Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrochemical Sensor for Determination of Various Phenolic Compounds in Wine Samples Using Fe₃O₄ Nanoparticles Modified Carbon Paste Electrode.

ABSTRACT: Phenolic compounds contain classes of flavonoids and non-flavonoids, which occur naturally as secondary metabolites in plants. These compounds, when consumed in food substances, improve human health because of their antioxidant properties against oxidative damage diseases. In this study, an electrochemical sensor was developed using a carbon paste electrode (CPE) modified with Fe₃O₄ nanoparticles (MCPE) for the electrosensitive determination of sinapic acid, syringic acid, and rutin. The characterization techniques adapted for CPE, MCPE electrodes, and the solution interface were cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). Scan rate and pH were the parameters subjected to optimization studies for the determination of phenolic compounds. The incorporation of Fe₃O₄ nanoparticles to the CPE as a sensor showed excellent sensitivity, selectivity, repeatability, reproducibility, stability, and low preparation cost. The limits of detection (LOD) obtained were 2.2 × 10^-7 M for sinapic acid, 2.6 × 10^-7 M for syringic acid, and 0.8 × 10^-7 M for rutin, respectively. The fabricated electrochemical sensor was applied to determine phenolic compounds in real samples of red and white wine.

SUBMITTER: Pwavodi PC

PROVIDER: S-EPMC8002544 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Electrochemical sensor based on low silica X zeolite modified carbon paste for carbaryl determination.

Project description:A new and simple approach for carbaryl determination in natural sample was proposed using Low Silica X (LSX) zeolite modified carbon paste electrode. LSX zeolite with a porous structure was incorporated into carbon paste electrode in the appropriate portion. The prepared electrode was then characterized using scanning electron microscopy, cyclic voltammetry and electrochemical impedance spectroscopy. Various experimental parameters as the zeolite amounts, pH, accumulation time, and differential pulse voltammetric parameters were optimized. Under optimal conditions, a linear response was obtained in the range of 1-100 µM of carbaryl using differential pulse voltammetry with detection limit of 0.3 µM (S/N = 3). The sensors showed good selectivity, stability, and reproducibility and has been successfully applied for detection of carbaryl in tomato samples with good recoveries.

| S-EPMC5602751 | biostudies-literature

Carbon Quantum Dot-Modified Carbon Paste Electrode-Based Sensor for Selective and Sensitive Determination of Adrenaline.

Project description:A carbon quantum dot-based carbon paste electrode was fabricated and used for the determination of adrenaline (AD) at the nanomolar level. This fabricated electrode exhibited tremendous electrocatalytic activity for the oxidation of adrenaline in supporting electrolyte (PBS of pH 7.4). Scan rate variation studies with the modified electrode revealed that the overall electrode process was controlled by a diffusion process. A lower detection limit of 6 nM was achieved by chronoamperometry. Interference by biological molecules such as serotonin (5-HT) and ascorbic acid (AA) in the electrochemical oxidation of AD on the fabricated electrode was tested. It was observed that with the modified electrode, the selective determination of AD was possible. Further, with the fabricated electrode, simultaneous analysis of AA, AD, and 5-HT was performed, and it was observed that the overlapped peaks of these analytes on the naked electrode were well resolved into three peaks on the modified electrode. Along with decent sensitivity and selectivity, the electrode also showed higher stability and antifouling nature. The real-time application of the projected scheme was proven by employing the said electrode for adrenaline in adrenaline bitartrate injections.

| S-EPMC6648597 | biostudies-literature

Electrochemical Method for Ease Determination of Sodium Diclofenac Trace Levels in Water Using Graphene-Multi-Walled Carbon Nanotubes Paste Electrode.

Project description:Sodium diclofenac (DCF) presence reported in water use cycle at various concentrations including trace levels necessitates continuous development of advanced analytical method for its determination. In this work, ease electrochemical methods for DCF determination based on voltammetric and amperometric techniques were proposed using a simple combination of graphene with multi-walled carbon nanotubes as paste electrode. Integration of the graphene with multi-walled carbon nanotubes enlarged the electroactive surface area of the electrode and implicitly enhanced the electrochemical response for DCF determination. On the basis of the sorption autocatalytic effect manifested at low concentration of DCF, we found that the preconcentration step applied prior to differential-pulsed voltammetry (DPV) and multiple-pulsed amperometry (MPA) allowed for the enhancement of the electroanalytical performance of the DCF electrochemical detections, which were validated by testing in tap water. The lowest limit of detection (LOD) of 1.40 ng·L-1 was found using preconcentration prior to DPV under optimized operating conditions, which is better than that reached by other carbon-based electrodes reported in the literature.

| S-EPMC8750901 | biostudies-literature

Electrochemical determination of zinc(II) using N1-hydroxy-N1,N2-diphenylbenzamidine and multi-walled carbon nanotubes modified carbon paste electrode

