Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Thermal expansion coefficient of few-layer MoS₂ studied by temperature-dependent Raman spectroscopy.

ABSTRACT: The thermal expansion coefficient is an important thermal parameter that influences the performance of nanodevices based on two-dimensional materials. To obtain the thermal expansion coefficient of few-layer MoS₂, suspended MoS₂ and supported MoS₂ were systematically investigated using Raman spectroscopy in the temperature range from 77 to 557 K. The temperature-dependent evolution of the Raman frequency shift for suspended MoS₂ exhibited prominent differences from that for supported MoS₂, obviously demonstrating the effect due to the thermal expansion coefficient mismatch between MoS₂ and the substrate. The intrinsic thermal expansion coefficients of MoS₂ with different numbers of layers were calculated. Interestingly, negative thermal expansion coefficients were obtained below 175 K, which was attributed to the bending vibrations in the MoS₂ layer during cooling. Our results demonstrate that Raman spectroscopy is a feasible tool for investigating the thermal properties of few-layer MoS₂ and will provide useful information for its further application in photoelectronic devices.

SUBMITTER: Lin Z

PROVIDER: S-EPMC8007611 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Probing stacking configurations in a few layered MoS2 by low frequency Raman spectroscopy.

Project description:Novel two-dimensional (2D) layered materials, such as MoS2, have recently gained a significant traction, chiefly due to their tunable electronic and optical properties. A major attribute that affects the tunability is the number of layers in the system. Another important, but often overlooked aspect is the stacking configuration between the layers, which can modify their electro-optic properties through changes in internal symmetries and interlayer interactions. This demands a thorough understanding of interlayer stacking configurations of these materials before they can be used in devices. Here, we investigate the spatial distribution of various stacking configurations and variations in interlayer interactions in few-layered MoS2 flakes probed through the low-frequency Raman spectroscopy, which we establish as a versatile imaging tool for this purpose. Some interesting anomalies in MoS2 layer stacking, which we propose to be caused by defects, wrinkles or twist between the layers, are also reported here. These types of anomalies, which can severely affect the properties of these materials can be detected through low-frequency Raman imaging. Our findings provide useful insights for understanding various structure-dependent properties of 2D materials that could be of great importance for the development of future electro-optic devices, quantum devices and energy harvesting systems.

| S-EPMC7718217 | biostudies-literature

Energy Dissipation Pathways in Few-Layer MoS2 Nanoelectromechanical Systems.

Project description:Free standing, atomically thin transition metal dichalcogenides are a new class of ultralightweight nanoelectromechanical systems with potentially game-changing electro- and opto-mechanical properties, however, the energy dissipation pathways that fundamentally limit the performance of these systems is still poorly understood. Here, we identify the dominant energy dissipation pathways in few-layer MoS2 nanoelectromechanical systems. The low temperature quality factors and resonant frequencies are shown to significantly decrease upon heating to 293 K, and we find the temperature dependence of the energy dissipation can be explained when accounting for both intrinsic and extrinsic damping sources. A transition in the dominant dissipation pathways occurs at T ~ 110 K with relatively larger contributions from phonon-phonon and electrostatic interactions for T > 110 K and larger contributions from clamping losses for T < 110 K. We further demonstrate a room temperature thermomechanical-noise-limited force sensitivity of ~8 fN/Hz1/2 that, despite multiple dissipation pathways, remains effectively constant over the course of more than four years. Our results provide insight into the mechanisms limiting the performance of nanoelectromechanical systems derived from few-layer materials, which is vital to the development of next-generation force and mass sensors.

| S-EPMC5515974 | biostudies-literature

Low-Frequency Raman Spectroscopy of Few-Layer 2H-SnS2.

Project description:We investigated interlayer phonon modes of mechanically exfoliated few-layer 2H-SnS2 samples by using room temperature low-frequency micro-Raman spectroscopy. Raman measurements were performed using laser wavelengths of 441.6, 514.4, 532 and 632.8?nm with power below 100??W and inside a vacuum chamber to avoid photo-oxidation. The intralayer Eg and A1g modes are observed at ~206?cm-1 and 314?cm-1, respectively, but the Eg mode is much weaker for all excitation energies. The A1g mode exhibits strong resonant enhancement for the 532?nm (2.33?eV) laser. In the low-frequency region, interlayer vibrational modes of shear and breathing modes are observed. These modes show characteristic dependence on the number of layers. The strengths of the interlayer interactions are estimated by fitting the interlayer mode frequencies using the linear chain model and are found to be 1.64?×?1019?N?·?m-3 and 5.03?×?1019?N?·?m-3 for the shear and breathing modes, respectively.

| S-EPMC6033902 | biostudies-other

Optical Contrast and Raman Spectroscopy Techniques Applied to Few-Layer 2D Hexagonal Boron Nitride.

Project description:The successful integration of few-layer thick hexagonal boron nitride (hBN) into devices based on two-dimensional materials requires fast and non-destructive techniques to quantify their thickness. Optical contrast methods and Raman spectroscopy have been widely used to estimate the thickness of two-dimensional semiconductors and semi-metals. However, they have so far not been applied to two-dimensional insulators. In this work, we demonstrate the ability of optical contrast techniques to estimate the thickness of few-layer hBN on SiO2/Si substrates, which was also measured by atomic force microscopy. Optical contrast of hBN on SiO2/Si substrates exhibits a linear trend with the number of hBN monolayers in the few-layer thickness range. We also used bandpass filters (500-650 nm) to improve the effectiveness of the optical contrast methods for thickness estimations. We also investigated the thickness dependence of the high frequency in-plane E2g phonon mode of atomically thin hBN on SiO2/Si substrates by micro-Raman spectroscopy, which exhibits a weak thickness-dependence attributable to the in-plane vibration character of this mode. Ab initio calculations of the Raman active phonon modes of atomically thin free-standing crystals support these results, even if the substrate can reduce the frequency shift of the E2g phonon mode by reducing the hBN thickness. Therefore, the optical contrast method arises as the most suitable and fast technique to estimate the thickness of hBN nanosheets.

| S-EPMC6669639 | biostudies-literature

Plasmonic Ag-Decorated Few-Layer MoS2 Nanosheets Vertically Grown on Graphene for Efficient Photoelectrochemical Water Splitting.

Project description:A controllable approach that combines surface plasmon resonance and two-dimensional (2D) graphene/MoS2 heterojunction has not been implemented despite its potential for efficient photoelectrochemical (PEC) water splitting. In this study, plasmonic Ag-decorated 2D MoS2 nanosheets were vertically grown on graphene substrates in a practical large-scale manner through metalorganic chemical vapor deposition of MoS2 and thermal evaporation of Ag. The plasmonic Ag-decorated MoS2 nanosheets on graphene yielded up to 10 times higher photo-to-dark current ratio than MoS2 nanosheets on indium tin oxide. The significantly enhanced PEC activity could be attributed to the synergetic effects of SPR and favorable graphene/2D MoS2 heterojunction. Plasmonic Ag nanoparticles not only increased visible-light and near-infrared absorption of 2D MoS2, but also induced highly amplified local electric field intensity in 2D MoS2. In addition, the vertically aligned 2D MoS2 on graphene acted as a desirable heterostructure for efficient separation and transportation of photo-generated carriers. This study provides a promising path for exploiting the full potential of 2D MoS2 for practical large-scale and efficient PEC water-splitting applications.

| S-EPMC7770824 | biostudies-literature

Layer-by-layer epitaxy of multi-layer MoS2 wafers.

Project description:The 2D semiconductor of MoS2 has great potential for advanced electronics technologies beyond silicon. So far, high-quality monolayer MoS2 wafers have been available and various demonstrations from individual transistors to integrated circuits have also been shown. In addition to the monolayer, multilayers have narrower band gaps but improved carrier mobilities and current capacities over the monolayer. However, achieving high-quality multi-layer MoS2 wafers remains a challenge. Here we report the growth of high-quality multi-layer MoS2 4-inch wafers via the layer-by-layer epitaxy process. The epitaxy leads to well-defined stacking orders between adjacent epitaxial layers and offers a delicate control of layer numbers up to six. Systematic evaluations on the atomic structures and electronic properties were carried out for achieved wafers with different layer numbers. Significant improvements in device performances were found in thicker-layer field-effect transistors (FETs), as expected. For example, the average field-effect mobility (μ FE) at room temperature (RT) can increase from ∼80 cm2·V-1·s-1 for monolayers to ∼110/145 cm2·V-1·s-1 for bilayer/trilayer devices. The highest RT μ FE of 234.7 cm2·V-1·s-1 and record-high on-current densities of 1.70 mA·μm-1 at V ds = 2 V were also achieved in trilayer MoS2 FETs with a high on/off ratio of >107. Our work hence moves a step closer to practical applications of 2D MoS2 in electronics.

| S-EPMC9232293 | biostudies-literature

Characterization of Few-Layer 1T' MoTe2 by Polarization-Resolved Second Harmonic Generation and Raman Scattering.

Project description:We study the crystal symmetry of few-layer 1T' MoTe2 using the polarization dependence of the second harmonic generation (SHG) and Raman scattering. Bulk 1T' MoTe2 is known to be inversion symmetric; however, we find that the inversion symmetry is broken for finite crystals with even numbers of layers, resulting in strong SHG comparable to other transition-metal dichalcogenides. Group theory analysis of the polarization dependence of the Raman signals allows for the definitive assignment of all the Raman modes in 1T' MoTe2 and clears up a discrepancy in the literature. The Raman results were also compared with density functional theory simulations and are in excellent agreement with the layer-dependent variations of the Raman modes. The experimental measurements also determine the relationship between the crystal axes and the polarization dependence of the SHG and Raman scattering, which now allows the anisotropy of polarized SHG or Raman signal to independently determine the crystal orientation.

| S-EPMC5542881 | biostudies-literature

Intervalley scattering by acoustic phonons in two-dimensional MoS2 revealed by double-resonance Raman spectroscopy.

Project description:Double-resonance Raman scattering is a sensitive probe to study the electron-phonon scattering pathways in crystals. For semiconducting two-dimensional transition-metal dichalcogenides, the double-resonance Raman process involves different valleys and phonons in the Brillouin zone, and it has not yet been fully understood. Here we present a multiple energy excitation Raman study in conjunction with density functional theory calculations that unveil the double-resonance Raman scattering process in monolayer and bulk MoS2. Results show that the frequency of some Raman features shifts when changing the excitation energy, and first-principle simulations confirm that such bands arise from distinct acoustic phonons, connecting different valley states. The double-resonance Raman process is affected by the indirect-to-direct bandgap transition, and a comparison of results in monolayer and bulk allows the assignment of each Raman feature near the M or K points of the Brillouin zone. Our work highlights the underlying physics of intervalley scattering of electrons by acoustic phonons, which is essential for valley depolarization in MoS2.

| S-EPMC5347091 | biostudies-literature

Raman Spectra Shift of Few-Layer IV-VI 2D Materials.

Project description:Raman spectroscopy is the most commonly used method to investigate structures of materials. Recently, few-layered IV-VI 2D materials (SnS, SnSe, GeS, and GeSe) have been found and ignited significant interest in electronic and optical applications. However, unlike few-layer graphene, in which its interlayer structures such as the number of its layers are confirmed through measurement of the Raman scattering, few-layer IV-VI 2D materials have not yet been developed to the point of understanding their interlayer structure. Here we performed first-principles calculations on Raman spectroscopy for few-layer IV-VI 2D materials. In addition to achieving consistent results with measurements of bulk structures, we revealed significant red and blue shifts of characteristic Raman modes up to 100?cm-1 associated with the layer number. These shifts of lattice vibrational modes originate from the change of the bond lengths between the metal atoms and chalcogen atoms through the change of the interlayer interactions. Particularly, our study shows weak covalent bonding between interlayers, making the evolution of Raman signals according to the thickness different from other vdW materials. Our results suggest a new way for obtaining information of layer structure of few-layer IV-VI 2D materials through Raman spectroscopy.

| S-EPMC6925276 | biostudies-literature

A facile preparation of FePt-loaded few-layer MoS2 nanosheets nanocomposites (F-MoS2-FePt NCs) and their application for colorimetric detection of H2O2 in living cells.

Project description:BackgroundRapid and sensitive detection of H2O2 especially endogenous H2O2 is of great importance for series of industries including disease diagnosis and therapy. In this work, uniform FePt nanoparticles are successfully anchored onto Few-layer molybdenum disulfide nanosheets (F-MoS2 NSs). The powder X-ray diffraction, transmission electron microscopy, UV-Vis spectra and atomic force microscopy were employed to confirm the structure of the obtained nanocomposites (F-MoS2-FePt NCs). The prepared nanocomposites show efficient peroxidase-like catalytic activities verified by catalyzing the peroxidation substrate 4,4'-diamino-3,3',5,5'-tetramethylbiphenyl (TMB) with the existence of H2O2.ResultsThe optimal conditions of the constructed colorimetric sensing platform is proved as 35 °C and pH 4.2. Under optimal catalytic conditions, the detection limit for H2O2 detection reaches 2.24 ?M and the linear ranger is 8 ?M to 300 ?M. Furthermore, the proposed colorimetric sensing platform was successfully utilized to detect the intracellular H2O2 of cancer cells (MCF-7).ConclusionsThese findings indicated that the F-MoS2-FePt-TMB-H2O2 system provides a potential sensing platform for hydrogen peroxide monitoring in living cells.

| S-EPMC6417205 | biostudies-literature