Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Structure-Gas Barrier Property Relationship in a Novel Polyimide Containing Naphthalene and Amide Groups: Evaluation by Experiments and Simulations.

ABSTRACT: In order to meet the increasingly stringent requirements for heat resistance and barrier properties in the packaging and electronic device encapsulation field. A high-barrier polyimide (NAPPI) contains naphthalene ring and amide group was prepared by polymerization of a novel diamine (NAPDA) and pyromellitic dianhydride. The structure and properties of diamine monomers and polymers were characterized. Results show that the NAPPI exhibits superior barrier properties with extremely low water vapor and oxygen transmission rate values of 0.14 g·m^-2·day^-1 and 0.04 cm³·m^-2·day^-1, respectively. In addition, the NAPPI presents outstanding mechanical properties and thermal stability as well. This article attempts to explore the relationship between NAPPI structure and barrier properties by combining experiment and simulation. Studies on positron annihilation lifetime spectroscopy, Wide angle X-ray diffractograms and molecular dynamics simulations prove that the NAPPI has smaller interplanar spacing and higher chain regularity. In addition, the strong chain rigidity and interchain cohesion of NAPPI due to the presence of the rigid naphthalene ring and a large number of hydrogen bond interactions formed by amide groups result in compact chain packing and smaller free volume, which reduces the solubility and diffusibility of small molecules in the matrix. In general, the simulation results are consistent with the experimental results, which are important for understanding the barrier mechanism of NAPPI.

SUBMITTER: Zeng Y

PROVIDER: S-EPMC7999945 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High-Barrier Polyimide Containing Carbazole Moiety: Synthesis, Gas Barrier Properties, and Molecular Simulations.

Project description:A high-barrier polyimide (2,7-CPI) was synthesized through the polymerization of pyromellitic dianhydride (PMDA) and a novel diamine (2,7-CDA) containing carbazole moiety. The synthesized diamine and polyimide were fully characterized by elemental analyses, FTIR and NMR. The 2,7-CPI displays very attractive barrier performances, with oxygen transmission rate (OTR) and water vapor transmission rate (WVTR) low to 0.14 cm3·m-2·day-1 and 0.05 g·m-2·day-1, respectively. Meanwhile, 2,7-CPI also exhibits exceptional thermal stability with a glass transition temperature (Tg) of 467 °C, 5% weight-loss temperature (Td5%) of 550 °C under N2 and coefficient of thermal expansion (CTE) of 3.4 ppm/K. The barrier performances of 2,7-CPI are compared with those of a structural analogue (2,7-CPPI) and a typical polyimide (Kapton). Their barrier performances with respect to microstructure were investigated by molecular simulations, wide angle X-ray diffraction (WAXD), and positron annihilation lifetime spectroscopy (PALS). The results show that 2,7-CPI possesses better coplanar structure and more number of intermolecular hydrogen bonds among the three PIs, which result in tight chain packing and thereby high crystallinity, low free volume, and decreased chains mobility. That is, the high crystallinity and low free volume of 2,7-CPI reduce the diffusion and solubility of gases. Meanwhile, the poor chains mobility further decreases the gases diffusion. The reduced diffusion and solubility of gases consequently promote the improvement of barrier properties for 2,7-CPI. The polyimide has a wide application prospect in the field of flexible electronic packaging industries.

| S-EPMC7565694 | biostudies-literature

Structure and Gas Barrier Properties of Polyimide Containing a Rigid Planar Fluorene Moiety and an Amide Group: Insights from Molecular Simulations.

Project description:A novel diamine (FAPDA) bearing rigid planar fluorene and amide groups was successfully synthesized. Using such diamine and pyromellitic dianhydride (PMDA), a high-barrier polyimide (FAPPI) was obtained. FAPPI exhibits an outstanding gas barrier. Its water vapor transmission rate (WVTR) and oxygen transmission rate (OTR) are as low as 0.51 g·m-2·day-1 and 0.43 cm3·m-2·day-1, respectively. Additionally, FAPPI shows excellent thermal stability with a coefficient of thermal expansion (CTE) of 5.8 ppm·K-1 and a glass transition temperature (T g) of 416 °C. Molecular simulations, positron annihilation, and X-ray diffraction were utilized to gain insight on the microstructures for the enhanced barrier properties. Introducing fluorene moieties and amide groups improves the regularity and rigidity of molecular chains and increases interchain interaction of PI, resulting in low free volumes and decreased movement capacity of the chain. The low free volumes of FAPPI restrain the gas diffusivity and solubility. Meanwhile, the decreased chain movement reduces the diffusivity of gases. Consequently, barrier performances of FAPPI are improved. The polyimide possesses widespread application in the microelectronics packaging fields.

