Novel indel mutation in the N gene of SARS-CoV-2 clinical samples that were diagnosed positive in a commercial RT-PCR assay.
Ontology highlight
ABSTRACT:
SUBMITTER: Lee S
PROVIDER: S-EPMC7977010 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:BackgroundIndia bears the second largest burden of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) infection. A multitude of reverse transcription polymerase chain reaction (RT-PCR) detection assays with disparate gene targets, including automated high-throughput platforms, are available. Varying concordance and interpretation of diagnostic results in this setting can result in significant reporting delays, leading to suboptimal disease management. This article reports the development of a novel ORF1a-based SARS-CoV-2 RT-PCR assay - Viroselect - that shows high concordance with conventional assays and the ability to resolve inconclusive results generated during the peak of the epidemic in Mumbai, India.MethodsA unique target region within SARS-CoV-2 ORF1a - the non-structural protein 3 (nsp3) region - was used to design and develop the assay. This hypervariable region (1923-3956) between SARS-CoV-2, SARS-CoV-1 and Middle East respiratory syndrome coronavirus was utilized to design the primers and probes for the RT-PCR assay. The concordance of this assay with commonly used emergency use authorization (US Food and Drug Administration) manual kits and an automated high-throughput testing platform was evaluated. Further, a retrospective analysis was carried out using Viroselect on samples reported as 'inconclusive' between April and October 2020.ResultsIn total, 701 samples were tested. Concordance analysis of 477 samples demonstrated high overall agreement of Viroselect with both manual (87.6%) and automated (84.7%) assays. Also, in the retrospective analysis of 224 additional samples reported as 'inconclusive', Viroselect was able to resolve 100% (19/19) and 93.7% (192/205) of samples which had inconclusive results on manual and automated high-throughput platforms, respectively.ConclusionViroselect had high concordance with conventional assays, both manual and automated, and has potential to resolve inconclusive samples.
| S-EPMC8036167 | biostudies-literature
Project description:The ongoing COVID-19 pandemic has generated a global health crisis that needs well management of not only patients but also environments to reduce SARS-CoV-2 transmission. The gold standard RT-qPCR method is sensitive and rapid to detect SARS-CoV-2 nucleic acid, but does not answer if PCR-positive samples contain infectious virions. To circumvent this problem, we report an SDS-propidium monoazide (PMA) assisted RT-qPCR method that enables rapid discrimination of live and dead SARS-CoV-2 within 3 h. PMA, a photo-reactive dye, can react with viral RNA released or inside inactivated SARS-CoV-2 virions under assistance of 0.005% SDS, but not viral RNA inside live virions. Formation of PMA-RNA conjugates prevents PCR amplification, leaving only infectious virions to be detected. Under optimum conditions, RT-qPCR detection of heat-inactivated SARS-CoV-2 resulted in larger than 9 Ct value differences between PMA-treated and PMA-free groups, while less than 0.5 Ct differences were observed in the detection of infectious SARS-CoV-2 ranging from 20 to 5148 viral particles. Using a cutoff Ct difference of 8.6, this method could differentiate as low as 8 PFU live viruses in the mixtures of live and heat-inactivated virions. Further experiments showed that this method could successfully monitor the natural inactivation process of SARS-CoV-2 on plastic surfaces during storage with comparable results to the gold standard plaque assay. We believe that the culture-free method established here could be used for rapid and convenient determination of infectious SARS-CoV-2 virions in PCR-positive samples, which will facilitate better control of SARS-CoV-2 transmission.
| S-EPMC8285242 | biostudies-literature
Project description:Fast, accurate, and reliable diagnostic tests are critical for controlling the spread of the coronavirus disease 2019 (COVID-19) associated with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection. The current gold standard for testing is real-time PCR; however, during the current pandemic, supplies of testing kits and reagents have been limited. We report the validation of a rapid (30 minutes), user-friendly, and accurate microchip real-time PCR assay for detection of SARS-CoV-2 from nasopharyngeal swab RNA extracts. Microchips preloaded with COVID-19 primers and probes for the N gene accommodate 1.2-μL reaction volumes, lowering the required reagents by 10-fold compared with tube-based real-time PCR. We validated our assay using contrived reference samples and 21 clinical samples from patients in Canada, determining a limit of detection of 1 copy per reaction. The microchip real-time PCR provides a significantly lower resource alternative to the Centers for Disease Control and Prevention-approved real-time RT-PCR assays with comparable sensitivity, showing 100% positive and negative predictive agreement of clinical samples.
