Browse
Submit Data
Databases
API
Help

Dataset Information

5 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Polymer-Bitumen Interaction: A Correlation Study with Six Different Bitumens to Investigate the Influence of SARA Fractions on the Phase Stability, Swelling, and Thermo-Rheological Properties of SBS-PmB.

ABSTRACT: The aim of this work is to determine the influence of the bitumen chemistry on the rheological performance of bitumen and polymer modified bitumen (PmB), as well as the polymer distribution and storage stability. Six different bitumens and their 5 wt.% SBS mixtures are considered in this work. The bitumen composition was determined by SARA fractioning, which was then correlated with the glass transition temperature, complex modulus |G*|, and phase angle, which were obtained by parallel-plate dynamic shear rheology in the temperature range of -25 to 65 °C. The polymer distribution, which was derived from fluorescence microscopy images and the storage stability (determined by tube test) also correlated with the SARA fractions. It was found that the saturates decrease |G*| and Tg and increase the phase angle in crude bitumen, while the asphaltenes increase |G*| and the phase angle. For PmB, the amount of swelling was determined by the saturate content of bitumen. The glass transition temperature of PmBs increases for low saturate and decreases for high saturate contents. |G*| and the phase angle of PmBs correlates with the saturate content, with a varying influence depending on a high or low saturate content and the temperature range due to saturate depletion in the bitumen-rich phase and the varying vol% polymer-rich phase. The aromatic and resin fractions show no correlation in the considered bitumens and PmBs.

SUBMITTER: Wieser M

PROVIDER: S-EPMC7962451 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Spicy Bitumen: Curcumin Effects on the Rheological and Adhesion Properties of Asphalt.

Project description:Over the years, the need for the synthesis of biodegradable materials has facilitated the drift of the asphalt industry towards eco-sustainable and cost-effective production of road pavements. The principal additives in the asphalt industry to improve the performance of road pavements and increase its lifespan are majorly rheological modifiers, adhesion promoters and anti-oxidant agents. Rheological modifiers increase physico-chemical properties such as transition temperature of asphalt binder (bitumen), adhesion promoters increase the affinity between binder and stone aggregates while anti-oxidant agents reduce the effects of oxidation caused by exposure to air, water and other natural elements during the production of asphalt pavements. In this study, we tested the effectiveness of a food grade bio-additive on these three aforementioned properties. We also sought to hypothesize the mechanisms by which the additive confers these desired features on bitumen. We present this study to evaluate the effects of turmeric, a food-based additive, on bitumen. The study was conducted through dynamic shear rheology (DSR), atomic force microscopy, scanning electron microscopy (SEM) and boiling test analysis.

| S-EPMC8036851 | biostudies-literature

Equilibrium Swelling of Biocompatible Thermo-Responsive Copolymer Gels.

Project description:Biomedical applications of thermo-responsive (TR) hydrogels require these materials to be biocompatible, non-cytotoxic, and non-immunogenic. Due to serious concerns regarding potential toxicity of poly(N-isopropylacrylamide) (PNIPAm), design of alternative homo- and copolymer gels with controllable swelling properties has recently become a hot topic. This study focuses on equilibrium swelling of five potential candidates to replace PNIPAm in biomedical and biotechnological applications: poly(N-vinylcaprolactam), poly(vinyl methyl ether), poly(N,N-dimethyl amino ethyl methacrylate), and two families of poly(2-oxazoline)s, and poly(oligo(ethylene glycol) methacrylates). To evaluate their water uptake properties and to compare them with those of substituted acrylamide gels, a unified model is developed for equilibrium swelling of TR copolymer gels with various types of swelling diagrams. Depending on the strength of hydrophobic interactions (high, intermediate, and low), the (co)polymers under consideration are split into three groups that reveal different responses at and above the volume phase transition temperature.

| S-EPMC8167660 | biostudies-literature

Short- and Long-Term Epoxy Modification of Bitumen: Modification Kinetics, Rheological Properties, and Microstructure.

