Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Simultaneous Removal of Arsenic and Manganese from Synthetic Aqueous Solutions Using Polymer Gel Composites.

ABSTRACT: The groundwater in approximately 50% of the Bangladesh landmass contains Mn concentrations greater than the limit prescribed by the WHO drinking water guidelines. Although studies have suggested that γ-FeOOH can effectively remove Mn from water, its practicability has not been investigated, considering that the additional processes required to separate the adsorbents and precipitates are not environment-friendly. To improve the efficiency of adsorptive Mn-removal under natural conditions, we employed a cationic polymer gel composite, N,N'-Dimethylaminopropyl acrylamide, methyl chloride quaternary (DMAPAAQ) loaded with iron hydroxide (DMAPAAQ + FeOOH), and a non-ionic polymer gel composite, N,N'-Dimethylacrylamide (DMAA) loaded with iron hydroxide (DMAA + FeOOH). DMAPAAQ + FeOOH exhibited a higher As removal efficiency under natural conditions while being environment-friendly. Our results suggest that the higher efficiency of the cationic gel composite is owed to the higher γ-FeOOH content in its gel structure. The maximum adsorption of Mn by DMAPAAQ + FeOOH was 39.02 mg/g. Furthermore, the presence of As did not influence the adsorption of Mn on the DMAPAAQ + FeOOH gel composite and vice versa. DMAPAAQ adsorbed As and the γ-FeOOH particles simultaneously adsorbed Mn. Our findings can serve as a basis for the simultaneous removal of contaminants such as As, Mn, Cr, and Cd.

SUBMITTER: Safi SR

PROVIDER: S-EPMC8073374 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Removal of Diclofenac, Paracetamol, and Carbamazepine from Model Aqueous Solutions by Magnetic Sol-Gel Encapsulated Horseradish Peroxidase and Lignin Peroxidase Composites.

Project description:Sustainable and green synthesis of nanocomposites for degradation of pharmaceuticals was developed via immobilization and stabilization of the biological strong oxidizing agents, peroxidase enzymes, on a solid support. Sol-gel encapsulated enzyme composites were characterized using electron microscopy (TEM, SEM), atomic force microscopy, FTIR spectroscopy, and thermogravimetric analysis. Horseradish peroxidase (HRP) and lignin peroxidase (LiP) were adsorbed onto magnetite nanoparticles and sol-gel encapsulated in a surface silica layer. Encapsulation enhanced the stability of the biocatalysts over time and thermal stability. The biocatalysts showed appreciable selectivity in oxidation of the organic drinking water pollutants diclofenac, carbamazepine, and paracetamol with improved activity being pharmaceutical specific for each enzyme. In particular, sol-gel encapsulated LiP- and HRP-based nanocomposites were active over 20 consecutive cycles for 20 days at 55 °C (24 h/cycle). The stability of the sol-gel encapsulated catalysts in acidic medium was also improved compared to native enzymes. Carbamazepine and diclofenac were degraded to 68% and 64% by sol-gel LiP composites respectively at pH 5 under elevated temperature. Total destruction of carbamazepine and diclofenac was achieved at pH 3 (55 °C) within 3 days, in the case of both immobilized HRP and LiP. Using NMR spectroscopy, characterization of the drug decomposition products, and decomposition pathways by the peroxidase enzymes suggested.

| S-EPMC7075194 | biostudies-literature

Manganese (II) removal from aqueous solutions by Cladosporium halotolerans and Hypocrea jecorina.

