Dataset Information

Occurrence of Lead and Other Toxic Metals Derived from Drinking-Water Systems in Three West African Countries.

ABSTRACT:

Background

Exposure to toxic metals (TMs) such as lead can cause lifelong neurodevelopmental impairment and other adverse outcomes. TMs enter drinking water from human activity, geogenic contamination, and corrosion of water system components. Several studies report TM contamination in piped systems and private wells in high-income countries (HICs). However, few robust studies report on TM contamination in low- and middle-income countries (LMICs).

Objectives

We characterized the occurrence and investigated sources of TM contamination in 261 rural water systems in three West African LMICs to inform prevention and management.

Methods

Water samples were collected from 261 community water systems (handpumps and public taps) across rural Ghana, Mali, and Niger. Scrapings were collected from accessible components of a subset of these systems using a drill with acid-washed diamond-tipped bits. Samples were analyzed by inductively coupled plasma (ICP) mass spectrometry or ICP optical emission spectroscopy.

Results

Of the TMs studied, lead most frequently occurred at levels of concern in sampled water system components and water samples. Lead mass fractions exceeded International Plumbing Code (IPC) recommended limits (0.25% wt/wt) for components in 82% (107/130) of systems tested; brass components proved most problematic, with 72% (26/36) exceeding IPC limits. Presence of a brass component in a water system increased expected lead concentrations in drinking-water samples by 3.8 times. Overall, lead exceeded World Health Organization (WHO) guideline values in 9% (24/261) of drinking-water samples across countries; these results are broadly comparable to results observed in many HICs. Results did not vary significantly by geography or system type.

Discussion

Ensuring use of lead-free (<0.25%) components in new water systems and progressively remediating existing systems could reduce drinking-water lead exposures and improve health outcomes for millions. However, reflexive decommissioning of existing systems may deprive users of sufficient water for health or drive them to riskier sources. Because supply chains for many water system components are global, TM monitoring, prevention, and management may be warranted in other LMICs beyond the study area as well. https://doi.org/10.1289/EHP7804.

SUBMITTER: Fisher MB

PROVIDER: S-EPMC8057680 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BackgroundWater quality in the drinking water system (DWS) plays an important role in the general health and performance of broiler chickens. Conditions in the DWS of broilers are ideal for microbial biofilm formation. Since pathogens might reside within these biofilms, they serve as potential source of waterborne transmission of pathogens to livestock and humans. Knowledge about the presence, importance and composition of biofilms in the DWS of broilers is largely missing. In this study, we therefore aim to monitor the occurrence, and chemically and microbiologically characterise biofilms in the DWS of five broiler farms.ResultsThe bacterial load after disinfection in DWSs was assessed by sampling with a flocked swab followed by enumerations of total aerobic flora (TAC) and Pseudomonas spp. The dominant flora was identified and their biofilm-forming capacity was evaluated. Also, proteins, carbohydrates and uronic acids were quantified to analyse the presence of extracellular polymeric substances of biofilms. Despite disinfection of the water and the DWS, average TAC was 6.03 ± 1.53 log CFU/20cm2. Enumerations for Pseudomonas spp. were on average 0.88 log CFU/20cm2 lower. The most identified dominant species from TAC were Stenotrophomonas maltophilia, Pseudomonas geniculata and Pseudomonas aeruginosa. However at species level, most of the identified microorganisms were farm specific. Almost all the isolates belonging to the three most abundant species were strong biofilm producers. Overall, 92% of all tested microorganisms were able to form biofilm under lab conditions. Furthermore, 63% of the DWS surfaces appeared to be contaminated with microorganisms combined with at least one of the analysed chemical components, which is indicative for the presence of biofilm.ConclusionsStenotrophomonas maltophilia, Pseudomonas geniculata and Pseudomonas aeruginosa are considered as opportunistic pathogens and could consequently be a potential risk for animal health. Additionally, the biofilm-forming capacity of these organisms could promote attachment of other pathogens such as Campylobacter spp. and Salmonella spp.

Project description:This study investigated the reaction kinetics on the oxidative transformation of lead(ii) minerals by free chlorine (HOCl) and free bromine (HOBr) in drinking water distribution systems. According to chemical equilibrium predictions, lead(ii) carbonate minerals, cerussite PbCO3(s) and hydrocerussite Pb3(CO3)2(OH)2(s), and lead(ii) phosphate mineral, chloropyromorphite Pb5(PO4)3Cl(s) are formed in drinking water distribution systems in the absence and presence of phosphate, respectively. X-ray absorption near edge spectroscopy (XANES) data showed that at pH 7 and a 10 mM alkalinity, the majority of cerussite and hydrocerussite was oxidized to lead(iv) mineral PbO2(s) within 120 minutes of reaction with chlorine (3 : 1 Cl2 : Pb(ii) molar ratio). In contrast, very little oxidation of chloropyromorphite occurred. Under similar conditions, oxidation of lead(ii) carbonate and phosphate minerals by HOBr exhibited a reaction kinetics that was orders of magnitude faster than by HOCl. Their end oxidation products were identified as mainly plattnerite β-PbO2(s) and trace amounts of scrutinyite α-PbO2(s) based on X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS) spectroscopic analysis. A kinetic model was established based on the solid-phase experimental data. The model predicted that in real drinking water distribution systems, it takes 0.6-1.2 years to completely oxidize Pb(ii) minerals in the surface layer of corrosion scales to PbO2(s) by HOCl without phosphate, but only 0.1-0.2 years in the presence of bromide (Br-) due the catalytic effects of HOBr generation. The model also predicts that the addition of phosphate will significantly inhibit Pb(ii) mineral oxidation by HOCl, but only be modestly effective in the presence of Br-. This study provides insightful understanding on the effect of residual disinfectant on the oxidation of lead corrosion scales and strategies to prevent lead release from drinking water distribution systems.