Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Large scale synthesis of copper nickel alloy nanoparticles with reduced compressibility using arc thermal plasma process.

ABSTRACT: Among the various methods employed in the synthesis of nanostructures, those involving high operating temperature and sharp thermal gradients often lead to the establishment of new exotic properties. Herein, we report on the formation of Cu-Ni metallic alloy nanoparticles with greatly enhanced stiffness achieved through direct-current transferred arc-thermal plasma assisted vapour-phase condensation. High pressure synchrotron X-ray powder diffraction (XRPD) at ambient temperature as well as XRPD in the temperature range 180 to 920 K, show that the thermal arc-plasma route resulted in alloy nanoparticles with much enhanced bulk modulus compared to their bulk counterparts. Such a behaviour may find an explanation in the sudden quenching assisted by the retention of a large amount of local strain due to alloying, combined with the perfect miscibility of the elemental components during the thermal plasma synthesis process.

SUBMITTER: Das SK

PROVIDER: S-EPMC8026964 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ternary nickel-tungsten-copper alloy rivals platinum for catalyzing alkaline hydrogen oxidation.

Project description:Operating fuel cells in alkaline environments permits the use of platinum-group-metal-free (PGM-free) catalysts and inexpensive bipolar plates, leading to significant cost reduction. Of the PGM-free catalysts explored, however, only a few nickel-based materials are active for catalyzing the hydrogen oxidation reaction (HOR) in alkali; moreover, these catalysts deactivate rapidly at high anode potentials owing to nickel hydroxide formation. Here we describe that a nickel-tungsten-copper (Ni5.2WCu2.2) ternary alloy showing HOR activity rivals Pt/C benchmark in alkaline electrolyte. Importantly, we achieved a high anode potential up to 0.3 V versus reversible hydrogen electrode on this catalyst with good operational stability over 20 h. The catalyst also displays excellent CO-tolerant ability that Pt/C catalyst lacks. Experimental and theoretical studies uncover that nickel, tungsten, and copper play in synergy to create a favorable alloying surface for optimized hydrogen and hydroxyl bindings, as well as for the improved oxidation resistance, which result in the HOR enhancement.

| S-EPMC8113563 | biostudies-literature

Synthesis of Uniformly Sized Bi0.5Sb1.5Te3.0 Nanoparticles via Mechanochemical Process and Wet-Milling for Reduced Thermal Conductivity.

Project description:In this study, Bi0.5Sb1.5Te3.0 (BST) nanoparticles (NPs) with high crystallinities were synthesized via a mechanochemical process (MCP). X-ray diffraction (XRD), and Raman and X-ray photoelectron spectroscopy (XPS) spectra of the BST NPs showed that the Bi, Sb, and Te powders successfully formed BiSbTe phase and transmission electron microscopy (TEM) images, verifying the high crystallinity and smaller size, albeit agglomerated. The as-synthesized BST NPs with agglomerated clusters were ground into smaller sizes of approximately 41.8 nm with uniform distribution through a simple wet-milling process during 7 days. The thermal conduction behaviors of bulk alloys fabricated by spark plasma sintering (SPS) of the BST NPs were studied by comparing those of samples fabricated from as-synthesized BST NPs and a BST ingot. The thermal conductivities (κ) of the BST nanocomposites were significantly reduced by introducing BST NPs with smaller grain sizes and finer distributions in the temperature range from 300 to 500 K. The BST nanocomposites fabricated from wet-milled BST NPs offered ultralow κ values of 0.84 W m-1 K-1 at approximately 398 K.

| S-EPMC7865327 | biostudies-literature

Electromagnetic Shielding Performance of Different Metallic Coatings Deposited by Arc Thermal Spray Process.

Project description:Advancement in electronic and communication technologies bring us up to date, but it causes electromagnetic interference (EMI) resulting in failure of building and infrastructure, hospital, military base, nuclear plant, and sensitive electronics. Therefore, it is of the utmost importance to prevent the failure of structures and electronic components from EMI using conducting coating. In the present study, Cu, Cu-Zn, and Cu-Ni coating was deposited in different thicknesses and their morphology, composition, conductivity, and EMI shielding effectiveness are assessed. The scanning electron microscopy (SEM) results show that 100 µm coating possesses severe defects and porosity but once the thickness is increased to 500 µm, the porosity and electrical conductivity is gradually decreased and increased, respectively. Cu-Zn coating exhibited lowest in porosity, dense, and compact morphology. As the thickness of coating is increased, the EMI shielding effectiveness is increased. Moreover, 100 µm Cu-Zn coating shows 80 dB EMI shielding effectiveness at 1 GHz but Cu and Cu-Ni are found to be 68 and 12 dB, respectively. EMI shielding effectiveness results reveal that 100 µm Cu-Zn coating satisfy the minimum requirement for EMI shielding while Cu and Cu-Ni required higher thickness.

| S-EPMC7767199 | biostudies-literature

Accelerated rates of large-scale mutations in the presence of copper and nickel.

