Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Molybdenum Oxide Supported on Ti₃AlC₂ is an Active Reverse Water-Gas Shift Catalyst.

ABSTRACT: MAX phases are layered ternary carbides or nitrides that are attractive for catalysis applications due to their unusual set of properties. They show high thermal stability like ceramics, but they are also tough, ductile, and good conductors of heat and electricity like metals. Here, we study the potential of the Ti₃AlC₂ MAX phase as a support for molybdenum oxide for the reverse water-gas shift (RWGS) reaction, comparing this new catalyst to more traditional materials. The catalyst showed higher turnover frequency values than MoO₃/TiO₂ and MoO₃/Al₂O₃ catalysts, due to the outstanding electronic properties of the Ti₃AlC₂ support. We observed a charge transfer effect from the electronically rich Ti₃AlC₂ MAX phase to the catalyst surface, which in turn enhances the reducibility of MoO₃ species during reaction. The redox properties of the MoO₃/Ti₃AlC₂ catalyst improve its RWGS intrinsic activity compared to TiO₂- and Al₂O₃-based catalysts.

SUBMITTER: Ronda-Lloret M

PROVIDER: S-EPMC8045458 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Butane Dry Reforming Catalyzed by Cobalt Oxide Supported on Ti2 AlC MAX Phase.

Project description:MAX (Mn+1 AXn ) phases are layered carbides or nitrides with a high thermal and mechanical bulk stability. Recently, it was shown that their surface structure can be modified to form a thin non-stoichiometric oxide layer, which can catalyze the oxidative dehydrogenation of butane. Here, the use of a Ti2 AlC MAX phase as a support for cobalt oxide was explored for the dry reforming of butane with CO2 , comparing this new catalyst to more traditional materials. The catalyst was active and selective to synthesis gas. Although the surface structure changed during the reaction, the activity remained stable. Under the same conditions, a titania-supported cobalt oxide catalyst gave low activity and stability due to the agglomeration of cobalt oxide particles. The Co3 O4 /Al2 O3 catalyst was active, but the acidic surface led to a faster deactivation. The less acidic surface of the Ti2 AlC was better at inhibiting coke formation. Thanks to their thermal stability and acid-base properties, MAX phases are promising supports for CO2 conversion reactions.

| S-EPMC7756845 | biostudies-literature

Reverse water gas-shift reaction product driven dynamic activation of molybdenum nitride catalyst surface.

Project description:In heterogeneous catalysis catalyst activation is often observed during the reaction process, which is mostly attributed to the induction by reactants. In this work we report that surface structure of molybdenum nitride (MoNx) catalyst exhibits a high dependency on the partial pressure or concentration of reaction products i.e., CO and H2O in reverse water gas-shift reaction (RWGS) (CO2:H2 = 1:3) but not reactants of CO2 and H2. Molybdenum oxide (MoOx) overlayers formed by oxidation with H2O are observed at reaction pressure below 10 mbar or with low partial pressure of CO/H2O products, while CO-induced surface carbonization happens at reaction pressure above 100 mbar and with high partial pressure of CO/H2O products. The reaction products induce restructuring of MoNx surface into more active molybdenum carbide (MoCx) to increase the reaction rate and make for higher partial pressure CO, which in turn promote further surface carbonization of MoNx. We refer to this as the positive feedback between catalytic activity and catalyst activation in RWGS, which should be widely present in heterogeneous catalysis.

| S-EPMC11271606 | biostudies-literature

Lattice oxygen self-spillover on reducible oxide supported metal cluster: the water-gas shift reaction on Cu/CeO2 catalyst.

Project description:In this work we have tackled one of the most challenging problems in nanocatalysis namely understanding the role of reducible oxide supports in metal catalyzed reactions. As a prototypical example, the very well-studied water gas shift reaction catalyzed by CeO2 supported Cu nanoclusters is chosen to probe how the reducible oxide support modifies the catalyst structures, catalytically active sites and even the reaction mechanisms. By employing density functional theory calculations in conjunction with a genetic algorithm and ab initio molecular dynamics simulations, we have identified an unprecedented spillover of the surface lattice oxygen from the ceria support to the Cu cluster, which is rarely considered previously but may widely exist in oxide supported metal catalysts under realistic conditions. The oxygen spillover causes a highly energetic preference of the monolayered configuration of the supported Cu nanocluster, compared to multilayered configurations. Due to the strong metal-oxide interaction, after the O spillover the monolayered cluster is highly oxidized by transferring electrons to the Ce 4f orbitals. The water-gas-shift reaction is further found to more favorably take place on the supported copper monolayer than the copper-ceria periphery, where the on-site oxygen and the adjacent oxidized Cu sites account for the catalytically active sites, synergistically facilitating the water dissociation and the carboxyl formation. The present work provides mechanistic insights into the strong metal-support interaction and its role in catalytic reactions, which may pave a way towards the rational design of metal-oxide catalysts with promising stability, dispersion and catalytic activity.

| S-EPMC8208302 | biostudies-literature

Single-Atom Platinum Catalyst for Efficient CO2 Conversion via Reverse Water Gas Shift Reaction.

