Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Shape anisotropy-governed locomotion of surface microrollers on vessel-like microtopographies against physiological flows.

ABSTRACT: Surface microrollers are promising microrobotic systems for controlled navigation in the circulatory system thanks to their fast speeds and decreased flow velocities at the vessel walls. While surface propulsion on the vessel walls helps minimize the effect of strong fluidic forces, three-dimensional (3D) surface microtopography, comparable to the size scale of a microrobot, due to cellular morphology and organization emerges as a major challenge. Here, we show that microroller shape anisotropy determines the surface locomotion capability of microrollers on vessel-like 3D surface microtopographies against physiological flow conditions. The isotropic (single, 8.5 µm diameter spherical particle) and anisotropic (doublet, two 4 µm diameter spherical particle chain) magnetic microrollers generated similar translational velocities on flat surfaces, whereas the isotropic microrollers failed to translate on most of the 3D-printed vessel-like microtopographies. The computational fluid dynamics analyses revealed larger flow fields generated around isotropic microrollers causing larger resistive forces near the microtopographies, in comparison to anisotropic microrollers, and impairing their translation. The superior surface-rolling capability of the anisotropic doublet microrollers on microtopographical surfaces against the fluid flow was further validated in a vessel-on-a-chip system mimicking microvasculature. The findings reported here establish the design principles of surface microrollers for robust locomotion on vessel walls against physiological flows.

SUBMITTER: Bozuyuk U

PROVIDER: S-EPMC8020797 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Size effects in the magnetic anisotropy of embedded cobalt nanoparticles: from shape to surface.

Project description:Strong size-dependent variations of the magnetic anisotropy of embedded cobalt clusters are evidenced quantitatively by combining magnetic experiments and advanced data treatment. The obtained values are discussed in the frame of two theoretical models that demonstrate the decisive role of the shape in larger nanoparticles and the predominant role of the surface anisotropy in clusters below 3 nm diameter.

| S-EPMC4593963 | biostudies-literature

Surface-based analysis on shape and fractional anisotropy of white matter tracts in Alzheimer's disease.

Project description:BackgroundWhite matter disruption has been suggested as one of anatomical features associated with Alzheimer's disease (AD). Diffusion tensor imaging (DTI), which has been widely used in AD studies, obtains new insights into the white matter structure.MethodsWe introduced surface-based geometric models of the deep white matter tracts extracted from DTI, allowing the characterization of their shape variations relative to an atlas as well as fractional anisotropy (FA) variations on the atlas surface through large deformation diffeomorphic metric mapping (LDDMM). We applied it to assess local shapes and FA variations of twenty-three deep white matter tracts in 13 patients with AD and 19 healthy control subjects.ResultsOur results showed regionally-specific shape abnormalities and FA reduction in the cingulum tract and the sagittal stratum tract in AD, suggesting that disruption in the white matter tracts near the temporal lobe may represent the secondary consequence of the medial temporal lobe pathology in AD. Moreover, the regionally-specific patterns of FA and shape of the white matter tracts were shown to be of sufficient sensitivity to robustly differentiate patients with AD from healthy comparison controls when compared with the mean FA and volumes within the regions of the white matter tracts. Finally, greater FA or deformation abnormalities of the white matter tracts were associated with lower MMSE scores.ConclusionThe regionally-specific shape and FA patterns could be potential imaging markers for differentiating AD from normal aging.

| S-EPMC2842443 | biostudies-literature

Using Deep Learning to Forecast Maritime Vessel Flows.

Project description:Forecasting vessel flows is important to the development of intelligent transportation systems in the maritime field, as real-time and accurate traffic information has favorable potential in helping a maritime authority to alleviate congestion, mitigate emission of GHG (greenhouse gases) and enhance public safety, as well as assisting individual vessel users to plan better routes and reduce additional costs due to delays. In this paper, we propose three deep learning-based solutions to forecast the inflow and outflow of vessels within a given region, including a convolutional neural network (CNN), a long short-term memory (LSTM) network, and the integration of a bidirectional LSTM network with a CNN (BDLSTM-CNN). To apply those solutions, we first divide the given maritime region into M × N grids, then we forecast the inflow and outflow for all the grids. Experimental results based on the real AIS (Automatic Identification System) data of marine vessels in Singapore demonstrate that the three deep learning-based solutions significantly outperform the conventional method in terms of mean absolute error and root mean square error, with the performance of the BDLSTM-CNN-based hybrid solution being the best.

| S-EPMC7146195 | biostudies-literature

Shape matching algorithm to validate the tracing protocol of placental chorionic surface vessel networks.

