Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Thermal and anticorrosion properties of polyurethane coatings derived from recycled polyethylene terephthalate and palm olein-based polyols.

ABSTRACT: Polyols of palm olein/polyethylene terephthalate (PET) were synthesized by means of incorporating recycled PET from waste drinking bottles in different proportions into palm olein alkyd in the presence of ethylene glycol. The polyols were characterized by FTIR, and theirs hydroxyl value (OHV), acid value (AV) and viscosity were determined. The formulation of the polyurethane coating was carried out by dissolving the polyol in mixed solvent of cyclohexanone/tetrahydrofuran (THF) (4 : 1) followed by reacting 1 hydroxyl equivalent of the polyol with 1.2 equivalents of methylene diphenyldiisocyanate and 0.05% dibutyltin dilaurate (DBTDL) catalyst. The coating cured through the cross-linking reactions between hydroxyl and isocyanate groups. The formation of urethane linkages was established by FTIR spectroscopy. The set films were characterized by thermal analysis. To study their anticorrosion properties, polarization measurements and EIS in 3.5% NaCl solution were determined. The coatings displayed good thermal stability and anticorrosion properties which were supported by XRD analysis. The PU7 coating, with the highest proportion of PET (up to 15% w/w), displayed significantly improved thermal stability and anticorrosion properties. It is evident that the performance of the polyurethane (PU) coatings could be enhanced by the incorporation of PET.

SUBMITTER: Adamu AA

PROVIDER: S-EPMC8059680 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Thermal, thermomechanical and structural properties of recycled polyethylene terephthalate (rPET)/waste marble dust composites.

Project description:The main objective of this work is to review the capability of using waste marble dust (MD) particles as reinforcing materials in recycled polymeric composites to achieve environmentally friendly materials. In the present study, polymer composites were fabricated from recycled polyethylene terephthalate (rPET) and MD and then analyzed for their structural and thermal properties. Preparation of rPET-based composites containing 0-20 wt% MD was carried out through extrusion and injection molding. For their characterization Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA) were applied. The DSC analysis revealed a nucleating effect of MD on rPET, which was manifested in a higher crystallization temperature (196.7 °C ⇒ 204.4 °C); however, the marble particles were also found to hamper chain mobility, thereby decreasing the crystallinity ratio (23.7 % ⇒ 19.2 %) of rPET and altering its crystalline structure. According to the TGA measurements, a slight increase occurred in the thermal stability of rPET, its major decomposition temperature increased from 446 °C to 451 °C when 20 wt% MD was incorporated into it. DMA showed an improved stiffness in the entire investigated temperature range for MD-filled composites versus neat rPET. Additionally, several factors were derived from the DMA data, including the effectiveness factor, degree of entanglement, and reinforcing efficiency factor which all suggested a decent interaction between the components indicating a proper reinforcing ability of marble powder. However, above 5 wt% MD content the reinforcing efficiency deteriorated due to the agglomeration of filler particles, which was also supported by scanning electron microscopic images.

| S-EPMC10839988 | biostudies-literature

Breathable and wearable graphene/waterborne polyurethane coated regenerated polyethylene terephthalate fabrics for motion sensing and thermal therapy.

Project description:The functional utilization of recycled polymers has emerged as a current prominent and timely subject. Flexible wearable devices with high sensitivity to conductivity have garnered significant attention in the fields of human healthcare monitoring and personal heat management. One significant obstacle that needs to be addressed is the simultaneous maintenance of both sensing functionality and durability in composite fabrics. In this paper, a collection of durable, breathable, and flexible smart fabric was produced using the scratch coating method. The fabrics were created by utilizing a regenerated polyethylene terephthalate fabric as a base material, incorporating graphene microsheets (G) as a conductive agent, and applying a waterborne polyurethane layer as a surface protective coating. Furthermore, an investigation was conducted to assess their sensing performance and electrothermal performance. The composite fabric exhibits significant advantages in terms of high conductivity (592 S/m), wide strain range, high sensitivity (Gauge factor = 6.04) and fantabulous dynamic stability (2000 cycles) at a mass ratio of Graphene/WPU loading of 8:2. These sensors were successfully utilized to monitor various degrees of real-time human body movements, ranging from significant deformation bending of elbows to slight deformation swallowing. Furthermore, the sensors also exhibit a significant electric heating effect. Specifically, when a voltage of 10 V is applied, the sensors can reach a steady state temperature of 53.3 °C within a mere 30 s. This discovery holds potential for the development of wearable heaters that can be used for on-demand thermal therapy, functional protective clothing, and medical electric heating wearables.

| S-EPMC10994883 | biostudies-literature

Anticorrosion, Thermal Degradation, and Hydrophobic Performances of Graphene/TiO2 Nanocomposite Coatings.

