Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Comparison of applied torque and energy conversion efficiency between rotational triboelectric nanogenerator and electromagnetic generator.

ABSTRACT: Triboelectric nanogenerator (TENG) is regarded as an equally important mechanical energy harvesting technology as electromagnetic generator (EMG). Here, the input mechanical torques and energy conversion efficiencies of the rotating EMG and TENG are systematically measured, respectively. At constant rotation rates, the input mechanical torque of EMG is balanced by the friction resisting torque and electromagnetic resisting torque, which increases with the increasing rotation rate due to Ampere force. While the input mechanical torque of TENG is balanced by the friction resisting torque and electrostatic resisting torque, which is nearly constant at different rotation rates. The energy conversion efficiency of EMG increases with the increasing input mechanical power, while that of the TENG remains nearly constant. Compared with the EMG, the TENG has a higher conversion efficiency at a low input mechanical power, which demonstrates a remarkable merit of the TENG for efficiently harvesting weak ambient mechanical energy.

SUBMITTER: Xu S

PROVIDER: S-EPMC8050373 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Triboelectric-Electromagnetic Hybrid Generator for Harvesting Blue Energy.

Project description:Progress has been developed in harvesting low-frequency and irregular blue energy using a triboelectric-electromagnetic hybrid generator in recent years. However, the design of the high-efficiency, mechanically durable hybrid structure is still challenging. In this study, we report a fully packaged triboelectric-electromagnetic hybrid generator (TEHG), in which magnets were utilized as the trigger to drive contact-separation-mode triboelectric nanogenerators (CS-TENGs) and coupled with copper coils to operate rotary freestanding-mode electromagnetic generators (RF-EMGs). The magnet pairs that produce attraction were used to transfer the external mechanical energy to the CS-TENGs, and packaging of the CS-TENG part was achieved to protect it from the ambient environment. Under a rotatory speed of 100 rpm, the CS-TENGs enabled the TEHG to deliver an output voltage, current, and average power of 315.8 V, 44.6 μA, and ~ 90.7 μW, and the output of the RF-EMGs was 0.59 V, 1.78 mA, and 79.6 μW, respectively. The cylinder-like structure made the TEHG more easily driven by water flow and demonstrated to work as a practical power source to charge commercial capacitors. It can charge a 33 μF capacitor from 0 to 2.1 V in 84 s, and the stored energy in the capacitor can drive an electronic thermometer and form a self-powered water-temperature sensing system.

| S-EPMC6199107 | biostudies-literature

A Blade-Type Triboelectric-Electromagnetic Hybrid Generator with Double Frequency Up-Conversion Mechanism for Harvesting Breeze Wind Energy.

Project description:Triboelectric nanogenerators (TENGs) have garnered substantial attention in breeze wind energy harvesting. However, how to improve the output performance and reduce friction and wear remain challenging. To this end, a blade-type triboelectric-electromagnetic hybrid generator (BT-TEHG) with a double frequency up-conversion (DFUC) mechanism is proposed. The DFUC mechanism enables the TENG to output a high-frequency response that is 15.9 to 300 times higher than the excitation frequency of 10 to 200 rpm. Coupled with the collisions between tribomaterials, a higher surface charge density and better generating performance are achieved. The magnetization direction and dimensional parameters of the BT-TEHG were optimized, and its generating characteristics under varying rotational speeds and electrical boundary conditions were studied. At wind speeds of 2.2 and 10 m/s, the BT-TEHG can generate, respectively, power of 1.30 and 19.01 mW. Further experimentation demonstrates its capacity to charge capacitors, light up light emitting diodes (LEDs), and power wireless temperature and humidity sensors. The demonstrations show that the BT-TEHG has great potential applications in self-powered wireless sensor networks (WSNs) for environmental monitoring of intelligent agriculture.

| S-EPMC11231971 | biostudies-literature

A Ring-Type Triboelectric Nanogenerator for Rotational Mechanical Energy Harvesting and Self-Powered Rotational Speed Sensing.