| S-EPMC7906589 | biostudies-literature

Impact of Backbone Amide Substitution at the Meta- and Para-Positions on the Gas Barrier Properties of Polyimide.

Project description:This study designed and synthesised a meta-amide-substituted dianiline monomer (m-DABA) as a stereoisomer of DABA, a previously investigated para-amide-substituted dianiline monomer. This new monomer was polymerised with pyromellitic dianhydride (PMDA) to prepare a polyimide film (m-DABPI) in a process similar to that employed in a previous study. The relationship between the substitution positions on the monomer and the gas barrier properties of the polyimide film was investigated via molecular simulation, wide-angle X-ray diffraction (WXRD), and positron annihilation lifetime spectroscopy (PALS) to gain deeper insights into the gas barrier mechanism. The results showed that compared with the para-substituted DABPI, the m-DABPI exhibited better gas barrier properties, with a water vapour transmission rate (WVTR) and an oxygen transmission rate (OTR) as low as 2.8 g·m-2·d-1 and 3.3 cm3·m-2·d-1, respectively. This was because the meta-linked polyimide molecular chains were more tightly packed, leading to a smaller free volume and lower molecular chain mobility. These properties are not conducive to the permeation of small molecules into the film; thus, the gas barrier properties were improved. The findings have significant implications for the structural design of high-barrier materials and could promote the development of flexible display technology.

| S-EPMC8122393 | biostudies-literature

Rheological and Mechanical Properties of Thermoplastic Crystallizable Polyimide-Based Nanocomposites Filled with Carbon Nanotubes: Computer Simulations and Experiments.

Project description:Recently, a strong structural ordering of thermoplastic semi-crystalline polyimides near single-walled carbon nanotubes (SWCNTs) was found that can enhance their mechanical properties. In this study, a comparative analysis of the results of microsecond-scale all-atom computer simulations and experimental measurements of thermoplastic semi-crystalline polyimide R-BAPB synthesized on the basis of dianhydride R (1,3-bis-(3',4-dicarboxyphenoxy) benzene) and diamine BAPB (4,4'-bis-(4″-aminophenoxy) biphenyl) near the SWCNTs on the rheological properties of nanocomposites was performed. We observe the viscosity increase in the SWCNT-filled R-BAPB in the melt state both in computer simulations and experiments. For the first time, it is proven by computer simulation that this viscosity change is related to the structural ordering of the R-BAPB in the vicinity of SWCNT but not to the formation of interchain linkage. Additionally, strong anisotropy of the rheological properties of the R-BAPB near the SWCNT surface was detected due to the polyimide chain orientation. The increase in the viscosity of the polymer in the viscous-flow state and an increase in the values of the mechanical characteristics (Young's modulus and yield peak) of the SWCNT-R-BAPB nanocomposites in the glassy state are stronger in the directions along the ordering of polymer chains close to the carbon nanofiller surface. Thus, the new experimental data obtained on the R-BAPB-based nanocomposites filled with SWCNT, being extensively compared with simulation results, confirm the idea of the influence of macromolecular ordering near the carbon nanotube on the mechanical characteristics of the composite material.

| S-EPMC9370852 | biostudies-literature

Polyimides Containing Phosphaphenanthrene Skeleton: Gas-Transport Properties and Molecular Dynamics Simulations.

