Adsorptive Molecular Sieving of Styrene over Ethylbenzene by Trianglimine Crystals.
Ontology highlight
ABSTRACT:
SUBMITTER: Dey A
PROVIDER: S-EPMC8041285 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:To separate small molecules/species, it's crucial but still challenging to narrow the 2D-interspacing of graphene oxide (GO) membranes without damaging the membrane. Here the fast deposition of ultrathin, defect-free and robust GO layers is realized on porous stainless steel hollow fibers (PSSHFs) by a facile and practical electrophoresis deposition (ED) method. In this approach, oxygen-containing groups of GO are selectively reduced, leading to a controlled decrease of the 2D channels of stacked GO layers. The resultant ED-GO@PSSHF composite membranes featured a sharp cutoff between C2 (ethane and ethene) and C3 (propane and propene) hydrocarbons and exhibited nearly complete rejections for the smallest alcohol and ion in aqueous solutions. This demonstrates the versatility of GO based membranes for the precise separation of various types of mixtures. At the same time, a robust mechanical strength of the ED-GO@PSSHF membrane is also achieved due to the enhanced interaction at GO/support and GO/GO interfaces.Producing graphene oxide membranes with narrow channels is desirable for small molecule separations, but methods to narrow the 2D spacing typically result in membrane damage. Here the authors exploit electrophoresis-deposition to prepare GO membranes that are reduced in situ, leading to narrow and uniform 2D channels.
| S-EPMC5635034 | biostudies-literature
Project description:Organic solvents such as phenylacetylene, styrene and ethylbenzene are widely used in industrial processes, especially in the production of rubber or thermoplastics. Despite their important applications detailed knowledge about their structure is limited. In this paper the structures of these three aromatic solvents were investigated using neutron diffraction. The results show that many of their structural characteristics are similar, although the structure of phenylacetylene is more ordered and has a smaller solvation sphere than either ethylbenzene or styrene. Two regions within the first coordination sphere, in which the surrounding molecules show different preferable orientations with respect to the central molecule, were found for each liquid. Additionally, the localisation of the aliphatic chains reveals that they tend to favour closer interactions with each other than to the aromatic rings of the adjacent molecules.
| S-EPMC5811833 | biostudies-literature
Project description:As feedstock chemicals with similar boiling points, cyclohexanol (CHOL) and cyclohexanone (CHON) are often obtained as mixtures during production processes. Separation of mixed CHOL and CHON is important but energy-consuming by distillation. Here we report the development of a new macrocycle RhombicArene, which forms a host-guest complex with CHON through C-H⋯π interactions and hydrogen bonds. The nonporous adaptive crystals of RhombicArene exhibit excellent capability for rapid (30 minutes), exclusive (>99.9%), and recyclable vapor adsorption of CHON in the presence of CHOL under mild and user-friendly conditions.
| S-EPMC8654018 | biostudies-literature
Project description:The selective separation of benzene (Bz) and cyclohexane (Cy) is one of the most challenging chemical separations in the petrochemical and oil industries. In this work, we report an environmentally friendly and energy saving approach to separate Cy over Bz using thienothiophene cages (ThT-cages) with adaptive porosity. Interestingly, cyclohexane was readily captured selectively from an equimolar benzene/cyclohexane mixture with a purity of 94%. This high selectivity arises from the C-H⋯S, C-H⋯π and C-H⋯N interactions between Cy and the thienothiophene ligand. Reversible transformation between the nonporous guest-free structure and the host-guest assembly, endows this system with excellent recyclability with minimal energy requirements.
| S-EPMC8179544 | biostudies-literature
Project description:The development of simple, versatile strategies for the synthesis of metal-organic framework (MOF)-derived membranes are of increasing scientific interest, but challenges exist in understanding suitable fabrication mechanisms. Here we report a route for the complete transformation of a series of MOF membranes and particles, based on multivalent cation substitution. Through our approach, the effective pore size can be reduced through the immobilization of metal salt residues in the cavities, and appropriate MOF crystal facets can be exposed, to achieve competitive molecular sieving capabilities. The method can also be used more generally for the synthesis of a variety of MOF membranes and particles. Importantly, we design and synthesize promising MOF membranes candidates that are hard to achieve through conventional methods. For example, our CuBTC/MIL-100 membrane exhibits 89, 171, 241 and 336 times higher H2 permeance than that of CO2, O2, N2 and CH4, respectively.
| S-EPMC4838892 | biostudies-other
Project description:Molecular sieving membranes with sufficient and uniform nanochannels that break the permeability-selectivity trade-off are desirable for energy-efficient gas separation, and the arising two-dimensional (2D) materials provide new routes for membrane development. However, for 2D lamellar membranes, disordered interlayer nanochannels for mass transport are usually formed between randomly stacked neighboring nanosheets, which is obstructive for highly efficient separation. Therefore, manufacturing lamellar membranes with highly ordered nanochannel structures for fast and precise molecular sieving is still challenging. Here, we report on lamellar stacked MXene membranes with aligned and regular subnanometer channels, taking advantage of the abundant surface-terminating groups on the MXene nanosheets, which exhibit excellent gas separation performance with H2 permeability >2200?Barrer and H2/CO2 selectivity >160, superior to the state-of-the-art membranes. The results of molecular dynamics simulations quantitatively support the experiments, confirming the subnanometer interlayer spacing between the neighboring MXene nanosheets as molecular sieving channels for gas separation.
