α-Amylase action on starch in chickpea flour following hydrothermal processing and different drying, cooling and storage conditions.
Ontology highlight
ABSTRACT:
SUBMITTER: Edwards CH
PROVIDER: S-EPMC7965859 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The quality standards for the export of chestnuts generate large quantities of rejected fruits, which require novel processing technologies for their safe industrial utilization. This study aimed to investigate the impact of high-pressure processing (HPP) and hydrothermal treatments (HT) on the physicochemical properties of rejected chestnut starch. Chestnuts were treated by HPP at 400, 500, and 600 MPa for 5 min and HT at 50 °C for 45 min. In general, all HPP treatments did not induce starch gelatinization, and their granules preserved the integrity and Maltese-cross. Moreover, starch granules' size and resistant starch content increased with the intensity of pressure. Native and HT chestnut starches were the most susceptible to digestion. HPP treatments did not affect the C-type crystalline pattern of native starch, but the crystalline region was gradually modified to become amorphous. HPP-600 MPa treated starch showed modified pasting properties and exhibited the highest values of peak viscosity. This study demonstrates for the first time that after HPP-600 MPa treatment, a novel chestnut starch gel structure is obtained. Moreover, HPP treatments could increase the slow-digesting starch, which benefits the development of healthier products. HPP can be considered an interesting technology to obtain added-value starch from rejected chestnut fruits.
| S-EPMC9865283 | biostudies-literature
Project description:The present study was performed to develop Near-infrared spectroscopy based prediction method for the quantification of the maize flour adulteration in chickpea flour. Adulterated samples of Chickpea flour (besan) were prepared by spiking different concentrations of maize flour with pure Chickpea flour in the range of 1-90% (w/w). The spectra of pure Chickpea flour, pure maize flour, and adulterated samples of Chickpea flour with maize flour were acquired as the logarithm of reciprocal of reflectance (log 1/R) in the entire Visible-NIR wavelength range of 400-2498 nm. The acquired spectra were pre-processed by Ist derivative, standard normal variate, and detrending. The calibration models were developed using modified partial least square regression (MPLSR), partial least square regression and principal component regression. The optimal model was selected on the basis of highest values of the coefficient of determination (RSQ), one minus variance ratio (1-VR) and lowest values of standard errors of calibration (SEC), and standard error of cross-validation (SECV). MPLSR model having RSQ and 1-VR value of 0.999 and 0.996 having SEC and SECV value of 1.092 and 2.042 was developed for quantification of maize flour adulteration in chickpea flour. Cross validation and external validation of the developed models resulted in RSQ of 0.999, 0.997 and standard error of prediction of 1.117, and 2.075, respectively.Supplementary informationThe online version contains supplementary material available at 10.1007/s13197-022-05456-7.
| S-EPMC9051818 | biostudies-literature
Project description:In this data article, laboratory experimental investigation results on drying kinetic properties: the drying temperature (T), drying air velocity (V) and dewatering time (Te), each of the factors has five levels, and the experiment was replicated three times and the output: drying rate and drying time obtained, were observed. The experiment was conducted at National Centre for Agricultural Mechanization (NCAM) for a period of eight months, in 2014. Analysis of variance was carried out using randomized complete block design with factorial experiment on each of the outputs: drying rate and drying times of the industrial cassava flour. A clear picture on each of these outputs was provided separately using tables and figures. It was observed that all the main factors as well as two and three ways interactions are significant at 5% level for both drying time and rate. This also implies that the rate of drying grated unfermented cassava mash, to produce industrial cassava flour, depend on the dewatering time (the initial moisture content), temperature of drying, velocity of drying air as well as the combinations of these factors altogether. It was also discovered that all the levels of each of these factors are significantly difference from one another. In summary, the time of drying is a function of the dewatering time which was responsible for the initial moisture content. The higher the initial moisture content the longer the time of drying, and the lower the initial moisture content, the lower the time of drying. Also, the higher the temperature of drying the shorter the time of drying and vice versa. Also, the air velocity effect on the drying process was significant. As velocity increases, rate of drying also increases and vice versa. Finally, it can be deduced that the drying kinetics are influenced by these processing factors.
| S-EPMC5650651 | biostudies-literature
Project description:Efficient inactivation of microbial α-amylases (EC 3.2.1.1) can be a challenge in starch systems as the presence of starch has been shown to enhance the stability of the enzymes. In this study, commonly used inactivation methods, including multistep washing and pH adjustment, were assessed for their efficiency in inactivating different α-amylases in presence of raw potato starch. Furthermore, an effective approach for irreversible α-amylase inactivation using sodium hypochlorite (NaOCl) is demonstrated. Regarding inactivation by extreme pH, the activity of five different α-amylases was either eliminated or significantly reduced at pH 1.5 and 12. However, treatment at extreme pH for 5 min, followed by incubation at pH 6.5, resulted in hydrolysis yields of 42-816% relative to controls that had not been subjected to extreme pH. "Inactivation" by multistep washing with water, ethanol, and acetone followed by gelatinization as preparation for analysis gave significant starch hydrolysis compared to samples inactivated with NaOCl before the wash. This indicates that the further starch degradation observed in samples subjected to washing only took place during the subsequent gelatinization. The current study demonstrates the importance of inactivation methodology in α-amylase-mediated raw starch depolymerization and provides a method for efficient α-amylase inactivation in starch systems.