Project description:Manganese (Mn) is toxic at higher concentrations requiring its removal before returning the wastewater to the environment. This article reported the Mn removal of two fungi strains isolated from mine wastewater. ITS rRNA region sequencing identified the fungi strains as Cladosporium halotolerans and Hypocrea jecorina. Mn2+ removal assays were performed in Sabouraud broth with 50 mg L-1 Mn2+ supplemented and bioleaching assays using MnO2 instead of MnSO4 at the same conditions. C. halotolerans removed 96 % of 50 mg L-1 Mn2+ at two weeks without MnO2 bioleaching with 649.9 mg of biomass and H. jecorina removed about 50 % of Mn2+ in 21 days from initial 50 mg of Mn2+ L-1 with 316.8 mg of biomass. Extracellular laccases were present in C. halotolerans agar regardless of the Mn addition. Mn adsorbed was detected on C. halotolerans hyphae. Mn oxidation was positive to H. jecorina by reaction of its medium with Leucoberbelin blue.

| S-EPMC7013165 | biostudies-literature

Graphene-Supported Spinel CuFe₂O₄ Composites: Novel Adsorbents for Arsenic Removal in Aqueous Media.

Project description:A graphene nanoplate-supported spinel CuFe₂O₄ composite (GNPs/CuFe₂O₄) was successfully synthesized by using a facile thermal decomposition route. Scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Electron Dispersive Spectroscopy (EDS), X-ray diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS) were employed to characterize the prepared composite. The arsenic adsorption behavior of the GNPs/CuFe₂O₄ composite was investigated by carrying out batch experiments. Both the Langmuir and Freundlich models were employed to describe the adsorption isotherm, where the sorption kinetics of arsenic adsorption by the composite were found to be pseudo-second order. The selectivity of the adsorbent toward arsenic over common metal ions in water was also demonstrated. Furthermore, the reusability and regeneration of the adsorbent were investigated by an assembled column filter test. The GNPs/CuFe₂O₄ composite exhibited significant, fast adsorption of arsenic over a wide range of solution pHs with exceptional durability, selectivity, and recyclability, which could make this composite a very promising candidate for effective removal of arsenic from aqueous solution. The highly sensitive adsorption of the material toward arsenic could be potentially employed for arsenic sensing.

| S-EPMC5492396 | biostudies-literature

Optimization of Arsenic Removal from Aqueous Solutions Using Amidoxime Resin Hosted by Mesoporous Silica.

Project description:The paper reports on the performances of cross-linked amidoxime hosted into mesoporous silica (AMOX) in the removal of As(III) and As(V). The optimum pH for sorption of As(III) and As(V) was pH 8 and pH 5, respectively. The PFO kinetic model and the Sips isotherm fitted the best the experimental data. The thermodynamic parameters were evaluated using the equilibrium constant values given by the Sips isotherm at different temperatures and found that the adsorption process of As(III) and As(V) was spontaneous and endothermic on all AMOX sorbents. The spent AMOX sorbents could be easily regenerated with 0.2 mol/L HCl solution and reused up to five sorption/desorption cycles with an average decrease of the adsorption capacity of 18%. The adverse effect of the co-existing inorganic anions on the adsorption of As(III) and As(V) onto the sorbent with the highest sorption capacity (AMOX3) was arranged in the following order: H2PO4 - > HCO3 - > NO3 - > SO4 2-.

| S-EPMC9453956 | biostudies-literature

Arsenic removal from aqueous solutions using Fe3O4-HBC composite: effect of calcination on adsorbents performance.

Project description:The presence of elevated concentration of arsenic in water sources is considered to be health hazard globally. Calcination process is known to change the surface efficacy of the adsorbent. In current study, five adsorbent composites: uncalcined and calcined Fe3O4-HBC prepared at different temperatures (400°C and 1000°C) and environment (air and nitrogen) were investigated for the adsorptive removal of As(V) and As(III) from aqueous solutions determining the influence of solution's pH, contact time, temperature, arsenic concentration and phosphate anions. Characterizations from FTIR, XRD, HT-XRD, BET and SEM analyses revealed that the Fe3O4-HBC composite at higher calcination temperature under nitrogen formed a new product (fayalite, Fe2SiO4) via phase transformation. In aqueous medium, ligand exchange between arsenic and the effective sorbent site ( = FeOOH) was established from the release of hydroxyl group. Langmuir model suggested data of the five adsorbent composites follow the order: Fe3O4-HBC-1000°C(N2)>Fe3O4-HBC (uncalcined)>Fe3O4-HBC-400°C(N2)>Fe3O4-HBC-400°C(air)>Fe3O4-HBC-1000°C(air) and the maximum As(V) and As(III) adsorption capacities were found to be about 3.35 mg g(-1) and 3.07 mg g(-1), respectively. The adsorption of As(V) and As(III) remained stable in a wider pH range (4-10) using Fe3O4-HBC-1000°C(N2). Additionally, adsorption data fitted well in pseudo-second-order (R2>0.99) rather than pseudo-first-order kinetics model. The adsorption of As(V) and As(III) onto adsorbent composites increase with increase in temperatures indicating that it is an endothermic process. Phosphate concentration (0.0l mM or higher) strongly inhibited As(V) and As(III) removal through the mechanism of competitive adsorption. This study suggests that the selective calcination process could be useful to improve the adsorbent efficiency for enhanced arsenic removal from contaminated water.

