Classification of Rice Yield Using UAV-Based Hyperspectral Imagery and Lodging Feature
Ontology highlight
ABSTRACT:
SUBMITTER: Wang J
PROVIDER: S-EPMC8028843 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Plant lodging is one of the most essential phenotypes for soybean breeding programs. Soybean lodging is conventionally evaluated visually by breeders, which is time-consuming and subject to human errors. This study aimed to investigate the potential of unmanned aerial vehicle (UAV)-based imagery and machine learning in assessing the lodging conditions of soybean breeding lines. A UAV imaging system equipped with an RGB (red-green-blue) camera was used to collect the imagery data of 1266 four-row plots in a soybean breeding field at the reproductive stage. Soybean lodging scores were visually assessed by experienced breeders, and the scores were grouped into four classes, i.e., non-lodging, moderate lodging, high lodging, and severe lodging. UAV images were stitched to build orthomosaics, and soybean plots were segmented using a grid method. Twelve image features were extracted from the collected images to assess the lodging scores of each breeding line. Four models, i.e., extreme gradient boosting (XGBoost), random forest (RF), K-nearest neighbor (KNN) and artificial neural network (ANN), were evaluated to classify soybean lodging classes. Five data preprocessing methods were used to treat the imbalanced dataset to improve classification accuracy. Results indicate that the preprocessing method SMOTE-ENN consistently performs well for all four (XGBoost, RF, KNN, and ANN) classifiers, achieving the highest overall accuracy (OA), lowest misclassification, higher F1-score, and higher Kappa coefficient. This suggests that Synthetic Minority Oversampling-Edited Nearest Neighbor (SMOTE-ENN) may be a good preprocessing method for using unbalanced datasets and the classification task. Furthermore, an overall accuracy of 96% was obtained using the SMOTE-ENN dataset and ANN classifier. The study indicated that an imagery-based classification model could be implemented in a breeding program to differentiate soybean lodging phenotype and classify lodging scores effectively.
| S-EPMC10458648 | biostudies-literature
Project description:It is generally feasible to classify different species of vegetation based on remotely sensed images, but identification of different sub-species or even cultivars is uncommon. Tea trees (Camellia sinensis L.) have been proven to show great differences in taste and quality between cultivars. We hypothesize that hyperspectral remote sensing would make it possibly to classify cultivars of plants and even to estimate their taste-related biochemical components. In this study, hyperspectral data of the canopies of tea trees were collected by hyperspectral camera mounted on an unmanned aerial vehicle (UAV). Tea cultivars were classified according to the spectral characteristics of the tea canopies. Furthermore, two major components influencing the taste of tea, tea polyphenols (TP) and amino acids (AA), were predicted. The results showed that the overall accuracy of tea cultivar classification achieved by support vector machine is higher than 95% with proper spectral pre-processing method. The best results to predict the TP and AA were achieved by partial least squares regression with standard normal variant normalized spectra, and the ratio of TP to AA-which is one proven index for tea taste-achieved the highest accuracy (RCV = 0.66, RMSECV = 13.27) followed by AA (RCV = 0.62, RMSECV = 1.16) and TP (RCV = 0.58, RMSECV = 10.01). The results indicated that classification of tea cultivars using the hyperspectral remote sensing from UAV was successful, and there is a potential to map the taste-related chemical components in tea plantations from UAV platform; however, further exploration is needed to increase the accuracy.
| S-EPMC5978401 | biostudies-literature
Project description:Plant nitrogen concentration (PNC) is a critical indicator of N status for crops, and can be used for N nutrition diagnosis and management. This work aims to explore the potential of multispectral imagery from unmanned aerial vehicle (UAV) for PNC estimation and improve the estimation accuracy with hyperspectral data collected in the field with a hyperspectral radiometer. In this study we combined selected vegetation indices (VIs) and texture information to estimate PNC in rice. The VIs were calculated from ground and aerial platforms and the texture information was obtained from UAV-based multispectral imagery. Two consecutive years (2015 & 2016) of experiments were conducted, involving different N rates, planting densities and rice cultivars. Both UAV flights and ground spectral measurements were taken along with destructive samplings at critical growth stages of rice (Oryza sativa L.). After UAV imagery preprocessing, both VIs and texture measurements were calculated. Then the optimal normalized difference texture index (NDTI) from UAV imagery was determined for separated stage groups and the entire season. Results demonstrated that aerial VIs performed well only for pre-heading stages (R2 = 0.52-0.70), and photochemical reflectance index and blue N index from ground (PRIg and BNIg) performed consistently well across all growth stages (R2 = 0.48-0.65 and 0.39-0.68). Most texture measurements were weakly related to PNC, but the optimal NDTIs could explain 61 and 51% variability of PNC for separated stage groups and entire season, respectively. Moreover, stepwise multiple linear regression (SMLR) models combining aerial VIs and NDTIs did not significantly improve the accuracy of PNC estimation, while models composed of BNIg and optimal NDTIs exhibited significant improvement for PNC estimation across all growth stages. Therefore, the integration of ground-based narrow band spectral indices with UAV-based textural information might be a promising technique in crop growth monitoring.
