Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Novel Concept of Micro Patterned Micro Titer Plates Fabricated via UV-NIL for Automated Neuronal Cell Assay Read-Out.

ABSTRACT: The UV-nanoimprint lithography(UV-NIL) fabrication of a novel network of micron-sized channels, forming an open channel microfluidic system is described. Details about the complete manufacturing process, from mastering to fabrication in small batches and in high throughput with up to 1200 micro titer plates per hour is presented. Deep insight into the evaluation of a suitable UV-curable material, mr-UVCur26SF is given, presenting cytotoxic evaluation, cell compatibility tests and finally a neuronal assay. The results indicate how the given pattern, in combination with the resist, paves the way to faster, cheaper, and more reliable drug screening.

SUBMITTER: Lohse M

PROVIDER: S-EPMC8065385 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Light-Driven Liquid Crystal Circular Dammann Grating Fabricated by a Micro-Patterned Liquid Crystal Polymer Phase Mask.

Project description:As one of the diffractive optical elements, circular Dammann grating has shown its excellent versatility in practical applications. The electrically switchable Dammann grating has been extensively investigated; however, the research on the optically tunable circular Dammann grating has received less attention and reports on this subject have been insufficient in the past decade. In this paper, three-order and eight-order binary-phase liquid crystal circular Dammann gratings with two mutually orthogonal photo-induced alignments in every two adjacent alignment domains, fabricated by a micro-patterned liquid crystal polymer phase mask, are proposed to generate annular uniform-intensity patterns in the far field. A simple maskless optical tuning of an eight-order liquid crystal circular Dammann grating is demonstrated by controlling the polarization of an ultraviolet light as well as the energy dose. The proposed liquid crystal circular Dammann gratings with high efficiencies and desirable uniformities exhibit outstanding optical as well as electrical tunabilities, enabling the widespread prospective applications in adaptive photonic chips stimulated flexibly by only light or by the combination of light and electric field.

| S-EPMC6418637 | biostudies-literature

Selection of UV-resins for nanostructured molds for thermal-NIL.

Project description:Nanoimprint molds made of soft polymeric materials have advantages of low demolding force and low fabrication cost over Si or metal-based hard molds. However, such advantages are often sacrificed by their reduced replication fidelity associated with the low mechanical strength. In this paper, we studied replication fidelity of different UV-resin molds copied from a Si master mold via UV nanoimprint lithography (NIL) and their thermal imprinting performance into a thermoplastic polymer. Four different UV-resins were studied: two were high surface energy UV-resins based on tripropyleneglycol diacrylate (TPGDA resin) and polypropyleneglycol diacrylate (PPGDA resin), and the other two were commercially available, low surface energy poly-urethane acrylate (PUA resin) and fluorine-containing (MD 700) UV-resins. The replication fidelity among the four UV-resins during UV nanoimprint lithograph from a Si master with sharp nanostructures was in the increasing order of (poorest) PUA resin < MD 700 < PPGDA resin < TPGDA resin (best). The results show that the high surface energy and small monomer size are keys to achieving good UV-resin filling into sharp nanostructures over the viscosity of the resin solution. When the four UV-resin molds were used for thermal-NIL into a thermoplastic polymer, the replication fidelity was in the increasing order of (poorest) MD 700 < TPGDA resin < PUA resin (best), which follows the same order of their Young's moduli. Our results indicate that the selection of an appropriate UV-resin for NIL molds requires consideration of the replication fidelities in the mold fabrication and the subsequent thermal-NIL into thermoplastic polymers.

| S-EPMC6532406 | biostudies-literature

Human iPSC-derived pulmonary epithelial cells infected with SARS-CoV-2 variants in the micro-patterned culture plates [SARS-CoV-2]

Project description:We infected iPSC-derived pulmonary epithelial cells in the micro-patterned culture plate with the SARS-CoV-2 variants. Analyses of infected alveolar and airway epithelial cells, respectively, revealed the tropism of the variants.

2024-02-29 | GSE236841 | GEO

Shaped Films of Ionotropic Hydrogels Fabricated Using Templates of Patterned Paper.

Project description: Not available

| S-EPMC3521578 | biostudies-literature

Multicomponent Droplet Evaporation on Chemical Micro-Patterned Surfaces.

Project description:The evaporation and dynamics of a multicomponent droplet on a heated chemical patterned surface were presented. Comparing to the evaporation process of a multicomponent droplet on a homogenous surface, it is found that the chemical patterned surface can not only enhance evaporation by elongating the contact line, but also change the evaporation process from three regimes for the homogenous surface including constant contact line (CCL) regime, constant contact angle (CCA) regime and mix mode (MM) to two regimes, i.e. constant contact line (CCL) and moving contact line (MCL) regimes. The mechanism of contact line stepwise movement in MCL regimes in the microscopic range is investigated in detail. In addition, an improved local force model on the contact line was employed for analyzing the critical receding contact angles on homogenous and patterned surfaces. The analysis results agree well for both surfaces, and confirm that the transition from CCL to MCL regimes indicated droplet composition changes from multicomponent to monocomponent, providing an important metric to predict and control the dynamic behavior and composition of a multicomponent droplet using a patterned surface.

| S-EPMC5291323 | biostudies-literature

Tunable hard x-ray nanofocusing with Fresnel zone plates fabricated using deep etching.

