Effect of Wood Biomass Ash Storage on the Properties of Cement Composites.
Ontology highlight
ABSTRACT:
SUBMITTER: Carevic I
PROVIDER: S-EPMC8036677 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The data presented herein are compiled of the research summary of "Characterization of High-Volume Fly-Ash Cement Paste for Sustainable Construction Application" (Aydin and Arel, 2017) [1]. This data article provides general information about the ASTM Class C and Class F fly ash cement paste composites composed of silica fume, lime, water reducing admixtures in three different level of workability (0 mm, 100 mm and 200 mm). The dataset here also helps the readers to understand the links with the basic properties of the ingredients, for example, how can porosity be predicted based on the mixture design? how can the strength of the material be linked with the basic strengths of the constituent ingredients?.
| S-EPMC5711659 | biostudies-literature
Project description:Substitution of cement clinker with suitable excess materials from other processes is an effective way to reduce CO2 emissions of cement production. Moreover, specific properties of the resulting mortar or concrete can be designed with different clinker replacement materials and their mixing ratios. In this study, bottom and fly ashes from six biomass power plants with different power scales and various flue-gas treatment strategies were admixed to mortars, whose properties (influence of water requirement and final compressive strength) were then assessed in the laboratory by following industrial standard procedures. Results reveal that fly ash from a cyclone of a medium-scale combustor burning Miscanthus straw amended with 2 wt % Ca(OH)2 (to prevent slagging during combustion) turned out to be well suited as a clinker replacement material, even boosting final compressive strength of the mortar. Wood-chip bottom ashes and fly ash from a cyclone exhibited acceptable results, whereas fly ash from electrostatic precipitators (ESPs) and baghouse filters lowered final compressive strength of the mortar when admixed. The scale of the power plant is positively correlated with final compressive strength in the case of ESPs. Cenospheres, typical fly ash particles present in cyclone ash, seem to have a positive effect on water-to-binder ratio and final compressive strength. In contrast, potassium salts, which are most abundant in ash from ESPs and baghouse filters, appear to have a negative influence on these properties. Grinding of the biomass ashes to a typical Portland cement fineness had a positive effect on mortar quality. All fly ashes had high contents of Cd, and baghouse filter ash contained As in amounts about four times the Swiss limit value for cement of 30 ppm; only bottom ash and cyclone ash from Miscanthus exhibited concentrations below respective limit values for all critical trace elements. To assess the immobilization potential of contaminating elements during the cement hardening process, blended mortars were crushed and subjected to multistep leaching, followed by subsequent analysis of the leachates by atomic absorption spectroscopy. Immobilization of Cd by the mortar was particularly effective. Our results indicate that fly ash from wood-chip combustion is most suitable as an amendment to cement when it was trapped by a cyclone rather than by the ESPs or baghouse filters.
| S-EPMC8204738 | biostudies-literature
Project description:Several types of hematite nanoparticles (α-Fe2O3) have been investigated for their effects on the structure and properties of fly ash (FA) blended cement. All synthesized nanoparticles were found to be of spherical shape, but of different particle sizes ranging from 10 to 195 nm depending on the surfactant used in their preparation. The cement hydration with time showed 1.0% α-Fe2O3 nanoparticles are effective accelerators for FA blended cement. Moreover, adding α-Fe2O3 nanoparticles in FA blended cement enhanced the compressive strength and workability of cement. Nanoparticle size and size distribution were important for optimal filling of various size of pores within the cement structure.
| S-EPMC8070749 | biostudies-literature
Project description:Mechanically-activated wood-based biomass ash (WBA) was studied as a potential active admixture for design of a novel lime-pozzolan-based mortar for renovation purposes. The replacement ratio of lime hydrate in a mortar mix composition was 5%, 10%, and 15% by mass. The water/binder ratio and the sand/binder ratio were kept constant for all examined mortar mixes. Both binder constituents were characterized by their powder density, specific density, BET (Brunauer-Emmett-Teller), and Blaine specific surfaces. Their chemical composition was measured by X-ray fluorescence analysis (XRF) and mineralogical analysis was performed using X-ray diffraction (XRD). Morphology of WBA was investigated by scanning electron microscopy (SEM) and element mapping was performed using an energy dispersive spectroscopy (EDS) analyzer. The pozzolanic activity of WBA was tested by the Chapelle test and assessment of the Portlandite content used simultaneous thermal analysis (STA). For the hardened mortar samples, a complete set of structural, mechanical, hygric, and thermal parameters was experimentally determined. The mortars with WBA admixing yielded similar or better functional properties than those obtained for traditional pure lime-based plaster, pointing to their presumed application as rendering and walling renovation mortars. As the Chapelle test, STA, and mechanical test proved high pozzolanity of WBA, it was classified as an alternative eco-efficient low-cost pozzolan for use in lime blend-based building materials. The savings in CO2 emissions and energy by the use of WBA as a partial lime hydrate substitute in mortar composition were also highly appreciated with respect to the sustainability of the construction industry.
| S-EPMC6678867 | biostudies-literature
Project description:Graphene, renowned for its exceptional mechanical, thermal, and electrical properties, is being explored as a cement nanofiller in the construction field. However, the limited water dispersibility of graphene requires the use of polymer superplasticizers, such as polycarboxylate ether (PCE). Previous studies have investigated the mechanisms by which PCE facilitates the dispersion of graphene within cement nanocomposites. However, such studies have made minimal progress, indicating a lack of understanding of the effect of residual PCE (rPCE) remaining in aqueous solution without binding to graphene. In this study, the effects of rPCE on the dispersion of graphene and the mechanical properties of graphene-cement composites (GCCs) were systematically analyzed. For this purpose, the content of rPCE was accurately measured through the centrifugation process and thermal analysis of graphene dispersion with PCE, and the result was 78.0 wt.% compared to graphene. The optical microscopy, particle size analysis, and contact angle measurement of the graphene dispersions with and without rPCE confirmed that rPCE is crucial for the dispersion of graphene and the enhancement of the interfacial affinity between graphene and cement. Additionally, the compressive strength of GCC with rPCE exhibited a substantial enhancement of approximately 10% (68.36 MPa) compared to plain cement (62.33 MPa). The effectiveness of rPCE in enhancing compressive strength correlated with the uniform dispersion of graphene within GCC and the promotion of cement hydration, as evidenced by field emission scanning electron microscopy and X-ray diffraction, respectively.
