Model of local hydrogen permeability in stainless steel with two coexisting structures.
Ontology highlight
ABSTRACT:
SUBMITTER: Itakura AN
PROVIDER: S-EPMC8058332 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:A/J mice are genetically predisposed to spontaneous and/or chemically-induced lung tumors while C57BL/6J (B6) mice are resistant. This genetic disparity provides a unique scenario to identify molecular mechanisms associated with the lung response to welding fume at the transcriptome level.
2010-04-30 | GSE20174 | GEO
Project description:Stainless steel is widely used in strongly oxidizing hydrogen peroxide (H2O2) environments. It is crucial to study its wear behaviour and failure mode. The tribological properties and oxidation of 304 stainless steel were investigated using a MMW-1 tribo-tester with a three-electrode setup in H2O2 solutions with different concentrations. Corrosion current densities (CCDs), coefficients of frictions (COFs), wear mass losses, wear surface topographies, and metal oxide films were analysed and compared. The results show that the wear process and oxidation process interacted significantly with each other. Increasing the concentration of H2O2 or the oxidation time was useful to form a layer of integrated, homogeneous, compact and thick metal oxide film. The dense metal oxide films with higher mechanical strengths improved the wear process and also reduced the oxidation reaction. The wear process removed the metal oxide films to increase the oxidation reaction. Theoretical data is provided for the rational design and application of friction pairs in oxidation corrosion conditions.
| S-EPMC5443796 | biostudies-literature
Project description:Two-dimensional (2D) materials have elicited considerable interest in the past decade due to a diverse array of novel properties ranging from high surface to mass ratios, a wide range of band gaps (insulating boron nitride (BN) to semiconducting transition metal dichalcogenides), high mechanical strength and chemical stability. Given the superior chemo-thermo-mechanical properties, 2D materials may provide transformative solution to a familiar yet persistent problem of significant socio-economic burden: the corrosion of stainless steel (SS). With this broader perspective, we investigate corrosion resistance properties of SS-coated with 2D nanomaterials; molybdenum disulfide (MoS2), BN, bulk graphite in 3.5 wt% aqueous NaCl solution. The nanosheets were prepared by a novel liquid phase exfoliation technique and the coatings were made by a paint brush to achieve uniformity. Open circuit potential (OCP) and potentiodynamic plots indicate the best corrosion resistance is provided by the MoS2 coatings. Superior performance of the coating is attributed to low electronic conductivity, large flake size and uniform coverage of SS substrate, which probably impeded the corrosive ions from the solution from diffusing through the coating.
| S-EPMC7211889 | biostudies-literature
Project description:Hydrogen can have an impact on the service life of safety critical components, such as coolant pipes in nuclear reactors, where it may interact with other factors including irradiation. Hence, it is important to characterise such behaviour which in turn requires the capability to charge representative material specimens with hydrogen and to quantity the levels of hydrogen present. Hydrogen concentrations resulting from cathodic charging of 316LN stainless steel over short time periods (< 2 h) were estimated from hydrogen release rates obtained from potentiostatic discharge measurements and used to calibrate simulations based on Fick's second law of diffusion in order to predict the hydrogen concentration after 24 h of charging. Leave-one-out cross-validation was used to establish confidence in results which were also validated using measurements from the melt extraction technique. The success of Fick's second law for estimating escape rates showed that a majority of the absorbed hydrogen was diffusible rather than trapped. These results confirmed that the potentiostatic discharge technique can be used on materials with low diffusivity, and provide a new method through which hydrogen concentrations within a sample can be estimated after cathodic charging non-destructively without the need to remove samples from solution.
| S-EPMC10310816 | biostudies-literature
Project description:In this work, we present laser coloration on 304 stainless steel using nanosecond laser. Surface modifications are tuned by adjusting laser parameters of scanning speed, repetition rate, and pulse width. A comprehensive study of the physical mechanism leading to the appearance is presented. Microscopic patterns are measured and employed as input to simulate light-matter interferences, while chemical states and crystal structures of composites to figure out intrinsic colors. Quantitative analysis clarifies the final colors and RGB values are the combinations of structural colors and intrinsic colors from the oxidized pigments, with the latter dominating. Therefore, the engineering and scientific insights of nanosecond laser coloration highlight large-scale utilization of the present route for colorful and resistant steels.
| S-EPMC5541041 | biostudies-literature
Project description:Cronobacter sakazakii is well-known for its desiccation tolerance in the powdered infant formula (PIF) food production environment and the bacterium has been linked with high fatality rates in neonates who consume contaminated product. In this study, using deep-level RNA-sequencing, differentially expressed genes were studied in C. sakazakii ATCCTM29544 grown in simulated low-moisture environment designed to mimic the PIF production environment. Desiccation of bacteria was carried out on stainless steel coupons from which total RNA was subsequently recovered and sequenced. During 4 h of desiccation from the early stationary phase (ESP) grown culture, an approximately 3 log10 reduction was recorded for C. sakazakii viable cell count, with the largest change in viable cells occurring between desiccation hour 1 and 2 during which the culture medium was completely dried. Transcriptomic data obtained after 4 h of desiccation highlighted several highly-up regulated osmotolerance-related genes which were associated with the secondary response mechanism. These actively expressed genes mainly modulate pathways that synthetize glycine betaine and trehalose as well as the transport of these two and other compatible solutes. Understanding the activities of these genes and pathways will assist the development of technologies that mitigate the survival of C. sakazakii in the PIF production process.
