Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhancing thermoelectric properties of single-walled carbon nanotubes using halide compounds at room temperature and above.

ABSTRACT: Carbon nanotubes (CNTs) are materials with exceptional electrical, thermal, mechanical, and optical properties. Ever since it was demonstrated that they also possess interesting thermoelectric properties, they have been considered a promising solution for thermal energy harvesting. In this study, we present a simple method to enhance their performance. For this purpose, thin films obtained from high-quality single-walled CNTs (SWCNTs) were doped with a spectrum of inorganic and organic halide compounds. We studied how incorporating various halide species affects the electrical conductivity, the Seebeck coefficient, and the Power Factor. Since thermoelectric devices operate under non-ambient conditions, we also evaluated these materials' performance at elevated temperatures. Our research shows that appropriate dopant selection can result in almost fivefold improvement to the Power Factor compared to the pristine material. We also demonstrate that the chemical potential of the starting CNT network determines its properties, which is important for deciphering the true impact of chemical and physical functionalization of such ensembles.

SUBMITTER: Kumanek B

PROVIDER: S-EPMC8060344 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Large positive magnetoresistance in semiconducting single-walled carbon nanotubes at room temperature.

Project description:We have investigated the effect of a magnetic field on the resistance (magnetoresistance, MR) of single-walled carbon nanotube (SWNT) arrays. The SWNT devices consist of a mixture of metallic and semiconducting SWNTs between palladium electrodes. The MR of the devices is studied at room temperature and in the presence of perpendicular magnetic fields up to 0.24 tesla. The resistance increases as the external magnetic field becomes higher, suggesting a positive MR of SWNTs. After etching the metallic SWNTs by electrical breakdown, the MR can be further enhanced. Large positive MR values about 15%, 20% and 25% were found in three different devices at 0.24 tesla for semiconducting SWNTs at room temperature. Our results show potential for the development of magneto-electronic devices that are operable at room temperature.

| S-EPMC9078853 | biostudies-literature

Room temperature amine sensors enabled by sidewall functionalization of single-walled carbon nanotubes.

Project description:A new series of sidewall modified single-walled carbon nanotubes (SWCNTs) with perfluorophenyl molecules bearing carboxylic acid or methyl ester moieties are herein reported. Pristine and functionalized SWCNTs (p-SWCNTs and f-SWCNTs, respectively) were characterized by X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and scanning electron microscopy (SEM). The nitrene-based functionalization provided intact SWCNTs with methyl 4-azido-2,3,5,6-tetrafluorobenzoate (SWCNT-N-C6F4CO2CH3) and 4-azido-2,3,5,6-tetrafluorobenzoic acid (SWCNT-N-C6F4CO2H) attached every 213 and 109 carbon atoms, respectively. Notably, SWCNT-N-C6F4CO2H was sensitive in terms of the percentage of conductance variation from 5 to 40 ppm of ammonia (NH3) and trimethylamine (TMA) with a two-fold higher variation of conductance compared to p-SWCNTs at 40 ppm. The sensors are highly sensitive to NH3 and TMA as they showed very low responses (0.1%) toward 200 ppm of volatile organic compounds (VOCs) containing various functional groups representative of different classes of analytes such as benzene, tetrahydrofurane (THF), hexane, ethyl acetate (AcOEt), ethanol, acetonitrile (CH3CN), acetone and chloroform (CHCl3). Our system is a promising candidate for the realization of single-use chemiresistive sensors for the detection of threshold crossing by low concentrations of gaseous NH3 and TMA at room temperature.

| S-EPMC6390973 | biostudies-literature

Thermoelectric Properties of Thin Films from Sorted Single-Walled Carbon Nanotubes.

Project description:Single-walled carbon nanotubes (SWCNTs) remain one of the most promising materials of our times. One of the goals is to implement semiconducting and metallic SWCNTs in photonics and microelectronics, respectively. In this work, we demonstrated how such materials could be obtained from the parent material by using the aqueous two-phase extraction method (ATPE) at a large scale. We also developed a dedicated process on how to harvest the SWCNTs from the polymer matrices used to form the biphasic system. The technique is beneficial as it isolates SWCNTs with high purity while simultaneously maintaining their surface intact. To validate the utility of the metallic and semiconducting SWCNTs obtained this way, we transformed them into thin free-standing films and characterized their thermoelectric properties.

| S-EPMC7504438 | biostudies-literature

Charge transfer between lead halide perovskite nanocrystals and single-walled carbon nanotubes.