Project description:Aiming to gain knowledge in the epoxy-bitumen modification mechanisms, this work explores the effects that epoxy concentration and ambient curing exert on the physico-chemistry and thermo-rheological properties of epoxy-modified binders. Process rheokinetics of epoxy-bitumen blends indicates that binder short-term modification (i.e., during processing) is accelerated by epoxy concentration. Furthermore, a synergistic effect of epoxy concentration and ambient curing is found during long-term modification (i.e., during curing at ambient conditions). As a result, viscous and viscoelastic rheological properties of binders are enhanced at medium/high in-service temperatures, at least, after one month of curing. FTIR (Fourier Transform Infrared spectroscopy) tests and SARAs (Saturates, Aromatics, Resins and Asphaltenes) analysis confirm the existence of esterification/etherification reactions between epoxy oxirane groups and the carbonyl groups available in aromatic and resin molecules. Thus, the new high molecular weight compounds increase the asphaltenic fraction of modified bitumen. Likewise, nonreversing heat flow curves obtained by modulated calorimetry corroborate the formation of such highly structured domains responsible for the final binder performance.

| S-EPMC7182878 | biostudies-literature

Effect of ultrasound irradiation on asphaltene aggregation and implications to rheological behavior of bitumen.

Project description:The present work investigates the contribution of asphaltene aggregation to bitumen viscosity subject to ultrasound irradiation. A West-African bitumen with a viscosity of 12043cP at room temperature was sonicated at low (38 kHz) and mild frequency (200 kHz) under controlled gas environment including air, nitrogen (N2) and carbon dioxide (CO2). The rheology of the bitumen, asphaltene content analyses as well as spectral studies were conducted. Herein was found that sonicating the bitumen at 200 kHz under air-environment reduces the initial viscosity up to 2079cP, which was twice larger than that obtained when a low frequency was used. In respect of the gas environment, it was shown that ultrasound irradiation under N2 environment could lower the bitumen viscosity up to 3274cP. A positive correlation between the asphaltene content and the viscosity reduction was established. The results from the spectral analyses including Fast Fourier Infrared and the observations from Scanned Electron Microscope were consistent with the rheological studies and led to the argument that the viscosity reduction results from either the scission of long chain molecules attached to the aromatic rings (when the applied frequency was altered under fixed gas environment) or the self-aggregation of asphaltene monomers (when gas environment was changed at fixed frequency).

| S-EPMC8567299 | biostudies-literature

A study on the rheological properties and modification mechanism of graphene oxide/polyurethane/SBS-modified asphalt.

Project description:To study the effect of graphene oxide (GO) on thermoplastic polyurethane (TPU)/styrene-butadiene-styrene (SBS)-modified asphalt and reveal the modification mechanism, GO/TPU/SBS-modified asphalt was prepared by high-speed shearing Hongjuan et al. (2020). The physical properties of the modified asphalt were measured via a basic index test, and the dynamic rheological behavior of the modified asphalt was characterized by a dynamic shear rheometer (DSR), a bending beam rheometer (BBR), and other technical means. Moreover, double-beam UV-visible (UV-Vis) spectrophotometry and Fourier-transform infrared spectroscopy (FTIR) were conducted to determine the mechanism of asphalt modification from the microscopic perspective. The experimental results reveal that the GO content can improve the basic mechanical properties, high-temperature stability, and low-temperature cracking resistance of TPU/SBS-modified asphalt. When the GO content is 0.5%, the ductility and softening point of the modified asphalt are found to be significantly increased, and the degree of penetration is slightly decreased. Moreover, with the increase of the GO content, the rutting resistance and crack resistance of the asphalt materials are improved. Via the joint action of physical modification and chemical reaction, GO can form a stable structure with asphalt molecules, enhance the stability between asphalt molecules, and increase the colloidal content of macromolecules in the modified asphalt components.

| S-EPMC8901053 | biostudies-literature

Hybrid Polymerisation: An Exploratory Study of the Chemo-Mechanical and Rheological Properties of Hybrid-Modified Bitumen.

Project description:In this study, the mechanical and rheological properties of hybrid polymer-modified bitumen (PMB) have been investigated. For this purpose, nine different polymers-including crumb rubber, elastomers and plastomers at varying content-were studied to evaluate their mechanical performance as single polymers, first, and as a combination of two or more polymers as a hybrid polymer blend. Subsequently, the hybrid polymer blends were added in a relatively small percentage into the base bitumen to study its influence on the rheological performance of hybrid PMB. The mechanical properties identified from the analysis of the stress-strain curve of the single polymers were the Young's Modulus, tensile stress, and elongation at break. The chemical structure of the polymer hybrid blends was analysed using FTIR, followed by frequency sweep tests conducted using the dynamic shear rheometer (DSR) to determine the bitumen rheological properties. Results showed that hybrid PMB enhances the viscoelastic behaviour of bitumen at both low and high temperature compared to other PMBs only including single polymers.

| S-EPMC7240499 | biostudies-literature

The effect of saccharides on equilibrium swelling of thermo-responsive gels.

