Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Improved Dissolution Rate and Intestinal Absorption of Fexofenadine Hydrochloride by the Preparation of Solid Dispersions: In Vitro and In Situ Evaluation.

ABSTRACT: The objective of this study was to enhance dissolution and permeation of a low soluble, absorbable fexofenadine hydrochloride (FFH) by preparing solid dispersions using polyethylene glycol 20,000 (PEG 20,000) and poloxamer 188 as carriers. The phase solubility measurement for the supplied FFH revealed a linear increase in the solubility of fexofenadine with increasing carrier concentration in water (1.45 mg/mL to 11.78 mg/mL with 0% w/v to 30% w/v PEG 20,000; 1.45 mg/mL to 12.27 mg/mL with 0% w/v to 30% w/v poloxamer 188). To select the appropriate drug carrier concentration, a series of solid dispersions were prepared in the drug carrier weight ratios of 1:1, 1:2 and 1:4 by fusion method. The solid dispersions composed of drug carrier at 1:4 weight ratio showed highest dissolution with the time required for the release of 50% of the drug <15 min compared to the supplied FFH (>120 min). The intestinal absorption study presented a significant improvement in the absorption of drug from the solid dispersions composed of poloxamer 188 than PEG 20,000. In summary, the solid dispersions of FFH prepared using PEG 20,000 and poloxamer 188 demonstrated improved dissolution and absorption than supplied FFH and could be used to improve the oral bioavailability of fexofenadine.

SUBMITTER: Eedara BB

PROVIDER: S-EPMC7997449 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Solid Form and Phase Transformation Properties of Fexofenadine Hydrochloride during Wet Granulation Process.

Project description:The quality control of drug products during manufacturing processes is important, particularly the presence of different polymorphic forms in active pharmaceutical ingredients (APIs) during production, which could affect the performance of the formulated products. The objective of this study was to investigate the phase transformation of fexofenadine hydrochloride (FXD) and its influence on the quality and performance of the drug. Water addition was key controlling factor for the polymorphic conversion from Form I to Form II (hydrate) during the wet granulation process of FXD. Water-induced phase transformation of FXD was studied and quantified with XRD and thermal analysis. When FXD was mixed with water, it rapidly converted to Form II, while the conversion is retarded when FXD is formulated with excipients. In addition, the conversion was totally inhibited when the water content was <15% w/w. The relationship between phase transformation and water content was studied at the small scale, and it was also applicable for the scale-up during wet granulation. The effect of phase transition on the FXD tablet performance was investigated by evaluating granule characterization and dissolution behavior. It was shown that, during the transition, the dissolved FXD acted as a binder to improve the properties of granules, such as density and flowability. However, if the water was over added, it can lead to the incomplete release of the FXD during dissolution. In order to balance the quality attributes and the dissolution of granules, the phase transition of FXD and the water amount added should be controlled during wet granulation.

| S-EPMC8229471 | biostudies-literature

Contribution of Crystal Lattice Energy on the Dissolution Behavior of Eutectic Solid Dispersions.

Project description:In the literature, it is reported that eutectics lead to the enhanced dissolution of a poorly soluble compound. However, the solubility theory suggests that since crystal structures of two components are unchanged that all else being equal, the dissolution rates of a fused mixture (FM) should be the same as a physical mixture (PM). The influence of crystal lattice energy on dissolution profiles was investigated using the PM and FM. Experimental phase diagrams constructed using differential scanning calorimetry data were compared with those theoretically derived. Deviation of the experimental phase diagram curves from the theoretical model indicates the nonideal behavior of both systems (ibuprofen/poly(ethylene glycol)-6000 and acetaminophen/caffeine). Both the binary systems showed an increase in the dissolution rate of the PM and FM. However, the dissolution from the PM was comparable with the FM's dissolution profile. The theoretical solubility calculations using the modified solubility equation showed that the use of the eutectic temperature instead of the drug's melting point should give a 3-4-fold increase in drug solubility. However, the correlation between dissolution and solubility calculation showed that the FM did not improve the dissolution when compared with the respective PM's dissolution profile. The proposed explanation is that the unchanged crystal lattice energy in eutectics still limits the solubility and therefore the dissolution rate.

| S-EPMC7203706 | biostudies-literature

Co-amorphous solid dispersion systems of lacidipine-spironolactone with improved dissolution rate and enhanced physical stability.