| S-EPMC7939975 | biostudies-literature
Project description:BackgroundSince its beginning, the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has been a challenge for clinical and molecular diagnostics, because it has been caused by a novel viral agent. Whole-genome sequencing assisted in the characterization and classification of SARS-CoV-2, and it is an essential tool to genomic surveillance aiming to identify potentials hot spots that could impact on vaccine immune response and on virus diagnosis. We describe two cases of failure at the N2 target of the RT-PCR test Xpert® Xpress SARS-CoV-2.MethodsTotal nucleic acid from the Nasopharyngeal (NP) and oropharyngeal (OP) swab samples and cell supernatant isolates were obtained. RNA samples were submitted to random amplification. Raw sequencing data were subjected to sequence quality controls, removal of human contaminants by aligning against the HG19 reference genome, taxonomic identification of other pathogens and genome recovery through assembly and manual curation. RT-PCR test Xpert® Xpress SARS-CoV-2 was used for molecular diagnosis of SARS-CoV-2 infection, samples were tested in duplicates.ResultsWe identified 27 samples positive for SARS-CoV-2 with a nucleocapsid (N) gene drop out on Cepheid Xpert® Xpress SARS-CoV-2 assay. Sequencing of 2 of 27 samples revealed a single common mutation in the N gene C29197T, potentially involved in the failed detection of N target.ConclusionsThis study highlights the importance of genomic data to update molecular tests and vaccines.
| S-EPMC10591358 | biostudies-literature
Project description:BackgroundKnowing how long SARS-CoV-2-positive individuals can remain infective is crucial for the design of infection prevention and control strategies. Viral culture is the gold standard for detecting an active-replicative virus and evaluating its infectious potential.ObjectiveTo assess the correlation of SARS-CoV-2 infectivity with the number of days from symptom onset and the Ct value, using culture as a reference method. Also, to describe a detailed protocol for SARS-CoV-2 culture and immunofluorescence confirmation based on our experience with other respiratory viruses.Study design100 consecutive respiratory samples positive for SARS-CoV-2 by RT-PCR from different subjects were inoculated into VERO E6 cells.ResultsViral isolation was successful in 58% of samples. The median number of days from symptom onset for culture-positive samples was 2, and 15 for culture-negative samples. Six positive cultures were obtained in patients ≥14 days after symptom onset, all of whom were immunocompromised or with severe COVID-19. The mean Ct value was 12.64 units higher in culture-negative than in culture-positive samples. The probability of successfully isolating SARS-CoV-2 in samples with a Ct value <22 was 100%, decreasing to 3.1% when >27.ConclusionsOur findings show a significant positive correlation between the probability of isolating SARS-CoV-2 in culture, fewer days of symptoms and a lower RT-PCR Ct value. SARS-CoV-2 infectivity lasts no more than 14 days from symptom onset in immunocompetent individuals. In contrast, in immunocompromised patients or those with severe COVID-19 infectivity may remain after 14 days. Ct value <22 always indicates infectivity.
| S-EPMC9046102 | biostudies-literature
Project description:BackgroundReverse transcription-polymerase chain reaction (RT-PCR) is an extremely common clinical method for detecting pathogens, particularly for emerging infectious diseases such as the new coronavirus disease (COVID-19). Currently, detection of the RNA from the novel coronavirus SARS-CoV-2 is the gold standard for establishing a COVID-19 diagnosis. This study evaluates the characteristic performance of the analytical system in a clinical laboratory.MethodsA commercial SARS-CoV-2 RNA RT-PCR Kit used in a clinical laboratory is assessed based on ISO 15189 verification requirements. A multiple real-time RT-PCR assay for the RdRP, N, and E genes in SARS-CoV-2 is verified.ResultsThe analytical system exhibits good analytical sensitivity (1000 copies/mL) and specificity (100%); however, the values of 86.7% and 100% for analytical accuracy deserved attention, compared with two other types of methods. Overall, the kit is potentially useful for SARS-CoV-2 diagnostic testing and meets the verification requirements.ConclusionCompliance with international standards, such as ISO 15189, is valuable for clinical laboratories and for improving laboratory medicine quality and safety. Normalization is essential for obtaining reliable results from the SARS-CoV-2 RNA RT-PCR assay. This study aims to develop an improved SARS-CoV-2 verification framework compared with traditional molecular diagnostic methods, given the urgency of implementing new assays in clinical laboratories.
