Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Anisotropic Janus SiP₂ Monolayer as a Photocatalyst for Water Splitting.

ABSTRACT: The design of materials meeting the rigorous requirements of photocatalytic water splitting is still a challenge. Anisotropic Janus 2D materials exhibit great potential due to outstandingly high photocatalytic efficiency. Unfortunately, these materials are scarce. By means of ab initio swarm-intelligence search calculations, we identify a SiP₂ monolayer with Janus structure (i.e., out-of-plane asymmetry). The material turns out to be semiconducting with an indirect band gap of 2.39 eV enclosing the redox potentials of water. Notably, the oxygen and hydrogen evolution half reactions can happen simultaneously at the Si and P atoms, respectively, driven merely by the radiation-induced electrons and holes. The carrier mobility is found to be anisotropic and high, up to 10^-4 cm² V^-1 s^-1, facilitating fast transport of the photogenerated carriers. The SiP₂ monolayer shows remarkably strong optical absorption in the visible-to-ultraviolet range of the solar spectrum, ensuring efficient utilization of the solar energy.

SUBMITTER: Yu T

PROVIDER: S-EPMC8041313 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Examining the surface evolution of LaTiOxNy an oxynitride solar water splitting photocatalyst.

Project description:LaTiOxNy oxynitride thin films are employed to study the surface modifications at the solid-liquid interface that occur during photoelectrocatalytic water splitting. Neutron reflectometry and grazing incidence x-ray absorption spectroscopy were utilised to distinguish between the surface and bulk signals, with a surface sensitivity of 3 nm. Here we show, contrary to what is typically assumed, that the A cations are active sites that undergo oxidation at the surface as a consequence of the water splitting process. Whereas, the B cations undergo local disordering with the valence state remaining unchanged. This surface modification reduces the overall water splitting efficiency, but is suppressed when the oxynitride thin films are decorated with a co-catalyst. With this example we present the possibilities of surface sensitive studies using techniques capable of operando measurements in water, opening up new opportunities for applications to other materials and for surface sensitive, operando studies of the water splitting process.

| S-EPMC7138824 | biostudies-literature

Plasmonic Pt nanoparticles-TiO2 hierarchical nano-architecture as a visible light photocatalyst for water splitting.

Project description:Visible light-driven water splitting (VLWS) into hydrogen and oxygen is attractive and depends on efficient photocatalysts. Herein, we demonstrate the first exploration of the capability to control the morphology of nanostructured TiO2 in conjunction with the choice of a suitable plasmonic metal (PM) to fabricate novel photocatalysts that are capable of harvesting visible light for more efficient VL-fuel conversion. This methodology affords us to successful access to the novel plasmonic Pt/TiO2-HA (large Pt nanoparticles (NPs) supported on TiO2 hierarchical nano-architecture (TiO2-HA)) photocatalysts that exhibit plasmon absorption in the visible range and consequent outstanding activity and durability for VLWS. Particularly, the Pt/TiO2-HA shows an excellent photocatalytic activity for overall water splitting rather than only for hydrogen evolution (HE), which is superior to those of the conventional plasmonic Au/TiO2 photocatalysts. The synergistic effects of the high Schottky barrier at the Pt-TiO2-HA interface, which induces the stronger reduction ability of hot electrons, and intrinsic Pt catalytic activity are responsible for the exceptional photocatalytic performance of Pt/TiO2-HA and simplify the composition of plasmonic photocatalysts.

| S-EPMC6212491 | biostudies-literature

Theoretical Prediction of a Bi-Doped β-Antimonene Monolayer as a Highly Efficient Photocatalyst for Oxygen Reduction and Overall Water Splitting.

Project description:The photo-/electrocatalysts with high activities for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and the oxygen reduction reaction (ORR) are of significance for the advancement of photo-/electrochemical energy systems such as solar energy to resolve the global energy crisis, reversible water electrolyzers, metal-air batteries, and fuel cells. In the present work, we have systematically investigated the photochemical performance of the 2D β-antimonene (β-Sb) monolayer. From density functional theory investigations, β-Sb with single-atom doping possesses a trifunctional photocatalyst with high energetics and thermal stabilities. In particular, it is predicted that the performance of the HER activity of β-Sb will be superior to most of the 2D materials. Specifically, β-Sb with single atom replacement has even superior that the reference catalysts IrO2(110) and Pt(111) with relatively low overpotential values for ORR and OER mechanisms. The superior catalytic performance of β-Sb has been described by its electronic structures, charge transfer mechanism, and suitable valence and conduction band edge positions versus normal hydrogen electrode. Meanwhile, the low overpotential of multifunctional photocatalysts of the Bi@β-Sb monolayer makes them show a remarkable performance in overall water splitting (0.06 V for HER, 0.25 V for OER, and 0.31 V for ORR). In general, the Bi@β-Sb monolayer may be an excellent trifunctional catalyst that exhibits high activity toward all electrode reactions of hydrogen and oxygen.

| S-EPMC8640967 | biostudies-literature

Single-Layer GaInSe3: Promising Water-Splitting Photocatalyst with Solar Conversion Efficiency over 30% from Theoretical Calculations.