Project description:A series of new semifluorinated polyimide (PI) films with phosphaphenanthrene skeleton were prepared by thermal imidization of poly(amic acid)s derived from a diamine monomer: 1,1-bis[2'-trifluoromethyl-4'-(4?-aminophenyl)phenoxy]-1-(6-oxido-6H-dibenz?c,e??1,2?oxaphosphorin-6-yl)ethane on reaction with four structurally different aromatic dianhydrides. The chemical structures of the polymers were established by Fourier transform infrared and 1H NMR spectroscopy techniques. The polymers showed a good combination of thermal and mechanical properties (T d10 up to 416 °C under synthetic air and tensile strength up to 91 MPa), low dielectric constant (2.10-2.55 at 1 MHz), and T g values as high as 261 °C. Gas permeabilities of these films were investigated for four different gases CO2, O2, N2, and CH4. The PI films showed high gas permeability (P CO2 up to 175 and P O2 up to 64 barrer) with high permselectivity (P CO2 /P CH4 up to 51 and P O2 /P N2 up to 7.1), and the values are better than those of many other similar polymers reported earlier. For the O2/N2 gas pair, the PIs (PI A) surpassed the present upper boundary limit drawn by Robeson. A detailed molecular dynamics (MD) simulation study has been conducted to understand better the gas-transport properties. The effect of phosphaphenanthrene skeleton, its spatial arrangement, and size distribution function of the free volume were studied using molecular dynamics (MD) simulation and the results are correlated with the experimental data.

| S-EPMC6644473 | biostudies-literature

Super-Toughed PLA Blown Film with Enhanced Gas Barrier Property Available for Packaging and Agricultural Applications.

Project description:Polylactic acid (PLA) holds enormous potential as an alternative to the ubiquitous petroleum-based plastics to be used in packaging film and agricultural film. However, the poor viscoelastic behavior and its extremely low melt strength means it fails to meet the requirements in film blowing processing, which is the most efficient film processing method with the lowest costs. Also, the PLA's brittleness and insufficient gas barrier properties also seriously limit PLA's potential application as a common film material. Herein, special stereocomplex (SC) networks were introduced to improve the melt strength and film blowing stability of PLA; polyethylene glycol (PEG) was introduced to improve PLA's toughness and gas barrier properties. Compared with neat poly(l-lactide) acid (PLLA), modified PLA is stable in the film blowing process and its film elongation at break increases more than 18 times and reaches over 250%, and its O2 permeability coefficient decreased by 61%. The resulting film material also has good light transmittance, which has great potential for green packaging applications, such as disposable packaging and agricultural films.

| S-EPMC6567083 | biostudies-literature

The Effect of Molecular Isomerism on the Barrier Properties of Polyimides: Perspectives from Experiments and Simulations.

Project description:A novel carbazole-containing diamine (M-2,7-CPDA) isomer of our previously reported diamine 2,7-CPDA, has been synthesized using a two-step synthesis. Compared with 2,7-CPDA, the substituted position of amino is changed from para to meta for M-2,7-CPDA. The two diamines were polymerized with pyromellitic dianhydride (PMDA) to prepare two isomeric polyimides (M-2,7-CPPI and 2,7-CPPI), respectively. The effects of para/meta isomerism on microstructures and gas barrier performances of the two isomeric polyimides were studied by positron annihilation test, X-ray diffraction and molecular simulation. The results display that meta-connected M-2,7-CPPI has less ordered chain structure and weaker hydrogen bonding than para-connected 2,7-CPPI, which leads to loose chain stacking and thereby increased free volumes of M-2,7-CPPI. The higher free volumes promote the solubility and diffusivity of gas in M-2,7-CPPI. As a result, the meta-linked M-2,7-CPPI shows a lower gas barrier than its para-linked analog. The work provides guidance for the design and synthesis of high-performance barrier polymers.

| S-EPMC8198498 | biostudies-literature

"All Polyimide" Mixed Matrix Membranes for High Performance Gas Separation.

