Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Experimental Investigation of the Attachment Performance between Coal Particle and Bubble.

ABSTRACT: Attachment behavior is a key component of flotation and has a decisive influence on flotation performance, and the experiment research on the attachment between mineral particles and bubbles still needs further research. In this work, a particle-bubble attachment apparatus and multiple target tracking software were developed. Coal particles were used as the subjects, and the effect of particle properties on the attachment performance was studied from the perspective of the particle group. The particle-bubble attachment experiments indicated that the collision position had an effect on the attachment efficiency, and the attachment efficiency decreased with an increase in the collision angle. The efficiency-weighted attachment angle was proposed to quantitatively describe the attachment performance of coal samples. The efficiency-weighted attachment angle of low-density coal samples was greater than that of high-density coal samples. For particles with different sizes, the efficiency-weighted attachment angle of fine particles was greater than that of coarse particles. Furthermore, SDS weakened the attachment performance between coal particles and bubbles via adsorption on the bubble, and the efficiency-weighted attachment angle decreased as the concentration of the SDS solution increased. CTAB adsorbed on coal particles and bubbles, and the efficiency-weighted attachment angle first increased and then decreased with increasing CTAB concentration.

SUBMITTER: Zhuo Q

PROVIDER: S-EPMC8014942 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Experimental Technique to Study the Interaction Between a Bubble and the Particle-Laden Interface.

Project description:An experimental apparatus was developed based on the Langmuir-Blodgett trough design to investigate the compression of monolayers of micron size spherical glass particles at the air-water interface and the interaction of an air bubble with the monolayers. The setup modifies the regular Langmuir-Blodgett trough by using a deep and clear glass cell. The cell allowed both the optical observation of the particle monolayer and the insertion of a capillary to produce a bubble under the layer of particles. Surface pressure-area (Π-A) isotherms were measured while the particles rearranged at the interface during compression and expansion for different pH values and particle wettability. We also analyzed the motion of particles in the monolayer by the surface pressure and packing factor to gain further insights into the behavior of particles during the coalescence process. The results suggested that the coalescence of a bubble was dependent on the formation of a defect in the particle layer and the defect size was both strongly influenced by particle hydrophobicity and the pH of the subphase.

| S-EPMC6102402 | biostudies-literature

Experimental investigation on the effect of blending bituminous coal with pinus sawdust on combustion performance parameters.

Project description:Combustion of bituminous coal and pinus sawdust blends was investigated experimentally within a drop tube furnace (DTF) with the aim of determining particle residence times and temperatures during the process. Evaluation of these parameters gives useful information to engineers who want to optimise the co-combustion process of coal and biomass blends. The DTF experimental approach was used to investigate fuel blends with a pinus sawdust mass substitution of 0, 10, 20, and 30% at different furnace temperatures of 1273, 1473 and 1673 K. Results showed that during stage 1 of the experimental setup which mimics devolatilisation, particle residence time at a distance of 520 mm from the injection point decreased from 0.8 to 0.7 s as blending by pinus sawdust increased from 0 to 30 %. During stage 2 of the experimental setup which mimics char combustion, particle residence time at a distance of 1320 mm from the injection point decreased from 3.9 to 2.0 s as blending by pinus sawdust increased from 0 to 30 %. The blending ratios under investigation demonstrated similar profiles of particle temperature at different furnace positions though further analysis showed that the highly blended samples required less time to attain high temperatures. By extension, since fuel blends with higher percentages of pinus sawdust were able to attain higher temperatures at shorter residence time, combustion intensity was deduced to increase with the blending ratio whilst stability decreased. As such, caution should be taken with materials used for furnace and burner design as high-temperature zones move backwards towards the injection point as blending increases.

| S-EPMC10958209 | biostudies-literature

Particle-Bubble Interactions: an Investigation of the Three-Phase Contact Line by Atomic Force Microscopy.

Project description:The dynamics of the three-phase contact line during particle-bubble interactions determine the stability of particle-bubble aggregates in flotation. The interaction of particles and sessile gas bubbles can be studied by colloidal probe atomic force microscopy (CP-AFM). This paper demonstrates a method to obtain the contact angle, the position of the three-phase contact line on the particle, and the bubble profile by utilizing the full information contained in AFM force-distance curves, i.e., force and CP-position information as well as the work done to move the three-phase contact line on the CP-particle. The proposed method does not require any assumption of a constant contact angle or a constant opening angle. This is achieved by the combined solution of the particle force balance and an expression for the work required to move the three-phase contact line over the colloid probe. The applicability to AFM force-distance measurements was demonstrated for the interaction of a hydrophobic SiO2 or a hydrophobic Al2O3 colloidal probe particle with sessile gas bubbles having radii between 45 and 80 μm.

| S-EPMC10537429 | biostudies-literature

Experimental investigation of performance differences between coherent Ising machines and a quantum annealer.

Project description:Physical annealing systems provide heuristic approaches to solving combinatorial optimization problems. Here, we benchmark two types of annealing machines-a quantum annealer built by D-Wave Systems and measurement-feedback coherent Ising machines (CIMs) based on optical parametric oscillators-on two problem classes, the Sherrington-Kirkpatrick (SK) model and MAX-CUT. The D-Wave quantum annealer outperforms the CIMs on MAX-CUT on cubic graphs. On denser problems, however, we observe an exponential penalty for the quantum annealer [exp(-αDW N 2)] relative to CIMs [exp(-αCIM N)] for fixed anneal times, both on the SK model and on 50% edge density MAX-CUT. This leads to a several orders of magnitude time-to-solution difference for instances with over 50 vertices. An optimal-annealing time analysis is also consistent with a substantial projected performance difference. The difference in performance between the sparsely connected D-Wave machine and the fully-connected CIMs provides strong experimental support for efforts to increase the connectivity of quantum annealers.

| S-EPMC6534389 | biostudies-literature

Experimental investigation of the creep damage evolution of coal rock around gas extraction boreholes at different water contents.

Project description:The creep process of the coal rock around the extraction boreholes under stress-water coupling is an important factor affecting the stability of the boreholes. To study the influence of the water content of perimeter of the coal rock around the boreholes on its creep damage, a creep intrinsic model considering water damage was established by introducing the plastic element model from the Nishihara model. To study the steady-state strain and damage evolution of coal rocks containing pores, and verify the practicality of the model, a graded loading water-bearing creep test was designed to explore the role of different water-bearing conditions in the creep process. The following conclusions were obtained: 1) water has a physical erosion and softening water wedge effect on the perimeter of the coal rock around the boreholes, which affects the loading axial strain and displacement of the perforated specimens; 2) an increase in water content reduces the time taken for perforated specimens to enter the creep phase, making the accelerated creep phase come earlier; 3) the parameters of the water damage model are considered to be exponentially related with the water content. The experimental data are similar to the results of the model parameters, and the model shows some practicality; 4) the damage variables in the accelerated creep phase increase rapidly throughout the creep process, leading to local instability in the borehole. The findings of the study provide important theoretical implications for the study of instability in gas extraction boreholes.

| S-EPMC9934311 | biostudies-literature

Biomineralization by particle attachment in early animals.

Project description:Crystallization by particle attachment (CPA) of amorphous precursors has been demonstrated in modern biomineralized skeletons across a broad phylogenetic range of animals. Precisely the same precursors, hydrated (ACC-H2O) and anhydrous calcium carbonate (ACC), have been observed spectromicroscopically in echinoderms, mollusks, and cnidarians, phyla drawn from the 3 major clades of eumetazoans. Scanning electron microscopy (SEM) here also shows evidence of CPA in tunicate chordates. This is surprising, as species in these clades have no common ancestor that formed a mineralized skeleton and appear to have evolved carbonate biomineralization independently millions of years after their late Neoproterozoic divergence. Here we correlate the occurrence of CPA from ACC precursor particles with nanoparticulate fabric and then use the latter to investigate the antiquity of the former. SEM images of early biominerals from Ediacaran and Cambrian shelly fossils show that these early calcifiers used attachment of ACC particles to form their biominerals. The convergent evolution of biomineral CPA may have been dictated by the same thermodynamics and kinetics as we observe today.

| S-EPMC6731633 | biostudies-literature

Precise micro-particle and bubble manipulation by tunable ultrasonic bottle beams.

Project description:This paper reports a method to generate tunable bottle beams using an ultrasonic lens, by which the bottle position can be precisely adjusted with the change of the acoustic frequency. Therefore, the position of a single particle or bubble in liquid can be manipulated without using phased array which is costly and huge with complex circuits. Furthermore, we introduced this method to multiple bubble manipulation using acoustic holography. The bottle properties against frequency are theoretically and experimentally analyzed. It is shown that the bottle position depends almost linearly on the operating frequency, which provides a basis for the precise manipulation of bubbles and particles. In addition, the relationship between the acoustic radiation force and the drag force under different incident acoustic pressures is considered, establishing a limit on the moving velocity of the trapped particles. The ultrasonic field observation is further demonstrated by Schlieren imaging system. The proposed method has potential biomedical applications, such as more flexible cell manipulation and targeted drug delivery in vivo, as well as potential applications in the study of chemical reactions between micro objects.

| S-EPMC8176366 | biostudies-literature

From particle attachment to space-filling coral skeletons.

Project description:Reef-building corals and their aragonite (CaCO3) skeletons support entire reef ecosystems, yet their formation mechanism is poorly understood. Here we used synchrotron spectromicroscopy to observe the nanoscale mineralogy of fresh, forming skeletons from six species spanning all reef-forming coral morphologies: Branching, encrusting, massive, and table. In all species, hydrated and anhydrous amorphous calcium carbonate nanoparticles were precursors for skeletal growth, as previously observed in a single species. The amorphous precursors here were observed in tissue, between tissue and skeleton, and at growth fronts of the skeleton, within a low-density nano- or microporous layer varying in thickness from 7 to 20 µm. Brunauer-Emmett-Teller measurements, however, indicated that the mature skeletons at the microscale were space-filling, comparable to single crystals of geologic aragonite. Nanoparticles alone can never fill space completely, thus ion-by-ion filling must be invoked to fill interstitial pores. Such ion-by-ion diffusion and attachment may occur from the supersaturated calcifying fluid known to exist in corals, or from a dense liquid precursor, observed in synthetic systems but never in biogenic ones. Concomitant particle attachment and ion-by-ion filling was previously observed in synthetic calcite rhombohedra, but never in aragonite pseudohexagonal prisms, synthetic or biogenic, as observed here. Models for biomineral growth, isotope incorporation, and coral skeletons' resilience to ocean warming and acidification must take into account the dual formation mechanism, including particle attachment and ion-by-ion space filling.

| S-EPMC7116453 | biostudies-literature

From particle attachment to space-filling coral skeletons.

| S-EPMC7720159 | biostudies-literature

Investigation on the Mass Distribution and Chemical Compositions of Various Ionic Liquids-Extracted Coal Fragments and Their Effects on the Electrochemical Performance of Coal-Derived Carbon Nanofibers (CCNFs).

Project description:Coal-derived carbon nanofibers (CCNFs) have been recently found to be a promising and low-cost electrode material for high-performance supercapacitors. However, the knowledge gap still exists between holistic understanding of coal precursors derived from different solvents and resulting CCNFs' properties, prohibiting further optimization of their electrochemical performance. In this paper, assisted by laser desorption/ionization (LDI) and gas chromatography-mass spectrometry (GC-MS) technologies, a systematic study was performed to holistically characterize mass distribution and chemical composition of coal precursors derived from various ionic liquids (ILs) as extractants. Sequentially, X-ray photoelectron spectroscopy (XPS) revealed that the differences in chemical properties of various coal products significantly affected the surface oxygen concentrations and certain species distributions on the CCNFs, which, in turn, determined the electrochemical performances of CCNFs as electrode materials. We report that the CCNF that was produced by an oxygen-rich coal fragment from C6mimCl ionic liquid extraction showed the highest concentrations of quinone and ester groups on the surface. Consequentially, C6mimCl-CCNF achieved the highest specific capacitance and lowest ion diffusion resistance. Finally, a symmetric carbon/carbon supercapacitor fabricated with such CCNF as electrode delivered an energy density of 21.1 Wh/kg at the power density of 0.6 kW/kg, which is comparable to commercial active carbon supercapacitors.

| S-EPMC8000264 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data