Project description:In this study, a new carbon paste electrode modified with a laboratory-synthesized ligand, N1-hydroxy-N1,N2-diphenylbenzamidine (HDPBA) and multi-walled carbon nanotubes (MWCNTs) (HDPBA‒MWCNTs/CPE) has been developed. The modified electrode was applied for preconcentration and voltammetric determination of zinc ions (Zn(II)) by square wave anodic stripping voltammetry (SWASV). The preconcentration of Zn(II) on the electrode surface was performed in 0.1 M Brinton Robinson (B–R) buffer solution (pH 6) at an applied potential of −1.30 V versus Ag/AgCl for 120 s, followed by stripping in the positive potential scan of the SWASV after a quit time of 10 s. Under optimized experimental conditions, the proposed electrode exhibited a wider linear dynamic response for Zn(II) in a concentration range of 0.02–10.00 μM with a detection limit of 2.48 nM. This is due to the excellent metal-chelation property of the ligand, and the good conductivity and large surface area of MWCNTs which significantly improved the sensing performance of the nanocomposite modified electrode. The selectivity of the electrode was studied by evaluating the interference effects of various foreign ions on the peak current of Zn(II). The method exhibited high reproducibility with a relative standard deviation (RSD) of 3.1%. The present method was applied for the determination of zinc ions in water samples. The recovery values in the tested samples were found to be 98.50–106.0%, indicating a good accuracy of the proposed electrode. Furthermore, the electrochemical behavior of HDPBA in acetonitrile and aqueous solutions has been studied.

| S-EPMC10293732 | biostudies-literature

Surfactant Modified Graphite Paste Electrode as an Electrochemical Sensor for the Enhanced Voltammetric Detection of Estriol with Dopamine and Uric acid.

Project description:Purpose: Estriol (ERL) is a type of hormone among the groups of estrogen hormone that was detected through the voltammetric technique by constructing an electrochemical sensor based on the octoxynol-9 modified graphite paste electrode (OXL-9MGPE). Methods: Using the strategy of cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with a bare graphite paste electrode (BGPE) immobilized with OXL-9, ERL electro-oxidation has been assessed in 0.2 M phosphate buffer solution (PBS) of pH 6.0. The fabricated electrode has substantial electrochemical sensing efficiency, and the ERL oxidation at the OXL-9MGPE was the irreversible process. The surface morphological characteristics of BGPE and OXL-9MGPE were differentiated with the help of field emission scanning electron microscopy (FE-SEM). Results: The impact of various factors such as scan rate, pH, reproducibility, repeatability, and stability on the electro-oxidation of ERL was evaluated. Techniques of CV and DPV were utilized to determine ERL, dopamine (DAN), and uric acid (URA) simultaneously with the projected sensor. The peak current was varied with ERL concentration in the range from 4×10-5 to 1.2×10-4 M at OXL-9MGPE. From this, the detection limit 1.4×10 -6 M and limit of quantification (LOQ) 4.7×10-6 M have been attained. Conclusion: As a result, OXL-9MGPE was successfully achieved as an electrochemical detector for the electro analysis of ERL via the CV technique.

| S-EPMC7191228 | biostudies-literature

Cobalt Oxide Nanoparticles/Graphene/Ionic Liquid Crystal Modified Carbon Paste Electrochemical Sensor for Ultra-sensitive Determination of a Narcotic Drug.

Project description:Purpose: Drug-abuse, namely morphine (MO) affects the metabolism of neurotransmitters such as dopamine (DA). Therefore, it is crucial to devise a sensitive sensing technique to simultaneously determine both compounds in real samples. Methods: The fabrication of the sensor is based on in situ modification of a carbon paste (CP) electrode with cobalt oxide nanoparticles, graphene, and ionic liquid crystal in presence of sodium dodecyl sulfate; CoGILCCP-SDS. The modified sensor is characterized using scanning electron microscopy, electrochemical impedance spectroscopy and voltammetry measurements. Results: Electron transfer kinetics and analytical performance of the proposed sensor were enhanced due to the synergistic role of all the modifiers. The simultaneous determination of MO and DA achieved low detection limits of 0.54 nmol L-1 and 0.25 nmol L-1, respectively. Besides, a carbon-based electrochemical sensor is fabricated for the nano-molar determination of MO in real samples and formulations. The sensor showed fouling resistance and anti-interference ability in presence of other species in human fluids. The real sample analysis of MO was successfully achieved with good recovery results in urine samples and pharmaceutical tablets. Linear dynamic range, sensitivity, detection limit and quantification limit of MO in urine were 5 nmol L-1 to 0.6 ?mol L-1, 6.19 ?A/?mol L-1, 0.484 nmol L-1 and 1.61 nmol L-1, respectively. Conclusion: This sensor has great ability to be extended for electrochemical applications in assaying of many drugs.

| S-EPMC6468225 | biostudies-literature

Design of a Sensitive and Selective Voltammetric Sensor Based on a Cationic Surfactant-Modified Carbon Paste Electrode for the Determination of Alloxan.