Project description:Mutation rate variation has been under intense investigation for decades. Despite these efforts, little is known about the extent to which environmental stressors accelerate mutation rates and influence the genetic load of populations. Moreover, most studies on stressors have focused on unicellular organisms and point mutations rather than large-scale deletions and duplications (copy number variations [CNVs]). We estimated mutation rates in Daphnia pulex exposed to low levels of environmental stressors as well as the effect of selection on de novo mutations. We conducted a mutation accumulation (MA) experiment in which selection was minimized, coupled with an experiment in which a population was propagated under competitive conditions in a benign environment. After an average of 103 generations of MA propagation, we sequenced 60 genomes and found significantly accelerated rates of deletions and duplications in MA lines exposed to ecologically relevant concentrations of metals. Whereas control lines had gene deletion and duplication rates comparable to other multicellular eukaryotes (1.8 × 10-6 per gene per generation), the presence of nickel and copper increased these rates fourfold. The realized mutation rate under selection was reduced to 0.4× that of control MA lines, providing evidence that CNVs contribute to mutational load. Our CNV breakpoint analysis revealed that nonhomologous recombination associated with regions of DNA fragility is the primary source of CNVs, plausibly linking metal-induced DNA strand breaks with higher CNV rates. Our findings suggest that environmental stress, in particular multiple stressors, can have profound effects on large-scale mutation rates and mutational load of multicellular organisms.

| S-EPMC6314161 | biostudies-literature

Composition tunable cobalt-nickel and cobalt-iron alloy nanoparticles below 10 nm synthesized using acetonated cobalt carbonyl.

Project description:A general organometallic route has been developed to synthesize Co(x)Ni(1-x) and Co(x)Fe(1-x) alloy nanoparticles with a fully tunable composition and a size of 4-10 nm with high yield. In contrast to previously reported synthesis methods using dicobalt octacarbonyl (Co(2)(CO)(8)), here the cobalt-cobalt bond in the carbonyl complex is first broken with anhydrous acetone. The acetonated compound, in the presence of iron carbonyl or nickel acetylacetonate, is necessary to obtain small composition tunable alloys. This new route and insights will provide guidelines for the wet-chemical synthesis of yet unmade bimetallic alloy nanoparticles. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11051-012-0991-5) contains supplementary material, which is available to authorized users.

| S-EPMC3422617 | biostudies-literature

Composites of Palladium-Nickel Alloy Nanoparticles and Graphene Oxide for the Knoevenagel Condensation of Aldehydes with Malononitrile.

Project description:Herein, we have described uniformly dispersed palladium-nickel nanoparticles furnished on graphene oxide (GO-supported PdNi nanoparticles) as a powerful heterogeneous nanocatalyst for the promotion of Knoevenagel reaction between malononitrile and aromatic aldehydes under mild reaction conditions. The successful characterization of PdNi nanoparticles on the GO surface was shown by X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy (HR-TEM), and TEM. GO-supported PdNi nanoparticles, which are used as highly efficient, stable, and durable catalysts, were used for the first time for the Knoevenagel condensation reaction. The data obtained here showed that the GO-supported PdNi nanocatalyst had a unique catalytic activity and demonstrated that it could be reused five times without a significant decrease in the catalytic performance. The use of this nanocatalyst results in a very short reaction time under mild reaction conditions, high recyclability, excellent catalytic activity, and a straightforward work-up procedure for Knoevenagel condensation of malononitrile and aromatic aldehydes.

| S-EPMC6648930 | biostudies-literature

Preparation of Nickel Nanoparticles by Direct Current Arc Discharge Method and Their Catalytic Application in Hybrid Na-Air Battery.