| S-EPMC4072660 | biostudies-literature

Biosorption Potential of Phanerochaete chrysosporium for Arsenic, Cadmium, and Chromium Removal from Aqueous Solutions.

Project description:Efficient degradation of hazardous contaminants from contaminated water is the major challenge for researchers, wherein heavy metals are the prominent contaminants. Consequently, the assessment of multimetal removal is necessary using efficient biosorbant. In this work, the capability of Phanerochaete chrysosporium is evaluated for the individual and simultaneous removal of heavy metals. Individual and simultaneous removal of As, Cd, and Cr is optimized using response surface methodology based on the central composite design by changing the variables, i.e., pH, fungal biomass, and metal concentration. Optimization of the individual metal removal study reveals that fungus effectively absorbs As (29.95 mg L-1), Cd (18.1 mg L-1), and Cr (26.34 mg L-1) at 6.1, 5.64, and 4.15 of pH, respectively. Similarly, As (14.18 mg L-1), Cd (4.53 mg L-1), and Cr (9.28 mg L-1) are absorbed by fungal hyphae simultaneously within 1 h. Changes in the morphology of fungal hyphae are detected in metal absorbed samples as compared to the control hyphae. Interaction of metal-absorbed fungal hyphae is analyzed using FTIR spectroscopy, revealing that the proteins, carbohydrates, and fatty acids present in the fungal cell are interacted with metals. The model white rot fungi used in the present study can be applied efficiently for the multimetal removal in effluent treatment plants.

| S-EPMC6607372 | biostudies-literature

Removal of Chromium(VI) from Aqueous Solutions Using Fe₃O₄ Magnetic Polymer Microspheres Functionalized with Amino Groups.

Project description:Magnetic polymer microspheres (MPMs) using glycidylmethacrylate (GMA) as a functional monomer were synthesized in the presence of Fe₃O₄ nanoparticles via dispersion polymerization. After polymerization, the magnetic polymer microbeads were modified with ethylenediamine (EDA). The obtained ethylenediamine-functionalized magnetic microspheres (EDA-MPMs) were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), vibrating-sample magnetometer (VSM) and Fourier transform infrared (FT-IR) spectroscopy. Then the EDA-MPMs were applied as adsorbents for the removal of Cr(VI) from aqueous solution. Langmuir equation was appropriate to describe the experimental data. The maximum adsorption capacities obtained from the Langmuir model were 236.9, 242.1 and 253.2 mg/g at 298, 308 and 318 K, respectively. The Cr(VI) adsorption equilibrium was established within 120 min and the adsorption kinetics was compatibly described by the pseudo-second order equation. The thermodynamic parameters (ΔG°, ΔH°, ΔS°) of the sorption process revealed that the adsorption was spontaneous and was an endothermic process. The regeneration study demonstrated that the EDA-MPMs could be repeatedly utilized with no significant loss of adsorption efficiency.

| S-EPMC5458844 | biostudies-literature

Removal of arsenic(v) from aqueous solutions using sulfur-doped Fe3O4 nanoparticles.

