Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Progress on AlGaN-based solar-blind ultraviolet photodetectors and focal plane arrays.

ABSTRACT: Solar-blind ultraviolet (UV) photodetectors (PDs) have attracted tremendous attention in the environmental, industrial, military, and biological fields. As a representative III-nitride material, AlGaN alloys have broad development prospects in the field of solar-blind detection due to their superior properties, such as tunable wide bandgaps for intrinsic UV detection. In recent decades, a variety of AlGaN-based PDs have been developed to achieve high-precision solar-blind UV detection. As integrated optoelectronic technology advances, AlGaN-based focal plane arrays (FPAs) are manufactured and exhibit outstanding solar-blind imaging capability. Considering the rapid development of AlGaN detection techniques, this paper comprehensively reviews the progress on AlGaN-based solar-blind UV PDs and FPAs. First, the basic physical properties of AlGaN are presented. The epitaxy and p-type doping problems of AlGaN alloys are then discussed. Diverse PDs, including photoconductors and Schottky, metal-semiconductor-metal (MSM), p-i-n, and avalanche photodiodes (APDs), are demonstrated, and the physical mechanisms are analyzed to improve device performance. Additionally, this paper summarizes imaging technologies used with AlGaN FPAs in recent years. Benefiting from the development of AlGaN materials and optoelectronic devices, solar-blind UV detection technology is greeted with significant revolutions. Summarizing recent advances in the processing and properties of AlGaN-based solar-blind UV PDs and FPAs as well as AlGaN growth and doping techniques.

SUBMITTER: Cai Q

PROVIDER: S-EPMC8087770 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Solar-blind photodetectors for harsh electronics.

Project description:We demonstrate solar-blind photodetectors (PDs) by employing AlN thin films on Si(100) substrates with excellent temperature tolerance and radiation hardness. Even at a bias higher than 200 V the AlN PDs on Si show a dark current as low as ~ 1 nA. The working temperature is up to 300°C and the radiation tolerance is up to 10(13) cm(-2) of 2-MeV proton fluences for AlN metal-semiconductor-metal (MSM) PDs. Moreover, the AlN PDs show a photoresponse time as fast as ~ 110 ms (the rise time) and ~ 80 ms (the fall time) at 5 V bias. The results demonstrate that AlN MSM PDs hold high potential in next-generation deep ultraviolet PDs for use in harsh environments.

| S-EPMC3769657 | biostudies-other

AlGaN Nanowires for Ultraviolet Light-Emitting: Recent Progress, Challenges, and Prospects.

Project description:In this paper, we discuss the recent progress made in aluminum gallium nitride (AlGaN) nanowire ultraviolet (UV) light-emitting diodes (LEDs). The AlGaN nanowires used for such LED devices are mainly grown by molecular beam epitaxy (MBE) and metalorganic chemical vapor deposition (MOCVD); and various foreign substrates/templates have been investigated. Devices on Si so far exhibit the best performance, whereas devices on metal and graphene have also been investigated to mitigate various limitations of Si substrate, e.g., the UV light absorption. Moreover, patterned growth techniques have also been developed to grow AlGaN nanowire UV LED structures, in order to address issues with the spontaneously formed nanowires. Furthermore, to reduce the quantum confined Stark effect (QCSE), nonpolar AlGaN nanowire UV LEDs exploiting the nonpolar nanowire sidewalls have been demonstrated. With these recent developments, the prospects, together with the general challenges of AlGaN nanowire UV LEDs, are discussed in the end.

| S-EPMC7074201 | biostudies-literature

Solar-blind ultraviolet-C persistent luminescence phosphors.

Project description:Visible-light and infrared-light persistent phosphors are extensively studied and are being used as self-sustained glowing tags in darkness. In contrast, persistent phosphors for higher-energy, solar-blind ultraviolet-C wavelengths (200-280?nm) are lacking. Also, persistent tags working in bright environments are not available. Here we report five types of Pr3+-doped silicates (melilite, cyclosilicate, silicate garnet, oxyorthosilicate, and orthosilicate) ultraviolet-C persistent phosphors that can act as self-sustained glowing tags in bright environments. These ultraviolet-C persistent phosphors can be effectively charged by a standard 254?nm lamp and emit intense, long-lasting afterglow at 265-270?nm, which can be clearly monitored and imaged by a corona camera in daylight and room light. Besides thermal-stimulation, in bright environments, photo-stimulation also contributes to the afterglow emission and its contribution can be dominant when ambient light is strong. This study expands persistent luminescence research to the ultraviolet-C wavelengths and brings persistent luminescence applications to light.

| S-EPMC7184723 | biostudies-literature

On the p-AlGaN/n-AlGaN/p-AlGaN Current Spreading Layer for AlGaN-based Deep Ultraviolet Light-Emitting Diodes.

Project description:In this report, AlGaN-based deep ultraviolet light-emitting diodes (DUV LEDs) with different p-AlGaN/n-AlGaN/p-AlGaN (PNP-AlGaN) structured current spreading layers have been described and investigated. According to our results, the adopted PNP-AlGaN structure can induce an energy barrier in the hole injection layer that can modulate the lateral current distribution. We also find that the current spreading effect can be strongly affected by the thickness, the doping concentration, the PNP loop, and the AlN composition for the inserted n-AlGaN layer. Therefore, if the PNP-AlGaN structure is properly designed, the forward voltage, the external quantum efficiency, the optical power, and the wall-plug efficiency for the proposed DUV LEDs can be significantly improved as compared with the conventional DUV LED without the PNP-AlGaN structure.

| S-EPMC6223402 | biostudies-other

Surface-Engineered Nanostructure-Based Efficient Nonpolar GaN Ultraviolet Photodetectors.

Project description:Surface-engineered nanostructured nonpolar (112̅0) gallium nitride (GaN)-based high-performance ultraviolet (UV) photodetectors (PDs) have been fabricated. The surface morphology of a nonpolar GaN film was modified from pyramidal shape to flat and trigonal nanorods displaying facets along different crystallographic planes. We report the ease of enhancing the photocurrent (5.5-fold) and responsivity (6-fold) of the PDs using a simple and convenient wet chemical-etching-induced surface engineering. The fabricated metal-semiconductor-metal structure-based surface-engineered UV PD exhibited a significant increment in detectivity, that is, from 0.43 to 2.83 (×108) Jones, and showed a very low noise-equivalent power (∼10-10 W Hz-1/2). The reliability of the nanostructured PD was ensured via fast switching with a response and decay time of 332 and 995 ms, which were more than five times faster with respect to the unetched pyramidal structure-based UV PD. The improvement in device performance was attributed to increased light absorption, efficient transport of photogenerated carriers, and enhancement in conduction cross section via elimination of recombination/trap centers related to defect states. Thus, the proposed method could be a promising approach to enhance the performance of GaN-based PD technology.

| S-EPMC6641413 | biostudies-literature

Ferroelectric Tuning of ZnO Ultraviolet Photodetectors.

Project description:The ferroelectric field effect transistor (Fe-FET) is considered to be one of the most important low-power and high-performance devices. It is promising to combine a ferroelectric field effect with a photodetector to improve the photodetection performance. This study proposes a strategy for ZnO ultraviolet (UV) photodetectors regulated by a ferroelectric gate. The ZnO nanowire (NW) UV photodetector was tuned by a 2D CuInP2S6 (CIPS) ferroelectric gate, which decreased the dark current and enhanced the responsivity and detectivity to 2.40 × 104 A/W and 7.17 × 1011 Jones, respectively. This strategy was also applied to a ZnO film UV photodetector that was tuned by a P(VDF-TrFE) ferroelectric gate. Lower power consumption and higher performance can be enabled by ferroelectric tuning of ZnO ultraviolet photodetectors, providing new inspiration for the fabrication of high-performance photodetectors.

| S-EPMC9565710 | biostudies-literature

An elegant route to overcome fundamentally-limited light extraction in AlGaN deep-ultraviolet light-emitting diodes: Preferential outcoupling of strong in-plane emission.