Project description:The need to tackle CO2 emissions arising from the continuously rising combustion of fossil fuels has sparked considerable interest in investigating the reverse water gas shift (RWGS) reaction. This reaction holds great promise as an alternative technique for the conversion and utilization of CO2. In this study, a scalable method was employed to synthesize a single-atom Pt catalyst, uniformly dispersed on SiC, where up to 6.4 wt% Pt1 was loaded onto a support based on ligand modification and UV photoreduction. This Pt1/SiC catalyst exhibited a high selectivity (100%) towards the RWGS reaction; 54% CO2 conversion was observed at 900 °C with a H2/CO2 feed-in ratio of 1:1, significantly higher than the conventional Pt nanoparticle counterparts. Moreover, Pt1/SiC displayed a robust stability during the long-term test. The activation energy with as-synthesized Pt1/SiC was further calculated to be 61.6 ± 6.4 kJ/mol, which is much lower than the 91.6 ± 15.9 kJ/mol of the Pt nanoparticle counterpart and other Pt-based catalysts reported so far. This work offers new insights into the utilization of diverse single-atom catalysts for the RWGS reaction and other crucial catalytic processes, paving the way for the further exploration and application of SACs in various industrial endeavors.

| S-EPMC10534439 | biostudies-literature

The Ti3 AlC2 MAX Phase as an Efficient Catalyst for Oxidative Dehydrogenation of n-Butane.

Project description:Dehydrogenation or oxidative dehydrogenation (ODH) of alkanes to produce alkenes directly from natural gas/shale gas is gaining in importance. Ti3 AlC2 , a MAX phase, which hitherto had not been used in catalysis, efficiently catalyzes the ODH of n-butane to butenes and butadiene, which are important intermediates for the synthesis of polymers and other compounds. The catalyst, which combines both metallic and ceramic properties, is stable for at least 30 h on stream, even at low O2 :butane ratios, without suffering from coking. This material has neither lattice oxygens nor noble metals, yet a unique combination of numerous defects and a thin surface Ti1-y Aly O2-y/2 layer that is rich in oxygen vacancies makes it an active catalyst. Given the large number of compositions available, MAX phases may find applications in several heterogeneously catalyzed reactions.

| S-EPMC5817242 | biostudies-literature

Praseodymia-titania mixed oxide supported gold as efficient water gas shift catalyst: modulated by the mixing ratio of oxides.

Project description:Modulating the active sites for controllable tuning of the catalytic activity has been the goal of much research, however, this remains challenging. The O vacancy is well known as an active site in reducible oxides. To modify the activity of O vacancies in praseodymia, we synthesized a series of praseodymia-titania mixed oxides. Varying the Pr : Ti mole ratio (2 : 1, 1 : 2, 1 : 1, 1 : 4) allows us to control the electronic interactions between Au, Pr and Ti cations and the local chemical environment of the O vacancies. These effects have been studied study by X-ray photoelectron spectroscopy (XPS), CO diffuse reflectance Fourier transform infrared spectroscopy (CO-DRIFTS) and temperature-programmed reduction (CO-TPR, H2-TPR). The water gas shift reaction (WGSR) was used as a benchmark reaction to test the catalytic performance of different praseodymia-titania supported Au. Among them, Au/Pr1Ti2O x was identified to exhibit the highest activity, with a CO conversion of 75% at 300 °C, which is about 3.7 times that of Au/TiO2 and Au/PrO x . The Au/Pr1Ti2O x also exhibited excellent stability, with the conversion after 40 h time-on-stream at 300 °C still being 67%. An optimal ratio of Pr content (Pr : Ti 1 : 2) is necessary for improving the surface oxygen mobility and oxygen exchange capability, a higher Pr content leads to more O vacancies, however with lower activity. This study presents a new route for modulating the active defect sites in mixed oxides which could also be extended to other heterogeneous catalysis systems.

| S-EPMC8981221 | biostudies-literature

Supported Nanostructured MoxC Materials for the Catalytic Reduction of CO2 through the Reverse Water Gas Shift Reaction.