Project description:Nickel nanoparticles were prepared by the arc discharge method. Argon and argon/hydrogen mixtures were used as plasma gas; the evaporation of anode material chiefly resulted in the formation of different arc-anode attachments at different hydrogen concentrations. The concentration of hydrogen was fixed at 0, 30, and 50 vol% in argon arc, corresponding to diffuse, multiple, and constricted arc-anode attachments, respectively, which were observed by using a high-speed camera. The images of the cathode and anode jets were observed with a suitable band-pass filter. The relationship between the area change of the cathode/anode jet and the synchronous voltage/current waveform was studied. By investigating diverse arc-anode attachments, the effect of hydrogen concentration on the features of nickel nanoparticles were investigated, finding that 50 vol% H? concentration has high productivity, fine crystallinity, and appropriate size distribution. The synthesized nickel nanoparticles were then used as catalysts in a hybrid sodium?air battery. Compared with commercial a silver nanoparticle catalyst and carbon black, nickel nanoparticles have better electrocatalytic performance. The promising electrocatalytic activity of nickel nanoparticles can be ascribed to their good crystallinity, effective activation sites, and Ni/NiO composite structures. Nickel nanoparticles prepared by the direct current (DC) arc discharge method have the potential to be applied as catalysts on a large scale.

| S-EPMC6165376 | biostudies-literature

Effect of Water Nutrient Pollution on Long-Term Corrosion of 90:10 Copper Nickel Alloy.

Project description:Due to their good corrosion resistance, copper and copper alloys such as 90:10 Cu-Ni are used extensively in high-quality marine and industrial piping systems and also in marine, urban, and industrial environments. Their corrosion loss and pitting behaviour tends to follow a bi-modal trend rather than the classic power law. Field data for 90:10 copper nickel immersed in natural seawater are used to explore the effect of water pollution and in particular the availability of critical nutrients for microbiologically induced corrosion. It is shown, qualitatively, that increased dissolved inorganic nitrogen increases corrosion predominantly in the second, long-term, mode of the model. Other, less pronounced, influences are salinity and dissolved oxygen concentration.

| S-EPMC5458850 | biostudies-other

High-Pressure Behavior of Nickel Sulfate Monohydrate: Isothermal Compressibility, Structural Polymorphism, and Transition Pathway.

Project description:Single crystals of synthetic nickel sulfate monohydrate, ?-NiSO4·H2O (space-group symmetry C2/c at ambient conditions), were subject to high-pressure behavior investigations in a diamond-anvil cell up to 10.8 GPa. By means of subtle spectral changes in Raman spectra recorded at 298 K on isothermal compression, two discontinuities were identified at 2.47(1) and 6.5(5) GPa. Both transitions turn out to be apparently second order in character, as deduced from the continuous evolution of unit-cell volumes determined from single-crystal X-ray diffraction. The first structural transition from ?- to ?-NiSO4·H2O is an obvious ferroelastic C2/c-P1? transition. It is purely displacive from a structural point of view, accompanied by symmetry changes in the hydrogen-bonding scheme. The second ?- to ?-NiSO4·H2O transition, further splitting the O2 (hydrogen bridge acceptor) position and violating the P1? space-group symmetry, is also evident from the splitting of individual bands in the Raman spectra. It can be attributed to symmetry reduction through local violation of local centrosymmetry. Lattice elasticities were obtained by fitting second-order Birch-Murnaghan equations of state to the p-V data points yielding the following zero-pressure bulk moduli values: K0 = 63.4 ± 1.0 GPa for ?-NiSO4·H2O, K0 = 61.3 ± 1.9 GPa for ?-NiSO4·H2O, and K0 = 68.8 ± 2.5 GPa for ?-NiSO4·H2O.

| S-EPMC7201398 | biostudies-literature

Development of highly faceted reduced graphene oxide-coated copper oxide and copper nanoparticles on a copper foil surface.

Project description:This work describes the formation of reduced graphene oxide-coated copper oxide and copper nanoparticles (rGO-Cu2ONPs, rGO-CuNPs) on the surface of a copper foil supporting graphene oxide (GO) at annealing temperatures of 200-1000 °C, under an Ar atmosphere. These hybrid nanostructures were developed from bare copper oxide nanoparticles which grew at an annealing temperature of 80 °C under nitrogen flux. The predominant phase as well as the particle size and shape strongly depend on the process temperature. Characterization with transmission electron microscopy and scanning electron microscopy indicates that Cu or Cu2O nanoparticles take rGO sheets from the rGO network to form core-shell Cu-rGO or Cu2O-rGO nanostructures. It is noted that such ones increase in size from 5 to 800 nm as the annealing temperature increases in the 200-1000 °C range. At 1000 °C, Cu nanoparticles develop a highly faceted morphology, displaying arm-like carbon nanorods that originate from different facets of the copper crystal structure.

| S-EPMC4979746 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data