Dataset Information

Influence of temperature, relative humidity, and water saturation on airborne emissions from cigarette butts.

ABSTRACT: With five trillion generated per year, cigarette butts are some of the most common litter worldwide. However, despite the potential environmental and human health risks from cigarette butts, little effort has been made to understand airborne emissions from cigarette butts. This study examined the influence of temperature, relative humidity and water saturation on airborne chemical emissions from cigarette butts. Experiments were conducted to measure the emitted chemical masses from butts using headspace analysis after the butts were conditioned in a controlled chamber under four conditions (30 °C and 25% relative humidity (RH), 30 °C and 50% RH, 40 °C and 25% RH, 40 °C and 50% RH) and in an outdoor environment (two sets of experiments in both summer and winter). The measured target chemicals included furfural, styrene, ethylbenzene, 2-methyl-2-cyclopenten-1-one, limonene, naphthalene, triacetin, and nicotine. Results indicate that increased temperature increased the emission rates of all target chemicals from the butts conditioned in both chambers and outdoors. In addition, water has considerable influence on the emission rates from the butts. Seven of the eight chemicals were emitted faster from butts at 50% RH compared to 25% RH. During water saturation, chemicals with high water solubility and partition coefficient between water and air, e.g., triacetin and nicotine, mainly migrate into the surrounding environment via aqueous rather than airborne routes. This highlights the importance of rainfall events on airborne emission variability for triacetin and nicotine. Water saturation increased the decay rate (decreased the decay time) of emitted mass measured in headspace analysis for the two carbonyl chemicals: furfural and 2-methyl-2-cyclopenten-1-one, while it decreased the decay rate (increased the decay time) for the three hydrocarbons (styrene, limonene, and naphthalene).

SUBMITTER: Poppendieck D

PROVIDER: S-EPMC8077228 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Temperature and relative humidity have opposing effects on evaporative water loss, the likely mediator of the temperature-dependence of nephrolithiasis. However, prior studies considered only dry-bulb temperatures when estimating the temperature-dependence of nephrolithiasis. We used distributed lag non-linear models and repeated 10-fold cross-validation to determine the daily temperature metric and corresponding adjustment for relative humidity that most accurately predicted kidney stone presentations during hot and cold periods in South Carolina from 1997 to 2015. We examined three metrics for wet-bulb temperatures and heat index, both of which measure the combination of temperature and humidity, and for dry-bulb temperatures: (1) daytime mean temperature; (2) 24-h mean temperature; and (3) most extreme 24-h temperature. For models using dry-bulb temperatures, we considered four treatments of relative humidity. Among 188,531 patients who presented with kidney stones, 24-h wet bulb temperature best predicted kidney stone presentation during summer. Mean cross-validated residuals were generally lower in summer for wet-bulb temperatures and heat index than the corresponding dry-bulb temperature metric, regardless of type of adjustment for relative humidity. Those dry-bulb models that additionally adjusted for relative humidity had higher mean residuals than other temperature metrics. The relative risk of kidney stone presentations at the 99th percentile of each temperature metric compared to the respective median temperature in summer months differed by temperature metric and relative humidity adjustment, and ranged from an excess risk of 8-14%. All metrics performed similarly in winter. The combination of temperature and relative humidity determine the risk of kidney stone presentations, particularly during periods of high heat and humidity. These results suggest that metrics that measure moist heat stress should be used to estimate the temperature-dependence of kidney stone presentations, but that the particular metric is relatively unimportant.

Project description:Coronavirus disease 2019 (COVID-19) was first identified in China in late 2019 and is caused by newly identified severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Previous studies had reported the stability of SARS-CoV-2 in cell culture media and deposited onto surfaces under a limited set of environmental conditions. Here, we broadly investigated the effects of relative humidity, temperature, and droplet size on the stability of SARS-CoV-2 in a simulated clinically relevant matrix dried on nonporous surfaces. The results show that SARS-CoV-2 decayed more rapidly when either humidity or temperature was increased but that droplet volume (1 to 50 ?l) and surface type (stainless steel, plastic, or nitrile glove) did not significantly impact decay rate. At room temperature (24°C), virus half-life ranged from 6.3 to 18.6?h depending on the relative humidity but was reduced to 1.0 to 8.9?h when the temperature was increased to 35°C. These findings suggest that a potential for fomite transmission may persist for hours to days in indoor environments and have implications for assessment of the risk posed by surface contamination in indoor environments.IMPORTANCE Mitigating the transmission of SARS-CoV-2 in clinical settings and public spaces is critically important to reduce the number of COVID-19 cases while effective vaccines and therapeutics are under development. SARS-CoV-2 transmission is thought to primarily occur through direct person-to-person transfer of infectious respiratory droplets or through aerosol-generating medical procedures. However, contact with contaminated surfaces may also play a significant role. In this context, understanding the factors contributing to SARS-CoV-2 persistence on surfaces will enable a more accurate estimation of the risk of contact transmission and inform mitigation strategies. To this end, we have developed a simple mathematical model that can be used to estimate virus decay on nonporous surfaces under a range of conditions and which may be utilized operationally to identify indoor environments in which the virus is most persistent.

Dataset Information

Influence of temperature, relative humidity, and water saturation on airborne emissions from cigarette butts.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets