Changes in Skin Barrier Function after Repeated Exposition to Phospholipid-Based Surfactants and Sodium Dodecyl Sulfate In Vivo and Corneocyte Surface Analysis by Atomic Force Microscopy.
Ontology highlight
ABSTRACT:
SUBMITTER: Vater C
PROVIDER: S-EPMC8063842 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Morphological features of the nanoform of a phospholipid composition (NFPh), which can be used as an individual pharmaceutic agent or as a platform for designing drug delivery systems, have been studied using atomic force microscopy (AFM). NFPh has been developed, and its characteristics have been investigated using conventional drug analysis methods, including the determination of the mean diameter of nanosized vesicles in the emulsion via dynamic light scattering (DLS). Using DLS, the mean diameter of the vesicles was found to be ~20 nm. AFM imaging of the surface has revealed four types of objects related to NFPh: (1) compact objects; (2) layer fragments; (3) lamellar structures; and (4) combined objects containing the compact and extended parts. For type (4) objects, it has been found that the geometric ratio of the volume of the convex part to the total area of the entire object is constant. It has been proposed that these objects formed owing to fusion of vesicles of the same size (with the same surface-to-volume ratio). It has been shown that this is possible for vesicles with diameters of 20 nm. This diameter is in good coincidence with the value obtained using DLS.
| S-EPMC10607005 | biostudies-literature
Project description:A previous study, using capillary electrophoresis (CE) [J. Am. Chem. Soc. 2008, 130, 17384-17393], reported that six discrete complexes of ubiquitin (UBI) and sodium dodecyl sulfate (SDS) form at different concentrations of SDS along the pathway to unfolding of UBI in solutions of SDS. One complex (which formed between 0.8 and 1.8 mM SDS) consisted of native UBI associated with approximately 11 molecules of SDS. The current study used CE and (15)N/(13)C-(1)H heteronuclear single quantum coherence (HSQC) NMR spectroscopy to identify residues in folded UBI that associate specifically with SDS at 0.8-1.8 mM SDS, and to correlate these associations with established biophysical and structural properties of this well-characterized protein. The ability of the surface charge and hydrophobicity of folded UBI to affect the association with SDS (at concentrations below the CMC) was studied, using CE, by converting lys-ε-NH(3)(+) to lys-ε-NHCOCH(3) groups. According to CE, the acetylation of lysine residues inhibited the binding of 11 SDS ([SDS] < 2 mM) and decreased the number of complexes of composition UBI-(NHAc)(8)·SDS(n) that formed on the pathway of unfolding of UBI-(NHAc)(8) in SDS. A comparison of (15)N-(1)H HSQC spectra at 0 mM and 1 mM SDS with calculated electrostatic surface potentials of folded UBI (e.g., solutions to the nonlinear Poisson-Boltzmann (PB) equation) suggested, however, that SDS binds preferentially to native UBI at hydrophobic residues that are formally neutral (i.e., Leu and Ile), but that have positive electrostatic surface potential (as predicted from solutions to nonlinear PB equations); SDS did not uniformly interact with residues that have formal positive charge (e.g., Lys or Arg). Cationic functional groups, therefore, promote the binding of SDS to folded UBI because these groups exert long-range effects on the positive electrostatic surface potential (which extend beyond their own van der Waals radii, as predicted from PB theory), and not because cationic groups are necessarily the site of ionic interactions with sulfate groups. Moreover, SDS associated with residues in native UBI without regard to their location in α-helix or β-sheet structure (although residues in hydrogen-bonded loops did not bind SDS). No correlation was observed between the association of an amino acid with SDS and the solvent accessibility of the residue or its rate of amide H/D exchange. This study establishes a few (of perhaps several) factors that control the simultaneous molecular recognition of multiple anionic amphiphiles by a folded cytosolic protein.