Project description:Variability in placental chorionic surface vessel networks (PCSVNs) may mark developmental and functional changes in fetal health. Here we report a protocol of manually tracing PCSVNs from digital 2D images of post-delivery placentas and its validation by a shape matching method to compare the similarity between paint-injected and unmanipulated (uninjected and deflated vessels) tracings of PCSVNs. We show that tracings of unmanipulated vessels produce networks that are very comparable to the networks obtained by tracing paint-injected PCSVNs. We suggest that manual tracings of unmanipulated PCSVNs can extract features of PCSVN growth and structure that may impact fetal wellbeing.

| S-EPMC4550039 | biostudies-literature

Compact Shape Morphing Tensegrity Robots Capable of Locomotion.

Project description:Robustness, compactness, and portability of tensegrity robots make them suitable candidates for locomotion on unknown terrains. Despite these advantages, challenges remain relating to ease of fabrication, shape morphing (packing-unpacking), and locomotion capabilities. The paper introduces a design methodology for fabricating tensegrity robots of varying morphologies with modular components. The design methodology utilizes perforated links, coplanar (2D) alignment of components and individual cable tensioning to achieve a 3D tensegrity structure. These techniques are utilized to fabricate prism (three-link) tensegrity structures, followed by tensegrity robots in icosahedron (six-link), and shpericon (curved two-link) formation. The methodology is used to explore different robot morphologies that attempt to minimize structural complexity (number of elements) while facilitating smooth locomotion (impact between robot and surface). Locomotion strategies for such robots involve altering the position of center-of-mass (referred to as internal mass shifting) to induce "tip-over." As an example, a sphericon formation comprising of two orthogonally placed circular arcs with conincident center illustrates smooth locomotion along a line (one degree of freedom). The design of curved links of tensegrity mechanisms facilitates continuous change of the point of contact (along the curve) that results from the tip-over. This contrasts to the sudden and piece-wise continuous change for the case of robots with traditional straight links which generate impulse reaction forces during locomotion. The two resulting robots-the Icosahedron and the Sphericon Tensegrity Robots-display shape morphing (packing-unpacking) capabilities and achieve locomotion through internal mass-shifting. The presented static equilibrium analysis of sphericon with mass is the first step in the direction of dynamic locomotion control of these curved link robots.

| S-EPMC7805920 | biostudies-literature

Magnetocrystalline and Surface Anisotropy in CoFe2O4 Nanoparticles.

Project description:The effect of the annealing temperature Tann on the magnetic properties of cobalt ferrite nanoparticles embedded in an amorphous silica matrix (CoFe2O4/SiO2), synthesized by a sol-gel auto-combustion method, was investigated by magnetization and AC susceptibility measurements. For samples with 15% w/w nanoparticle concentration, the particle size increases from ~2.5 to ~7 nm, increasing Tann from 700 to 900 °C. The effective magnetic anisotropy constant (Keff) increases with decreasing Tann, due to the increase in the surface contribution. For a 5% w/w sample annealed at 900 °C, Keff is much larger (1.7 × 106 J/m3) than that of the 15% w/w sample (7.5 ×105 J/m3) annealed at 700 °C and showing comparable particle size. This indicates that the effect of the annealing temperature on the anisotropy is not only the control of the particle size but also on the core structure (i.e., cation distribution between the two spinel sublattices and degree of spin canting), strongly affecting the magnetocrystalline anisotropy. The results provide evidence that the magnetic anisotropy comes from a complex balance between core and surface contributions that can be controlled by thermal treatments.

| S-EPMC7408426 | biostudies-literature

Shape anisotropy revisited in single-digit nanometer magnetic tunnel junctions.

Project description:Nanoscale magnetic tunnel junctions play a pivotal role in magnetoresistive random access memories. Successful implementation depends on a simultaneous achievement of low switching current for the magnetization switching by spin transfer torque and high thermal stability, along with a continuous reduction of junction size. Perpendicular easy-axis CoFeB/MgO stacks possessing interfacial anisotropy have paved the way down to 20-nm scale, below which a new approach needs to be explored. Here we show magnetic tunnel junctions that satisfy the requirements at ultrafine scale by revisiting shape anisotropy, which is a classical part of magnetic anisotropy but has not been fully utilized in the current perpendicular systems. Magnetization switching solely driven by current is achieved for junctions smaller than 10?nm where sufficient thermal stability is provided by shape anisotropy without adopting new material systems. This work is expected to push forward the development of magnetic tunnel junctions toward single-digit nm-scale nano-magnetics/spintronics.

| S-EPMC5813113 | biostudies-literature

How particle shape affects granular segregation in industrial and geophysical flows.

Project description:Industrial and environmental granular flows commonly exhibit a phenomenon known as "granular segregation," in which grains separate according to physical characteristics (size, shape, density), interfering with industrial applications (cement mixing, medicine, and food production) and fundamentally altering the behavior of geophysical flows (landslides, debris flows, pyroclastic flows, riverbeds). While size-induced segregation has been well studied, the role of grain shape has not. Here we conduct numerical experiments to investigate how grain shape affects granular segregation in dry and wet flows. To isolate the former, we compare dry, bidisperse mixtures of spheres alone with mixtures of spheres and cubes in a rotating drum. Results show that while segregation level generally increases with particle size ratio, the presence of cubes decreases segregation levels compared to cases with only spheres. Further, we find differences in the segregation level depending on which shape makes up each size class, reflecting differences in mobility when smaller grains are cubic or spherical. We find similar dynamics in simulations of a shear-driven coupled fluid-granular flow (e.g., a simulated riverbed), demonstrating that this phenomenon is not unique to rotating drums; however, in contrast to the dry system, we find that the segregation level increases in the presence of cubic grains, and fluid drag effects can qualitatively change segregation trends. Our findings demonstrate competing shape-induced segregation patterns in wet and dry flows that are independent from grain size controls, with implications for many industrial and geophysical processes.

| S-EPMC10861863 | biostudies-literature

A contact line pinning based microfluidic platform for modelling physiological flows.

Project description:This work introduces a contact line pinning based microfluidic platform for the generation of interstitial and intramural flows within a three dimensional (3D) microenvironment for cellular behaviour studies. A contact line pinning method was used to confine a natively derived biomatrix, collagen, in microfluidic channels without walls. By patterning collagen in designated wall-less channels, we demonstrated and validated the intramural flows through a microfluidic channel bounded by a monolayer of endothelial cells (mimic of a vascular vessel), as well as slow interstitial flows within a cell laden collagen matrix using the same microfluidic platform. The contact line pinning method ensured the generation of an engineered endothelial tube with straight walls, and spatially uniform interstitial fluid flows through the cell embedded 3D collagen matrix. Using this device, we demonstrated that the breast tumour cells' (MDA-MB-231 cell line) morphology and motility were modulated by the interstitial flows, and the motility of a sub-population of the cells was enhanced by the presence of the flow. The presented microfluidic platform provides a basic framework for studies of cellular behaviour including cell transmigration, growth, and adhesion under well controlled interstitial and intramural flows, and within a physiologically realistic 3D co-culture setting.

| S-EPMC4505921 | biostudies-literature

Enhanced Locomotion Efficiency of a Bio-inspired Walking Robot using Contact Surfaces with Frictional Anisotropy.

Project description:Based on the principles of morphological computation, we propose a novel approach that exploits the interaction between a passive anisotropic scale-like material (e.g., shark skin) and a non-smooth substrate to enhance locomotion efficiency of a robot walking on inclines. Real robot experiments show that passive tribologically-enhanced surfaces of the robot belly or foot allow the robot to grip on specific surfaces and move effectively with reduced energy consumption. Supplementing the robot experiments, we investigated tribological properties of the shark skin as well as its mechanical stability. It shows high frictional anisotropy due to an array of sloped denticles. The orientation of the denticles to the underlying collagenous material also strongly influences their mechanical interlocking with the substrate. This study not only opens up a new way of achieving energy-efficient legged robot locomotion but also provides a better understanding of the functionalities and mechanical properties of anisotropic surfaces. That understanding will assist developing new types of material for other real-world applications.

| S-EPMC5180203 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data