Impact Modifiers and Compatibilizers for Versatile Epoxy-Based Adhesive Films with Curing and Deoxidizing Capabilities.
Ontology highlight
ABSTRACT:
SUBMITTER: Lee BY
PROVIDER: S-EPMC8037572 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In general, although abundant literature studies are available on epoxy resin systems, a complete description of the curing kinetics in epoxy-cyanate ester composites relevant to the microelectronics industry is still lacking. Herein, curing behaviors of Ajinomoto build-up films, which are epoxy/silica composites, were studied by the non-isothermal differential scanning calorimetry method, and then, three non-isothermal curing kinetics models and model-free curing methods were used to analyze curing behaviors. In addition, a copper layer was also deposited onto the surface of the build-up film, and its interfacial adhesion property was also analyzed at different pre-curing conditions. The results showed that the curing reaction of the build-up film contains two curing reaction processes, and the first curing process is suited for the autocatalytic curing model, while the other curing process is suited for the Kamal curing kinetics model. Three model-free curing methods were used to calculate the activating energy at different degrees of curing, which indicated that the activating energy is variable during the whole curing process. The interfacial adhesion strength between the build-up film and copper layer decreased with the increase in the degree of curing, which is attributed to the contribution of mechanical anchoring. This work will offer guidance in curing behaviors for improving interfacial bonding force and controlling warpage behavior for chip substrates in the future.
| S-EPMC10500575 | biostudies-literature
Project description:In order to synthesize a new kind of buoyancy material with high-strength, low-density and low-water-absorption and to study the curing reaction of tetraglycidylamine epoxy resin with an aromatic amine curing agent, the non-isothermal differential scanning calorimeter (DSC) method is used to calculate the curing kinetics parameters of N,N,N',N'-tetraepoxypropyl-4,4'-diaminodiphenylmethane epoxy resin (AG-80) and the m-xylylenediamine (m-XDA) curing process. Further, buoyancy materials with different volume fractions of hollow glass microsphere (HGM) compounded with a AG-80 epoxy resin matrix were prepared and characterized. The curing kinetics calculation results show that, for the curing reaction of the AG-80/m-XDA system, the apparent activation energy increases with the conversion rates increasing and the reaction model is the Jander equation (three-dimensional diffusion, 3D, n = 1/2). The experimental results show that the density, compressive strength, saturated water absorption and water absorption rate of the composite with 55 v % HGM are 0.668 g·cm-3, 107.07 MPa, 0.17% and 0.025 h-1/2, respectively. This kind of composite can probably be used as a deep-sea buoyancy material.
| S-EPMC7463793 | biostudies-literature
Project description:We investigated the influence of anion type (salicylate, [(MOB)MIm][Sal], vs chloride, [(MOB)MIm][Cl]) of imidazolium-based ionic liquid (IL) and its content on the curing kinetics of bisphenol A diglicydyl ether (DGEBA of molecular weight M n = 340 g/mol). Further physicochemical properties (i.e., glass transition temperature, T g, and conductivity, σdc) of produced polymers were investigated. The polymerization of the studied systems was examined at various molar ratios (1:1, 10:1, and 20:1) at different reaction temperatures (T reaction = 353-383 K) by using differential scanning calorimetry (DSC). Interestingly, both DGEBA/IL compositions studied herein revealed significantly different reaction kinetics and yielded materials of completely distinct physical properties. Surprisingly, in contrast to [(MOB)MIm][Cl], for the low concentration of [(MOB)MIm][Sal] in the reaction mixture, an additional step in the kinetic curves, likely due to the combined enhanced initiation activity of anion (salicylate)-cation (imidazolium-based), was noted. To thoroughly analyze the kinetics of all studied systems, including the two-step kinetics of DGEBA/[(MOB)MIm][Sal], we applied a new approach that relies on the combination of the two phenomenological Avrami equations. Analysis of the determined constant rates revealed that the reaction occurring in the presence of the salicylate anion is characterized by higher activation energy with respect to those with the chloride. Moreover, DGEBA/[(MOB)MIm][Sal] cured materials have higher T g in comparison to DGEBA polymerized with [(MOB)MIm][Cl] independent of the IL concentration. This fact might indicate that, most likely, the products of hardening are highly cross-linked (high T g) or oligomeric linear polymers (low T g) in the former and latter cases, respectively. Such a change in the chemical structure of the polymer is also reflected in the dc conductivity measured at the glass transition temperature, which is much higher for DGEBA cured with [(MOB)MIm][Cl]. Herein, we have clearly demonstrated that the type of anion has a crucial impact on the polymerization mechanism, kinetics, and properties of produced materials.
