Dataset Information

Experimental dataset on the tensile and compressive mechanical properties of plain Kraft and crepe papers used as insulation in power transformers after ageing in mineral oil.

ABSTRACT: The solid insulation in the windings of power transformers, which generally consists of oil-impregnated thin paper, is one of the key elements for the performance and durability of these electrical machines. Insulation paper is subjected to static and dynamic forces of electromagnetic origin, in combination with high temperatures and chemical reactions, during the operating life of a power transformer. The mechanical properties of the cellulosic insulation are relevant parameters because its breakage could result in the electric failure of the transformer. Indeed, paper manufacturers usually provide values of the tensile strength and elongation at breakage of the insulating paper in its two principal material directions, the MD (machine direction) and CD (cross-direction). However, paper is a highly anisotropic material and its material properties evolve as the paper insulation ages. The paper insulation in an operating transformer is subjected to a multiaxial stress state field including compressive and shear stresses. This article reports experimental data on the tensile and compressive mechanical properties of two types of paper, plain Kraft and crepe paper, typically used as insulation in power transformers, under different ageing states (which were induced through accelerated thermal ageing and quantified by means of the degree of polymerisation). These data could be reused for several purposes. They can improve the current understanding of the mechanical response and degradation processes of the cellulosic insulation in power transformers, and give some reference values that can be compared with others obtained in the factory by manufacturers. In the field of engineering failure analysis, those values could be reused for the assessment of mechanical failure of paper materials used in power transformers, see [1].

SUBMITTER: Oria C

PROVIDER: S-EPMC8093416 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:The expanding nasal septal cartilage is believed to create a force that powers midfacial growth. In addition, the nasal septum is postulated to act as a mechanical strut that prevents the structural collapse of the face under masticatory loads. Both roles imply that the septum is subject to complex biomechanical loads during growth and mastication. The purpose of this study was to measure the mechanical properties of the nasal septum to determine (1) whether the cartilage is mechanically capable of playing an active role in midfacial growth and in maintaining facial structural integrity and (2) if regional variation in mechanical properties is present that could support any of the postulated loading regimens. Porcine septal samples were loaded along the horizontal or vertical axes in compression and tension, using different loading rates that approximate the in vivo situation. Samples were loaded in random order to predefined strain points (2-10%) and strain was held for 30 or 120 seconds while relaxation stress was measured. Subsequently, samples were loaded until failure. Stiffness, relaxation stress and ultimate stress and strain were recorded. Results showed that the septum was stiffer, stronger and displayed a greater drop in relaxation stress in compression compared to tension. Under compression, the septum displayed non-linear behavior with greater stiffness and stress relaxation under faster loading rates and higher strain levels. Under tension, stiffness was not affected by strain level. Although regional variation was present, it did not strongly support any of the suggested loading patterns. Overall, results suggest that the septum might be mechanically capable of playing an active role in midfacial growth as evidenced by increased compressive residual stress with decreased loading rates. However, the low stiffness of the septum compared to surrounding bone does not support a strut role. The relatively low stiffness combined with high stress relaxation under fast loading rates suggests that the nasal septum is a stress dampener, helping to absorb and dissipate loads generated during mastication.

Project description:During orthodontic tooth movement (OTM) to therapeutically correct the position of misaligned teeth, thus improving oral health and quality of life, fibroblasts, macrophages, and other immune cells within the periodontal ligament (PDL), which connects a tooth to its surrounding bone, are exposed to compressive and tensile strain. While it is known that PDL fibroblasts are critically involved in the biological regulation of OTM by a mechanotransductively triggered release of cytokines, it is unclear whether macrophages also react to pressure and tension in a similar manner thus impacting on or mediating OTM. RAW264.7 macrophages were seeded onto conventional 6-well cell culture plates for pressure or on Bioflex plates for tension assays and preincubated for 24 h. For in vitro simulation of physiological orthodontic compressive or tensile strain for 2 h, 4 h, 24 h, and 48 h, glass discs (2 g/cm2) were placed or adherent macrophages isotropically stretched for 16%, respectively. We determined cell number, cytotoxicity, and gene/protein expression of Vegf-a/VEGF-A (macrophage-mediated angiogenesis), Mmp-8/9 (extracellular matrix reorganization), and Cox-2/PG-E2, Il-6/IL-6, and Tnf-α/TNF-α (proinflammatory mediators) by RT-qPCR and ELISA. Compressive but not tensile strain resulted in a significant reduction in cell number after only 2 h. Mmp-8 and Mmp-9 expression was significantly enhanced within 24 h of compressive and in part tensile strain. Significantly increased Vegf-a/VEGF-A expression was detected within 4 h of pressure, but not during application of tensile strain. Expression of proinflammatory mediators Cox-2/PG-E2, Il-6/IL-6, and Tnf-α/TNF-α was significantly increased as early as 2-4 h after application of compressive or tensile strain. Our results indicate that macrophages respond early on to compressive and tensile strain occurring during OTM with an enhanced gene expression of proinflammatory cytokines, which could affect PDL fibroblasts, osteoblasts, and immune cells triggering or enhancing the biological mechanisms and osteoclastogenesis underlying OTM.

Project description:It is generally accepted that inducing molecular alignment in a polymer precursor via mechanical stresses influences its graphitization during pyrolysis. However, our understanding of how variations of the imposed mechanics can influence pyrolytic carbon microstructure and functionality is inadequate. Developing such insight is consequential for different aspects of carbon MEMS manufacturing and applicability, as pyrolytic carbons are the main building blocks of MEMS devices. Herein, we study the outcomes of contrasting routes of stress-induced graphitization by providing a comparative analysis of the effects of compressive stress versus standard tensile treatment of PAN-based carbon precursors. The results of different materials characterizations (including scanning electron microscopy, Raman and X-ray photoelectron spectroscopies, as well as high-resolution transmission electron microscopy) reveal that while subjecting precursor molecules to both types of mechanical stresses will induce graphitization in the resulting pyrolytic carbon, this effect is more pronounced in the case of compressive stress. We also evaluated the mechanical behavior of three carbon types, namely compression-induced (CIPC), tension-induced (TIPC), and untreated pyrolytic carbon (PC) by Dynamic Mechanical Analysis (DMA) of carbon samples in their as-synthesized mat format. Using DMA, the elastic modulus, ultimate tensile strength, and ductility of CIPC and TIPC films are determined and compared with untreated pyrolytic carbon. Both stress-induced carbons exhibit enhanced stiffness and strength properties over untreated carbons. The compression-induced films reveal remarkably larger mechanical enhancement with the elastic modulus 26 times higher and tensile strength 2.85 times higher for CIPC compared to untreated pyrolytic carbon. However, these improvements come at the expense of lowered ductility for compression-treated carbon, while tension-treated carbon does not show any loss of ductility. The results provided by this report point to the ways that the carbon MEMS industry can improve and revise the current standard strategies for manufacturing and implementing carbon-based micro-devices.

Dataset Information

Experimental dataset on the tensile and compressive mechanical properties of plain Kraft and crepe papers used as insulation in power transformers after ageing in mineral oil.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets