Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Low-temperature nucleation anomaly in silicate glasses shown to be artifact in a 5BaO·8SiO₂ glass.

ABSTRACT: For over 40 years, measurements of the nucleation rates in a large number of silicate glasses have indicated a breakdown in the Classical Nucleation Theory at temperatures below that of the peak nucleation rate. The data show that instead of steadily decreasing with decreasing temperature, the work of critical cluster formation enters a plateau and even starts to increase. Many explanations have been offered to explain this anomaly, but none have provided a satisfactory answer. We present an experimental approach to demonstrate explicitly for the example of a 5BaO ∙ 8SiO₂ glass that the anomaly is not a real phenomenon, but instead an artifact arising from an insufficient heating time at low temperatures. Heating times much longer than previously used at a temperature 50 K below the peak nucleation rate temperature give results that are consistent with the predictions of the Classical Nucleation Theory. These results raise the question of whether the claimed anomaly is also an artifact in other glasses.

SUBMITTER: Xia X

PROVIDER: S-EPMC8016887 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Low-temperature anomaly in disordered superconductors near B c2 as a vortex-glass property.

Project description:Strongly disordered superconductors in a magnetic field display many characteristic properties of type-II superconductivity-except at low temperatures, where an anomalous linear temperature dependence of the resistive critical field B c2 is routinely observed. This behavior violates the conventional theory of superconductivity, and its origin has posed a long-standing puzzle. Here we report systematic measurements of the critical magnetic field and current on amorphous indium oxide films with various levels of disorder. Surprisingly, our measurements show that the B c2 anomaly is accompanied by mean-field-like scaling of the critical current. Based on a comprehensive theoretical study we argue that these observations are a consequence of the vortex-glass ground state and its thermal fluctuations. Our theory further predicts that the linear-temperature anomaly occurs more generally in both films and disordered bulk superconductors, with a slope that depends on the normal-state sheet resistance, which we confirm experimentally.

| S-EPMC6314456 | biostudies-literature

Development of highly inhomogeneous temperature profile within electrically heated alkali silicate glasses.

Project description:According to Joule's well-known first law, application of electric field across a homogeneous solid should produce heat uniformly in proportion to the square of electrical current. Here we report strong departure from this expectation for common, homogeneous ionic solids such as alkali silicate glasses when subjected even to moderate fields (~100?V/cm). Unlike electronically conducting metals and semiconductors, with time the heating of ionically conducting glass becomes extremely inhomogeneous with the formation of a nanoscale alkali-depletion region, such that the glass melts near the anode, even evaporates, while remaining solid elsewhere. In situ infrared imaging shows and finite element analysis confirms localized temperatures more than thousand degrees above the remaining sample depending on whether the field is DC or AC. These observations unravel the origin of recently discovered electric field induced softening of glass. The observed highly inhomogeneous temperature profile point to the challenges for the application of Joule's law to the electrical performance of glassy thin films, nanoscale devices, and similarly-scaled phenomena.

| S-EPMC6391379 | biostudies-literature

Dynamics of self-reorganization explains passivation of silicate glasses.

Project description:Understanding the dissolution of silicate glasses and minerals from atomic to macroscopic levels is a challenge with major implications in geoscience and industry. One of the main uncertainties limiting the development of predictive models lies in the formation of an amorphous surface layer--called gel--that can in some circumstances control the reactivity of the buried interface. Here, we report experimental and simulation results deciphering the mechanisms by which the gel becomes passivating. The study conducted on a six-oxide borosilicate glass shows that gel reorganization involving high exchange rate of oxygen and low exchange rate of silicon is the key mechanism accounting for extremely low apparent water diffusivity (?10-21?m2?s-1), which could be rate-limiting for the overall reaction. These findings could be used to improve kinetic models, and inspire the development of new molecular sieve materials with tailored properties as well as highly durable glass for application in extreme environments.

| S-EPMC5986767 | biostudies-literature

Predictive modeling of Time-Temperature-Transformation diagram of metallic glasses based on atomistically-informed classical nucleation theory.

Project description:Theoretical prediction of glass forming ability (GFA) of metallic alloys is a key process in exploring metallic alloy compositions with excellent GFA and thus with the ability to form a large-sized bulk metallic glass. Molecular dynamics (MD) simulation is a promising tool to achieve a theoretical prediction. However, direct MD prediction continues to be challenging due to the time-scale limitation of MD. With respect to practical bulk metallic glass alloys, the time necessary for quenching at a typical cooling rate is five or more orders of magnitude higher than that at the MD time-scale. To overcome the time-scale issue, this study proposes a combined method of classical nucleation theory and MD simulations. The method actually allows to depict the time-temperature-transformation (TTT) diagram of the bulk metallic glass alloys. The TTT directly provides a prediction of the critical cooling rate and GFA. Although the method assumes conventional classical nucleation theory, all the material parameters appearing in the theory were determined by MD simulations using realistic interatomic potentials. The method is used to compute the TTT diagrams and critical cooling rates of two Cu-Zr alloy compositions (Cu50Zr50 and Cu20Zr80). The results indicate that the proposed method reasonably predicts the critical cooling rate based on the computed TTT.

| S-EPMC5543070 | biostudies-literature

Natural alteration of 6Li alumino-silicate glass.

Project description:Understanding the chemical durability of neutron shielding materials is necessary when assessing their long-term service potential. In this study, the chemical durability of a 6Li enriched neutron shielding glass that has been exposed to natural, near-operational conditions is assessed by Prompt Gamma Activation Analysis (PGAA) and Neutron Depth Profiling (NDP). These non-destructive, nuclear analysis techniques are sensitive to 6Li, and PGAA is uniquely able to detect H in low quantities in solids. It was determined that the enriched alumino-silicate glass can alter within 2 months of exposure to the natural environment. This exposure resulted in an average surface alteration layer thickness of ≈22 μm. The alteration layer contained ≈47% less 6Li than the bulk glass. Alternatively, a 3 years exposed sample of the glass had a surface alteration depth of ≈30 μm and 6Li depletion levels in the alteration layer were between 47% and 75% less 6Li than the bulk glass. When the alteration layer on the 3 years sample was removed, the H content of the glass's surface was nearly eliminated. This sample also showed variable Li concentrations throughout the alteration volume, which contrasts with near static Li concentration in the alteration volume of the 2 months sample. From these findings it was determined that the depletion in Li at the surface of the glass will not affect the glass's neutron shielding properties, but it may change the mechanical stability of the glass's surface and, due to increased H content in the alteration layer, make it an inappropriate material for the lining of certain neutron analysis instruments.

| S-EPMC6512992 | biostudies-literature

Boson peak, elasticity, and glass transition temperature in polymer glasses: Effects of the rigidity of chain bending.

Project description:The excess low-frequency vibrational spectrum, called boson peak, and non-affine elastic response are the most important particularities of glasses. Herein, the vibrational and mechanical properties of polymeric glasses are examined by using coarse-grained molecular dynamics simulations, with particular attention to the effects of the bending rigidity of the polymer chains. As the rigidity increases, the system undergoes a glass transition at a higher temperature (under a constant pressure), which decreases the density of the glass phase. The elastic moduli, which are controlled by the decrease of the density and the increase of the rigidity, show a non-monotonic dependence on the rigidity of the polymer chain that arises from the non-affine component. Moreover, a clear boson peak is observed in the vibrational density of states, which depends on the macroscopic shear modulus G. In particular, the boson peak frequency ωBP is proportional to [Formula: see text]. These results provide a positive correlation between the boson peak, shear elasticity, and the glass transition temperature.

| S-EPMC6925306 | biostudies-literature

Low-temperature 3D printing of transparent silica glass microstructures

Project description: Not available

| S-EPMC10550221 | biostudies-literature

Low melting oxide glasses prepared at a melt temperature of 500 °C.

Project description:Transparent low-melting inorganic glass is an attractive industrial material based on its high thermal and light resistance compared with conventional engineering plastics. If the melting temperature of inorganic glass could be decreased, the doping of guest materials or compression moulding on the glass surface would be easier. Although phosphate glass is considered as a potential candidate because of its transparency in the visible region and low-melting behaviour, water durability often becomes a problem for implementation. Here, we prepared inorganic low-melting phosphate glass at a temperature of 500 °C via a melting and quenching methodology. It was found that tin-doped phosphate glasses exhibited higher thermal and light resistance properties than polycarbonates. Colourless transparent oxide glasses without organic components are capable of bringing about new possibilities for the application of inorganic glasses.

| S-EPMC7794583 | biostudies-literature

Heterogeneous nucleation of protein crystals on fluorinated layered silicate.

Project description:Here, we describe an improved system for protein crystallization based on heterogeneous nucleation using fluorinated layered silicate. In addition, we also investigated the mechanism of nucleation on the silicate surface. Crystallization of lysozyme using silicates with different chemical compositions indicated that fluorosilicates promoted nucleation whereas the silicates without fluorine did not. The use of synthesized saponites for lysozyme crystallization confirmed that the substitution of hydroxyl groups contained in the lamellae structure for fluorine atoms is responsible for the nucleation-inducing property of the nucleant. Crystallization of twelve proteins with a wide range of pI values revealed that the nucleation promoting effect of the saponites tended to increase with increased substitution rate. Furthermore, the saponite with the highest fluorine content promoted nucleation in all the test proteins regardless of their overall net charge. Adsorption experiments of proteins on the saponites confirmed that the density of adsorbed molecules increased according to the substitution rate, thereby explaining the heterogeneous nucleation on the silicate surface.

| S-EPMC3144907 | biostudies-literature

Structure Dependence of Poisson's Ratio in Cesium Silicate and Borate Glasses.

Project description:In glass materials, Poisson's ratio (?) has been proposed to be correlated with a variety of features, including atomic packing density (Cg), liquid fragility (m), and network connectivity. To further investigate these correlations in oxide glasses, here, we study cesium borate and cesium silicate glasses with varying modifier/former ratio given the difference in network former coordination and because cesium results in relatively high ? compared to the smaller alkali modifiers. Within the binary glass series, we find positive correlations between ? on one hand and m and Cg on the other hand. The network former is found to greatly influence the correlation between ? and the number of bridging oxygens (nBO), with a negative correlation for silicate glasses and positive correlation for borate glasses. An analysis based on topological constraint theory shows that this difference cannot be explained by the effect of superstructural units on the network connectivity in lithium borate glasses. Considering a wider range of oxide glasses from the literature, we find that ? generally decreases with increasing network connectivity, but with notable exceptions for heavy alkali borate glasses and calcium alumino tectosilicate glasses.

| S-EPMC7345141 | biostudies-literature