| S-EPMC5765169 | biostudies-literature
Project description:Metal-organic frameworks (MOFs) are attractive crystalline materials for membranes due to their diverse crystalline pore structures and molecular separation properties. However, the fabrication cost is relatively high compared to conventional polymeric membranes. The concern of the cost could be eased if they are part of a value-added device, for example, as the key separation unit in a lab-on-a-chip device. This study demonstrates the feasibility of miniaturization of MOF membranes by patterning the membrane surface, a necessary step for MOF membranes to be used in compact devices. Water-stable ultrathin UiO-66 membranes with a thickness down to 250 nm on a substrate with a complex pattern were grown. The patterned membranes showed a 100 % improvement in the apparent permeation flux over conventional flat-UiO-66 membranes without compromising the molecular separation property, indicating the complexity of a surface would not be a formidable obstacle to the MOF membrane fabrication.
| S-EPMC6334230 | biostudies-literature
Project description:Ethylbenzene and styrene are air toxicants with widespread nonoccupational exposure sources, including tobacco smoke and diet. Ethylbenzene and styrene (EB/S) exposure was quantified from their common metabolites measured in spot urine samples obtained from participants (≥6 years old) in the 2005-2006 and 2011-2012 cycles of the National Health and Nutrition Examination Survey (NHANES; N = 4690). EB/S metabolites mandelic acid (MA) and phenylglyoxylic acid (PGA) were measured using ultra-high performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry (UPLC-ESI-MS/MS). MA and PGA were detected in 98.9% and 90.6% of tested urine specimens, respectively. Exclusive smokers had 2-fold and 1.6-fold higher median urinary MA and PGA, respectively, compared with non-users. Sampleweighted regression analysis among exclusive smokers showed that smoking 0.5 pack cigarettes per day significantly increased MA (+97.9 μg/L) and PGA (+69.3 μg/L), controlling for potential confounders. In comparison, exposure from the median daily dietary intake of grain products increased MA by 1.95 μg/L and was not associated with statistically significant changes in urinary PGA levels. Conversely, consuming vegetables and fruit was associated with decreased MA and PGA. These results confirm tobacco smoke as a major source of ethylbenzene and styrene exposure for the general U.S. population.
| S-EPMC6382531 | biostudies-literature
Project description:Magnesium aluminate spinel (MgAl2O4) supported Co3O4 catalysts are synthesized and tested for the oxidative dehydrogenation (ODH) of ethylbenzene using CO2 as a soft oxidant. The effect of spinel calcination temperature on the catalytic performance has been systematically investigated. With an increase in the activation temperature from 600 to 900 °C, the active presence of a single-phase MgAl2O4 spinel is observed. A catalyst series consisting of MgAl2O4 spinel with varying Co loadings (10-20 wt%) were prepared and systematically distinguished by ICP, XRD, BET, TPR, NH3-TPD, UV-Vis DRS, FT-IR, XPS, SEM, and TEM. Among the tested cobalt catalysts, 15Co/800MA sample derived by calcination of MgAl2O4 support at 800 °C exhibits the most excellent catalytic performance with the maximum ethylbenzene conversion (≥ 82%). Also, high yields of styrene (≥ 81%) could be consistently achieved on the same active catalyst. Further, the catalyst exhibited almost stable activity during 20 h time-on-stream with a slow decrease in the ethylbenzene conversion from 82 to 59%. However, the selectivity of styrene (98%) stayed almost constant during the reaction. Activation of the MgAl2O4 spinel at 800 °C facilitates a dramatic chemical homogeneity for the alignment of Co3O4 nanoparticles on the surface of the active catalyst. Moreover, the isolated Co3O4 clusters have a strong chemical/electronic interaction with the Mg2+ and Al3+ ions on the support perform a crucial role to achieve the maximum catalytic activity.
| S-EPMC7747735 | biostudies-literature
Project description:Polymer membranes are widely used in separation processes including desalination1, organic solvent nanofiltration2,3 and crude oil fractionation4,5. Nevertheless, direct evidence of subnanometre pores and a feasible method of manipulating their size is still challenging because of the molecular fluctuations of poorly defined voids in polymers6. Macrocycles with intrinsic cavities could potentially tackle this challenge. However, unfunctionalized macrocycles with indistinguishable reactivities tend towards disordered packing in films hundreds of nanometres thick7-9, hindering cavity interconnection and formation of through-pores. Here, we synthesized selectively functionalized macrocycles with differentiated reactivities that preferentially aligned to create well-defined pores across an ultrathin nanofilm. The ordered structure was enhanced by reducing the nanofilm thickness down to several nanometres. This orientated architecture enabled direct visualization of subnanometre macrocycle pores in the nanofilm surfaces, with the size tailored to ångström precision by varying the macrocycle identity. Aligned macrocycle membranes provided twice the methanol permeance and higher selectivity compared to disordered counterparts. Used in high-value separations, exemplified here by enriching cannabidiol oil, they achieved one order of magnitude faster ethanol transport and threefold higher enrichment than commercial state-of-the-art membranes. This approach offers a feasible strategy for creating subnanometre channels in polymer membranes, and demonstrates their potential for accurate molecular separations.
| S-EPMC9433321 | biostudies-literature