Project description:In recent years, sensors have been moving towards the era of intelligence, miniaturization and low power consumption, but the power-supply problem has always been a key issue restricting the popularization and development of machine-mounted sensors on the rotating machinery. Herein, we develop a ring-type triboelectric nanogenerator (R-TENG) that functions as a sustainable power source as well as a self-powered rotational speed sensor for rotating machinery. The R-TENG adopts a freestanding mode and consists of a ring-type container unit, an end cover and polytetrafluoroethylene (PTFE) cylinders. In this study, the influence of the number of cylinders, the PTFE cylinder's diameter and the rotational speed on the electrical output are systematically examined, and the motion law of the PTFE cylinders in the container is revealed by the experimental results and verified by kinetic simulation. At a rotational speed of 400 rpm, the output voltage, current and transferred charge of the designed R-TENG reached 138 V, 115 nC and 2.03 μA, respectively. This study provides an attractive power supply strategy for machine-mounted sensors of the rotating machinery, and the rotational speed measurement test also suggests the potential application of the R-TENG as a self-powered rotational speed sensor.

| S-EPMC9025401 | biostudies-literature

A Nonresonant Hybridized Electromagnetic-Triboelectric Nanogenerator for Irregular and Ultralow Frequency Blue Energy Harvesting.

Project description:As a promising renewable energy source, it is a challenging task to obtain blue energy, which is irregular and has an ultralow frequency, due to the limitation of technology. Herein, a nonresonant hybridized electromagnetic-triboelectric nanogenerator was presented to efficiently obtain the ultralow frequency energy. The instrument adopted the flexible pendulum structure with a precise design and combined the working principle of electromagnetism and triboelectricity to realize the all-directional vibration energy acquisition successfully. The results confirmed that the triboelectric nanogenerator (TENG) had the potential to deliver the maximum power point of about 470 μW while the electromagnetic nanogenerator (EMG) can provide 523 mW at most. The conversion efficiency of energy of the system reached 48.48%, which exhibited a remarkable improvement by about 2.96 times, due to the elastic buffering effect of the TENG with the double helix structure. Furthermore, its ability to collect low frequency wave energy was successfully proven by a buoy in Jialing River. This woke provides an effective candidate to harvest irregular and ultralow frequency blue energy on a large scale.

| S-EPMC7881767 | biostudies-literature

Self-adaptive rotational electromagnetic energy generation as an alternative to triboelectric and piezoelectric transductions.

Project description:Triboelectric and piezoelectric energy harvesters can hardly power most microelectronic systems. Rotational electromagnetic harvesters are very promising alternatives, but their performance is highly dependent on the varying mechanical sources. This study presents an innovative approach to significantly increase the performance of rotational harvesters, based on dynamic coil switching strategies for optimization of the coil connection architecture during energy generation. Both analytical and experimental validations of the concept of self-adaptive rotational harvester were carried out. The adaptive harvester was able to provide an average power increase of 63.3% and 79.5% when compared to a non-adaptive 16-coil harvester for harmonic translation and harmonic swaying excitations, respectively, and 83.5% and 87.2% when compared to a non-adaptive 8-coil harvester. The estimated energy conversion efficiency was also enhanced from ~80% to 90%. This study unravels an emerging technological approach to power a wide range of applications that cannot be powered by other vibrationally driven harvesters.

| S-EPMC11291956 | biostudies-literature

Effective energy storage from a triboelectric nanogenerator.

Project description:To sustainably power electronics by harvesting mechanical energy using nanogenerators, energy storage is essential to supply a regulated and stable electric output, which is traditionally realized by a direct connection between the two components through a rectifier. However, this may lead to low energy-storage efficiency. Here, we rationally design a charging cycle to maximize energy-storage efficiency by modulating the charge flow in the system, which is demonstrated on a triboelectric nanogenerator by adding a motion-triggered switch. Both theoretical and experimental comparisons show that the designed charging cycle can enhance the charging rate, improve the maximum energy-storage efficiency by up to 50% and promote the saturation voltage by at least a factor of two. This represents a progress to effectively store the energy harvested by nanogenerators with the aim to utilize ambient mechanical energy to drive portable/wearable/implantable electronics.

| S-EPMC4793045 | biostudies-literature

Theoretical System of Contact-Mode Triboelectric Nanogenerators for High Energy Conversion Efficiency.