Project description:Hydrogen energy from solar water-splitting is known as an ideal method with which to address the energy crisis and global environmental pollution. Herein, the first-principles calculations are carried out to study the photocatalytic water-splitting performance of single-layer GaInSe3 under biaxial strains from -2% to +2%. Calculations reveal that single-layer GaInSe3 under various biaxial strains has electronic bandgaps ranging from 1.11 to 1.28 eV under biaxial strain from -2% to +2%, as well as a completely separated valence band maximum and conduction band minimum. Meanwhile, the appropriate band edges for water-splitting and visible optical absorption up to ~3 × 105 cm-1 are obtained under biaxial strains from -2% to 0%. More impressively, the solar conversion efficiency of single-layer GaInSe3 under biaxial strains from -2% to 0% reaches over 30%. The OER of unstrained single-layer GaInSe3 can proceed without co-catalysts. These demonstrate that single-layer GaInSe3 is a viable material for solar water-splitting.

| S-EPMC10574629 | biostudies-literature

Heteroepitaxial MOF-on-MOF Photocatalyst for Solar-Driven Water Splitting.

Project description:Assembly of different metal-organic frameworks (MOFs) into hybrid MOF-on-MOF heterostructures has been established as a promising approach to develop synergistic performances for a variety of applications. Here, we explore the performance of a MOF-on-MOF heterostructure by epitaxial growth of MIL-88B(Fe) onto UiO-66(Zr)-NH2 nanoparticles. The face-selective design and appropriate energy band structure alignment of the selected MOF constituents have permitted its application as an active heterogeneous photocatalyst for solar-driven water splitting. The composite achieves apparent quantum yields for photocatalytic overall water splitting at 400 and 450 nm of about 0.9%, values that compare much favorably with previous analogous reports. Understanding of this high activity has been gained by spectroscopic and electrochemical characterization together with scanning transmission and transmission electron microscopy (STEM, TEM) measurements. This study exemplifies the possibility of developing a MOF-on-MOF heterostructure that operates under a Z-scheme mechanism and exhibits outstanding activity toward photocatalytic water splitting under solar light.

| S-EPMC11308772 | biostudies-literature

Transferred monolayer MoS2 onto GaN for heterostructure photoanode: Toward stable and efficient photoelectrochemical water splitting.

Project description:Solar-driven photoelectrochemical water splitting (PEC-WS) using semiconductor photoelectrodes is considered a promising solution for sustainable, renewable, clean, safe and alternative energy sources such as hydrogen. Here, we report the synthesis and characterization of a novel heterostructure MoS2/GaN to be used as a photoanode for PEC-WS. The heterostructure was synthesized by metal-organic chemical vapor deposition of single crystalline GaN onto a c-plane sapphire substrate, followed by the deposition of a visible light responding MoS2 monolayer (Eg = 1.9 eV) formed by a Mo-sulfurization technique. Our experimental results reveal that MoS2/GaN photoanode achieved efficient light harvesting with photocurrent density of 5.2 mA cm-2 at 0 V vs Ag/AgCl, which is 2.6 times higher than pristine GaN. Interestingly, MoS2/GaN exhibited a significantly enhanced applied-bias-photon-to-current conversion efficiency of 0.91%, whereas reference GaN yielded an efficiency of 0.32%. The superior PEC performance of the MoS2/GaN photoelectrode is mainly related to the enhanced light absorption due to excellent photocatalytic behavior of MoS2, which reduces charge transfer resistance between the semiconductor and electrolyte interface, and the improvement of charge separation and transport. This result gives a new perspective on the importance of MoS2 as a cocatalyst coated onto GaN to synthesize photoelectrodes for efficient solar energy conversion devices.

| S-EPMC6934777 | biostudies-literature

Efficient and stable visible-light-driven Z-scheme overall water splitting using an oxysulfide H2 evolution photocatalyst.

Project description:So-called Z-scheme systems permit overall water splitting using narrow-bandgap photocatalysts. To boost the performance of such systems, it is necessary to enhance the intrinsic activities of the hydrogen evolution photocatalyst and oxygen evolution photocatalyst, promote electron transfer from the oxygen evolution photocatalyst to the hydrogen evolution photocatalyst, and suppress back reactions. The present work develop a high-performance oxysulfide photocatalyst, Sm2Ti2O5S2, as an hydrogen evolution photocatalyst for use in a Z-scheme overall water splitting system in combination with BiVO4 as the oxygen evolution photocatalyst and reduced graphene oxide as the solid-state electron mediator. After surface modifications of the photocatalysts to promote charge separation and redox reactions, this system is able to split water into hydrogen and oxygen for more than 100 hours with a solar-to-hydrogen energy conversion efficiency of 0.22%. In contrast to many existing photocatalytic systems, the water splitting activity of the present system is only minimally reduced by increasing the background pressure to 90 kPa. These results suggest characteristics suitable for applications under practical operating conditions.

| S-EPMC10776739 | biostudies-literature

Monolayer Fullerene Networks as Photocatalysts for Overall Water Splitting.

