Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Foldable Perovskite Solar Cells Using Carbon Nanotube-Embedded Ultrathin Polyimide Conductor.

ABSTRACT: Recently, foldable electronics technology has become the focus of both academic and industrial research. The foldable device technology is distinct from flexible technology, as foldable devices have to withstand severe mechanical stresses such as those caused by an extremely small bending radius of 0.5 mm. To realize foldable devices, transparent conductors must exhibit outstanding mechanical resilience, for which they must be micrometer-thin, and the conducting material must be embedded into a substrate. Here, single-walled carbon nanotubes (CNTs)-polyimide (PI) composite film with a thickness of 7 µm is synthesized and used as a foldable transparent conductor in perovskite solar cells (PSCs). During the high-temperature curing of the CNTs-embedded PI conductor, the CNTs are stably and strongly p-doped using MoO _x , resulting in enhanced conductivity and hole transportability. The ultrathin foldable transparent conductor exhibits a sheet resistance of 82 Ω sq.^-1 and transmittance of 80% at 700 nm, with a maximum-power-point-tracking-output of 15.2% when made into a foldable solar cell. The foldable solar cells can withstand more than 10 000 folding cycles with a folding radius of 0.5 mm. Such mechanically resilient PSCs are unprecedented; further, they exhibit the best performance among the carbon-nanotube-transparent-electrode-based flexible solar cells.

SUBMITTER: Yoon J

PROVIDER: S-EPMC8025023 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High-performance hole conductor-free perovskite solar cell using a carbon nanotube counter electrode.

Project description:Carbon-based perovskite solar cells (C-PSCs) are the most promising photovoltaic (PV) due to their low material and manufacturing cost and superior long-term stability. This work compares the performance between gold (Au) and multi-wall carbon nanotube (MWCNT) electrodes for hole transport material (HTM)-free PSCs. Based on the obtained results, C-PSCs showed remarkable power conversion efficiency (PCE) and negligible hysteresis. Indeed, under optimized conditions, MWCNTs demonstrated superior performance as a counter electrode (CE) for HTM-free PSCs, leading to a PCE of 15.56%, which is comparable to the current state-of-the-art materials. Also, the presence of MWCNTs in the cell architecture enhances the collection and injection of holes at the perovskite/MWCNT interface and as a result, improves the external quantum efficiency (EQE) and current density because the recombination process is quenched. This improvement is confirmed by impedance spectroscopy (EIS), photoluminescence (PL), current/voltage (J-V), and EQE measurements. Moreover, MWCNTs could act as a protective layer and enhance the PSC stability. C-PSC was more stable than that of traditional PSC based on Au, which could maintain 80% of its primary PCE for long-periods of storage in moist conditions.

| S-EPMC9056886 | biostudies-literature

Multi-Walled Carbon Nanotube-Assisted Encapsulation Approach for Stable Perovskite Solar Cells.

Project description:Perovskite solar cells (PSCs) are regarded as the next-generation thin-film energy harvester, owing to their high performance. However, there is a lack of studies on their encapsulation technology, which is critical for resolving their shortcomings, such as their degradation by oxygen and moisture. It is determined that the moisture intrusion and the heat trapped within the encapsulating cover glass of PSCs influenced the operating stability of the devices. Therefore, we improved the moisture and oxygen barrier ability and heat releasing capability in the passivation of PSCs by adding multi-walled carbon nanotubes to the epoxy resin used for encapsulation. The 0.5 wt% of carbon nanotube-added resin-based encapsulated PSCs exhibited a more stable operation with a ca. 30% efficiency decrease compared to the ca. 63% decrease in the reference devices over one week under continuous operation. Specifically, the short-circuit current density and the fill factor, which are affected by moisture and oxygen-driven degradation, as well as the open-circuit voltage, which is affected by thermal damage, were higher for the multi-walled carbon nanotube-added encapsulated devices than the control devices, after the stability test.

| S-EPMC8399998 | biostudies-literature

Highly flexible, foldable, and rollable microsupercapacitors on an ultrathin polyimide substrate with high power density.

Project description:The design and functionality of extremely flexible, foldable, and rollable microsupercapacitors (MSCs) with in-plane interdigital electrodes that consist of single-walled carbon nanotube (SWCNT) networks on an ultrathin polyimide substrate are demonstrated through experiments and finite element simulations. The all-solid-state MSCs can be reversibly bent, folded, and rolled purely elastically without degradation of their electrical performance. The simulation results confirm that the deformation in bent, folded, and rolled MSCs is purely elastic. The high power density (1125 W cm-3) and small time constant (1 ms) of the present MSCs are comparable to those of aluminum electrolytic capacitors. The MSCs operate at scan rates of up to 1000 V s-1, are characterized by a volumetric capacitance of 18 F cm-3 and an energy density of 1.6 mWh cm-3, and exhibit superior electrochemical stability with 96% capacity retention even after 100,000 charge/discharge cycles. The developed MSCs demonstrate high potential for integration in flexible and wearable electronic systems.

| S-EPMC6220169 | biostudies-literature

Ultrathin Hole Extraction Layer for Efficient Inverted Perovskite Solar Cells.

Project description:Inverted perovskite solar cells (PSCs) incorporating poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT) as the hole transport/extraction layer have been broadly investigated in recent years. However, most PSCs which incorporate PEDOT as the hole transport layer (HTL) suffer from lower device performance stemming from reduced photocurrent and low open-circuit voltage around 0.95 V. Here, we report an ultrathin PEDOT layer as the HTL for efficient inverted structure PSCs. The transparency, conductivity, and resulting film morphology were studied and compared with traditional architectures and thicker PEDOT layers. The PSC device incorporating an ultrathin PEDOT layer shows significant improvement in short-circuit current density (J SC), open-circuit voltage (V OC), and power conversion efficiency. Because ultrathin PEDOT layers can be easily obtained by dilution, this study suggests a simple way to improve the PSC performance and provide a route to further reduce the fabrication complexity and cost of PSCs.

| S-EPMC6644352 | biostudies-literature

Electrodeposited Ultrathin TiO2 Blocking Layers for Efficient Perovskite Solar Cells.

Project description:In this study, the electrodeposition (ED) of ultrathin, compact TiO2 blocking layers (BLs) on fluorine-doped tin oxide (FTO) glass for perovskite solar cells (PSCs) is evaluated. This bottom-up method allows for controlling the morphology and thickness of TiO2 films by simply manipulating deposition conditions. Compared with BLs produced using the spin-coating (SC) method, BLs produced using ED exhibit satisfactory surface coverage, even with a film thickness of 29?nm. Evidence from cyclic voltammetry shows that an ED BL suppresses interfacial recombination more profoundly than an SC BL does, consequently improving the photovoltaic properties of the PSC significantly. A PSC equipped with an ED TiO2 BL having a 13.6% power conversion efficiency is demonstrated.

| S-EPMC4630649 | biostudies-literature

Electrical Resistance Sensing of Epoxy Curing Using an Embedded Carbon Nanotube Yarn.

Project description:Curing effects were investigated by using the electrical response of a single carbon nanotube yarn (CNTY) embedded in an epoxy resin during the polymerization process. Two epoxy resins of different viscosities and curing temperatures were investigated, varying also the concentration of the curing agent. It is shown that the kinetics of resin curing can be followed by using the electrical response of an individual CNTY embedded in the resin. The electrical resistance of an embedded CNTY increased (~ 9%) after resin curing for an epoxy resin cured at 130 °C with viscosity of ~ 59 cP at the pouring/curing temperature ("Epon 862"), while it decreased (~ -9%) for a different epoxy cured at 60 °C, whose viscosity is about double at the corresponding curing temperature. Lowering the curing temperature from 60 °C to room temperature caused slower and smoother changes of electrical resistance over time and smaller (positive) residual resistance. Increasing the concentration of the curing agent caused a faster curing kinetics and, consequently, more abrupt changes of electrical resistance over time, with negative residual electrical resistance. Therefore, the resin viscosity and curing kinetics play a paramount role in the CNTY wicking, wetting and resin infiltration processes, which ultimately govern the electrical response of the CNTY immersed into epoxy.

| S-EPMC7309011 | biostudies-literature

High-efficiency robust perovskite solar cells on ultrathin flexible substrates.

