Browse
Submit Data
Databases
API
Help

Dataset Information

5 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Luteolin-Fabricated ZnO Nanostructures Showed PLK-1 Mediated Anti-Breast Cancer Activity.

ABSTRACT: The present work describes a facile and convenient procedure for synthesizing zinc oxide nanoparticles using luteolin isolated from Eclipta alba plant (L-ZnONPs) at room temperature. The formation of as-grown L-ZnONPs was confirmed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), and selected area electron diffraction (SAED). The Wurtzite structure of ZnO was observed by its hexagonal phases in diffraction patterns. The SEM images revealed the different sizes and morphologies of L-ZnONPs, with diameters between 12 and 25 nm. The HR-TEM result showed that the inter-planar distance between two lattice fringes was 0.262 nm, which coincides with the d-spacing of (002) and (101) lattice planes of the as-obtained material. The anticancer activity of L-ZnONPs against the breast cancer cell line MCF-7 was greater as compared to that of luteolin or ZnO alone. The mechanistic evaluation of such an activity carried out using in silico methods suggested that the anti-breast cancer activity of L-ZnONPs was mediated by polo-like kinase 1 (PLK1) proteins.

SUBMITTER: Kollur SP

PROVIDER: S-EPMC7998981 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Bio-Inspired Hierarchical Micro-/Nanostructures for Anti-Icing Solely Fabricated by Metal-Assisted Chemical Etching

Project description:We report a cost-effective and scalable methodology for producing a hierarchical micro-/nanostructured silicon surface solely by metal-assisted chemical etching. It involves two major processing steps of fabricating micropillars and nanowires separately. The process of producing micro-scale structures by masked metal-assisted chemical etching was optimized. Silicon nanowires were created on the micropillar’s surface via maskless metal-assisted chemical etching. The hierarchical micro-/nanostructured surface exhibits superhydrophobic properties with a high contact angle of ~156° and a low sliding angle of <2.5° for deionized water. Furthermore, due to the existence of microscale and nanoscale air trapped at the liquid/solid interface, it exhibits a long ice delay time of 2876 s at −5 °C, more than 5 times longer than that of smooth surfaces. Compared to conventional dry etching methods, the metal-assisted chemical etching approach excludes vacuum environments and high-temperature processes and can be applied for applications requiring hierarchical micro-/nanostructured surfaces or structures.

| S-EPMC9317431 | biostudies-literature

Polymerized Luteolin Nanoparticles: Synthesis, Structure Elucidation, and Anti-Inflammatory Activity.

Project description:Luteolin is an anti-inflammatory flavonoid commonly found in many edible plants. The compound is popularly consumed as a supplement regardless of its poor water solubility (27.8 μg/mL at 25 °C) and low bioavailability. Here, mild one-pot polymerization of luteolin into water-dispersible nanospheres, with an average dry size of 234.8 ± 101.6 nm, an aqueous size distribution of 379.1 ± 220.5 nm (PDI = 0.338), an average ζ-potential of -36.2 ± 0.2 mV, and an 89.3 ± 4.8% yield, is described. The nanospheres consist of polymerized luteolin (polyluteolin) with a weight-average molecular mass of around 410000 Da. The chemical structure of polyluteolin is identified through 1H-1H correlated spectroscopy (COSY), 1H-13C heteronuclear single-quantum coherence (HSQC), and 1H-13C heteronuclear multiple-bond correlation (HMBC) NMR spectroscopic analyses of the oligomers, and a polymerization mechanism is proposed. Unlike luteolin that showed both dose-dependent anti-inflammatory activity and cytotoxicity when tested in lipopolysaccharide-stimulated macrophages, the polyluteolin nanoparticles possess dose-dependent anti-inflammatory activity without causing cell death even at high concentrations.

| S-EPMC7860061 | biostudies-literature

Enhanced Photocatalytic Activity and Photoluminescence of ZnO Nano-Wires Coupled with Aluminum Nanostructures.

