Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of Composition on Polarization Hysteresis and Energy Storage Ability of P(VDF-TrFE-CFE) Relaxor Terpolymers.

ABSTRACT: The temperature dependence of the dielectric permittivity and polarization hysteresis loops of P(VDF-TrFE-CFE) polymer films with different compositions are studied. Among them, the three compositions, 51.3/48.7/6.2, 59.8/40.2/7.3, and 70/30/8.1, are characterized for the first time. Relaxor behavior is confirmed for all studied samples. Increasing the CFE content results in lowering the freezing temperature and stabilizes the ergodic relaxor state. The observed double hysteresis loops are related to the field-induced transition to a ferroelectric state. The critical field corresponding to this transition varies with the composition and temperature; it becomes larger for temperatures far from the freezing temperature. The energy storage performance is evaluated from the analysis of unipolar polarization hysteresis loops. P(VDF-TrFE-CFE) 59.8/40.2/7.3 shows the largest energy density of about 5 J·cm^-3 (at the field of 200 MV·m^-1) and a charge-discharge efficiency of 63%, which iscomparable with the best literature data for the neat terpolymers.

SUBMITTER: Hambal Y

PROVIDER: S-EPMC8073565 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Skin-Inspired Pressure Sensor with MXene/P(VDF-TrFE-CFE) as Active Layer for Wearable Electronics.

Project description:Multi-functional electronic skin is of paramount significance for wearable electronics in health monitoring, medical analysis, and human-machine interfacing systems. In order to achieve the function of natural skin, mechanical sensing with high sensitivity is an important feature of electronic skin. Inspired by the spinosum structure under the skin, herein, we fabricate a new capacitive pressure sensor with two-dimensional transition-metal carbides and nitrides (MXene) and ferroelectric polymer (P(VDF-TrFE-CFE)) as an active layer and micropatterned Cr-Au deposited on polydimethylsiloxane as flexible electrodes. Such a method is facile, effective, easily operated, and low-cost. The device design provides great capacitive change as a consequence of large deformation under pressure. Benefiting from the randomly distributed microstructure and high dielectric constant of the active layer, the device demonstrates high sensitivity with great linearity (16.0 kPa-1 for less than 10 kPa), that is, a low detection limit of 8.9 Pa, and quick response. A series of dynamic physiological signals, including typing, knuckle motion, and voice recognition can be facilely detected, making it a competitive candidate in the field of wearable electronics.

| S-EPMC7999094 | biostudies-literature

High Energy Storage Density in Nanocomposites of P(VDF-TrFE-CFE) Terpolymer and BaZr0.2Ti0.8O3 Nanoparticles.

Project description:Polymer materials are actively used in dielectric capacitors, in particular for energy storage applications. An enhancement of the stored energy density can be achieved in composites of electroactive polymers and dielectric inorganic fillers with a high dielectric permittivity. In this article, we report on the energy storage characteristics of composites of relaxor terpolymer P(VDF-TrFE-CFE) and BaZr0.2Ti0.8O3 (BZT) nanoparticles. The choice of materials was dictated by their large dielectric permittivity in the vicinity of room temperature. Free-standing composite films, with BZT contents up to 5 vol.%, were prepared by solution casting. The dielectric properties of the composites were investigated over a wide range of frequencies and temperatures. It was shown that the addition of the BZT nanoparticles does not affect the relaxor behavior of the polymer matrix, but significantly increases the dielectric permittivity. The energy storage parameters were estimated from the analysis of the unipolar polarization hysteresis loops. The addition of the BZT filler resulted in the increasing discharge energy density. The best results were achieved for composites with 1.25-2.5 vol.% of BZT. In the range of electric fields to 150 MV/m, the obtained materials demonstrate a superior energy storage density compared to other P(VDF-TFE-CFE) based composites reported in the literature.

| S-EPMC9105365 | biostudies-literature

Structural Tailing and Pyroelectric Energy Harvesting of P(VDF-TrFE) and P(VDF-TrFE-CTFE) Ferroelectric Polymer Blends.

Project description:The copolymer P(VDF-TrFE) is a normal ferroelectric because the bulky TrFE monomer improves its crystalline chain structure, while the terpolymer P(VDF-TrFE-CTFE) is a relaxor ferroelectric because the third monomer CTFE makes it amorphous. Herein, in order to induce a crystalline beta phase in the terpolymer, we blended a small amount of crystalline P(VDF-TrFE) into P(VDF-TrFE-CTFE) and investigated the effect of blending on the pyroelectric energy harvesting (PyEH) properties. The polarization-electric field hysteresis loops at different temperatures and energy densities were investigated. The PyEH energy density (N D) is compared with the electrical energy density (U E). The U E and N D at the ferroelectric-paraelectric transition temperature for the ? = 0.1 blend are reported as 3.18 and 5.04 J/cm3, respectively, which are higher than the other polymer blends. Interestingly, the N D of the ? = 0.9 blend is found to be 3.44 J/cm3 when operated at lower and higher temperatures, that is, at T L = 25 °C and T H = 40 °C, respectively, which is the highest possible energy density at the lowest possible transition temperature for the polymer blends.

| S-EPMC7301377 | biostudies-literature

Aligned P(VDF-TrFE) Nanofibers for Enhanced Piezoelectric Directional Strain Sensing.

Project description:Piezoelectric poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) nanofibers fabricated by electrospinning have drawn increasing levels of attention in the fields of flexible sensors and nanogenerators. However, the directional dependence of piezoelectricity of electrospun nanofibers remains elusive. In this study, the piezoelectric performances of individual nanofibers are characterized by piezoresponse force microscopy (PFM), while the effects of annealing on β-phase crystallinities are investigated by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The experimental results reveal that the as-spun P(VDF-TrFE) nanofibers form higher content of β-phase compared with spin-coated films, and the content of β-phase increases by annealing. The annealed P(VDF-TrFE) nanofiber exhibits distinct vertical polarization switching characteristics. The high piezoelectric output in the thickness direction and low piezoelectric output in the longitudinal direction of the nanofiber mats further confirm that the preferential dipole orientation of electrospun P(VDF-TrFE) nanofibers is normal to the surface of the substrate. Highly aligned P(VDF-TrFE) nanofibers show directional strain sensing ability due to the piezoelectric and mechanical anisotropy.

| S-EPMC6414850 | biostudies-literature

A Flexible Piezoelectric Nanogenerator Based on Aligned P(VDF-TrFE) Nanofibers.

Project description:Aligned P(VDF-TrFE) nanofibers are successfully fabricated by advanced electrospinning. The aligned feature of the nanofibers is achieved by using parallel electrodes, which is fabricated by lithography and wet etching, and a rotating drum collector. Scanning electron microscope (SEM) images show that the nanofibers are highly ordered with a smooth surface and uniform diameter. X-ray diffraction (XRD) and Fourier Transform Infrared spectrum (FTIR) tests indicate that the fibers contain high β phase content. The nanogenerator based on aligned P(VDF-TrFE) nanofibers exhibits good electric performance with a maximum output voltage as high as 12 V and peak-peak short circuit current about 150 nA, highlighting the potential application of P(VDF-TrFE) on self-powered and wearable devices.

| S-EPMC6562417 | biostudies-literature

Self-Polarized P(VDF-TrFE)/Carbon Black Composite Piezoelectric Thin Film.

Project description:Self-polarized energy harvesting materials have seen increasing research interest in recent years owing to their simple fabrication method and versatile application potential. In this study, we systematically investigated self-polarized P(VDF-TrFE)/carbon black (CB) composite thin films synthesized on flexible substrates, with the CB content varying from 0 to 0.6 wt.% in P(VDF-TrFE). The presence of -OH functional groups on carbon black significantly enhances its crystallinity, dipolar orientation, and piezoelectric performance. Multiple characterization techniques were used to investigate the crystalline quality, chemical structure, and morphology of the composite P(VDF-TrFE)/CB films, which indicated no significant changes in these parameters. However, some increase in surface roughness was observed when the CB content increased. With the application of an external force, the piezoelectrically generated voltage was found to systematically increase with higher CB content, reaching a maximum value at 0.6 wt.%, after which the sample exhibited low resistance. The piezoelectric voltage produced by the unpoled 0.6 wt.% CB composite film significantly exceeded the unpoled pure P(VDF-TrFE) film when subjected to the same applied strain. Furthermore, it exhibited exceptional stability in the piezoelectric voltage over time, exceeding the output voltage of the poled pure P(VDF-TrFE) film. Notably, P(VDF_TrFE)/CB composite-based devices can be used in energy harvesting and piezoelectric strain sensing to monitor human motions, which has the potential to positively impact the field of smart wearable devices.

| S-EPMC10610547 | biostudies-literature

Vertically aligned P(VDF-TrFE) core-shell structures on flexible pillar arrays.

Project description:PVDF and P(VDF-TrFE) nano- and micro- structures have been widely used due to their potential applications in several fields, including sensors, actuators, vital sign transducers, and energy harvesters. In this study, we developed vertically aligned P(VDF-TrFE) core-shell structures using high modulus polyurethane acrylate (PUA) pillars as the support structure to maintain the structural integrity. In addition, we were able to improve the piezoelectric effect by 1.85 times from 40 ± 2 to 74 ± 2 pm/V when compared to the thin film counterpart, which contributes to the more efficient current generation under a given stress, by making an effective use of the P(VDF-TrFE) thin top layer as well as the side walls. We attribute the enhancement of piezoelectric effects to the contributions from the shell component and the strain confinement effect, which was supported by our modeling results. We envision that these organic-based P(VDF-TrFE) core-shell structures will be used widely as 3D sensors and power generators because they are optimized for current generations by utilizing all surface areas, including the side walls of core-shell structures.

| S-EPMC4455118 | biostudies-literature

Enhanced Power Generation by Piezoelectric P(VDF-TrFE)/rGO Nanocomposite Thin Film

Project description:In this study we fabricated a piezoelectric nanogenerator (PENG) of nanocomposite thin film comprising a conductive nanofiller of reduced graphene oxide (rGO) dispersed in a poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) matrix that was anticipated to show enhanced energy harvest performance. For the film preparation we employed the Langmuir-Schaefer (LS) technique to provide direct nucleation of the polar β-phase without any traditional polling or annealing process. We prepared five PENGs consisting of the nanocomposite LS films with different rGO contents in the P(VDF-TrFE) matrix and optimized their energy harvest performance. We found that the rGO-0.002 wt% film yielded the highest peak-peak open-circuit voltage (VOC) of 88 V upon bending and releasing at 2.5 Hz frequency, which was more than two times higher than the pristine P(VDF-TrFE) film. This optimized performance was explained by increased β-phase content, crystallinity, and piezoelectric modulus, and improved dielectric properties, based on scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), x-ray diffraction (XRD), piezoelectric modulus, and dielectric property measurement results. This PENG with enhanced energy harvest performance has great potential in practical applications for low energy power supply in microelectronics such as wearable devices.

| S-EPMC10005479 | biostudies-literature

Pronounced Surface Effects on the Curie Transition Temperature in Nanoconfined P(VDF-TrFE) Crystals.

Project description:Changes in the Curie transition temperature of nanoconfined poly(vinylidene fluoride-trifluoroethylene) P(VDF-TrFE) copolymers can have a severe impact on the electroactive behavior and the application range of these materials. Therefore, the origin of the change in the Curie transition temperature requires a profound understanding. In this work, block copolymer self-assembly into a spherical morphology proves to be a viable method to effectively confine P(VDF-TrFE) in three dimensions for studying the effect of nanoconfinement on the Curie transition. Using differential scanning calorimetry and wide-angle X-ray scattering, easily accessible experimental techniques, we follow the crystalline phase transitions, showing that confining P(VDF-TrFE) in a nonpolar polystyrene (PS) or poly(4-tert-butoxystyrene) (PtBOS) matrix results in an increase of the Curie transition upon cooling and heating. However, when a more polar matrix is used to nanoconfine P(VDF-TrFE), the Curie transition temperature is drastically reduced due to surface effects.

| S-EPMC6581470 | biostudies-literature

Flexible Pressure Sensors Based on P(VDF-TrFE) Films Incorporated with Ag@PDA@PZT Particles.

Project description:Films of piezoelectric poly(vinylidene fluoride) (PVDF) and its copolymer P(VDF-TrFE) have been studied intensively for their potential application in piezoelectric sensing devices. The present work focuses on tuning the piezoelectric properties of P(VDF-TrFE) films via incorporating Ag and polydopamine co-decorated PZT (Ag@PDA@PZT) particles. Ag@PDA@PZT particles can effectively improve the β-phase content and piezoelectric properties of P(VDF-TrFE) films. The highest open-circuit voltage and short-circuit current of P(VDF-TrFE)-based flexible pressure sensors incorporating Ag@PDA@PZT particles are ~30 V and ~2.4 μA, respectively. The flexible sensors exhibit a response to different body movements, providing a practical and potentially useful basis for human-machine interface applications.

| S-EPMC11359586 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data