Project description:Wide applications of personal consumer electronics have triggered tremendous need for portable power sources featuring light-weight and mechanical flexibility. Perovskite solar cells offer a compelling combination of low-cost and high device performance. Here we demonstrate high-performance planar heterojunction perovskite solar cells constructed on highly flexible and ultrathin silver-mesh/conducting polymer substrates. The device performance is comparable to that of their counterparts on rigid glass/indium tin oxide substrates, reaching a power conversion efficiency of 14.0%, while the specific power (the ratio of power to device weight) reaches 1.96?kW?kg(-1), given the fact that the device is constructed on a 57-?m-thick polyethylene terephthalate based substrate. The flexible device also demonstrates excellent robustness against mechanical deformation, retaining >95% of its original efficiency after 5,000 times fully bending. Our results confirmed that perovskite thin films are fully compatible with our flexible substrates, and are thus promising for future applications in flexible and bendable solar cells.

| S-EPMC4729901 | biostudies-other

Flexible Perovskite Solar Cells via Surface-Confined Silver Nanoparticles on Transparent Polyimide Substrates.

Project description:We report about a flexible substrate incorporating surface-confined silver nanoparticles on transparent polyimide (PI). The incorporated silver nanoparticles (Ag NPs), which possessed excellent adhesive strength with the PI substrate, induced localized surface plasmon resonance and light scattering effects by changing the particle size and interparticle distance to promote light harvesting in the perovskite solar cells. Moreover, the reduced sheet resistance was beneficial for the charge extraction and transportation in the devices when high-conductivity poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS, PH1000) was deposited on the Ag NP-confined PI serving as a flexible bottom electrode. A power conversion efficiency of 10.41% was obtained for the flexible perovskite solar cells based on a Ag NP-confined PI substrate (the particle size of the Ag NPs was 25 nm mixed with 40 nm), which was obviously enhanced in all parameters. Especially, a 61% improvement existed in the short-circuit current density compared to that based on the bare PI substrates. It indicates that the substrate would be a promising candidate for the development of flexible electronics.

| S-EPMC6473467 | biostudies-literature

Highly Efficient Colored Perovskite Solar Cells Integrated with Ultrathin Subwavelength Plasmonic Nanoresonators.

Project description:Highly efficient colored perovskite solar cells that exploit localized surface plasmon resonances in ultrathin subwavelength plasmonic nanoresonators are demonstrated. Localized resonances in ultrathin metal nano-strip optical resonators consisting of an array of metallic subwavelength nanowires on a transparent substrate, fabricated by using low-cost nanoimprint lithography over a large area, lead to a sharp peak in a reflection spectrum for distinctive color generation with angle-insensitive property up to 60°, and simultaneously transmit the complementary spectrum of visible light that can be efficiently harvested by the perovskite solar cells for electric power generation. The plasmonic color filter-integrated perovskite solar cells provide 10.12%, 8.17% and 7.72% of power conversion efficiencies with capabilities of creating vivid reflective red, green and blue colors. The scheme described in this work could be applied to a variety of applications such as power-generating decorations, tandem cells, power-saving wearable devices and energy-efficient reflective display technologies.

| S-EPMC5587539 | biostudies-literature

Low thermal conductivity in ultrathin carbon nanotube (2, 1).

Project description:Molecular dynamic simulations reveal that the ultrathin carbon nanotube (CNT) (2, 1) with a reconstructed structure exhibits a surprisingly low thermal conductivity, which is only ~16-30% of those in regular CNTs, e.g. CNT (2, 2) and (5, 5). Detailed lattice dynamic calculations suggest that the acoustic phonon modes greatly soften in CNT (2, 1) as compared to regular CNTs. Moreover, both phonon group velocities and phonon lifetimes strikingly decrease in CNT (2, 1), which result in the remarkable reduction of thermal conductivity. Besides, isotope doping and chemical functionalization enable the further reduction of thermal conductivity in CNT (2, 1).

| S-EPMC4017211 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data