Project description:Alloxan (AL) is a toxic glucose analogue that acts as a potent diabetogenic inducer by selectively destroying the insulin-producing ?-cells of the pancreas. Hence, a sensitive and selective cetyl trimethylammonium bromide (CTAB)-immobilized carbon paste electrode was utilized for the analysis of AL in the existence of anthrone. The CTAB-modified carbon paste electrode in contrast with the bare carbon paste electrode showed a magnificent behavior for the electrocatalytic oxidation of AL by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods. CV studies reveal a quasi-reversible diffusion-controlled process in the potential window of -0.5 to 0.4 V at an optimum pH of 6.5 in 0.2 M phosphate buffer solution. The electrode materials were characterized by CV, field emission-scanning electron microscopy, and electrochemical impedance spectroscopy. Under optimized experimental conditions, low detection limits of 1.09 and 3.64 ?M were obtained in a linear dynamic range of 5-80 ?M and from 8 to 90 ?M by DPV and CV methods, respectively. The performance of the modified electrode is impressive in terms of least charge transfer resistance (R ct), surface concentration (?), and heterogeneous electron transfer rate constant (k 0). A 50-fold excess concentration of other potential interferants such as food additives and other organic species present in the human body does not significantly alter the peak potential and peak current of AL. The analytical application of the modified sensor was appraised by determining AL in the spiked refined flour sample. The modified sensor with a swift fabrication procedure exhibited enduring stability, adequate reproducibility, and acceptable repeatability.

| S-EPMC7496031 | biostudies-literature

Potentiometric Phosphate Ion Sensor Based on Electrochemical Modified Tungsten Electrode.

Project description:Determination of phosphate ions in aqueous solutions attracts a great deal of interest in the areas of environment, medicine, and agriculture. As phosphoric acid is a poly basic acid, the different forms of existence at different pH result in direct determination facing a big challenge. Herein, we reported a potentiometric phosphate ion sensor based on a surface-modified tungsten electrode. Pure tungsten was electrodeposited at a constant potential of 0.2 V versus Ag|AgCl in Na2HPO4. WO3 and H3O40PW12·xH2O were electrodeposited on the surface of the tungsten electrode. The modified tungsten electrode was used as a working electrode in a two-electrode system to detect the concentration of phosphate ions in aqueous solutions. The detection limit of the modified tungsten electrode for phosphate ions is 10-6 M from pH 7 to pH 8 and 10-5 M from pH 9 to pH 10. It has good selectivity to other common anions. The long-term monitoring experiment showed that the potential fluctuation was less than ±3 mV in 24 h. Compared to conventional determination methods, the current phosphate ion sensor showed a close value in a real sample. The mechanism of phosphate ion response was investigated in detail. This sensor possesses advantages of simple manufacture, low cost, a wide pH range for detecting, and good selectivity.

| S-EPMC8173557 | biostudies-literature

Novel Design of a Layered Electrochemical Dopamine Sensor in Real Samples Based on Gold Nanoparticles/?-Cyclodextrin/Nafion-Modified Gold Electrode.

Project description:Change in the level of dopamine (DA) concentration in the human body causes critical diseases such as schizophrenia and Parkinson's disease. Therefore, the determination of DA concentration and monitoring its level in human body fluids is of great importance. An electrochemical sensor based on modification of the gold electrode surface with Nafion (NF), ?-cyclodextrin (CD), and gold nanoparticles (AuNPs) was fabricated for the determination of DA in biological fluids. Combined impact of all the modifiers enhances the catalytic activity of the sensor. Gold nanoparticles increase the surface area of the sensor and enhance the electron transfer rate. CD plays a main role in enhancing the accumulation of protonated DA and forming stable complexes via electrostatic interactions and hydrogen bond formation. In addition, extra preconcentration of positively charged DA is achieved through ionic selectivity of NF. High electrocatalytic activity was achieved using the modified sensor for determination of DA in real urine samples in a wide concentration range, 0.05-280 ?M with a low detection limit of 0.6 nM in the small linear dynamic range, 0.05-20 ?M. Furthermore, common overlapped oxidation peaks of DA in presence of biologically interfering compounds at the gold electrode were resolved by using the modified sensor. Excellent recovery results were obtained using the proposed method for determination of DA in real urine samples.

| S-EPMC6843716 | biostudies-literature

Heteroatom-enriched and renewable banana-stem-derived porous carbon for the electrochemical determination of nitrite in various water samples.

Project description:For the first time, high-surface-area (approximately 1465 m(2) g(-1)), highly porous and heteroatom-enriched activated carbon (HAC) was prepared from banana stems (Musa paradisiaca, Family: Musaceae) at different carbonization temperatures of 700, 800 and 900 °C (HAC) using a simple and eco-friendly method. The amounts of carbon, hydrogen, nitrogen and sulfur in the HAC are 61.12, 2.567, 0.4315, and 0.349%, respectively. Using X-ray diffraction (XRD), CHNS elemental analysis, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy, the prepared activated carbon appears amorphous and disordered in nature. Here, we used HAC for an electrochemical application of nitrite (NO2(-)) sensor to control the environmental pollution. In addition, HAC exhibits noteworthy performance for the highly sensitive determination of nitrite. The limit of detection (LODs) of the nitrite sensor at HAC-modified GCE is 0.07 ?M. In addition, the proposed method was applied to determine nitrite in various water samples with acceptable results.

| S-EPMC3996480 | biostudies-literature