Project description:In this study, we fabricated a hybrid plasmonic/semiconductor material by combining the chemical bath deposition of zinc oxide nanowires (ZnONWs) with the physical vapor deposition of aluminum nanostructures (AlNSs) under controlled temperature and atmosphere. The morphological and the optical properties of the ZnONWs/AlNSs hybrid material fabricated at different temperatures (250, 350, and 450 °C) and thicknesses (5, 7, and 9 nm) of Al layers were investigated. By adjusting the deposition and annealing parameters, it was possible to tune the size distribution of the AlNSs. The resonant coupling between the plasmonic AlNSs and ZnONWs leads to an enhanced photoluminescence response. The photocatalytic activity was studied through photodegradation under UV-light irradiation of methylene blue (MB) adsorbed at the surface of ZnO. The MB photodegradation experiment reveals that the ZnONWs covered with 7 nm aluminum film and annealed at 450 °C exhibit the highest degradation efficiency. The comparison between ZnONws and ZnONws/AlNSs shows a photoluminescence enhancement factor of 1.7 and an increase in the kinetics constant of photodegradation with a factor of 4.

| S-EPMC9182769 | biostudies-literature

Anion-Regulated Synthesis of ZnO 1D Necklace-Like Nanostructures with High Photocatalytic Activity.

Project description:One-dimensional (1D) nanomaterials with specific architectures have received increasing attention for both scientific and technological interests for their applications in catalysis, sensing, and energy conversion, etc. However, the development of an operable and simple method for the fabrication of 1D nanostructures remains a challenge. In this work, we developed an "anion-regulated morphology" strategy, in which anions could regulate the dimensionally-restricted anisotropic growth of ZnO nanomaterials by adjusting the surface energy of different growth facets. ZnO 1D necklace-like nanostructures (NNS) could be prepared through a hydrothermal treatment of zinc acetate and urea mixture together with a subsequent calcination procedure at 400 °C. While replacing the acetate ions to nitrate, sulfate, and chlorion ions produced ZnO nanoflowers, nanosheets and hexagonal nanoplates, respectively. Density functional theory calculations were carried out to explain the mechanism behind the anions-regulating anisotropic crystal growth. The specified ZnO 1D NNS offered improved electron transport while the grain surface could supply enlarged specific surface area, thus providing advanced photocatalytic ability in the following photodegradation of methyl orange (MO). Among the four photocatalysts with different morphologies, ZnO 1D NNS, possessing the highest catalytic activity, degraded 57.29% MO in the photocatalytic reaction, which was 2 times, 10 times and 17 times higher than nanoflowers, nanosheets and hexagonal nanoplates, respectively. Our work provides new ideas for the construction and application of ZnO 1D nanomaterials.

| S-EPMC7642098 | biostudies-literature

Gas-sensing behaviour of ZnO/diamond nanostructures.

Project description:Microstructured single- and double-layered sensor devices based on p-type hydrogen-terminated nanocrystalline diamond (NCD) films and/or n-type ZnO nanorods (NRs) have been obtained via a facile microwave-plasma-enhanced chemical vapour deposition process or a hydrothermal growth procedure. The morphology and crystal structure of the synthesized materials was analysed with scanning electron microscopy, X-ray diffraction measurements and Raman spectroscopy. The gas sensing properties of the sensors based on i) NCD films, ii) ZnO nanorods, and iii) hybrid ZnO NRs/NCD structures were evaluated with respect to oxidizing (i.e., NO2, CO2) and reducing (i.e., NH3) gases at 150 °C. The hybrid ZnO NRs/NCD sensor showed a remarkably enhanced NO2 response compared to the ZnO NRs sensor. Further, inspired by this special hybrid structure, the simulation of interaction between the gas molecules (NO2 and CO2) and hybrid ZnO NRs/NCD sensor was studied using DFT calculations.

| S-EPMC5769078 | biostudies-literature

One-Step Hydrothermal Synthesis of Comb-Like ZnO Nanostructures.

Project description:Zinc Oxide (ZnO) nano-superstructures (NSSs) have attracted intense research interests due to their large surface areas and unique properties. In this work, we report an original approach to synthesize ZnO NSSs in a one-step manner with a hydrothermal method. The crystalline structures and growth mechanism can be understood by surface energy calculations. The reaction kinetics was investigated for the control of the morphology of ZnO NSSs. The critical role of the morphology of Au catalysts in the synthesis of ZnO nanostructures has been demonstrated. Such ZnO NSSs can be fabricated on various rigid and flexible substrates for applications in electronics, solar cells and piezoelectric devices.

| S-EPMC3500587 | biostudies-literature

Hierarchical Ag Nanostructures Fabricated from Silver Coordination Polymers for Antibacterial Surface.