| S-EPMC7435359 | biostudies-literature
Project description:The COVID-19 pandemic requires sensitive detection of the SARS-CoV-2 virus from samples to ensure accurate detection of infected patients, an essential component of effective national track and trace programs. Due to the scaling challenges of large sample numbers, sample pooling is an attractive solution to reduce both extraction and amplification reagent costs, if high sensitivity can be maintained. We demonstrate that the Erba Molecular ErbaMDx SARS-CoV-2 RT-PCR Kit (EM kit) delivers high sensitivity, achieving analytical detection of 5 copies/reaction SARS-CoV-2 genomic RNA, and 200 copies/mL SARS-CoV-2 inactivated virus spiked into nasopharyngeal swab (NP) samples and extracted through workflow. Furthermore, the EM Kit demonstrates high sensitivity in both pooled (1 in 5) and non-pooled NP samples when compared to an FDA Emergency Use Authorization approved assay, following published FDA guidelines. These findings demonstrate that the EM Kit is suitable for sample pooling, with minimal impact on assay performance. As the COVID-19 pandemic progresses, high sensitivity assays such as the EM Kit will have an important role in ensuring high throughput and sensitive testing using pooled samples can be maintained, delivering the most cost-effective sample extraction and amplification option for national test and trace programs.
| S-EPMC8965539 | biostudies-literature
Project description:Quantitative reverse transcription polymerase chain reaction (RT-qPCR) assay is the gold standard recommended to test for acute SARS-CoV-2 infection. However, it generally requires expensive equipment such as RNA isolation instruments and real-time PCR thermal cyclers. As a pandemic, COVID-19 has spread indiscriminately, and many low resource settings and developing countries do not have the means for fast and accurate COVID-19 detection to control the outbreak. Additionally, long assay times, in part caused by slow sample preparation steps, have created a large backlog when testing patient samples suspected of COVID-19. With many PCR-based molecular assays including an extraction step, this can take a significant amount of time and labor, especially if the extraction is performed manually. Using COVID-19 clinical specimens, we have collected evidence that the RT-qPCR assay can feasibly be performed directly on patient sample material in virus transport medium (VTM) without an RNA extraction step, while still producing sensitive test results. If RNA extraction steps can be omitted without significantly affecting clinical sensitivity, the turn-around time of COVID-19 tests, and the backlog we currently experience can be reduced drastically. Furthermore, our data suggest that rapid RT-PCR can be implemented for sensitive and specific molecular diagnosis of COVID-19 in locations where sophisticated laboratory instruments are not available. Our USD 300 set up achieved rapid RT-PCR using thin-walled PCR tubes and a water bath setup using sous vide immersion heaters, a Raspberry Pi computer, and a single servo motor that can process up to 96 samples at a time. Using COVID-19 positive clinical specimens, we demonstrated that RT-PCR assays can be performed in as little as 12 min using untreated samples, heat-inactivated samples, or extracted RNA templates with our low-cost water bath setup. These findings can help rapid COVID-19 testing to become more accessible and attainable across the globe.
| S-EPMC7598596 | biostudies-literature
Project description:Norovirus is a highly prevalent pathogen that can infect a wide range of host species. Thus far, there have only been two reports of norovirus infection in rats. Diagnostic assays for the detection of norovirus are well established, but a specific molecular assay for the diagnosis of norovirus infection in laboratory rats has not yet been reported. In this study, we describe the development of a sensitive, semi-nested RT-PCR assay for detection of norovirus in fecal samples from Rattus norvegicus, reared in animal facilities under different sanitary barrier conditions. Additionally, we describe the first report of the presence of norovirus in rat colonies from Brazilian animal facilities.
| S-EPMC6511519 | biostudies-literature
Project description:COVID-19 is an infectious disease that caused a global pandemic affecting people worldwide. As disease detection and vaccine rollout continue to progress, there is still a need for efficient diagnostic tools to satisfy continued testing needs. This preliminary study evaluated a novel SARS-CoV-2 diagnostic test called DirectDetect SARS-CoV-2 Direct Real-time reverse transcriptase polymerase chain reaction (RT-PCR) based on a limited sample size of 24 respiratory samples from 14 SARS-CoV-2-positive patients. The test is advantageous compared to others on the market since it does not require viral transport medium or viral RNA extraction prior to nucleic acid amplification and detection. This capability transforms the hours-long sample preparation time into a minutes-long procedure while also eliminating the need for many costly reagents which may be difficult to obtain during the surge in nucleic acid-based testing during the pandemic. The results show a positive agreement of 94.7, 100, and 94.7% between dry sample swabs, treated samples, and untreated samples tested using the DirectDetect SARS-CoV-2 Direct Real-time RT-PCR compared to tests used in a clinical laboratory, respectively. The findings indicate that DirectDetect can be used for multiple different sample types while reducing the number of reagents and time needed for diagnosis. Although this study shows promising results using the DirectDetect results, further validation of this test using a larger sample set is required to assess the true performance of this test.
| S-EPMC8845437 | biostudies-literature