Project description:A charge transfer study between lead halide-based perovskite nanocrystals and single-walled carbon nanotubes (PNC@CNT nanocomposite) was performed. Solution-processed MAPbX3 PNCs displayed very bright luminescence, but it quenched in the presence of CNTs. This was attributed to the electron transfer from PNCs to CNTs. The detailed changes in fluorescence lifetime were investigated through time-correlated single-photon counting (TCSPC), which suggested mixed static and dynamic quenching along with a decrease in the lifetime. Morphological changes were investigated via transmission electron microscopy (TEM) and attributed to the incorporation of PNCs on long CNTs. Also, the PNC@CNT nanocomposite was explored for photoinduced current response, which indicated an ∼3 fold increase in photoconductivity under light illumination (with a 1 mV bias). This electron transfer study between PNCs and CNTs contributes to the exploration of charge dynamics.

| S-EPMC9417507 | biostudies-literature

Systematic conversion of single walled carbon nanotubes into n-type thermoelectric materials by molecular dopants.

Project description:Thermoelectrics is a challenging issue for modern and future energy conversion and recovery technology. Carbon nanotubes are promising active thermoelectic materials owing to their narrow bandgap energy and high charge carrier mobility, and they can be integrated into flexible thermoelectrics that can recover any waste heat. We here report air-stable n-type single walled carbon nanotubes with a variety of weak electron donors in the range of HOMO level between ca. -4.4 eV and ca. -5.6 eV, in which partial uphill electron injection from the dopant to the conduction band of single walled carbon nanotubes is dominant. We display flexible films of the doped single walled carbon nanotubes possessing significantly large thermoelectric effect, which is applicable to flexible ambient thermoelectric modules.

| S-EPMC3840380 | biostudies-literature

ZnO Nanocluster-Functionalized Single-Walled Carbon Nanotubes Synthesized by Microwave Irradiation for Highly Sensitive NO<sub>2</sub> Detection at Room Temperature.

Project description:To improve the NO2-sensing performance of single-walled carbon nanotube (SWCNT)-based sensors, zinc oxide (ZnO) nanoclusters (NCs) were functionalized by a microwave (MW)-assisted synthesis technique. Gas sensors based on pristine SWCNTs and ZnO NC-SWCNT composites synthesized using different weight ratios (ZnO/SWCNTs = 0.5:1, 1:1, 2:1, and 3:1) were fabricated, and their ability to sense various gases at room temperature (25 °C) was investigated. The results showed that the sensing performance of the ZnO NC-SWCNT composite synthesized with a weight ratio of 1:1 (denoted as Z-SWCNTs) was significantly enhanced with respect to NO2 response and selectivity. This enhanced sensing performance is thought to be a result of both the modulation of the conduction channel at the ZnO NC-SWCNT heterointerfaces and the generation of defects (or holes) by MW irradiation that act as active sites for the target gases. The results obtained in this work provide not only a facile method of cofunctionalizing oxide NCs and defects but also a new methodology for improving the sensing capabilities of SWCNT-based gas sensors.

| S-EPMC6648778 | biostudies-literature

Molecular Engineering for Enhanced Thermoelectric Performance of Single-Walled Carbon Nanotubes/π-Conjugated Organic Small Molecule Hybrids.