Project description:In this study, magnetic sulfur-doped Fe3O4 nanoparticles (Fe3O4:S NPs) were applied as adsorbents for the removal of As(v). Fe3O4:S NPs were fabricated by a two-step route, which included low-temperature mixing and high-temperature sintering. The as-prepared Fe3O4:S NPs could effectively remove As(v) under a wide pH range of 2-10 and presented a high As(v) adsorption capacity of 58.38 mg g-1, which was much better than undoped Fe3O4 nanoparticles (20.24 mg g-1). Adsorption experiments exhibited a pseudo-second-order model of adsorption kinetics and a Langmuir isotherm model of adsorption isotherms. Additionally, the coexisting ions such as NO3 -, SO4 2-, and CO3 2- had no significant effect on As(v) adsorption and the adsorbent worked well in actual smelting wastewater. XPS and FTIR spectra of Fe3O4:S NPs before and after As(v) adsorption showed that Fe-OH groups played a significant role in the adsorption mechanisms. Moreover, the magnetic Fe3O4:S NPs adsorbents after adsorption could be rapidly separated from wastewater with an external magnetic field. Therefore, Fe3O4:S NPs could be an ideal candidate for the removal of As(v) from water.

| S-EPMC9091571 | biostudies-literature

Immobilization of β-CD on a Hyper-Crosslinked Polymer for the Enhanced Removal of Amines from Aqueous Solutions.

Project description:In this paper, we adopted a simple and efficient strategy to prepare a β-cyclodextrin (β-CD)-modified hyper-crosslinked polymer (CDM-HCP). The structures and physicochemical properties of the as-synthesized polymer were also evaluated. It was applied to the removal of anilines from aqueous solutions. The introduction of β-CD into the hyper-crosslinked polymer significantly enhanced adsorption properties for the removal of various amines. The adsorption kinetics agreed with the pseudo-second-order mode very well. The adsorption isotherm data of p-methylaniline (p-MA) and p-aminobenzoic acid (p-ABC) were in agreement with the Langmuir isotherm, whereas aniline and p-chloroaniline (p-CA) were fitted best with the Freundlich model. The maximum adsorption capacities (qmax) determined by adsorption isotherms were 148.97 mg/g for aniline, 198.45 mg/g for p-MA, 293.71 mg/g for p-CA, and 622.91 mg/g for p-ABC, respectively. It had higher adsorption capacities than those of some commercial polymeric resins, such as XAD-4, PA66, and AB-8. The interaction mechanism was investigated by FTIR, XPS, and the ONIOM2 method. A CDM-HCP can be regenerated efficiently and used repeatedly, indicating its potential technological applications in removing organic pollutants from actual industrial effluents.

| S-EPMC7408518 | biostudies-literature

Fluoxetine and Nutrients Removal from Aqueous Solutions by Phycoremediation.

Project description:The tertiary treatment using microalgae offers an attractive alternative to the removal of low but relevant concentrations of pharmaceuticals from domestic wastewaters. The removal of fluoxetine from aqueous solutions by living and non-living (lyophilized) Chlorella vulgaris was assessed. The determination of the pH at the point of zero charge, Fourier transmittance infrared analysis, and scanning electron microscopy were performed to characterize the microalgae biomass. Kinetic and equilibrium experiments were performed. The pseudo-second-order model described the kinetics of fluoxetine. The corresponding kinetic constants indicated that biosorption was faster onto non-living biomass than onto living biomass. The equilibrium results showed that the systems followed the Langmuir isotherm model. The maximum capacity of living microalgae (1.9 ± 0.1 mg·g-1) was slightly higher than the non-living microalgae (1.6 ± 0.2 mg·g-1). Living Chlorella vulgaris, free and immobilized in calcium-alginate, were also used to remove fluoxetine and nutrients (nitrogen and phosphorus) from treated municipal wastewater in a batch system. In both experiments, fluoxetine was completely removed within six days. The total phosphorus (TP) and total nitrogen (TN) removal efficiencies achieved for free and immobilized cells were, null and 65.0 ± 0.1%, and 86.2 ± 0.1% and 81.8 ± 3.1, respectively.

| S-EPMC9141300 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data