature processing. The Young's moduli of sulfide electrolytes were measured to be about 20?GPa, which is an intermediate value between those of typical oxides and organic polymers.
| S-EPMC3719077 | biostudies-literature
Project description:Room temperature ionic liquids of cyclic sulfonimide anions ncPFSI (ring size: n = 4-6) with the cations [EMIm]+ (1-ethyl-3-methylimidazolium), [BMIm]+ (1-butyl-3-methylimidazolium) and [BMPL]+ (BMPL = 1-butyl-1-methylpyrrolidinium) have been synthesized. Their solid-state structures have been elucidated by single-crystal X-ray diffraction and their physicochemical properties (thermal behaviour and stability, dynamic viscosity and specific conductivity) have been assessed. In addition, the ion diffusion was studied by pulsed field gradient stimulated echo (PFGSTE) NMR spectroscopy. The decisive influence of the ring size of the cyclic sulfonimide anions on the physicochemical properties of the ILs has been revealed. All ILs show different properties compared to those of the non-cyclic TFSI anion. While these differences are especially distinct for ILs with the very rigid 6cPFSI anion, the 5-membered ring anion 5cPFSI was found to result in ILs with relatively similar properties. The difference between the properties of the TFSI anion and the cyclic sulfonimide anions has been rationalized by the rigidity (conformational lock) of the cyclic sulfonimide anions. The comparison of selected IL properties was augmented by MD simulations. These highlight the importance of π+-π+ interactions between pairs of [EMIm]+ cations in the liquid phase. The π+-π+ interactions are evident for the solid state from the molecular structures of the [EMIm]+-ILs with the three cyclic imide anions determined by single-crystal X-ray diffraction.
| S-EPMC9945419 | biostudies-literature
Project description:Hydrogels are one of the emerging classes of materials in current research. Besides their numerous applications in the medical sector as a drug delivery system or in tissue replacement, they are also suitable as irrigation components or as immobilization matrices in catalysis. For optimal application of these compounds, knowledge of the swelling properties and the diffusion mechanisms occurring in the gels is mandatory. This study is focused on hydrogels synthesized by radical polymerization of imidazolium-based ionic liquids. Both the swelling and diffusion behavior of these hydrogels were investigated via gravimetric swelling as well as sorption experiments implemented in water, ethanol, n-heptane, and tetrahydrofuran. In water and ethanol, strong swelling was observed while the transport mechanism deviated from Fickian-type behavior. By varying the counterion and the chain length of the cation, their influences on the processes were observed. The calculation of the diffusion coefficients delivered values in the range of 10-10 to 10-12 m2 s-1. The gravimetric results were supported by apparent diffusion coefficients measured through diffusion-weighted magnetic resonance imaging. A visualization of the water diffusion front within the hydrogel should help to further elucidate the diffusion processes in the imidazolium-based hydrogels.
| S-EPMC8199506 | biostudies-literature
Project description:We combine direct surface force measurements with thermodynamic arguments to demonstrate that pure ionic liquids are expected to behave as dilute weak electrolyte solutions, with typical effective dissociated ion concentrations of less than 0.1% at room temperature. We performed equilibrium force-distance measurements across the common ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim][NTf2]) using a surface forces apparatus with in situ electrochemical control and quantitatively modeled these measurements using the van der Waals and electrostatic double-layer forces of the Derjaguin-Landau-Verwey-Overbeek theory with an additive repulsive steric (entropic) ion-surface binding force. Our results indicate that ionic liquids screen charged surfaces through the formation of both bound (Stern) and diffuse electric double layers, where the diffuse double layer is comprised of effectively dissociated ionic liquid ions. Additionally, we used the energetics of thermally dissociating ions in a dielectric medium to quantitatively predict the equilibrium for the effective dissociation reaction of [C4mim][NTf2] ions, in excellent agreement with the measured Debye length. Our results clearly demonstrate that, outside of the bound double layer, most of the ions in [C4mim][NTf2] are not effectively dissociated and thus do not contribute to electrostatic screening. We also provide a general, molecular-scale framework for designing ionic liquids with significantly increased dissociated charge densities via judiciously balancing ion pair interactions with bulk dielectric properties. Our results clear up several inconsistencies that have hampered scientific progress in this important area and guide the rational design of unique, high-free-ion density ionic liquids and ionic liquid blends.
| S-EPMC3683794 | biostudies-literature
Project description:Today, the use of polymer electrolyte membranes (PEMs) possessing ionic liquids (ILs) in middle and high temperature polymer electrolyte membrane fuel cells (MT-PEMFCs and HT-PEMFCs) have been increased. ILs are the organic salts, and they are typically liquid at the temperature lower than 100 °C with high conductivity and thermal stability. The membranes containing ILs can conduct protons through the PEMs at elevated temperatures (more than 80 °C), unlike the Nafion-based membranes. A wide range of ILs have been identified, including chiral ILs, bio-ILs, basic ILs, energetic ILs, metallic ILs, and neutral ILs, that, from among them, functionalized ionic liquids (FILs) include a lot of ion exchange groups in their structure that improve and accelerate proton conduction through the polymeric membrane. In spite of positive features of using ILs, the leaching of ILs from the membranes during the operation of fuel cell is the main downside of these organic salts, which leads to reducing the performance of the membranes; however, there are some ways to diminish leaching from the membranes. The aim of this review is to provide an overview of these issues by evaluating key studies that have been undertaken in the last years in order to present objective and comprehensive updated information that presents the progress that has been made in this field. Significant information regarding the utilization of ILs in MT-PEMFCs and HT-PEMFCs, ILs structure, properties, and synthesis is given. Moreover, leaching of ILs as a challenging demerit and the possible methods to tackle this problem are approached in this paper. The present review will be of interest to chemists, electrochemists, environmentalists, and any other researchers working on sustainable energy production field.
| S-EPMC8196583 | biostudies-literature