Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Technical Note for Transfemoral Implantation of Tapered Revision Stems. The Advantage to Stay Short.

ABSTRACT:

Background

The aim was to test the hypothesis that during transfemoral implantation of a conical revision stem, the fixation of the stem at the distal tip leads to a low rate of periprosthetic fractures.

Material and methods

Two hundred eighty-two stem revisions by a transfemoral approach in cases of Paprosky Type II and IIIA-defects (with a sufficient isthmus) were carried out and analyzed during and radiographically after the surgery for unintentional periprosthetic fractures below the osteotomy.

Results

In all cases, fixation was always achieved at the tip of the distal component in the isthmus of the femur. No periprosthetic fractures were observed.

Conclusions

When the isthmus of the femur is intact, a transfemoral implantation of a tapered revision stem at the distal end reduces the risk of periprosthetic fractures by preventing bypassing the isthmus with the stem. Knowing the difference between the nominal diameter and the diameter at the distal start of the conical zone can help to create this fixation technique resulting in short revision stems.

SUBMITTER: Fink B

PROVIDER: S-EPMC8099717 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Fracture risk of tapered modular revision stems: a failure analysis.

Project description:Fractures of well-ingrown femoral components are a rare and often challenging complication after revision total hip arthroplasty. Prior series have documented catastrophic failure at the modular junction of revision femoral components. However, to the authors' knowledge, there has been only 1 report of a mid-stem fracture of a modular tapered revision stem. The present article reports 2 cases of fatigue fractures (14 months and 10 years after implantation) of a tapered modular revision stem. It presents the results of the fracture surface analysis, discusses the etiology of failure, and presents the authors' recommendations on how to best avoid this complication.

| S-EPMC6123177 | biostudies-literature

Arthroscopic Minced Cartilage Implantation (MCI): A Technical Note.

Project description:Articular cartilage lesions are identified with increasing frequency. Several cartilage repair techniques are available to treat symptomatic cartilage defects. The ultimate goal of any cartilage repair procedure is the prevention of premature osteoarthritis. Autologous chondrocyte implantation provides the best tissue quality. However, 2 operations and a resource-intense culturing process with high regulatory demands are disadvantages of this cartilage repair procedure. Furthermore, cellular dedifferentiation and senescence display further cell culture-associated drawbacks that hamper the procedure. Minced cartilage implantation is a relatively simple and cost-effective one-step procedure with promising biologic potential and satisfying clinical results. We present an arthroscopic surgical technique where the surgeon can apply autologous chondrocytes in a one-step procedure to treat articular cartilage defects at the knee joint.

| S-EPMC7823081 | biostudies-literature

Tapered modular fluted titanium stems for femoral fixation in revision total knee arthroplasty.

Project description:Consensus regarding femoral stem fixation options in revision total knee arthroplasty remains controversial. Tapered, modular, fluted titanium (TMFT) stems have an excellent track record in total hip arthroplasty for their ability to provide axial and rotational stability in situations of compromised host bone. We present 3 successfully treated cases in which the Food & Drug Administration granted permission to use custom TMFT stems in situations of failed femoral fixation in multiple revised knees. These stems hold promise to achieve stable fixation in revision total knee arthroplasty where host metadiaphyseal bone is deficient. Implant manufactures should consider dedicating future resources to create adapters that can link existing successful TMFT stems currently used in hip arthroplasty to revision total knee components when host bone is severely compromised.

| S-EPMC5859738 | biostudies-literature

Minced Cartilage Implantation for a Cystic Defect on the Femoral Head-Technical Note.

Project description:Chondral injuries of the femoral head and their possible progression to osteoarthritis is well known. Regarding focal lesions in young patients, microfracturing or autologous chondrocyte implantation (ACI) are the most frequent used techniques to address them. Although ACI provides the better tissue quality, it is a two-step procedure and needs a lot of resources. Mincing cartilage is an old technique that has become popular again over the last few years, with good short-term results in threatening cartilage lesion in the knee. It seems intriguing to transfer this technique to the hip because you can harvest good-quality cartilage from the cam lesion, and it is a one-step procedure using autologous thrombin and fibrin. This technical note describes the repair of a parafoveal chondral defect using minced cartilage via surgical dislocation of the hip.

| S-EPMC8556668 | biostudies-literature

Arthroscopic Minced Cartilage Implantation for Chondral Lesions at the Talus: A Technical Note.

Project description:In the past few years, autologous chondrocyte implantation has been shown to be the most suitable cartilage reconstructive technique with the best tissue quality. Although this method is part of the standard surgical repertoire in the knee joint, it has so far not been an established method in the ankle because there are no prospective randomized controlled studies to prove a significant advantage over alternative methods of cartilage repair. The methods most frequently used in this context (e.g., marrow stimulation techniques) can, however, at most generate hyaline-like and thus biomechanically inferior regenerates. Minced cartilage implantation, on the other hand, is a relatively simple and cost-effective 1-step procedure with promising biological potential and-at least in the knee joint-satisfactory clinical results. We present an arthroscopic surgical technique by which the surgeon can apply autologous chondrocytes in a 1-step procedure (AutoCart; Arthrex, Munich, Germany) to treat articular cartilage defects in the ankle joint.

| S-EPMC8085507 | biostudies-literature

Do Cementless Short Tapered Stems Reduce the Incidence of Thigh Pain After Hip Arthroplasty? Systematic Review and Meta-Analysis.