| S-EPMC6043795 | biostudies-literature
Project description:Soil moisture content (SMC) is an important factor that affects agricultural development in arid regions. Compared with the space-borne remote sensing system, the unmanned aerial vehicle (UAV) has been widely used because of its stronger controllability and higher resolution. It also provides a more convenient method for monitoring SMC than normal measurement methods that includes field sampling and oven-drying techniques. However, research based on UAV hyperspectral data has not yet formed a standard procedure in arid regions. Therefore, a universal processing scheme is required. We hypothesized that combining pretreatments of UAV hyperspectral imagery under optimal indices and a set of field observations within a machine learning framework will yield a highly accurate estimate of SMC. Optimal 2D spectral indices act as indispensable variables and allow us to characterize a model's SMC performance and spatial distribution. For this purpose, we used hyperspectral imagery and a total of 70 topsoil samples (0-10 cm) from the farmland (2.5 × 104 m2) of Fukang City, Xinjiang Uygur AutonomousRegion, China. The random forest (RF) method and extreme learning machine (ELM) were used to estimate the SMC using six methods of pretreatments combined with four optimal spectral indices. The validation accuracy of the estimated method clearly increased compared with that of linear models. The combination of pretreatments and indices by our assessment effectively eliminated the interference and the noises. Comparing two machine learning algorithms showed that the RF models were superior to the ELM models, and the best model was PIR (R 2 val = 0.907, RMSEP = 1.477, and RPD = 3.396). The SMC map predicted via the best scheme was highly similar to the SMC map measured. We conclude that combining preprocessed spectral indices and machine learning algorithms allows estimation of SMC with high accuracy (R 2 val = 0.907) via UAV hyperspectral imagery on a regional scale. Ultimately, our program might improve management and conservation strategies for agroecosystem systems in arid regions.
| S-EPMC6501779 | biostudies-literature
Project description:Hyperspectral image (HSI) consists of hundreds of narrow spectral band components with rich spectral and spatial information. Extreme Learning Machine (ELM) has been widely used for HSI analysis. However, the classical ELM is difficult to use for sparse feature leaning due to its randomly generated hidden layer. In this paper, we propose a novel unsupervised sparse feature learning approach, called Evolutionary Multiobjective-based ELM (EMO-ELM), and apply it to HSI feature extraction. Specifically, we represent the task of constructing the ELM Autoencoder (ELM-AE) as a multiobjective optimization problem that takes the sparsity of hidden layer outputs and the reconstruction error as two conflicting objectives. Then, we adopt an Evolutionary Multiobjective Optimization (EMO) method to solve the two objectives, simultaneously. To find the best solution from the Pareto solution set and construct the best trade-off feature extractor, a curvature-based method is proposed to focus on the knee area of the Pareto solutions. Benefited from the EMO, the proposed EMO-ELM is less prone to fall into a local minimum and has fewer trainable parameters than gradient-based AEs. Experiments on two real HSIs demonstrate that the features learned by EMO-ELM not only preserve better sparsity but also achieve superior separability than many existing feature learning methods.
| S-EPMC7085560 | biostudies-literature
Project description:Farmers require accurate yield estimates, since they are key to predicting the volume of stock needed at supermarkets and to organizing harvesting operations. In many cases, the yield is visually estimated by the crop producer, but this approach is not accurate or time efficient. This study presents a rapid sensing and yield estimation scheme using off-the-shelf aerial imagery and deep learning. A Region-Convolutional Neural Network was trained to detect and count the number of apple fruit on individual trees located on the orthomosaic built from images taken by the unmanned aerial vehicle (UAV). The results obtained with the proposed approach were compared with apple counts made in situ by an agrotechnician, and an R2 value of 0.86 was acquired (MAE: 10.35 and RMSE: 13.56). As only parts of the tree fruits were visible in the top-view images, linear regression was used to estimate the number of total apples on each tree. An R2 value of 0.80 (MAE: 128.56 and RMSE: 130.56) was obtained. With the number of fruits detected and tree coordinates two shapefile using Python script in Google Colab were generated. With the previous information two yield maps were displayed: one with information per tree and another with information per tree row. We are confident that these results will help to maximize the crop producers' outputs via optimized orchard management.