Project description:To improve the interfacial compatibility of mixed matrix membranes (MMMs) for gas separation, microporous polyimide particle (AP) was designed, synthesized, and introduced into intrinsic microporous polyimide matrix (6FDA-Durene) to form "all polyimide" MMMs. The AP fillers showed the feature of thermal stability, similar density with polyimide matrix, high porosity, high fractional free volume, large microporous dimension, and interpenetrating network architecture. As expected, the excellent interfacial compatibility between 6FDA-Durene and AP without obvious agglomeration even at a high AP loading of 10 wt.% was observed. As a result, the CO2 permeability coefficient of MMM with AP loading as low as 5 wt.% reaches up to 1291.13 Barrer, which is 2.58 times that of the pristine 6FDA-Durene membrane without the significant sacrificing of ideal selectivity of CO2/CH4. The improvement of permeability properties is much better than that of the previously reported MMMs, where high filler content is required to achieve a high permeability increase but usually leads to significant agglomeration or phase separation of fillers. It is believed that the excellent interfacial compatibility between the PI fillers and the PI matrix induce the effective utilization of porosity and free volume of AP fillers during gas transport. Thus, a higher diffusion coefficient of MMMs has been observed than that of the pristine PI membrane. Furthermore, the rigid polyimide fillers also result in the excellent anti-plasticization ability for CO2. The MMMs with a 10 wt.% AP loading shows a CO2 plasticization pressure of 300 psi.

| S-EPMC8073420 | biostudies-literature

Hybrid Fluorescent Poly(silsesquioxanes) with Amide- and Triazole-Containing Side Groups for Light Harvesting and Cation Sensing.

Project description:Hybrid polymers containing pyrene (Py) units bound to linear poly(silsesquioxane) (LPSQ) chains through flexible linkers containing heteroatoms (S, N, O) (LPSQ-triazole-Py and LPSQ-amide-Py) exhibit intense fluorescence emission, both in very diluted solutions (c = 10-8 mol/L) and in the solid state. The materials are thermally stable and exhibit good thin film forming abilities. Their optical and physicochemical properties were found to be strongly dependent on the structure of the side chains. Comparative studies with octahedral silsesquioxane (POSS) analogues (POSS-triazole-Py and POSS-amide-Py) emphasized the role of the specific double-strand architecture of the LPSQ backbone and distribution of side Py groups for their photo-luminescent properties. The new hybrid materials were tested as fluorescence energy donors to red-emitting dyes (Nile Red and Coumarine 6). All the silsesquioxanes studied were found to be able to transfer FL emission energy to Coumarin 6, irrespectively of their spatial structure. However, due to the differences in the wavelength range of FL emission, only LPSQ-triazole-Py were able to act as energy donors to Nile Red. The Py-grafted LPSQ may be also applied for development of soluble and highly emissive chemosensors. Their fluorescent nature was explored for the detection of Cu(II), Fe(III), Co(II), Ag(I), Hg(II), Mg(II), Ca(II), Pb(II) and Zn(II). The morphology of the side chains and hydrogen-bonding interactions influenced the sensing capacity of all the studied materials.

| S-EPMC7600812 | biostudies-literature

Preparation and Interfacial Properties of Hydroxyl-Containing Polyimide Fibers

Project description:Developing polyimide (PI) fibers with excellent interfacial adhesion and high mechanical properties for the PI fiber-reinforced polymer matrix composites (PFRPs) industry has been challenging. In this work, 4,4′-diamino-(1,1′-biphenyl)-3,3′-diol (HAB) diamine was introduced into the rigid molecular chains, and the high-performance PI fibers, presenting an interfacial shear strength (IFSS) value of 46.33 MPa, tensile strength of 2.62 GPa, and modulus of 100.15 GPa, were successfully manufactured when the content of HAB in mixed diamines was 30 mol %. Fourier transform infrared (FTIR) spectroscopy identified the presence of intermolecular H-bonding interactions, and 2D small-angle X-ray scattering indicated that the introduction of HAB moiety contributed to reducing the radii of microvoids in the fibers, which were considered to be the key factors leading to a significant enhancement in the mechanical properties of the fibers. X-ray photoelectron spectroscopy (XPS) and the static contact angle intuitively illustrated that the synthetic fiber surface contained active hydroxyl groups. The IFSS value of PI fiber/epoxy resin composites (PI/EPs) was 56.47 MPa when the content of HAB reached 70 mol %. Failure morphologies confirmed that the interfacial adhesion of PI/EPs was enhanced owing to the surface activity of PI fibers. Consequently, this study provides an effective strategy to the long-standing problems of high mechanical performances and poor surface activity for traditional PI fibers used in the PFRPs industry.

| S-EPMC9967378 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data