Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Nanocellulose/PEGDA Aerogels with Tunable Poisson's Ratio Fabricated by Stereolithography for Mouse Bone Marrow Mesenchymal Stem Cell Culture.

ABSTRACT: In this study, nanocellulose aerogels with a tunable Poisson's ratio were fabricated. Tissue engineering scaffolds with a tunable Poisson's ratio may be better able to simulate the mechanical behavior of natural tissues. A mixture of cellulose nanofibers (CNFs) and polyethylene glycol diacrylate (PEGDA) was used as the raw material to prepare CNF/PEGDA aerogels with a multiscale pore structure through a combination of stereolithography (SLA) and freeze-drying. The aerogels were fabricated with a regular macropore network structure and a random and homogeneous distribution of micropores. The macropore structure of the scaffolds could be customized through SLA, which resulted in scaffolds that exhibited one of three different mechanical behaviors: positive Poisson's ratio (PPR), negative Poisson's ratio (NPR) or zero Poisson's ratio (ZPR). Then, the hydrogel scaffolds were transformed into aerogel scaffolds through the freeze-drying method, which endowed the scaffolds with homogeneously distributed micropores. The material ratio and exposure were adjusted to obtain scaffolds with a clear pore structure. Then, the CNF/PEGDA scaffolds with different Poisson's ratios were subjected to mechanical tests, and their chondrogenic induction characteristics were determined. The NPR scaffold not only provided a good environment for cell growth but also affected mouse bone marrow mesenchymal stem cell (mBMSC) proliferation and chondrogenic induction. Thus, we provide a feasible scheme for the preparation of three-dimensional scaffolds with a multiscale pore structure and tunable Poisson's ratio, which contributes to cartilage repair in tissue engineering.

SUBMITTER: Tang A

PROVIDER: S-EPMC7997334 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Study on a Chiral Structure with Tunable Poisson's Ratio.

Project description:A chiral structure with a negative Poisson's ratio containing a hollow circle with varying diameters was designed, and the finite element method was used to investigate the variation in the Poisson's ratio when the hollow circle diameter was varied (d = 0, 1, 2, 3, and 4 mm). The simulation results showed that the Poisson's ratio was sensitive to the hollow circle diameter, and the minimum Poisson's ratio was -0.43. Three specimens with different hollow circle diameters (d' = 0, 1, and 3 mm) were 3D-printed from thermoplastic polyurethane, and the Poisson's ratio and equivalent elastic modulus were measured. In the elastic range, the Poisson's ratio increased and the equivalent elastic modulus decreased as the hollow circle diameter increased. The simulation and experimental results showed good agreement. The proposed structure is expected to be applicable to protective sports gear owing to its high energy absorption and the fact that its properties can be modified as required by adjusting the geometric parameters of the unit cell.

| S-EPMC8234039 | biostudies-literature

Tunable Negative Poisson's Ratio in Van der Waals Superlattice.

Project description:Negative Poisson's ratio (NPR) materials are functional and mechanical metamaterials that shrink (expand) longitudinally after being compressed (stretched) laterally. By using first-principles calculations, we found that Poisson's ratio can be tuned from near zero to negative by different stacking modes in van der Waals (vdW) graphene/hexagonal boron nitride (G/h-BN) superlattice. We attribute the NPR effect to the interaction of p z orbitals between the interfacial layers. Furthermore, a parameter calculated by analyzing the electronic band structure, namely, distance-dependent hopping integral, is used to describe the intensity of this interaction. We believe that this mechanism is not only applicable to G/h-BN superlattice but can also explain and predict the NPR effect in other vdW layered superlattices. Therefore, the NPR phenomenon, which was relatively rare in 3D and 2D materials, can be realized in the vdW superlattices by different stacking orders. The combinations of tunable NPRs with the excellent electrical/optical properties of 2D vdW superlattices will pave a novel avenue to a wide range of multifunctional applications.

| S-EPMC8054987 | biostudies-literature

Nanocellulose-MXene Biomimetic Aerogels with Orientation-Tunable Electromagnetic Interference Shielding Performance.