Project description:Co-amorphous solid dispersion (C-ASD) systems have attracted great attention to improve the solubility of poorly soluble drugs, but the selection of an appropriate stabilizer to stabilize amorphous forms is still a huge challenge. Herein, C-ASD system of two clinical combined used drugs (lacidipine (LCDP) and spironolactone (SPL)) as stabilizers to each other, was prepared by solvent evaporation method. The effects of variation in molar ratio of LCDP and SPL (3:1, 1:1, 1:3, 1:6, and 1:9) on the drug release characteristics were explored. Polarized light microscopy (PLM), powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were employed to evaluate the solid states. Prepared C-ASDs were further studied for their stability under the high humidity (RH 92.5%). Further analysis of C-ASDs via Fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy confirmed that hydrogen bond interactions between the two drugs played a significant role in maintaining the stability of the C-ASDs systems. Moreover, molecular dynamic (MD) simulations provided a clear insight into the stability mechanism at the molecular level. This study demonstrated the novel drug-drug C-ASDs systems is a promising formulation strategy for improved dissolution rate and enhanced physical stability of poorly soluble drugs.

| S-EPMC7032115 | biostudies-literature

Investigating the Dissolution Performance of Amorphous Solid Dispersions Using Magnetic Resonance Imaging and Proton NMR.

Project description:We have investigated the dissolution performance of amorphous solid dispersions of poorly water-soluble bicalutamide in a Kollidon VA64 polymeric matrix as a function of the drug loading (5% vs. 30% bicalutamide). A combined suite of state-of-the-art analytical techniques were employed to obtain a clear picture of the drug release, including an integrated magnetic resonance imaging UV-Vis flow cell system and 1H-NMR. Off-line 1H-NMR was used for the first time to simultaneously measure the dissolution profiles and rates of both the drug and the polymer from a solid dispersion. MRI and 1H-NMR data showed that the 5% drug loading compact erodes linearly, and that bicalutamide and Kollidon VA64 are released at approximately the same rate from the molecular dispersion. For the 30% extrudate, data indicated a slower water ingress into the compact which corresponds to a slower dissolution rate of both bicalutamide and Kollidon VA64.

| S-EPMC6331940 | biostudies-literature

Physical Stability and Dissolution of Lumefantrine Amorphous Solid Dispersions Produced by Spray Anti-Solvent Precipitation.

Project description:This study aims to develop amorphous solid dispersion (ASD) of lumefantrine with a cost-effective approach of spray anti-solvent precipitation. Four acidic polymers, hydroxypropylmethylcellulose phthalate (HPMCP), hydroxypropylmethylcellulose acetate succinate (HPMCAS), poly(methacrylic acid-ethyl acrylate) (EL100) and cellulose acetate phthalate (CAP) were studied as excipients at various drug-polymer ratios. Of the studied polymers, satisfactory physical stability was demonstrated for HPMCP- and HPMCAS-based ASDs with no observed powder X-ray diffraction peaks for up to 3 months of storage at 40 °C/75% RH. HPMCP and HPMCAS ASDs also achieved greater drug release levels in the dissolution study than other polymers. The HPMCP-based ASDs with a drug:polymer ratio of 2:8 exhibited a maximum drug release of 140 μg/mL for up to 2 h, which is significantly higher than the currently marketed formulation of Coartem® (<80 ng/mL). Relatively, the CAP and EL100 ASDs indicated a higher water content and crystallized within a day when stored at 40 °C/75% RH. The choice of polymer, and the drug-polymer ratio played a crucial role in the solubility enhancement of lumefantrine. Our study indicates that the developed spray anti-solvent precipitation method could be an affordable approach for producing ASDs.

| S-EPMC8141512 | biostudies-literature

Preparation and Characterization of Amorphous Solid Dispersions for the Solubilization of Fenretinide.