| S-EPMC7378326 | biostudies-literature
Project description:Background Tree crown extraction is an important research topic in forest resource monitoring. In particular, it is a prerequisite for disease detection and mapping the degree of damage caused by forest pests. Unmanned aerial vehicle (UAV)-based hyperspectral imaging is effective for surveying and monitoring forest health. This article proposes a spectral-spatial classification framework that uses UAV-based hyperspectral images and combines a support vector machine (SVM) with an edge-preserving filter (EPF) for completing classification more finely to automatically extract tree crowns damaged by Dendrolimus tabulaeformis Tsai et Liu (D. tabulaeformis) in Jianping county of Liaoning province, China. Results Experiments were conducted using UAV-based hyperspectral images, and the accuracy of the results was assessed using the mean structure similarity index (MSSIM), the overall accuracy (OA), kappa coefficient, and classification accuracy of damaged Pinus tabulaeformis. Optimized results showed that the OA of the spectral-spatial classification method can reach 93.17%, and the extraction accuracy of damaged tree crowns is 7.50–9.74% higher than that achieved using the traditional SVM classifier. Conclusion This study is one of only a few in which a UAV-based hyperspectral image has been used to extract tree crowns damaged by D. tabulaeformis. Moreover, the proposed classification method can effectively extract damaged tree crowns; hence, it can serve as a reference for future studies on both forest health monitoring and larger-scale forest pest and disease assessment.
| S-EPMC7547508 | biostudies-literature
Project description:Hyperspectral cameras onboard unmanned aerial vehicles (UAVs) have recently emerged for monitoring crop traits at the sub-field scale. Different physical, statistical, and hybrid methods for crop trait retrieval have been developed. However, spectra collected from UAVs can be confounded by various issues, including illumination variation throughout the crop growing season, the effect of which on the retrieval performance is not well understood at present. In this study, four retrieval methods are compared, in terms of retrieving the leaf area index (LAI), fractional vegetation cover (fCover), and canopy chlorophyll content (CCC) of potato plants over an agricultural field for six dates during the growing season. We analyzed: (1) The standard look-up table method (LUTstd), (2) an improved (regularized) LUT method that involves variable correlation (LUTreg), (3) hybrid methods, and (4) random forest regression without (RF) and with (RFexp) the exposure time as an additional explanatory variable. The Soil-Leaf-Canopy (SLC) model was used in association with the LUT-based inversion and hybrid methods, while the statistical modelling methods (RF and RFexp) relied entirely on in situ data. The results revealed that RFexp was the best-performing method, yielding the highest accuracies, in terms of the normalized root mean square error (NRMSE), for LAI (5.36%), fCover (5.87%), and CCC (15.01%). RFexp was able to reduce the effects of illumination variability and cloud shadows. LUTreg outperformed the other two retrieval methods (hybrid methods and LUTstd), with an NRMSE of 9.18% for LAI, 10.46% for fCover, and 12.16% for CCC. Conversely, LUTreg led to lower accuracies than those derived from RF for LAI (5.51%) and for fCover (6.23%), but not for CCC (16.21%). Therefore, the machine learning approaches-in particular, RF-appear to be the most promising retrieval methods for application to UAV-based hyperspectral data.
| S-EPMC7613394 | biostudies-literature
Project description:Understanding the interactions among agricultural processes, soil, and plants is necessary for optimizing crop yield and productivity. This study focuses on developing effective monitoring and analysis methodologies that estimate key soil and plant properties. These methodologies include data acquisition and processing approaches that use unmanned aerial vehicles (UAVs) and surface geophysical techniques. In particular, we applied these approaches to a soybean farm in Arkansas to characterize the soil-plant coupled spatial and temporal heterogeneity, as well as to identify key environmental factors that influence plant growth and yield. UAV-based multitemporal acquisition of high-resolution RGB (red-green-blue) imagery and direct measurements were used to monitor plant height and photosynthetic activity. We present an algorithm that efficiently exploits the high-resolution UAV images to estimate plant spatial abundance and plant vigor throughout the growing season. Such plant characterization is extremely important for the identification of anomalous areas, providing easily interpretable information that can be used to guide near-real-time farming decisions. Additionally, high-resolution multitemporal surface geophysical measurements of apparent soil electrical conductivity were used to estimate the spatial heterogeneity of soil texture. By integrating the multiscale multitype soil and plant datasets, we identified the spatiotemporal co-variance between soil properties and plant development and yield. Our novel approach for early season monitoring of plant spatial abundance identified areas of low productivity controlled by soil clay content, while temporal analysis of geophysical data showed the impact of soil moisture and irrigation practice (controlled by topography) on plant dynamics. Our study demonstrates the effective coupling of UAV data products with geophysical data to extract critical information for farm management.
| S-EPMC8007594 | biostudies-literature
Project description:The use of fertilizer results in tall rice plants that are susceptible to lodging and results in reduced plant yields. In this study, using chromosome segment substitution lines, we identified an effective quantitative trait loci (QTL) for culm strength, which was designated STRONG CULM2 (SCM2). Positional cloning of the gene revealed that SCM2 was identical to ABERRANT PANICLE ORGANIZATION1 (APO1), a gene previously reported to control panicle structure. A near-isogenic line carrying SCM2 showed enhanced culm strength and increased spikelet number because of the pleiotropic effects of the gene. Although SCM2 is a gain-of-function mutant of APO1, it does not have the negative effects reported for APO1 overexpression mutants, such as decreased panicle number and abnormal spikelet morphology. The identification of lodging-resistance genes by QTL analysis combined with positional cloning is a useful approach for improving lodging resistance and overall productivity in rice.
| S-EPMC3065348 | biostudies-literature