Project description:Photocatalytic water splitting can produce hydrogen in an environmentally friendly way and provide alternative energy sources to reduce global carbon emissions. Recently, monolayer fullerene networks have been successfully synthesized [Hou et al. Nature2022, 606, 507], offering new material candidates for photocatalysis because of their large surface area with abundant active sites, feasibility to be combined with other 2D materials to form heterojunctions, and the C60 cages for potential hydrogen storage. However, efficient photocatalysts need a combination of a suitable band gap and appropriate positions of the band edges with sufficient driving force for water splitting. In this study, I employ semilocal density functional theory and hybrid functional calculations to investigate the electronic structures of monolayer fullerene networks. I find that only the weakly screened hybrid functional, combined with time-dependent Hartree-Fock calculations to include the exciton binding energy, can reproduce the experimentally obtained optical band gap of monolayer C60. All the phases of monolayer fullerene networks have suitable band gaps with high carrier mobility and appropriate band edges to thermodynamically drive overall water splitting. In addition, the optical properties of monolayer C60 are studied, and different phases of fullerene networks exhibit distinct absorption and recombination behavior, providing unique advantages either as an electron acceptor or as an electron donor in photocatalysis.

| S-EPMC9634807 | biostudies-literature

Ultrasonically prepared photocatalyst of W/WO3 nanoplates with WS2 nanosheets as 2D material for improving photoelectrochemical water splitting.

Project description:A sonochemical treatment has been an emerged technique as an interesting method for fabricating different photocatalysts with unique photoelectrochemical (PEC) properties. This study investigated the PEC performance of WO3 with WS2 nanosheets as a 2D material before calcination (WO3/WS2-90) and after calcination (WO3/WS2-450) prepared with sonochemical treatment. The WS2 nanosheets were prepared from a liquid exfoliation phase with few-layer nanosheets, approximately 6.5 nm in thickness. The nanosheets were confirmed by UV-Vis spectroscopy and atomic force microscopy. Further, XPS, RAMAN, and SEM-EDAX analyses indicated that, following calcination of the WO3/WS2 electrode, the WS2 nanosheets initially transformed to 2D-WO3. After depositing the WS2 nanosheets on the WO3, the photocurrent density increased substantially. The WO3/WS2-450 films after calcination showed a photocurrent density of 5.6 mA.cm-2 at 1.23 V vs. Ag/AgCl, which was 3.1 and 7.2 times higher, respectively than those of the WO3/WS2-90 before calcination and pure WO3. Mott-Schottky and electrochemical impedance spectroscopy analyses confirmed the fabrication of the WO3/WS2 photoanode after calcination. The deposition of WS2 nanosheets onto pure WO3 increased the donor concentration (24-fold), reduced the space charge layer (4.6-fold), and decreased the flat band potential (1.6-fold), which could all help improve the photoelectrochemical efficiency. Moreover, the incorporation of WO3 with WS2 nanosheets as a 2D material (WO3/WS2-450) enhanced the incident photon current efficiency (IPCE) by 55%. In addition, the applied-bias photon-to-current conversion efficiency of the WO3/WS2-450 films was approximately 2.26% at 0.75 V (vs. Ag/AgCl), which is 5.6 and 9 times higher, respectively than those of WO3/WS2-90 and pure WO3.

| S-EPMC7786633 | biostudies-literature

Design of a Silicon Photocatalyst for High-Efficiency Photocatalytic Water Splitting.

Project description:Metallurgical silicon was studied for photocatalytic H2 evolution activity. It has been found that metallurgical silicon with large particle size (above 800 nm) possesses poor photocatalytic activity because of the deteriorating photoelectric performance of the low-purity silicon. After size reduction (around 400 nm) and metal nanoparticle decoration, the photocatalytic performance was significantly enhanced to 1003.3 μmol·g-1·h-1. However, the photocatalytic performance of the Cu-, Ag-, and Pt-decorated silicon is degraded with the increase of time. Moreover, the degradation is independent of the metal. Electrochemical test and X-ray photoelectron spectroscopy suggested that the Mott-Schottky effect in the metal-silicon contact should be responsible for the degradation. After forming a heterojunction by vulcanizing the Ag-decorated silicon, the degradation was suppressed. Upgradation of the metal-silicon contact to form a heterojunction was a promising way to suppress the degradation and retain the high photocatalytic performance.

| S-EPMC7114140 | biostudies-literature