| S-EPMC11013087 | biostudies-literature
Project description:Delignified wood (DW) offers a versatile platform for the manufacturing of composites, with material properties ranging from stiff to soft and flexible by preserving the preferential fiber directionality of natural wood through a structure-retaining production process. This study presents a facile method for fabricating anisotropic and mechanically tunable DW-hydrogel composites. These composites were produced by infiltrating delignified spruce wood with an aqueous gelatin solution followed by chemical crosslinking. The mechanical properties could be modulated across a broad strength and stiffness range (1.2-18.3 MPa and 170-1455 MPa, respectively) by varying the crosslinking time. The diffusion-led crosslinking further allowed to manufacture mechanically graded structures. The resulting uniaxial, tubular structure of the anisotropic DW-hydrogel composite enabled the alignment of murine fibroblasts in vitro, which could be utilized in future studies on potential applications in tissue engineering.
| S-EPMC10477686 | biostudies-literature
Project description:This paper presents research on the impact of fly ash addition on selected physical and mechanical parameters of concrete made with slag cement. Experimental tests were carried out to measure the migration of chloride ions in concrete, the tightness of concrete exposed to water under pressure, and the compressive strength and tensile strength of concrete during splitting. Six series of concrete mixes made with CEM IIIA 42.5 and 32.5 cement were tested. The base concrete mix was modified by adding fly ash as a partial cement substitute in the amounts of 25% and 33%. A comparative analysis of the obtained results indicates a significant improvement in tightness, especially in concrete based on CEM IIIA 32.5 cement and resistance to chloride ion penetration for the concretes containing fly ash additive. In the concretes containing fly ash additive, a slower rate of initial strength increase and high strength over a long period of maturation are shown. In accordance with the presented research results, it is suggested that changes to the European standardization system be considered, to allow the use of fly ash additive in concrete made with CEM IIIA 42.5 or 32.5 cement classes. Such a solution is not currently acceptable in standards in some European Countries.
| S-EPMC7435652 | biostudies-literature
Project description:High-performance fiber-reinforced cement composites (HPFRCCs) have been widely used in structural engineering due to their excellent performance. With the trend of lightweight construction, these materials, which can be used in prefabricated components, are becoming more and more important. This study investigated the influence of the water-cement (w/c) ratio, within the 0.19-0.28 range, on the rheological and mechanical properties of HPFRCCs; the pore structure and microstructure were observed to evaluate its effect. An elastic modulus test showed that a smaller w/c ratio would result in a higher rigidity of the material. Both the yield shear stress and plastic viscosity decreased to significantly different degrees with an increasing w/c ratio; a decrease in the yield shear stress and plastic viscosity was conducive to air discharge from the composite and, hence, reduced the air content. Most of the internal pores had a diameter of 20-100 nm or larger than 200 nm, while the proportion of those with a diameter of 100-200 nm was relatively low. When the w/c ratio was below 0.22, the flexural and compressive strengths barely increased due to an increment in the number of larger pores (i.e., diameter >200 nm). The results showed that the yield shear stress, plastic viscosity, pore uniformity, and the number of pores with a diameter above 200 nm are the dominant factors affecting the HPFRCC performance at a low w/c ratio.
| S-EPMC8945063 | biostudies-literature
Project description:The aim of this study is to develop a process to produce high-performance cement-based composites reinforced with flax nonwoven fabrics, analyzing the influence of the fabric structure-thickness and entanglement-on mechanical behavior under flexural and tensile loadings. For this purpose, composite with flax nonwoven fabrics with different thicknesses were first prepared and their cement infiltration was evaluated with backscattered electron (BSE) images. The nonwoven fabrics with the optimized thickness were then subjected to a water treatment to improve their stability to humid environments and the fiber-matrix adhesion. For a fixed thickness, the effect of the nonwoven entanglement on the mechanical behavior was evaluated under flexural and direct tension tests. The obtained results indicate that the flax nonwoven fabric reinforcement leads to cement composites with substantial enhancement of ductility.
| S-EPMC5459217 | biostudies-literature
Project description:The aim of this study was to investigate the effect of recycling on polypropylene (PP) and wood-fiber thermoplastic composites (WPCs) using a co-rotating twin-screw extruder. After nine extrusion passes microscopy studies confirmed that the fiber length decreased with the increased number of recycling passes but the increased processing time also resulted in excellent dispersion and interfacial adhesion of the wood fibers in the PP matrix. Thermal, rheological, and mechanical properties were studied. The repeated extrusion passes had minimal effect on thermal behavior and the viscosity decreased with an increased number of passes, indicating slight degradation. The recycling processes had an effect on the tensile strength of WPCs while the effect was minor on the PP. However, even after the nine recycling passes the strength of WPC was considerably better (37 MPa) compared to PP (28 MPa). The good degree of property retention after recycling makes this recycling strategy a viable alternative to discarding the materials. Thus, it has been demonstrated that, by following the most commonly used extrusion process, WPCs can be recycled several times and this methodology can be industrially adapted for the manufacturing of recycled products.
| S-EPMC7463641 | biostudies-literature