Project description:Globally, researchers have devoted consistent efforts to producing excellent coating properties since coating plays an essential role in enhancing electrochemical performance and surface quality. In this study, TiO2 nanoparticles in varying concentrations of 0.5, 1, 2, and 3 wt.% were added into the acrylic-epoxy polymeric matrix with 90:10 wt.% (90A:10E) ratio incorporated with 1 wt.% graphene, to fabricate graphene/TiO2 -based nanocomposite coating systems. Furthermore, the properties of the graphene/TiO2 composites were investigated by Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), ultraviolet-visible (UV-Vis) spectroscopy, water contact angle (WCA) measurements, and cross-hatch test (CHT), respectively. Moreover, the field emission scanning electron microscope (FESEM) and the electrochemical impedance spectroscopy (EIS) tests were conducted to investigate the dispersibility and anticorrosion mechanism of the coatings. The EIS was observed by determining the breakpoint frequencies over a period of 90 days. The results revealed that the TiO2 nanoparticles were successfully decorated on the graphene surface by chemical bonds, which resulted in the graphene/TiO2 nanocomposite coatings exhibiting better dispersibility within the polymeric matrix. The WCA of the graphene/TiO2 coating increased along with the ratio of TiO2 to graphene, achieving the highest CA of 120.85° for 3 wt.% of TiO2. Excellent dispersion and uniform distribution of the TiO2 nanoparticles within the polymer matrix were shown up to 2 wt.% of TiO2 inclusion. Among the coating systems, throughout the immersion time, the graphene/TiO2 (1:1) coating system exhibited the best dispersibility and high impedance modulus values (Z0.01 Hz), exceeding 1010 Ω cm2.

| S-EPMC10255546 | biostudies-literature

Upgrading and Enhancement of Recycled Polyethylene Terephthalate with Chain Extenders: In-Depth Material Characterization.

Project description:Chemical chain extenders (CEs) can be used to restore the properties of recycled low-molecular-weight polyethylene terephthalate (PET). The aim of this work is to investigate the influence of the type and concentration of the CEs Joncryl and pyromellitic dianhydride (PMDA) on the viscosity and other rheological properties with a unique combination of different methods based on industrial samples originating from recycled PET bottles and trays. The resulting chain-extended thermoplastics were characterized by a combination of differential scanning calorimetry, viscometry, cone plate rheometry, pyrolysis-gas chromatography-mass spectroscopy, optical photothermal infrared spectroscopy, 13C solid-state- and 1H NMR liquid spectroscopy, and size exclusion chromatography. For a recycled PET mixture containing bottle and tray materials, our investigations have shown that a significantly better effect for chain elongation can be achieved with Joncryl compared to PMDA. This can presumably be attributed to water molecules formed during the use of PMDA, which accelerate the degradation of PET. The storage modulus values are therefore significantly higher for the samples with Joncryl compared to PMDA. The results of this study show that chain extension with Joncryl proceeds better compared to the reaction with PMDA.

| S-EPMC11261598 | biostudies-literature

Chitosan-Functionalized Recycled Polyethylene Terephthalate Nanofibrous Membrane for Sustainable On-Demand Oil-Water Separation.

Project description:The preservation of marine ecosystems is one of the most severe challenges at present. In particular, oil-water separation from oil spills and oily wastewater is important. For this reason, a low-cost, effective, and sustainable polymeric solution is in high demand. In this work, a controlled-wettability membrane for selective separation of oil-water mixtures and emulsions is developed. The nanofibrous membrane is prepared via a facile and cost-effective electrospinning technique using environmentally sustainable materials, such as recycled polyethylene terephthalate and chitosan. The effect of different concentrations of chitosan on the morphology, chemical composition, mechanical properties, wettability, and separation performance of the membrane is evaluated. The membranes exhibited underoil superhydrophobic and underwater superoleophobic behavior, which is essential to perform the selective separation. In fact, the designed filter has competitive antifouling properties (oil intrusion pressure > 45 kPa) and showed high heavy- and light-oil/water separation efficiencies (>95%) both for emulsions and immiscible mixtures.

| S-EPMC8025399 | biostudies-literature

Preparation and characterization of waterborne alkyd-amino baking coatings based on waste polyethylene terephthalate.

Project description:The recycling of polyethylene terephthalate (PET) is the most attractive method for PET waste management because it not only decreases the load on landfill space, but also provides opportunities for reducing the use of raw petrochemical products. Therefore, in this investigation, neopentyl glycol is used for alcoholysis of waste PET, and glycolyzed PET product was applied for preparation of the waterborne alkyd resin. Furthermore, the waterborne alkyd-amino baking coatings were prepared from the waterborne alkyd based on glycolyzed waste PET and melamine formaldehyde resin and applied on tinplate. The waterborne alkyd-amino resin films showed excellent adhesion, balanced hardness and flexibility, high gloss and outstanding chemical resistance except for alkali resistance owing to hydrolysis of ester bonds.

| S-EPMC7029890 | biostudies-literature

Novel Polyurethanes Based on Recycled Polyethylene Terephthalate: Synthesis, Characterization, and Formulation of Binders for Environmentally Responsible Rocket Propellants.