Project description:While there is an urgent need for semiconductor-based efficient deep ultraviolet (DUV) sources, the efficiency of AlGaN DUV light-emitting diodes (LEDs) remains very low because the extraction of DUV photons is significantly limited by intrinsic material properties of AlGaN. Here, we present an elegant approach based on a DUV LED having multiple mesa stripes whose inclined sidewalls are covered by a MgF2/Al omni-directional mirror to take advantage of the strongly anisotropic transverse-magnetic polarized emission pattern of AlGaN quantum wells. The sidewall-emission-enhanced DUV LED breaks through the fundamental limitations caused by the intrinsic properties of AlGaN, thus shows a remarkable improvement in light extraction as well as operating voltage. Furthermore, an analytic model is developed to understand and precisely estimate the extraction of DUV photons from AlGaN DUV LEDs, and hence to provide promising routes for maximizing the power conversion efficiency.

| S-EPMC4776099 | biostudies-literature

Sec-Eliminating the SARS-CoV-2 by AlGaN Based High Power Deep Ultraviolet Light Source.

Project description:The world-wide spreading of coronavirus disease (COVID-19) has greatly shaken human society, thus effective and fast-speed methods of non-daily-life-disturbance sterilization have become extremely significant. In this work, by fully benefitting from high-quality AlN template (with threading dislocation density as low as ≈6×108 cm-2) as well as outstanding deep ultraviolet (UVC-less than 280 nm) light-emitting diodes (LEDs) structure design and epitaxy optimization, high power UVC LEDs and ultra-high-power sterilization irradiation source are achieved. Moreover, for the first time, a result in which a fast and complete elimination of SARS-CoV-2 (the virus causes COVID-19) within only 1 s is achieved by the nearly whole industry-chain-covered product. These results advance the promising potential in UVC-LED disinfection particularly in the shadow of COVID-19.

| S-EPMC7744859 | biostudies-literature

Dual-functional ultraviolet photodetector with graphene electrodes on AlGaN/GaN heterostructure.

Project description:A dual-functional ultraviolet (UV) photodetector with a large UV-to-visible rejection ratio is presented, in which interdigitated finger-type two-dimensional graphene electrodes are introduced to an AlGaN/GaN heterostructure. Two photocurrent generation mechanisms of photovoltaic and photoconductive dominances coexist in the device. The dominance of the mechanisms changes with the induced bias voltage. Below a threshold voltage, the device showed fairly low responsivities but fast response times, as well as a constant photocurrent against the induced bias. However, the opposite characteristics appeared with high bias voltage. Specifically, above the threshold voltage, the device showed high responsivities with additional gain, but slow rise and recovery times. For instance, the responsivity of 10.9 A/W was observed with the gain of 760 at the induced bias voltage of 5 V. This unique multifunctionality enabled by the combination of an AlGaN/GaN heterostructure with graphene electrodes facilitates the development of a single device that can achieve multiple purposes of photodetection.

| S-EPMC7745009 | biostudies-literature

High-performance ultraviolet photodetectors based on solution-grown ZnS nanobelts sandwiched between graphene layers.

Project description:Ultraviolet (UV) light photodetectors constructed from solely inorganic semiconductors still remain unsatisfactory because of their low electrical performances. To overcome this limitation, the hybridization is one of the key approaches that have been recently adopted to enhance the photocurrent. High-performance UV photodetectors showing stable on-off switching and excellent spectral selectivity have been fabricated based on the hybrid structure of solution-grown ZnS nanobelts and CVD-grown graphene. Sandwiched structures and multilayer stacking strategies have been applied to expand effective junction between graphene and photoactive ZnS nanobelts. A multiply sandwich-structured photodetector of graphene/ZnS has shown a photocurrent of 0.115?mA under illumination of 1.2?mWcm(-2) in air at a bias of 1.0?V, which is higher 10(7) times than literature values. The multiple-sandwich structure of UV-light sensors with graphene having high conductivity, flexibility, and impermeability is suggested to be beneficial for the facile fabrication of UV photodetectors with extremely efficient performances.

| S-EPMC4510574 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data