| S-EPMC3209763 | biostudies-literature
Project description:The number and type of synthetic chemicals that are being produced worldwide continues to increase significantly. While these industrial chemicals provide numerous benefits, there is no doubt that some have potential to damage the environment and health. Toxicity must be evaluated and use must be carefully controlled and monitored in order to minimize potential damage. DNA microarray technology has become an important new technique in toxicology. We are using the yeast Saccharomyces cerevisiae as a model organism for toxicological study because it is a simple, fast-growing eukaryote that has been thoroughly characterized. In order to evaluate toxicity by newly synthesized or mixture chemicals, toxicity-induced gene expression alteration profiles by known chemicals should be collected. In our study, cells need to be exposed with same experimental cellular condition, semi lethal (IC50), respectively. In the case of SDS (CAS; 151-21-3), the exposure dose was decided as 0.01% by growth curve with continuously diluted exposure. SDS is an anionic surfactant that is suspected to be gastrointestinal or liver toxicant. // Toxicity of anionic detergents determined by Saccharomyces cerevisiae microarray analysis: Sodium n-dodecyl benzene sulfonate (LAS) and sodium dodecyl sulfate (SDS) are popular anionic detergents (surfactants) that are used worldwide and the toxicities of these chemicals have been characterized. We applied these chemicals in a DNA microarray bioassay and determined that the microarray data reflects previous findings and also provides some new information about anionic detergent toxicity. The mRNA expression profiles suggest that LAS and SDS cause damage to membranes and alterations in carbon metabolism, and induce the oxidative stress response. We also found that LAS and SDS induce the pleiotropic drug-resistance network, and that LAS and SDS may be pumped out of yeast cells by this network. Hierarchical clustering of the expression profiles showed that LAS and SDS cause similar features of toxicity and that the toxicity is similar to that of capsaicin but different from that of cadmium and mercury. Keywords: stress response
2007-11-01 | GSE9364 | GEO
Project description:We have carried out a kinetic analysis of the conformational changes that myoglobin (Mb) undergoes in the presence of the anionic surfactant sodium dodecyl sulfate (SDS). The time-resolved results have been combined with steady-state circular dichroism (CD) and resonance Raman (RR) spectroscopy. Time-resolved absorption spectra indicate that SDS induces changes in the heme coordination with the formation of three different Mb species, depending on SDS concentration. The formation of the Mb/SDS complex involves three or four phases, depending on surfactant concentration. The kinetic data are analyzed assuming two modes of interaction according to whether SDS is monomeric or micellar. The two pathways are separated but interconnected through free Mb. At the lowest concentrations a six-coordinated, low-spin form dominates. Two distinct five-coordinated species are formed at higher SDS concentrations: one is a protein-free heme and the other reequilibrates slowly with the six-coordinated, low-spin form. The resulting complexes have been characterized by CD and RR. In addition, CD spectra show that the local changes in the heme environment are coupled to changes in the protein structure.
| S-EPMC1868993 | biostudies-literature
Project description:Linear alkyl sulfates are a major class of surfactants that have large-scale industrial application and thus wide environmental release. These organic pollutants threaten aquatic environments and other environmental compartments. We show the promise of the use of a whole-cell electric sensor in the analysis of low or residual concentrations of sodium dodecyl sulfate (SDS) in aqueous solutions. On the basis of bioinformatic analysis and alkylsulfatase activity determinations, we chose the gram-negative bacterium Herbaspirillum lusitanum, strain P6-12, as the sensing element. Strain P6-12 could utilize 0.01-400 mg/L of SDS as a growth substrate. The electric polarizability of cell suspensions changed at all frequencies used (50-3000 kHz). The determination limit of 0.01 mg/L is much lower than the official requirements for the content of SDS in potable and process water (0.5 and 1.0 mg/L, respectively), and the analysis takes about 1-5 min. The promise of H. lusitanum P6-12 for use in the remediation of SDS-polluted soils is discussed.
| S-EPMC9132749 | biostudies-literature
Project description:Understanding structural dynamics of biomolecules at the single-molecule level is vital to advancing our knowledge of molecular mechanisms. Currently, there are few techniques that can capture dynamics at the sub-nanometre scale and in physiologically relevant conditions. Atomic force microscopy (AFM)1 has the advantage of analysing unlabelled single molecules in physiological buffer and at ambient temperature and pressure, but its resolution limits the assessment of conformational details of biomolecules2. Here we present localization AFM (LAFM), a technique developed to overcome current resolution limitations. By applying localization image reconstruction algorithms3 to peak positions in high-speed AFM and conventional AFM data, we increase the resolution beyond the limits set by the tip radius, and resolve single amino acid residues on soft protein surfaces in native and dynamic conditions. LAFM enables the calculation of high-resolution maps from either images of many molecules or many images of a single molecule acquired over time, facilitating single-molecule structural analysis. LAFM is a post-acquisition image reconstruction method that can be applied to any biomolecular AFM dataset.