Project description:A hierarchical silver nanostructure with improved antibacterial property was fabricated utilizing silver coordination polymer. Octadecanethiolate?silver polymer was synthesized to have a layered structure and was coated on silicon wafer by drop-casting method utilizing hydrophobic?hydrophobic interaction. Thus, the silver coordination polymer was calcined under reductive condition to produce zero-valent silver with a hierarchical nanostructure. X-ray diffraction patterns revealed that layered silver coordination polymer successfully transformed to hexagonal silver upon calcination. According to scanning electron and atomic force microscopy, silver coordination polymer with ~145.5 nm size was homogeneously coated on the surface before calcination, and it evolved micrometer-sized lumps and grooves which were composed of ~58.8 nm sized Ag nanoparticles. The hierarchical structure-micrometer lump/groove consisting of Ag nanoparticles-would be advantageous to kill bacteria; micrometer-grooves provide physical condition (pocket for bacteria capture) and the Ag nanoparticles from the neighboring lump endow chemical condition (antibacterial property of released Ag?). The antibacterial activity test on Escherichia coli via colony forming inhibitory assay indeed exhibited an improved antibacterial activity of hierarchical Ag nanostructure compared with the surface simply coated with Ag nanoparticles. From the line profile of atomic force microscopy, the bacterium trapped in the hierarchical Ag nanostructure was shown to interact intimately with Ag surface.

| S-EPMC6401719 | biostudies-literature

Anti-cancer activity of ZnO chips by sustained zinc ion release.

Project description:We report anti-cancer activity of ZnO thin-film-coated chips by sustained release of zinc ions. ZnO chips were fabricated by precisely tuning ZnO thickness using atomic layer deposition, and their potential to release zinc ions relative to the number of deposition cycles was evaluated. ZnO chips exhibited selective cytotoxicity in human B lymphocyte Raji cells while having no effect on human peripheral blood mononuclear cells. Of importance, the half-maximal inhibitory concentration of the ZnO chip on the viability of Raji cells was 121.5 cycles, which was comparable to 65.7 nM of daunorubicin, an anti-cancer drug for leukemia. Molecular analysis of cells treated with ZnO chips revealed that zinc ions released from the chips increased cellular levels of reactive oxygen species, including hydrogen peroxide, which led to the down-regulation of anti-apoptotic molecules (such as HIF-1α, survivin, cIAP-2, claspin, p-53, and XIAP) and caspase-dependent apoptosis. Because the anti-cancer activity of ZnO chips and the mode of action were comparable to those of daunorubicin, the development and optimization of ZnO chips that gradually release zinc ions might have clinical anti-cancer potential. A further understanding of the biological action of ZnO-related products is crucial for designing safe biomaterials with applications in disease treatment.

| S-EPMC5615914 | biostudies-literature

Enhanced photocatalytic performance of TiO2-ZnO hybrid nanostructures.

Project description:We studied the photocatalytic properties of rational designed TiO2-ZnO hybrid nanostructures, which were fabricated by the site-specific deposition of amorphous TiO2 on the tips of ZnO nanorods. Compared with the pure components of ZnO nanorods and amorphous TiO2 nanoparticles, these TiO2-ZnO hybrid nanostructures demonstrated a higher catalytic activity. The strong green emission quenching observed from photoluminescence of TiO2-ZnO hybrid nanostructures implied an enhanced charge transfer/separation process resulting from the novel type II heterostructures with fine interfaces. The catalytic performance of annealing products with different TiO2 phase varied with the annealing temperatures. This is attributed to the combinational changes in Eg of the TiO2 phase, the specific surface area and the quantity of surface hydroxyl groups.

| S-EPMC3933911 | biostudies-other

On the Efficacy of ZnO Nanostructures against SARS-CoV-2.

Project description:In 2019, the new coronavirus disease (COVID-19), related to the severe acute respiratory syndrome coronavirus (SARS-CoV-2), started spreading around the word, giving rise to the world pandemic we are still facing. Since then, many strategies for the prevention and control of COVID-19 have been studied and implemented. In addition to pharmacological treatments and vaccines, it is mandatory to ensure the cleaning and disinfection of the skin and inanimate surfaces, especially in those contexts where the contagion could spread quickly, such as hospitals and clinical laboratories, schools, transport, and public places in general. Here, we report the efficacy of ZnO nanoparticles (ZnONPs) against SARS-CoV-2. NPs were produced using an ecofriendly method and fully characterized; their antiviral activity was tested in vitro against SARS-CoV-2, showing a decrease in viral load between 70% and 90%, as a function of the material's composition. Application of these nano-antimicrobials as coatings for commonly touched surfaces is envisaged.

| S-EPMC8950216 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data