Project description:Novel polyurethane-based binders, specifically designed for environmentally responsible rocket propellant composites, were obtained by employing the polyester-polyols that resulted from the degradation of polyethylene terephthalate waste. A new class of "greener" rocket propellants, comprising polyurethanes (based on recycled PET) as the binder, phase stabilized ammonium nitrate (PSAN) as the eco-friendly oxidizer, and triethylene glycol dinitrate (TEGDN) as the energetic plasticizer, together with aluminum as fuel and Fe2O3 as the catalyst, is herein reported. The components of the energetic mixtures were investigated (individually and as composite materials) through specific analytical tools: 1H-NMR, FT-IR, SEM-EDX, DTA and TGA, tensile and compression tests, DMA, and micro-CT. Moreover, the feasibility of this innovative solution is sustained by the ballistic performances exhibited by these composite materials in a subscale rocket motor, proving that these new formulations are suitable for rocket propellant applications.

| S-EPMC8587294 | biostudies-literature

Effects of polypropylene, polyvinyl chloride, polyethylene terephthalate, polyurethane, high-density polyethylene, and polystyrene microplastic on Nelumbo nucifera (Lotus) in water and sediment.

Project description:Plastic waste is recognised as hazardous, with the risk increasing as the polymers break down in nature to secondary microplastics or even nanoplastics. The number of studies reporting on the prevalence of microplastic in every perceivable niche and bioavailable to biota is dramatically increasing. Knowledge of the ecotoxicology of microplastic is advancing as well; however, information regarding plants, specifically aquatic macrophytes, is still lacking. The present study aimed to gain more information on the ecotoxicological effects of six different polymer types as 4 mm microplastic on the morphology (germination and growth) and the physiology (catalase and glutathione S-transferase activity) of the rooted aquatic macrophyte, Nelumbo nucifera. The role of sediment was also considered by conducting all exposure both in a sediment-containing and sediment-free exposure system. Polyvinyl chloride and polyurethane exposures caused the highest inhibition of germination and growth compared to the control. However, the presence of sediment significantly decreased the adverse effects. Catalase activity was increased with exposure to polyvinyl chloride, polyurethane, and polystyrene, both in the presence and absence of sediment but more so in the sediment-free system. Glutathione S-transferase activity was significantly increased with exposure to polypropylene, polyvinyl chloride, and polyethylene terephthalate in the sediment-free system and exposure to polyethylene terephthalate and polyurethane in the absence of sediment. There was no clear correlation between the morphological and physiological effects observed. Further studies are required to understand the underlying toxicity mechanism of microplastics.

| S-EPMC8873133 | biostudies-literature

Self-Protecting Epoxy Coatings with Anticorrosion Microcapsules.

Project description:The corrosion of steel substrates causes damage that is costly to repair or replace. Current protective coatings predominately rely on environmentally harmful anticorrosive agents and toxic solvents to protect the underlying substrate. The use of lawsone (2-hydroxy-1,4-napthoquinone) together with a water-based epoxy coating provides an environmentally friendly alternative for common protective coatings. Microencapsulated lawsone embedded in an epoxy coating allows the anticorrosive agent to remain dormant until released by damage and delivered directly onto the steel substrate. UV-vis analysis confirms successful encapsulation of lawsone in a polyurethane shell wall and reveals up to 8 wt % lawsone in the capsule cores. Uniform dry film thickness and inflicted damaged are verified with ultrasound and optical microscopy. Visual and electrochemical analysis demonstrates that this self-protective scheme leads to a 70% corrosion inhibition efficiency in a neutral salt water solution.

| S-EPMC6644468 | biostudies-literature

Use of a Mixture of Polyols Based on Metasilicic Acid and Recycled PLA for Synthesis of Rigid Polyurethane Foams Susceptible to Biodegradation.

Project description:Two polyol raw materials were obtained in the conducted research, one based on metasilicic acid (MSA), the other based on poly(lactic acid) (PLA) waste. The obtained polyols were characterized in terms of their applicability for the production of rigid polyurethane foams (RPUFs). Their basic analytical properties (hydroxyl number, acid number, elemental analysis) and physicochemical properties (density, viscosity) were determined. The assumed chemical structure of the obtained new compounds was confirmed by performing FTIR and 1H NMR spectroscopic tests. Formulations for the synthesis of RPUFs were developed on the basis of the obtained research results. A mixture of polyols based on MSA and PLA in a weight ratio of 1:1 was used as the polyol component in the polyurethane formulation. The reference foam in these tests was a foam that was synthesized only on the basis of MSA-polyol. The obtained RPUFs were tested for basic functional properties (apparent density, compressive strength, water absorption, thermal conductivity coefficient etc.). Susceptibility to biodegradation in soil environment was also tested. It was found that the use of mixture of polyols based on MSA and PLA positively affected the properties of the obtained foam. The polyurethane foam based on this polyol mixture showed good thermal resistance and significantly reduced flammability in comparison with the foam based MSA-polyol. Moreover, it showed higher compressive strength, lower thermal conductivity and biodegradability in soil. The results of the conducted tests confirmed that the new foam was characterized by very good performance properties. In addition, this research provides information on new waste management opportunities and fits into the doctrine of sustainable resource management offered by the circular economy.

| S-EPMC7795053 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data