| S-EPMC7467775 | biostudies-literature
Project description:Instant curing adhesives typically fall within three categories, being activated by either light (photocuring), heat (thermocuring) or chemical means. These curing strategies limit applications to specific substrates and can only be activated under certain conditions. Here we present the development of an instant curing adhesive through low-voltage activation. The electrocuring adhesive is synthesized by grafting carbene precursors on polyamidoamine dendrimers and dissolving in aqueous solvents to form viscous gels. The electrocuring adhesives are activated at -2?V versus Ag/AgCl, allowing tunable crosslinking within the dendrimer matrix and on both electrode surfaces. As the applied voltage discontinued, crosslinking immediately terminated. Thus, crosslinking initiation and propagation are observed to be voltage and time dependent, enabling tuning of both material properties and adhesive strength. The electrocuring adhesive has immediate implications in manufacturing and development of implantable bioadhesives.
| S-EPMC4557340 | biostudies-literature
Project description:Plasmids are widely used and essential tools in molecular biology. However, plasmids often impose a metabolic burden and are only temporarily useful for genetic engineering, bio-sensing and characterization purposes. While numerous techniques for genetic manipulation exist, a universal tool enabling rapid removal of plasmids from bacterial cells is lacking.Based on replicon abundance and sequence conservation analysis, we show that the vast majority of bacterial cloning and expression vectors share sequence similarities that allow for broad CRISPR-Cas9 targeting. We have constructed a universal plasmid-curing system (pFREE) and developed a one-step protocol and PCR procedure that allow for identification of plasmid-free clones within 24 h. While the context of the targeted replicons affects efficiency, we obtained curing efficiencies between 40 and 100% for the plasmids most widely used for expression and engineering purposes. By virtue of the CRISPR-Cas9 targeting, our platform is highly expandable and can be applied in a broad host context. We exemplify the wide applicability of our system in Gram-negative bacteria by demonstrating the successful application in both Escherichia coli and the promising cell factory chassis Pseudomonas putida.As a fast and freely available plasmid-curing system, targeting virtually all vectors used for cloning and expression purposes, we believe that pFREE has the potential to eliminate the need for individualized vector suicide solutions in molecular biology. We envision the application of pFREE to be especially useful in methodologies involving multiple plasmids, used sequentially or simultaneously, which are becoming increasingly popular for genome editing or combinatorial pathway engineering.
| S-EPMC5540278 | biostudies-literature
Project description:Bio-based aromatic diamines from vanillin substrate were successfully synthesized and characterized. These amines, i.e., methylated divanillylamine (MDVA) and 3,4-dimethoxydianiline (DMAN), were then tested as curing agents for the design of bio-based epoxy thermosets. The epoxy thermosets obtained from these novel vanillin-based amines exhibited promising thermomechanical properties in terms of glass transition temperature and char residue.
| S-EPMC6743216 | biostudies-literature
Project description:Fluoride-based compounds doped with rare-earth cations are the preferred choice of materials to achieve efficient upconversion, of interest for a plethora of applications ranging from bioimaging to energy harvesting. Herein, we demonstrate a simple route to fabricate bright upconverting films that are transparent, self-standing, flexible, and emit different colors. Starting from the solvothermal synthesis of uniform and colloidally stable yttrium fluoride nanoparticles doped with Yb3+ and Er3+, Ho3+, or Tm3+, we find the experimental conditions to process the nanophosphors as optical quality films of controlled thickness between few hundreds of nanometers and several micrometers. A thorough analysis of both structural and photophysical properties of films annealed at different temperatures reveals a tradeoff between the oxidation of the matrix, which transitions through an oxyfluoride crystal phase, and the efficiency of the upconversion photoluminescence process. It represents a significant step forward in the understanding of the fundamental properties of upconverting materials and can be leveraged for the optimization of upconversion systems in general. We prove bright multicolor upconversion photoluminescence in oxyfluoride-based phosphor transparent films upon excitation with a 980 nm laser for both rigid and flexible versions of the layers, being possible to use the latter to coat surfaces of arbitrary shape. Our results pave the way toward the development of upconverting coatings that can be conveniently integrated in applications that demand a large degree of versatility.