Project description:Mechanical and optical properties of thermo-responsive (TR) gels change drastically at their volume phase transition temperature. As the critical temperature is strongly affected by the presence of small amounts of additives in aqueous solutions, TR gels can be employed as sensors for detection and recognition of multiple analytes (from specific ions to hazardous biochemicals to pathogenic proteins) and actuators for biomedical applications. A simplified mean-field model is developed for equilibrium swelling of TR gels in aqueous solutions of additives. Its advantage is that the model involves a relatively small (compared with the conventional approaches) number of material constants and accounts for changes in the thermo-mechanical response at transition from the swollen to collapsed state. The ability of the model to describe experimental swelling diagrams and to predict the influence of additives on the equilibrium degree of swelling and the volume phase transition temperature of TR gels is confirmed by comparison of observations on poly(N-isopropylacrylamide) gel in aqueous solutions of saccharides (glucose, sucrose and galactose) with results of numerical analysis.

| S-EPMC9088206 | biostudies-literature

Physical, rheological and microscopic properties of AAT nanomaterial/crumb rubber powder composite-modified asphalt and SBS-modified asphalt.

Project description:This research was based on a nano-AAT (American Advanced Technology)-modified asphalt to which CRP (crumb rubber powder), a rubber waste, was introduced to explore the influence of CRP on AAT performance. The changes in the performance of AAT-modified asphalt after the addition of CRP were analyzed. The rubber powder with the raw material of waste tire was added to the asphalt instead of SBS modifier. While achieving waste recycling, the asphalt material has good performance. Physical analysis methods, rheological performance tests, rolling thin-film oven tests and Fourier transform infrared spectroscopy tests were used to investigate the performance of the composite-modified asphalt. The rheological properties of the composite-modified asphalt were analyzed by means of DSR, BBR and MSCR tests, and the microscopic mechanism of the modified asphalt was investigated by means of FTIR tests. The optimal nano-AAT-composite-modified formulation A3C3 (AAT-3.5%SBS-3%CRP) was selected by evaluating the overall performance. Additionally, the performances of the AAT/CRP-composite-modified asphalt and SBS-modified asphalt were compared using physical indicators, the rutting factor, creep flexibility and the stiffness modulus. The results show that the A3C3-modified asphalt had better stiffness, high-temperature (HT) performance and aging resistance than the SBS-modified asphalt, but it was less effective at low temperatures (LTs). According to FTIR, the absorption curves of A3C3 and SBS are essentially equal, with A3C3 only having a variation at 1104 cm-1.

| S-EPMC10783774 | biostudies-literature

Polymer photonic crystal membrane for thermo-regulating textile.

Project description:We study numerically the absorption and scattering properties of a polymer photonic membrane to thermoregulate the human body microclimate which corresponds to the area between the skin and a textile. We first show that the structuration of the absorbing photonic membrane with air holes leads to a modulation of the optical spectrum in the Mid-Infrared range. Indeed, we show that the membrane is able to modulate the transmission amplitude by 28% in benefit or deficit of both the absorption and reflection. We then studied the thermal balance between the human body and the surrounding environment through the photonic membrane. We found that, compared to a regular membrane, the photonic crystal structure behaves as a heating component that offers the possibility to reduce the temperature of the room up to +1 °C. The membrane is flexible, low cost, 3D-printable, free of metallic particles, and can easily be added to usual textiles.

| S-EPMC7300027 | biostudies-literature

Vapor Swelling of Polymer Brushes Compared to Nongrafted Films.

Project description:Polymer brushes, coatings of polymers covalently end-grafted to a surface, have been proposed as a more stable alternative to traditional physisorbed coatings. However, when such coatings are applied in settings such as vapor sensing and gas separation technologies, their responsiveness to solvent vapors becomes an important consideration. It can be anticipated that the end-anchoring in polymer brushes reduces the translational entropy of the polymers and instead introduces an entropic penalty against stretching when vapor is absorbed. Therefore, swelling can be expected to be diminished in brushes compared to nongrafted films. Here, we study the effect of the anchoring-constraint on vapor sorption in polymer coatings using coarse-grained molecular dynamics simulations as well as humidity-controlled ellipsometry on chemically identical polymer brushes and nongrafted films. We find a qualitative agreement between simulations and experiments, with both indicating that brushes certainly swell less than physisorbed films, although this effect is minor for common grafting densities. Our results imply that polymer brushes indeed hold great potential for the intended applications.

| S-EPMC9671043 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data