Project description:Fresnel zone plates are widely used for x-ray nanofocusing, due to their ease of alignment and energy tunability. Their spatial resolution is limited in part by their outermost zone width dr N , while their efficiency is limited in part by their thickness t zp. We demonstrate the use of Fresnel zone plate optics for x-ray nanofocusing with dr N = 16 nm outermost zone width and a thickness of about t zp = 1.8 μm (or an aspect ratio of 110) with an absolute focusing efficiency of 4.7% at 12 keV, and 6.2% at 10 keV. Using partially coherent illumination at 12 keV, the zone plate delivered a FWHM focus of 46 × 60 nm at 12 keV, with the first order coherent mode in a ptychographic reconstruction showing a probe size of 16 nm FWHM. These optics were fabricated using a combination of metal assisted chemical etching and atomic layer deposition for the diffracting structures, and silicon wafer back-thinning to produce optics useful for real applications. This approach should enable new higher resolution views of thick materials, especially when energy tunability is required.

| S-EPMC7720910 | biostudies-literature

Transcriptomes of human iPSC-derived alveolar and airway cells in the micro-patterned culture plates and their responses to SARS-CoV-2 variant infection

Project description:This SuperSeries is composed of the SubSeries listed below.

2024-02-29 | GSE236842 | GEO

Heterogeneous films of ionotropic hydrogels fabricated from delivery templates of patterned paper.

Project description:The use of delivery templates makes it possible to fabricate shaped, millimeter-thick heterogeneously patterned films of ionotropic hydrogels. These structures include two-dimensional (2-D) patterns of a polymer cross-linked by different ions (e.g., alginic acid cross-linked with Ca2+ and Fe3+) and patterns of step gradients in the concentration of a single cross-linking ion. The delivery templates consist of stacked sheets of chromatography paper patterned with hydrophobic barriers (waterproof tape, transparency film, or toner deposited by a color laser printer). Each layer of paper serves as a reservoir for a different solution of cross-linking ions, while the hydrophobic barriers prevent solutions on adjacent sheets from mixing. Holes cut through the sheets expose different solutions of cross-linking ions to the surface of the templates. Films with shaped regions of hydrogels cross-linked by paramagnetic ions can be oriented with a bar magnet. Variations in the concentrations of cations used to cross-link the gel can control the mechanical properties of the film: for single alginate films composed of areas cross-linked with different concentrations of Fe3+, the regions cross-linked with high concentrations of Fe3+ are more rigid than regions cross-linked with low concentrations of Fe3+. The heterogeneous hydrogel films can be used to culture bacteria in various 2-D designs. The pattern of toxic and nontoxic ions used to cross-link the polymer determines the pattern of viable colonies of Escherichia coli within the film.

| S-EPMC2789467 | biostudies-literature

Enhanced Adhesion of Synthetic Discs with Micro-Patterned Margins.

Project description:Many aquatic creatures in nature have non-cooperative surface scaling abilities using suction organs; micro-/nano-scale structures found in different parts of the organs play an important role in this mechanism. Synthetic bioinspired suction devices have been developed, but the mechanisms of bioinspired suction system need further investigation. This paper presents the development of a synthetic adhesive disc inspired by the hillstream loach. The microscopic structures involved in adhesion of the hillstream loach were investigated. Bioinspired suction discs were designed with single-level or hierarchical micropatterned margins. Micro three-dimensional (3D) printing and micro electromechanical system (MEMs) technology were utilized in the fabrication of the discs, and the adhesion performance was tested on substrates with different roughness values. The engaging and disengaging processes of the margin were simulated by carrying out a peeling test on a submerged substrate. The interactions between the liquid film and the microstructures were observed using fluorescence microscopy. The enhanced adhesion forces due to the synergy of the hierarchically micro-patterned margin and the disc cavity were duplicated in the synthetic adhesion system.

| S-EPMC9680415 | biostudies-literature

A micro-fabricated in vitro complex neuronal circuit platform

Project description:Abstract Developments in micro-manufacture as well as biofabrication technologies are driving our ability to create complex tissue models such as ‘organ-on-a-chip’ devices. The complexity of neural tissue, however, requires precisely specific cellular connectivity across many neuronal populations, and thus there have been limited reports of complex ‘brain-on-a-chip’ technologies modelling specific cellular circuit function. Here we describe the development of a model of in vitro brain circuitry designed to accurately reproduce part of the complex circuitry involved in neurodegenerative diseases; using segregated co-culture of specific basal ganglia (BG) neuronal subtypes to model central nervous system circuitry. Lithographic methods and chemical modification were used to form structured micro-channels, which were populated by specifically cultured neuronal sub-types to represent parts of the inter-communicating neural circuit. Cell morphological assessment and immunostaining showed connectivity, which was supported by electrophysiology measurements. Electrical activity of cells was measured using patch-clamp, showing voltage dependant Na+ and K+ currents, and blocking of Na+ current by TTX, and calcium imaging showing TTX-sensitive slow Ca2+ oscillations resulting from action potentials. Monitoring cells across connected ports post-TTX addition demonstrated both upstream and downstream changes in activity, indicating network connectivity. The model developed herein provides a platform technology that could be used to better understand neurological function and dysfunction, contributing to a growing urgency for better treatments of neurodegenerative disease. We anticipate the use of this advancing technology for the assessment of pharmaceutical and cellular therapies as a means of pre-clinical assessment, and further for the advancement of neural engineering approaches for tissue engineering.

| S-EPMC8208576 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data