Project description:Hybridizing single-walled carbon nanotubes (SWCNTs) with π-conjugated organic small molecules (π-OSMs) offers a promising approach for producing high-performance thermoelectric (TE) materials through the facile optimization of the molecular geometry and energy levels of π-OSMs. Designing a twisted molecular structure for the π-OSM with the highest occupied molecular orbital energy level comparable to the valence band of SWCNTs enables effective energy filtering between the two materials. The SWCNTs/twisted π-OSM hybrid exhibits a high Seebeck coefficient of 110.4 ± 2.6 µV K-1 , leading to a significantly improved power factor of 2,136 µW m-1 K-2 , which is 2.6 times higher than that of SWCNTs. Moreover, a maximum figure of merit over 0.13 at room temperature is achieved via the efficient TE transport of the SWCNTs/twisted π-OSM hybrid. The study highlights the promising potential of optimizing molecular engineering of π-OSMs for hybridization with SWCNTs to create next-generation, efficient TE materials.

| S-EPMC10667833 | biostudies-literature

Doping Engineering of Single-Walled Carbon Nanotubes by Nitrogen Compounds Using Basicity and Alignment.

Project description:Charge transport properties in single-walled carbon nanotubes (SWCNTs) can be significantly modified through doping, tuning their electrical and thermoelectric properties. In our study, we used more than 40 nitrogen-bearing compounds as dopants and determined their impact on the material's electrical conductivity. The application of nitrogen compounds of diverse structures and electronic configurations enabled us to determine how the dopant nature affects the SWCNTs. The results reveal that the impact of these dopants can often be anticipated by considering their Hammett's constants and pKa values. Furthermore, the empirical observations supported by first-principles calculations indicate that the doping level can be tuned not only by changing the type and the concentration of dopants but also by varying the orientation of nitrogen compounds around SWCNTs.

| S-EPMC9185683 | biostudies-literature

Enhancing near-infrared photoluminescence from single-walled carbon nanotubes by defect-engineering using benzoyl peroxide.

Project description:Single-walled carbon nanotubes (SWCNTs) have been modified with ester groups using typical organic radical chemistry. Consequently, traps for mobile excitons have been created, which enhanced the optical properties of the material. The proposed methodology combines the benefits of mainstream approaches to create luminescent defects in SWCNTs while it simultaneously avoids their limitations. A step change was achieved when the aqueous medium was abandoned. The selection of an appropriate organic solvent enabled much more facile modification of SWCNTs. The presented technique is quick and versatile as it can engage numerous reactants to tune the light emission capabilities of SWCNTs. Importantly, it can also utilize SWCNTs sorted by chirality using conjugated polymers to enhance their light emission capabilities. Such differentiation is conducted in organic solvents, so monochiral SWCNT can be directly functionalized using the demonstrated concept in the same medium without the need to redisperse the material in water.

| S-EPMC7669876 | biostudies-literature

Carboxylated short single-walled carbon nanotubes but not plain and multi-walled short carbon nanotubes show in vitro genotoxicity.

Project description:Long carbon nanotubes (CNTs) resemble asbestos fibers due to their high length to diameter ratio and they thus have genotoxic effects. Another parameter that might explain their genotoxic effects is contamination with heavy metal ions. On the other hand, short (1-2 µm) CNTs do not resemble asbestos fibers, and, once purified from contaminations, they might be suitable for medical applications. To identify the role of fiber thickness and surface properties on genotoxicity, well-characterized short pristine and carboxylated single-walled (SCNTs) and multi-walled (MCNTs) CNTs of different diameters were studied for cytotoxicity, the cell's response to oxidative stress (immunoreactivity against hemoxygenase 1 and glutathione levels), and in a hypoxanthine guanine phosphoribosyltransferase (HPRT) assay using V79 chinese hamster fibroblasts and human lung adenocarcinoma A549 cells. DNA repair was demonstrated by measuring immunoreactivity against activated histone H2AX protein. The number of micronuclei as well as the number of multinucleated cells was determined. CNTs acted more cytotoxic in V79 than in A549 cells. Plain and carboxylated thin (<8 nm) SCNTs and MCNTs showed greater cytotoxic potential and carboxylated CNTs showed indication for generating oxidative stress. Multi-walled CNTs did not cause HPRT mutation, micronucleus formation, DNA damage, interference with cell division, and oxidative stress. Carboxylated, but not plain, SCNTs showed indication for in vitro DNA damage according to increase of H2AX-immunoreactive cells and HPRT mutation. Although short CNTs presented a low in vitro genotoxicity, functionalization of short SCNTs can render these particles genotoxic.

| S-EPMC4434219 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data