Project description:Fenretinide (4-HPR), a retinoid derivative, has shown high antitumor activity, a low toxicological profile, and no induction of resistance. Despite these favorable features, the variability in oral absorption due to its low solubility combined with the high hepatic first pass effect strongly reduce clinical outcomes. To overcome the solubility and dissolution challenges of poorly water-soluble 4-HPR, we prepared a solid dispersion of the drug (4-HPR-P5) using a hydrophilic copolymer (P5) previously synthesized by our team as the solubilizing agent. The molecularly dispersed drug was obtained by antisolvent co-precipitation, an easy and up-scalable technique. A higher drug apparent solubility (1134-fold increase) and a markedly faster dissolution were obtained. In water, the colloidal dispersion showed a mean hydrodynamic diameter of 249 nm and positive zeta potential (+41.3 mV), confirming the suitability of the formulation for intravenous administration. The solid nanoparticles were also characterized by a high drug payload (37%), as was also evidenced by a chemometric-assisted Fourier transform infrared spectroscopy (FTIR) investigation. The 4-HPR-P5 exhibited antiproliferative activity, with IC50 values of 1.25 and 1.93 µM on IMR-32 and SH-SY5Y neuroblastoma cells, respectively. Our data confirmed that the 4-HPR-P5 formulation developed herein was able to increase drug apparent aqueous solubility and provide an extended release over time, thus suggesting that it represents an efficient approach to improve 4-HPR bioavailability.

| S-EPMC10052200 | biostudies-literature

Effect of fexofenadine hydrochloride on allergic rhinitis aggravated by air pollutants.

Project description:In recent decades, seasonal allergic rhinitis (SAR) prevalence has increased and recent studies have shown that air pollutants, such as diesel exhaust particles (DEP), can increase inflammatory and allergic biomarkers. The aim of this study was to investigate the effects of DEP on SAR symptoms induced by ragweed and to evaluate the efficacy and safety of fexofenadine HCl 180 mg versus placebo. This phase 3, single-centre, sequential, parallel-group, double-blind, randomised study (NCT03664882) was conducted in an environmental exposure unit (EEU) during sequential exposures: Period 1 (ragweed pollen alone), Period 2 (ragweed pollen+DEP), and Period 3 (ragweed pollen+DEP+single-dose fexofenadine HCl 180 mg or placebo). Efficacy and safety were evaluated in Period 3. Primary endpoints were the area under the curve (AUC) of total nasal symptom score (TNSS) from baseline to hour 12 (AUC0-12) during Period 1 and Period 2; and the AUC of the TNSS from hour 2 to 12 (AUC2-12) during Period 3. 251 out of 257 evaluable subjects were included in the modified intent-to-treat population. Least squares mean difference (95% CI) for TNSS Log AUC0-12 in Period 2 versus Period 1 was 0.13 (0.081-0.182; p<0.0001). Least squares mean difference in TNSS Log AUC2-12 for fexofenadine HCl versus placebo during Period 3 was -0.24 (-0.425--0.047; p=0.0148). One fexofenadine HCl-related adverse event was observed. SAR symptoms evoked by ragweed were aggravated by DEP. Fexofenadine HCl 180 mg was effective in relieving pollen-induced, air pollution-aggravated allergic rhinitis symptoms.

| S-EPMC8021806 | biostudies-literature

Improved solubility, dissolution rate, and oral bioavailability of main biflavonoids from <i>Selaginella doederleinii</i> extract by amorphous solid dispersion.