Project description:Designing lightweight nanostructured aerogels for high-performance electromagnetic interference (EMI) shielding is crucial yet challenging. Ultrathin cellulose nanofibrils (CNFs) are employed for assisting in building ultralow-density, robust, and highly flexible transition metal carbides and nitrides (MXenes) aerogels with oriented biomimetic cell walls. A significant influence of the angles between oriented cell walls and the incident EM wave electric field direction on the EMI shielding performance is revealed, providing an intriguing microstructure design strategy. MXene "bricks" bonded by CNF "mortars" of the nacre-like cell walls induce high mechanical strength, electrical conductivity, and interfacial polarization, yielding the resultant MXene/CNF aerogels an ultrahigh EMI shielding performance. The EMI shielding effectiveness (SE) of the aerogels reaches 74.6 or 35.5 dB at a density of merely 8.0 or 1.5 mg cm-3, respectively. The normalized surface specific SE is up to 189 400 dB cm2 g-1, significantly exceeding that of other EMI shielding materials reported so far.

| S-EPMC7404164 | biostudies-literature

Three-Dimensional Polymer Constructs Exhibiting a Tunable Negative Poisson's Ratio.

Project description:Young's modulus and Poisson's ratio of a porous polymeric construct (scaffold) quantitatively describe how it supports and transmits external stresses to its surroundings. While Young's modulus is always non-negative and highly tunable in magnitude, Poisson's ratio can, indeed, take on negative values despite the fact that it is non-negative for virtually every naturally occurring and artificial material. In some applications, a construct having a tunable negative Poisson's ratio (an auxetic construct) may be more suitable for supporting the external forces imposed upon it by its environment. Here, three-dimensional polyethylene glycol scaffolds with tunable negative Poisson's ratios are fabricated. Digital micromirror device projection printing (DMD-PP) is used to print single-layer constructs composed of cellular structures (pores) with special geometries, arrangements, and deformation mechanisms. The presence of the unit-cellular structures tunes the magnitude and polarity (positive or negative) of Poisson's ratio. Multilayer constructs are fabricated with DMD-PP by stacking the single-layer constructs with alternating layers of vertical connecting posts. The Poisson's ratios of the single- and multilayer constructs are determined from strain experiments, which show (1) that the Poisson's ratios of the constructs are accurately predicted by analytical deformation models and (2) that no slipping occurrs between layers in the multilayer constructs and the addition of new layers does not affect Poisson's ratio.

| S-EPMC3155506 | biostudies-literature

Super-elasticity at 4 K of covalently crosslinked polyimide aerogels with negative Poisson's ratio.

Project description:The deep cryogenic temperatures encountered in aerospace present significant challenges for the performance of elastic materials in spacecraft and related apparatus. Reported elastic carbon or ceramic aerogels overcome the low-temperature brittleness in conventional elastic polymers. However, complicated fabrication process and high costs greatly limited their applications. In this work, super-elasticity at a deep cryogenic temperature of covalently crosslinked polyimide (PI) aerogels is achieved based on scalable and low-cost directional dimethyl sulfoxide crystals assisted freeze gelation and freeze-drying strategy. The covalently crosslinked chemical structure, cellular architecture, negative Poisson's ratio (-0.2), low volume shrinkage (3.1%), and ultralow density (6.1 mg/cm3) endow the PI aerogels with an elastic compressive strain up to 99% even in liquid helium (4 K), almost zero loss of resilience after dramatic thermal shocks (∆T = 569 K), and fatigue resistance over 5000 times compressive cycles. This work provides a new pathway for constructing polymer-based materials with super-elasticity at deep cryogenic temperature, demonstrating much promise for extensive applications in ongoing and near-future aerospace exploration.

| S-EPMC8253740 | biostudies-literature

Auxetic Carbon Honeycomb: Strain-Tunable Phase Transitions and Novel Negative Poisson's Ratio.

Project description:Auxetic structure and tunable phase transitions are fascinating properties for future application. Herein, we propose two three-dimensional (3D) carbon honeycombs (CHC), known as Cmcm -CHC and Cmmm-CHC. Based on first-principles calculations, these novel 3D materials exhibit auxeticity with a fascinating negative Poisson's ratio, which stems from (i) the puckered structure of Cmcm -CHC along the tube axis and (ii) significant change of angle-dominant deformation for Cmmm-CHC in the armchair direction. In addition, the moderate strain drives semimetal to semiconductor phase transition in CHCs, which thoroughly establishes its C-C bond formation. In the meantime, two new phases, namely P63/mmc-CHC and P6/mmm-CHC, form and exhibit semiconductor characteristics. Our results also show that Cmcm -CHC and P63/mmc-CHC are superhard materials. The outstanding negative Poisson's ratio and phase transition properties make CHCs highly versatile for innovative applications in microelectromechanical and nanoelectronic devices.

| S-EPMC8209820 | biostudies-literature

Nanocellulose aerogels as 3D amyloid templates.