2021-10-04 | GSE129553 | GEO
Project description:Additively manufactured (AM) metallic materials commonly possess substantial microscale internal stresses that manifest as intergranular and intragranular residual stresses. However, the impact of these residual stresses on the mechanical behaviour of AM materials remains unexplored. Here we combine in situ synchrotron X-ray diffraction experiments and computational modelling to quantify the lattice strains in different families of grains with specific orientations and associated intergranular residual stresses in an AM 316L stainless steel under uniaxial tension. We measure pronounced tension-compression asymmetries in yield strength and work hardening for as-printed stainless steel, and show they are associated with back stresses originating from heterogeneous dislocation distributions and resultant intragranular residual stresses. We further report that heat treatment relieves microscale residual stresses, thereby reducing the tension-compression asymmetries and altering work-hardening behaviour. This work establishes the mechanistic connections between the microscale residual stresses and mechanical behaviour of AM stainless steel.
| S-EPMC6761200 | biostudies-literature
Project description:This paper aims to establish the most indicated route to manufacture a nanostructured powder composed of 5 wt% Multi-walled Carbon Nanotubes and 304LSS powder. Four specimens were prepared using Mechanical Alloying and Chemical Treatment (CT) with Hydrogen Peroxide ([Formula: see text]) as the main processes. A thermal treatment post-processing was used in half of the samples to remove the remaining amorphous carbon and to evaluate its effects. Regarding the powder analysis, attachment, amorphous carbon degree, crystallinity, and doping of the CNT throughout the metal matrix were investigated. The nanostructured powders were then inserted as a core in a 304LSS tubular rod to perform the arc welding process. The CT route eliminated the amorphous carbon and generated more refiner grains, which provided a cross-section hardness gain of more than 40% regarding the 304LSS joint. In summary, the CT route, combined with the GTAW process, provided a new method for nanocomposite manufacturing by combining shorter preparation steps, obtaining an improvement in the microstructural and hardness performance.
| S-EPMC7578026 | biostudies-literature
Project description:BackgroundCanine tracheal collapse is a complex airway pathology without promising treatment results. Currently nitinol stents are the best surgical option; however, some professionals are doubting if stent placement is the best option due to the associated complications.ObjectiveDetermine the technical feasibility, safety, and long-term follow-up after the implantation of a new tracheal stent designed for canine tracheal collapse.MethodsThirteen healthy, adult female New Zealander rabbits were involved in this pilot study.A new intra-tracheal device (Reference number 902711 patent registered as CasMin-Twine) was implanted in ten animals. Deployment was performed under general anesthesia, making a puncture incision via a 21 Gauge needle in the intra-tracheal space where the stent was introduced with a screwing process. The device was fixed to the tracheal wall with a non-absorbable suture. Computerized Tomography (CT) and an endoscopy to study structural abnormalities were performed after 30, 90 and 365 days after stent placement.ResultsTechnical and clinical success was 100%. There was no significant change in behavior or respiratory disorders. CT studies showed no significant alterations. After the 30 days, 60% of the animals showed partial endothelization in the endoscopy study, and only one animal still presented partial endothelization after 12 months. Mucus accumulation was only present in 40% of cases and classified as low, without respiratory consequences. Only one animal presented a single granuloma at caudal stent tip.ConclusionsThis new tracheal stent (CasMin-Twine) is an effective and safe procedure with promising results, and also shows the possibility of removing the device after endothelization has been produced. New studies should be carried out to evaluate the effectiveness in patients with tracheomalacia.Clinical significance/impactThis new product can give veterinarians a new option of treatment for this complicated pathology. Minimizing specific equipment for its deployment, CasMin-Twine will be more accessible for all professionals.
| S-EPMC6788445 | biostudies-literature
Project description:In the food industry, the surfaces of processing equipment are considered to be major factors in the risk of food contamination. The cleaning process of solid surfaces is essential, but it requires a significant amount of water and chemicals. Herein, we report the use of foam flows based on alkyl polyglucosides (APGs) to remove spores of Bacillus subtilis on stainless-steel surfaces as the model-contaminated surface. Sodium dodecyl sulfate (SDS) was also studied as an anionic surfactant. Foams were characterized during flows by measuring the foam stability and the bubble size. The efficiency of spores' removal was assessed by enumerations. We showed that foams based on APGs could remove efficiently the spores from the surfaces, but slightly less than foams based on SDS due to an effect of SDS itself on spores removal. The destabilization of the foams at the end of the process and the recovery of surfactant solutions were also evaluated by using filtration. Following a life cycle assessment (LCA) approach, we evaluated the impact of the foam flow on the global environmental footprint of the process. We showed significant environmental impact benefits with a reduction in water and energy consumption for foam cleaning. APGs are a good choice as surfactants as they decrease further the environmental impacts.
| S-EPMC9919089 | biostudies-literature