Project description:MoxC-based catalysts supported on γ-Al2O3, SiO2 and TiO2 were prepared, characterized and studied in the reverse water gas shift (RWGS) at 548-673 K and atmospheric pressure, using CO2:H2 = 1:1 and CO2:H2 = 1:3 mol/mol reactant mixtures. The support used determined the crystalline MoxC phases obtained and the behavior of the supported nanostructured MoxC catalysts in the RWGS. All catalysts were active in the RWGS reaction under the experimental conditions used; CO productivity per mol of Mo was always higher than that of unsupported Mo2C prepared using a similar method in the absence of support. The CO selectivity at 673 K was above 94% for all the supported catalysts, and near 99% for the SiO2-supported. The MoxC/SiO2 catalyst, which contains a mixture of hexagonal Mo2C and cubic MoC phases, exhibited the best performance for CO production.

| S-EPMC9506042 | biostudies-literature

Synthesis of a Graphene-Encapsulated Fe3C/Fe Catalyst Supported on Sporopollenin Exine Capsules and Its Use for the Reverse Water-Gas Shift Reaction.

Project description:Bioderived materials have emerged as sustainable catalyst supports for several heterogeneous reactions owing to their naturally occurring hierarchal pore size distribution, high surface area, and thermal and chemical stability. We utilize sporopollenin exine capsules (SpECs), a carbon-rich byproduct of pollen grains, composed primarily of polymerized and cross-linked lipids, to synthesize carbon-encapsulated iron nanoparticles via evaporative precipitation and pyrolytic treatments. The composition and morphology of the macroparticles were influenced by the precursor iron acetate concentration. Most significantly, the formation of crystalline phases (Fe3C, α-Fe, and graphite) detected via X-ray diffraction spectroscopy showed a critical dependence on iron loading. Significantly, the characteristic morphology and structure of the SpECs were largely preserved after high-temperature pyrolysis. Analysis of Brunauer-Emmett-Teller surface area, the D and G bands from Raman spectroscopy, and the relative ratio of the C=C to C-C bonding from high-resolution X-ray photoelectron spectroscopy suggests that porosity, surface area, and degree of graphitization were easily tuned by varying the Fe loading. A mechanism for the formation of crystalline phases and meso-porosity during the pyrolysis process is also proposed. SpEC-Fe10% proved to be highly active and selective for the reverse water-gas shift reaction at high temperatures (>600 °C).

| S-EPMC10630965 | biostudies-literature

Systematic Investigation on Supported Gold Catalysts Prepared by Fluorine-Free Basic Etching Ti3AlC2 in Selective Oxidation of Aromatic Alcohols to Aldehydes.

Project description:Conventional methods to prepare supported metal catalysts are chemical reduction and wet impregnation. This study developed and systematically investigated a novel reduction method based on simultaneous Ti3AlC2 fluorine-free etching and metal deposition to prepare gold catalysts. The new series of Aupre/Ti3AlxC2Ty catalysts were characterized by XRD, XPS, TEM, and SEM and were tested in the selective oxidation of representative aromatic alcohols to aldehydes. The catalytic results demonstrate the effectiveness of the preparation method and better catalytic performances of Aupre/Ti3AlxC2Ty, compared with those of catalysts prepared by traditional methods. Moreover, this work presents a comprehensive study on the influence of calcination in air, H2, and Ar, and we found that the catalyst of Aupre/Ti3AlxC2Ty-Air600 obtained by calcination in air at 600 °C performed the best, owing to the synergistic effect between tiny surface TiO2 species and Au NPs. The tests of reusability and hot filtration confirmed the catalyst stability.

| S-EPMC10143880 | biostudies-literature

Unlocking the Catalytic Potential of TiO2-Supported Pt Single Atoms for the Reverse Water-Gas Shift Reaction by Altering Their Chemical Environment.

Project description:Single-atom catalysts (SACs) often exhibit dynamic responses to the reaction and pretreatment environment that affect their activity. The lack of understanding of these behaviors hinders the development of effective, stable SACs, and makes their investigations rather difficult. Here we report a reduction-oxidation cycle that induces nearly 5-fold activity enhancement on Pt/TiO2 SACs for the reverse water-gas shift (rWGS) reaction. We combine microscopy (STEM) and spectroscopy (XAS and IR) studies with kinetic measurements, to convincingly show that the low activity on the fresh SAC is a result of limited accessibility of Pt single atoms (Pt1) due to high Pt-O coordination. The reduction step mobilizes Pt1, forming small, amorphous, and unstable Pt aggregates. The reoxidation step redisperses Pt into Pt1, but in a new, less O-coordinated chemical environment that makes the single metal atoms more accessible and, consequently, more active. After the cycle, the SAC exhibits superior rWGS activity to nonatomically dispersed Pt/TiO2. During the rWGS, the activated Pt1 experience slow deactivation, but can be reactivated by mild oxidation. This work demonstrates a clear picture of how the structural evolution of Pt/TiO2 SACs leads to ultimate catalytic efficiency, offering desired understanding on the rarely explored dynamic chemical environment of supported single metal atoms and its catalytic consequences.

| S-EPMC8395703 | biostudies-literature