Project description:Proteins in solution tend to coat solid surfaces upon exposure. Depending on the nature of the surface, the environmental conditions, and the nature of the protein these adsorbed proteins may self-assemble into ordered, fibre-like structures called amyloids. Nanoparticulate surfaces, with their high surface to volume ratio, are particularly favourable to amyloid formation. Most prior research has focussed on either inorganic or organic nanoparticles in solution. In this research, we instead focus on aerogels created from TEMPO-oxidized cellulose nanofibers (TO-CNF) to serve as bio-based, three-dimensional amyloid templates with a tuneable surface chemistry. Previous research on the use of cellulose as a protein adsorption template has shown no evidence of a change in the secondary protein structure. Herein, however, with the aid of the reducing agent TCEP, we were able to induce the formation of amyloid-like 'worms' on the surface of TO-CNF aerogels. Furthermore, we demonstrate that the addition of the TO-CNF aerogel can also induce bulk aggregation under conditions where it previously did not exist. Finally, we show that the addition of the aerogel increases the rate of 'worm' formation in conditions where previous research has found a long lag-phase. Therefore, TO-CNF aerogels are shown to be excellent templates for inducing ordered protein aggregation.

| S-EPMC10653027 | biostudies-literature

Harnessing out-of-plane deformation to design 3D architected lattice metamaterials with tunable Poisson's ratio.

Project description:Auxetic materials exhibiting a negative Poisson's ratio are of great research interest due to their unusual mechanical responses and a wide range of potential deployment. Efforts have been devoted to exploring novel 2D and 3D auxetic structures through rational design, optimization, and taking inspiration from nature. Here we report a 3D architected lattice system showing a negative Poisson's ratio over a wide range of applied uniaxial stretch. 3D printing, experimental tests, numerical simulation, and analytical modeling are implemented to quantify the evolution of the Poisson's ratio and reveal the underlying mechanisms responsible for this unusual behavior. We further show that the auxetic behavior can be controlled by tailoring the geometric features of the ligaments. The findings reported here provide a new routine to design architected metamaterial systems exhibiting unusual properties and having a wide range of potential applications.

| S-EPMC5566377 | biostudies-literature

Biohybrid Nanocellulose-Lysozyme Amyloid Aerogels via Electrostatic Complexation.

Project description:Modern science is increasingly turning to nature for inspiration to design sustainable biomaterials in a smart and effective way. Herein, we describe biohybrid aerogels based on electrostatic complexation between cellulose and proteins-two of the most abundant natural polymers on Earth. The effects of both particle surface charge and particle size are investigated with respect to aerogel properties including the morphology, surface area, stability, and mechanical strength. Specifically, negatively charged nanocellulose (cellulose nanocrystals and cellulose nanofibers) and positively charged lysozyme amyloid fibers (full-length and shortened via sonication) are investigated in the preparation of fibrillar aerogels, whereby the nanocellulose component was found to have the largest effect on the resulting aerogel properties. Although electrostatic interactions between these two classes of charged nanoparticles allow us to avoid the use of any cross-linking agents, the resulting aerogels demonstrate a simple additive performance as compared to their respective single-component aerogels. This lack of synergy indicates that although electrostatic complexation certainly leads to the formation of local aggregates, these interactions alone may not be strong enough to synergistically improve bulk aerogel properties. Nevertheless, the results reported herein represent a critical step toward a broader understanding of biohybrid materials based on cellulose and proteins.

| S-EPMC8757363 | biostudies-literature

Flexible sensors with zero Poisson's ratio.

Project description:Flexible sensors have been developed for the perception of various stimuli. However, complex deformation, usually resulting from forces or strains from multi-axes, can be challenging to measure due to the lack of independent perception of multiaxial stimuli. Herein, flexible sensors based on the metamaterial membrane with zero Poisson's ratio (ZPR) are proposed to achieve independent detection of biaxial stimuli. By deliberately designing the geometric dimensions and arrangement parameters of elements, the Poisson's ratio of an elastomer membrane can be modulated from negative to positive, and the ZPR membrane can maintain a constant transverse dimension under longitudinal stimuli. Due to the accurate monitoring of grasping force by ZPR sensors that are insensitive to curvatures of contact surfaces, rigid robotic manipulators can be guided to safely grasp deformable objects. Meanwhile, the ZPR sensor can also precisely distinguish different states of manipulators. When ZPR sensors are attached to a thermal-actuation soft robot, they can accurately detect the moving distance and direction. This work presents a new strategy for independent biaxial stimuli perception through the design of mechanical metamaterials, and may inspire the future development of advanced flexible sensors for healthcare, human-machine interfaces and robotic tactile sensing.

| S-EPMC10989663 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data