Project description:As the rapid expansion of next-generation electronics, portable and efficient energy sources has become one of the most important factors impeding the market development. Triboelectric nanogenerators (TENGs) are a potential candidate for its unsurpassed features. Herein, we deeply analyzed the power and conversion efficiency of contact-mode TENGs considering the whole energy conversion process. Firstly, reaching beyond the conventional analysis, a compressive force was introduced to derive a more versatile motion profile, which provided a better understanding of the working principle of contact-separation process. Then, we deeply analyzed the influence of various parameters on its performance. Especially, the maximum efficiency TENGs can be obtained under optimum force. It is realistic and useful for more efficient TENGs. Furthermore, this research stands a good chance of establishing standards for quantifying the efficiency of TENGs, which lays the basis for the further industrialization and multi-functionization of TENGs technology.

| S-EPMC6207610 | biostudies-literature

Triboelectric Nanogenerator versus Piezoelectric Generator at Low Frequency (<4 Hz): A Quantitative Comparison.

Project description:Triboelectric nanogenerators (TENGs) and piezoelectric generators (PGs) are generally considered the two most common approaches for harvesting ambient mechanical energy that is ubiquitous in our everyday life. The main difference between the two generators lies in their respective working frequency range. Despite the remarkable progress, there has been no quantitative studies on the operating frequency band of the two generators at frequency values below 4 Hz, typical of human motion. Here, the two generators are systematically compared based on their energy harvesting capabilities below 4 Hz. Unlike PGs, the TENG demonstrates higher power performance and is almost independent of the operating frequency, making it highly efficient for multi-frequency operation. In addition, PGs were shown to be inapplicable for charging capacitors when a rectifier was attached to the system. The results of this work reveal the tremendous potential of flexible TENGs for harvesting energy at low frequency.

| S-EPMC7334414 | biostudies-literature

A high-performance triboelectric-electromagnetic hybrid wind energy harvester based on rotational tapered rollers aiming at outdoor IoT applications.

Project description:This article proposed a high-performance triboelectric-electromagnetic hybrid wind energy harvester (WEH). By adopting the revolution and rotation movements of tapered rollers, which serve as both the rotor of the electromagnetic generator (EMG) part and freestanding layers of the triboelectric nanogenerator (TENG) part, the WEH can work as a sustainable power source and a self-powered wind speed sensor. When the wind speed is 12 m/s, super-high open-circuit voltage peaks of 47.4 and 683 V can be achieved by the EMG and TENG, respectively, corresponding to the high-power outputs of 62 and 1.8 mW. It was demonstrated that the WEH can easily light up over 600 red light-emitting diodes and even a 5-W globe light. A self-powered wireless temperature and humidity sensing network was also systematically demonstrated. In summary, the proposed WEH exhibits bright future toward IoT applications, such as in border detection, smart buildings, and so on.

| S-EPMC8041867 | biostudies-literature

Corrugated Textile based Triboelectric Generator for Wearable Energy Harvesting.

Project description:Triboelectric energy harvesting has been applied to various fields, from large-scale power generation to small electronics. Triboelectric energy is generated when certain materials come into frictional contact, e.g., static electricity from rubbing a shoe on a carpet. In particular, textile-based triboelectric energy-harvesting technologies are one of the most promising approaches because they are not only flexible, light, and comfortable but also wearable. Most previous textile-based triboelectric generators (TEGs) generate energy by vertically pressing and rubbing something. However, we propose a corrugated textile-based triboelectric generator (CT-TEG) that can generate energy by stretching. Moreover, the CT-TEG is sewn into a corrugated structure that contains an effective air gap without additional spacers. The resulting CT-TEG can generate considerable energy from various deformations, not only by pressing and rubbing but also by stretching. The maximum output performances of the CT-TEG can reach up to 28.13 V and 2.71 μA with stretching and releasing motions. Additionally, we demonstrate the generation of sufficient energy from various activities of a human body to power about 54 LEDs. These results demonstrate the potential application of CT-TEGs for self-powered systems.

| S-EPMC5368658 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data