Project description:Amentoflavone, robustaflavone, 2″,3″-dihydro-3',3‴-biapigenin, 3',3‴-binaringenin, and delicaflavone are five major hydrophobic components in the total biflavonoids extract from Selaginella doederleinii (TBESD) that display favorable anticancer properties. The purpose of this study was to develop a new oral delivery formulation to improve the solubilities, dissolution rates, and oral bioavailabilities of the main ingredients in TBESD by the solid dispersion technique. Solid dispersions of TBESD with various hydrophilic polymers were prepared, and different technologies were applied to select the suitable carrier and method. TBESD amorphous solid dispersion (TBESD-ASD) with polyvinylpyrrolidone K-30 was successfully prepared by the solvent evaporation method. The physicochemical properties of TBESD-ASD were investigated by scanning electron microscopy, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. As a result, TBESD was found to be molecularly dispersed in the amorphous carrier. The solubilities and dissolution rates of all five ingredients in the TBESD-ASD were significantly increased (nearly 100% release), compared with raw TBESD. Meanwhile, TBESD-ASD showed good preservation stability for 3 months under accelerated conditions of 40 °C and 75% relative humidity. A subsequent pharmacokinetic study in rats revealed that Cmax and AUC0-t of all five components were significantly increased by the solid dispersion preparation. An in vivo study clearly revealed that compared to raw TBESD, a significant reduction in tumor size and microvascular density occurred after oral administration of TBESD-ASD to xenograft-bearing tumor mice. Collectively, the developed TBESD-ASD with the improved solubility, dissolution rates and oral bio-availabilities of the main ingredients could be a promising chemotherapeutic agent for cancer treatment.

| S-EPMC7034131 | biostudies-literature

Processing of Polyvinyl Acetate Phthalate in Hot-Melt Extrusion-Preparation of Amorphous Solid Dispersions.

Project description:The preparation of amorphous solid dispersions (ASDs) is a suitable approach to overcome solubility-limited absorption of poorly soluble drugs. In particular, pH-dependent soluble polymers have proven to be an excellently suitable carrier material for ASDs. Polyvinyl acetate phthalate (PVAP) is a polymer with a pH-dependent solubility, which is as yet not thoroughly characterized regarding its suitability for a hot-melt extrusion process. The objective of this study was to assess the processability of PVAP within a hot-melt extrusion process with the aim of preparing an ASD. Therefore, the influence of different process parameters (temperature, feed-rate) on the degree of degradation, solid-state and dissolution time of the neat polymer was studied. Subsequently, drug-containing ASDs with indomethacin (IND) and dipyridamole (DPD) were prepared, respectively, and analyzed regarding drug content, solid-state, non-sink dissolution performance and storage stability. PVAP was extrudable in combination with 10% (w/w) PEG 3000 as plasticizer. The dissolution time of PVAP was only slightly influenced by different process parameters. For IND no degradation occurred in combination with PVAP and single phased ASDs could be generated. The dissolution performance of the IND-PVAP ASD at pH 5.5 was superior and at pH 6.8 equivalent compared to commonly used polymers hydroxypropylmethylcellulose acetate succinate (HPMCAS) and Eudragit L100-55.

| S-EPMC7238276 | biostudies-literature

Preparation and characterization of liquisolid compacts for improved dissolution of telmisartan.

Project description:The objective of the present work was to obtain pH independent and improved dissolution profile for a poorly soluble drug, telmisartan using liquisolid compacts. Liquisolid compacts were prepared using Transcutol HP as vehicle, Avicel PH102 as carrier, and Aerosil 200 as a coating material. The formulations were evaluated for drug excipient interactions, change in crystallinity of drug, flow properties, and general quality control tests of tablets using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), X-ray diffraction (XRD), angle of repose, and various pharmacopoeial tests. In vitro dissolution studies were performed at three pH conditions (1.2, 4.5 and 7.4). Stability studies were performed at 40°C and 75% RH for three months. The formulation was found to comply with Indian pharmacopoeial limits for tablets. FTIR studies confirmed no interaction between drug and excipients. XRD and DSC studies indicate change/reduction in crystallinity of drug. Dissolution media were selected based on the solubility studies. The optimized formulation showed pH independent release profile with significant improvement (P < 0.005) in dissolution compared to plain drug and conventional marketed formulation. No significant difference was seen in the tablet properties, and drug release profile after storage for 3 months.

| S-EPMC4211305 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data