| S-EPMC10095898 | biostudies-literature
Project description:The oxidative stability of pretreated full-fat soybean flour (FFSF) was evaluated under commercial (Experiment I) and accelerated conditions (Experiment II). In Experiment I, soybeans were pretreated using germination, soaking (24 h), or roasting (110-120 °C), and the dried, milled FFSF was stored for 120 days under commercial storage conditions in two cities in Ghana. Acid value (AV) and peroxide value (PV) were determined. The proximate and sensory quality of Tuo Zaafi, a maize-only dish in northern Ghana enriched with 10-30% of the pretreated FFSF, was assessed. Before storage, all samples had similar PV (1.907-4.305 mEq/kg oil); however, the AV of the germinated sample was higher than that of the unprocessed samples (10.83 vs. 3.13 mgKOH/g oil; p < 0.001). After storage, although AV fluctuated, the PV was similar (2.39-3.74 mEq/kg oil; p = 1.00). Storage location showed no significant differences in terms of AV (4.96-4.97 mgKOH/g oil; p = 0.994), unlike PV (2.07-3.55 mEq/kg oil; p < 0.001). Increasing the levels of the pretreated FFSF in Tuo Zaafi resulted in lower consumer preference scores for all sensory attributes. In Experiment II, FFSF samples (dehulled and nondehulled) prepared from germination, soaking (18 h and 24 h) and roasting were evaluated under accelerated conditions (AC) of controlled temperature (45 ± 0.1 °C) and relative humidity (81 ± 1%) for AV, PV, p-anisidine value (pAV), lipoxygenase activity (LOX), color, and moisture. Pretreatment, condition, time, and their interaction affected the oxidative stability of all FFSF samples (p < 0.001). Roasted samples showed the highest increase in AV and pAV in both storage conditions (p < 0.05). Under room temperature conditions (RTC), the roasted and germinated samples had lower LOX activity (p < 0.05) at the end of storage time compared to that of the controls. In conclusion, germination and soaking reduced oxidation of FFSF, while roasting promotes it, despite its common use.
| S-EPMC8472710 | biostudies-literature
Project description:Legumes are a vital candidate in the fight for food security as a sustainable and nutritious food source. The current study systematically investigated the effects of hydrothermal processing of varying durations (15-120 min) on the texture, starch and protein digestibility of cowpeas (Vigna unguiculata), chickpeas (Cicer arietinum) and kidney beans (Phaseolus vulgaris). Texture analysis and in vitro oral-gastro-intestinal digestion of each legume was combined with kinetic modelling to explore the rate and extent of their changes observed during hydrothermal processing. All three legumes showed rapid initial texture decay in the first 30 min of processing. Chickpeas showed the fastest rate of texture degradation with processing duration, whereas texture degradation of kidney bean was slower but reached the lowest hardness value among all beans when processed up to 120 min. The rate of starch and protein digestion increased with prolonged processing duration, whilst showing an inverse relationship with texture values. The extent of starch digestion continually increased with processing duration for all three legumes, whereas the extent of protein digestion decreased after 60 min in cowpeas. This study systematically demonstrated how choosing different processing times can modulate the rate of texture degradation, starch and protein digestion in legumes. The findings of this study can aid consumers and manufacturers on optimal processing to achieve the desired texture or modulate starch and protein digestibility.
| S-EPMC8234845 | biostudies-literature
Project description:Streptococcus gordonii is a common oral commensal bacterial species in tooth biofilm (dental plaque) and specifically binds to salivary amylase through the surface exposed amylase-binding protein A (AbpA). When S. gordonii cells are pretreated with amylase, amylase bound to AbpA facilitates growth with starch as a primary nutrition source. The goal of this study was to explore possible regulatory effects of starch, starch metabolites and amylase on the expression of S. gordonii AbpA. An amylase ligand-binding assay was used to assess the expression of AbpA in culture supernatants and on bacterial cells from S. gordonii grown in defined medium supplemented with 1% starch, 0.5 mg ml(-1) amylase, with starch and amylase together, or with various linear malto-oligosaccharides. Transcription of abpA was determined by reverse transcription quantitative polymerase chain reaction. AbpA was not detectable in culture supernatants containing either starch alone or amylase alone. In contrast, the amount of AbpA was notably increased when starch and amylase were both present in the medium. The expression of abpA was significantly increased (P < 0.05) following 40 min of incubation in defined medium supplemented with starch and amylase. Similar results were obtained in the presence of maltose and other short-chain malto-oligosacchrides. These results suggest that the products of starch hydrolysis produced from the action of salivary α-amylase, particularly maltose and maltotriose, up-regulate AbpA expression in S. gordonii.
| S-EPMC3390759 | biostudies-literature
Project description:In order to identify antifungal compounds from natural sources to be used as ingredients in the bakery industry, water/salt-soluble extracts (WSE) from different legume flour hydrolysates obtained by the use of a fungal protease were assayed against Penicillium roqueforti DPPMAF1. The agar diffusion assays allowed the selection of the pea (Pisum sativum) hydrolysate as the most active. As shown by the hyphal radial growth rate, the WSE had inhibitory activity towards several fungi isolated from bakeries. The MIC of the WSE was 9.0 mg/ml. Fungal inhibition was slightly affected by heating and variations in pH. The antifungal activity was attributed to three native proteins (pea defensins 1 and 2 and a nonspecific lipid transfer protein [nsLTP]) and a mixture of peptides released during hydrolysis. The three proteins have been reported previously as components of the defense system of the plant. Five peptides were purified from WSE and were identified as sequences encrypted in leginsulin A, vicilin, provicilin, and the nsLTP. To confirm antifungal activity, the peptides were chemically synthesized and tested. Freeze-dried WSE were used as ingredients in leavened baked goods. In particular, breads made by the addition of 1.6% (wt/wt) of the extract and fermented by baker's yeast or sourdough were characterized for their main chemical, structural, and sensory features, packed in polyethylene bags, stored at room temperature, and compared to controls prepared without pea hydrolysate. Artificially inoculated slices of a bread containing the WSE did not show contamination by fungi until at least 21 days of storage and behaved like the bread prepared with calcium propionate (0.3%, wt/wt).
| S-EPMC4524146 | biostudies-literature
Project description:Whole foods are generally considered healthier choices compared to processed foods. For nutritional consideration, whole wheat bread is recommended over the white bread. However, it has a similarly high effect on glycemic response (GR) as the white bread. This study is aimed at assessing the microstructure of whole wheat flour (WWF), white flour (WF), chickpea flour (BF), their blends, and dough and the GR of the bread made thereof. Scanning electron microscope analysis showed clear distinctions in the microstructure of the three flours. WWF particle size distribution had the widest spread with a polydispersity index (PDI) of 1.0 (±0.0) and wider average diameter, with z value of 1679.5 (±156.3) compared with the particle size of 658.9 (±160.4) and PDI of 0.740 (±0.04) for WF followed by BF with the particle size of 394.1 (±54.9) and PDI of 0.388 (±0.07) (p < 0.05). The falling number was significantly (p < 0.05) lower for WWF compared to WF or BF, indicating higher alpha-amylase activity. Thus, bread made from WWF without BF substitution exhibited a higher glycemic response similar to the bread made from WF. When partly replaced with BF, the GR of the bread made with WWF or WF reduced significantly (p < 0.05) in healthy individuals.
| S-EPMC7557900 | biostudies-literature
Project description:Pizza being the most popular food worldwide, quality and sensory appeal are important considerations during its modification effort. This study was aimed to evaluate the quality of pizza made using two different sources of proteins, chickpea (Cicer arietinum) flour and dried carp fish powder (Cyprinus carpio). Analysis indicated nutrients richness specificity of chickpea flour (higher fiber, energy, iron, zinc, linoleic acid and total nonessential amino acids) and dried carp fish powder (higher contents of protein, fats, ash, oleic acid and total essential amino acids) complementing wheat flour to enhance nutritional value of pizza. Total plate count and thiobarbituric acid were increased (P<0.05) in dried carp fish powder after 45 days of storage, but no Coliform were detected. Wheat flour was substituted with 5, 7.5 and 10% chickpea flour or dried carp fish powder and chemical, textural, sensory and storage evaluation parameters of in pizza were investigated. Dried carp fish powder increased (P<0.05) contents of protein, ash, fats, zinc and protein digestibility of pizza. Chickpea flour increased iron and zinc contents of the pizza. Water activity (aw) was decreased in fish powder and chickpea pizza. Pizza firmness and gumminess were significantly (p<0.05) increased at every level of protein source, but cohesiveness was decreased with 10% chickpea flour. Pizza chewiness was the same (P>0.05) across the levels of two protein sources. Springiness was decreased (P<0.05) with high level (10%) dried fish powder and low/intermediate level of chickpea flour. Chickpea and dried carp fish incorporation up to 7.50% in pizza at the expense of wheat flour had no effect (P>0.05) on all sensorial parameters except for odor values. The results could be useful in utilization of chickpea flour and carp fish powder in designing nutritious pizza for consumers.
| S-EPMC5584754 | biostudies-literature