| S-EPMC8251696 | biostudies-literature
Project description:Epoxy resin is indispensable for modern industry because of its excellent mechanical properties, chemical resistance, and excellent moldability. To date, various methods have been used to investigate the physical properties of the cured product and the kinetics of the curing process, but its microscopic dynamics have been insufficiently studied. In this study, the microscopic dynamics in the curing process of a catalytic epoxy resin were investigated under different temperature conditions utilizing X-ray photon correlation spectroscopy. Our results revealed that the temperature conditions greatly affected the dynamical heterogeneity and cross-linking density of the cured materials. An overview of the microscopic mechanism of the curing process was clearly presented through comparison with the measurement results of other methods, such as 1H-pulse nuclear magnetic resonance spectroscopy. The quantification of such heterogeneous dynamics is particularly useful for optimizing the curing conditions of various materials to improve their physical properties.
| S-EPMC8129072 | biostudies-literature
Project description:The polyaddition between dicyclic carbonates and diamines leading to poly(hydroxy urethane)s (PHUs) has emerged as the preferred method for the synthesis of green, non-isocyanate polyurethanes. However, when proposed for use as structural adhesives, the long times for completion of aminolysis of the 5-membered cyclic carbonates under ambient conditions force the use of complementary chemistries to accelerate the curing process. In this work, a system that combines an amino-terminated PHU (NH2-PHU-NH2), an epoxy resin, and a thiol compound was employed to develop high-shear strength PHU-epoxy hybrid adhesives able to cure at room temperature in short times. A NH2-PHU-NH2 prepolymer synthesized by using a sub-stoichiometric quantity of dicyclic carbonates was mixed with a bisphenol A-based epoxy resin for the preparation of the structural adhesive. While this adhesive showed good lap-shear strength and shear resistance under static load and temperature, the curing process was slow. In order to speed up the curing process, a thiol (trimethylolpropane tris(3-mercapto propionate)) was added and its impact on the curing process as well as on the adhesive properties was evaluated. The trifunctional thiol additive allowed for faster curing in the presence of the 1,1,3,3-tetramethylguanidine basic catalyst. Moreover, a combination of NH2-PHU-NH2 and the thiol as curing agents for the epoxy resin resulted in adhesives with superior toughness, without any deterioration of the ultimate lap-shear strength or shear resistance under load and temperature, making these adhesives suitable for high-demand applications in the automotive industry.
| S-EPMC9745729 | biostudies-literature
Project description:A furfural-based DOPO-containing flame retardant, 6,6'-(((methylenebis(4,1-phenylene))bis(azanediyl))bis(furan-2-ylmethylene))bis(dibenzo[c,e][1,2]oxaphosphinine 6-oxide) (MBF-DOPO), was synthesized and utilized as a co-curing agent of 4,4'-diaminodiphenyl methane (DDM) for fire-safe epoxy thermosets. For the cured epoxy resin containing 4.0% MBF-DOPO, the limiting oxygen index (LOI) reached 32.9% (with the V-0 rating in UL-94 test), and the peak heat release rate and total smoke production values were respectively decreased by 29.3% and 33.6%, compared to pure epoxy resin. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) results confirmed that the furfural-based flame retardant MBF-DOPO promoted the charring formation of the epoxy matrix, which effectively isolated the gas and heat transfer during combustion and thus enhanced the fire-safety performance of the epoxy thermosets. This work provides an effective route for synthesizing a furfural-based flame retardant, which possesses great potential for application in fire-safe epoxy thermosets.
| S-EPMC9048244 | biostudies-literature