| S-EPMC8697813 | biostudies-literature
Project description:The interaction between methylene blue (MB) and sodium dodecyl sulfate (SDS) has been widely studied spectroscopically, but details about their interactions remain unclear. Here, we combined photoacoustic (PA) imaging with nanoparticle tracking analysis (NTA) and spectroscopy to further elucidate this interaction. PA imaging of 0.05 mM MB showed a 492-fold increase in intensity upon the addition of 3.47 mM SDS. Higher concentrations above SDS's critical micelle concentration (CMC) at 8.67 mM decreased the PA intensity by 54 times. Relative quantum yield measurements indicated that PA intensity increased as a result of fluorescence quenching. Meanwhile, NTA indicated an increased number of nonmicellar MB/SDS clusters at SDS concentrations below the CMC varying in size from 80 to 400 nm as well as a decreased number above the CMC. This trend suggested that MB/SDS clusters are responsible for the PA intensity enhancement. Comparison of PA intensities and spectral shifts with MB/hexadecyltrimethylammonium bromide, MB/sodium octyl sulfate, and MB/sodium chloride demonstrated that MB was bound to the sulfate moiety of SDS before and after micellization. Our observations suggest that MB forms aggregates with SDS at premicellar concentrations, and the MB aggregates disassociate as monomers that are bound to the sulfate moiety of SDS at micellar concentrations. These findings further clarify the process by which MB and SDS interact and demonstrate the potential for developing MB-/SDS-based contrast agents.
| S-EPMC6200325 | biostudies-literature
Project description:Evaporation of surfactant-laden sessile droplets is omnipresent in nature and industrial applications such as inkjet printing. Soluble surfactants start to form micelles in an aqueous solution for surfactant concentrations exceeding the critical micelle concentration (CMC). Here, the evaporation of aqueous sodium dodecyl sulfate (SDS) sessile droplets on hydrophobic surfaces was experimentally investigated for SDS concentrations ranging from 0.025 to 1 CMC. In contrast to the constant contact angle of an evaporating sessile water droplet, we observed that, at the same surface, the contact angle of an SDS laden droplet with concentration below 0.5 CMC first decreases, then increases, and finally decreases, resulting in a local contact angle minimum. Surprisingly, the minimum contact angle was found to be substantially lower than the static receding contact angle and decreased with decreasing initial SDS concentration. Furthermore, the bulk SDS concentration at the local contact angle minimum was found to decrease with decrease in the initial SDS concentration. The location of the observed contact angle minimum relative to the normalized evaporation time and its minimum value proved to be independent of both the relative humidity and droplet volume and thus of the total evaporation time. We discuss the observed contact angle dynamics in terms of the formation of a disordered layer of SDS molecules on the substrate at concentrations below 0.5 CMC. The present work underlines the complexity of the evaporation of sessile liquid-surfactant droplets and the influence of surfactant-substrate interactions on the evaporation process.
| S-EPMC6694411 | biostudies-literature
Project description:Measurements of the surface tension, density and viscosity of sodium dodecyl sulfate (SDS) and rhamnolipid (RL) mixtures were carried out in aqueous solution. From the obtained results, composition of mixed surface layer at the water-air interface, mixed micelles, parameter of intermolecular interactions, activity of SDS and RL in the surface layer and micelles, Gibbs standard free energy of adsorption and micellization as well as Gibbs free energy of SDS and RL mixing in the surface layer and micelles were established. These parameters were discussed in the light of independent adsorption of SDS and RL and the size of their molecules as well as the area in contact with water molecules. A correlation between the number of water molecules in contact with those of SDS and RL and standard free energy of adsorption as well as micellization of these surfactants was observed. A correlation between the apparent and partial molar volumes of RL and SDS in their mixture and size of surfactant molecules as well as the average distance between molecules was also found. The parameter of intermolecular interactions indicates that there is a synergetic effect in the reduction of water surface tension and micelle formation.
| S-EPMC5320015 | biostudies-literature
Project description:MXenes suffer from severe oxidation and progressive degradation in aqueous media due to its poor chemical stability. Herein, sodium dodecyl sulfate (SDS) is employed as an efficient protectant for long-term storage of Ti3 C2 Tx -MXene aqueous dispersion. Experimental data support SDS's capability to protect oxidation-prone sites on Ti3 C2 Tx nanosheets, providing extended colloidal stability of up to 213 days. Concentration-dependent anti-oxidation effect articulates that 1.5 mg mL-1 is deemed as an ideal SDS dose for Ti3 C2 Tx to achieve optimal oxidation-resistance in aqueous solution. Additionally, a chroma strategy is developed to instantly and precisely measure the oxidation degree of Ti3 C2 Tx . Adsorption-driven anti-oxidation efficacy of SDS is further confirmed by optimized conformations with interaction energies of SDS on termination-free and surface-defective Ti3 C2 Tx through multiscale simulations. This proposed route is a step forward in broadening the horizons of experimental and theoretical investigations of MXenes with promising implications for long-term storage and reliable applications.
| S-EPMC10460840 | biostudies-literature