Project description:BackgroundThe purpose of this study was to determine whether short tapered stems reduce the rate of thigh pain through a systematic review and meta-analysis of comparative studies between short tapered stems and standard-length tapered stems.MethodsWe conducted a meta-analysis of comparative studies: 1) retrospective studies and 2) randomized controlled trials (RCTs), on 2 stem designs: short tapered stem versus standard-length tapered stem. Studies were selected by means of the following criteria: 1) study design: retrospective comparative studies, prospective comparative studies, RCTs; 2) study population: patients with total hip arthroplasty or hemiarthroplasty for hip disease or hip fracture; 3) intervention: short tapered stem and standard tapered stem; and 4) outcomes; thigh pain, other clinical results.ResultsAmong the 250 articles that were identified at the initial search, 6 studies, 4 RCTs and 2 retrospective comparative studies, were included in this meta-analysis. In the analysis of retrospective studies, the short tapered stem reduced the risk of thigh pain compared to the standard tapered stem (risk ratio [RR] = 0.13; 95% confidence interval [CI], 0.02-0.09; Z = -2.07; P = 0.039). However, in the analysis of RCTs, the incidence of thigh pain was similar between the two stem designs (RR = 1.21; 95% CI, 0.76-1.93; Z = 0.82; P = 0.410). Overall meta-analysis including all studies showed that the short tapered stem did not reduce the incidence of thigh pain compared to the standard-length tapered stem (RR = 0.91; 95% CI, 0.59-1.40; Z = -0.44, P = 0.663).ConclusionsWe did not find a significant difference in the incidence of thigh pain between short tapered stem and standard tapered stem in hip arthroplasty.Trial registrationPROSPERO Identifier: CRD42021231240.

| S-EPMC8845099 | biostudies-literature

Transfemoral leadless pacemaker implantation after transcatheter tricuspid valve in ring implantation.

Project description: Not available

| S-EPMC10808522 | biostudies-literature

Novel expandable short dental implants in situations with reduced vertical bone height-technical note and first results.

Project description:PURPOSE:Short implants often have the disadvantage of reduced primary stability. The present study was conducted to evaluate the feasibility and safety of a new expandable short dental implant system intended to increase primary stability. METHODS:As a "proof of concept", a prospective clinical cohort study was designed to investigate intraoperative handling, primary and secondary implant stability (resonance frequency analysis), crestal bone changes, implant survival and implant success, of an innovative short expandable screw implant. From 2014 until 2015, 9 patients (7-9-mm vertical bone height) with 30 implants (length 5-7 mm, diameter 3.75-4.1 mm) were recruited consecutively. RESULTS:All 30 implants in the 9 patients (age 44 to 80 years) could be inserted and expanded without intraoperative problems. Over the 3-year follow-up period, the implant success rate was 28/30 (93.3%). The mean implant stability quotients (ISQ) were as follows: primary stability, 69.7?±?10.3 ISQ units, and secondary stability, 69.8?±?10.2 ISQ units (p?=?0.780), both without significant differences between the maxilla and mandible (p???0.780). The mean crestal bone changes after loading were (each measured from the baseline) as follows: in the first year, 1.0?±?0.9 mm in the maxilla and 0.7?±?0.4 mm in the mandible, and in the second year, 1.3?±?0.8 mm and 1.0?±?0.7 mm, respectively. CONCLUSIONS:Compared to other prospective studies, in this indication, the success rate is acceptable. Implant stability shows high initial and secondary stability values. The system might present an extension of functional rehabilitation to the group of elderly patients with limited vertical bone height. Further long-term investigations should directly compare this compressive implant with standard short implants.

| S-EPMC5662521 | biostudies-literature

Working Cannula-Based Endoscopic Foraminoplasty: A Technical Note.

Project description:PurposePercutaneous endoscopic lumbar discectomy (PELD) is a minimally invasive disc surgery that can be performed under local anesthesia and requires only an eight-mm skin incision. For the patients with lumbar foraminal stenosis, the migrated disc is difficult to remove with a simple transforaminal approach. In such cases, the foraminoplasty techniques can be used. However, obtaining efficient foramen enlargement while minimizing radiation exposure and protecting the nerves can be challenging.MethodsIn this study, we propose a new technique called the Kiss-Hug maneuver. Under endoscopic viewing, we used the bevel tip of a working cannula as a bone reamer to enlarge the foramen. This allowed us to efficiently enlarge the lumbar foramen endoscopically without the redundancy and complications associated with reamers or trephines.ResultsDetails of the four steps of the Kiss-Hug maneuver are reported along with adverse events. The advantages of this new technique include minimizing radiation exposure to both the surgeon and the patient and decreasing the overall operation time.ConclusionThe endoscopic Kiss-Hug maneuver is a useful and reliable foraminoplasty technique that can enhance the efficiency of foraminoplasty while ensuring patient safety and reducing radiation exposure.

| S-EPMC6323537 | biostudies-literature

Technical note: A collision prediction tool using Blender.

Project description:Non-coplanar radiotherapy treatment techniques on C-arm linear accelerators have the potential to reduce dose to organs-at-risk in comparison with coplanar treatment techniques. Accurately predicting possible collisions between gantry, table and patient during treatment planning is needed to ensure patient safety. We offer a freely available collision prediction tool using Blender, a free and open-source 3D computer graphics software toolset. A geometric model of a C-arm linear accelerator including a library of patient models is created inside Blender. Based on the model, collision predictions can be used both to calculate collision-free zones and to check treatment plans for collisions. The tool is validated for two setups, once with and once without a full body phantom with the same table position. For this, each gantry-table angle combination with a 2° resolution is manually checked for collision interlocks at a TrueBeam system and compared to simulated collision predictions. For the collision check of a treatment plan, the tool outputs the minimal distance between the gantry, table and patient model and a video of the movement of the gantry and table, which is demonstrated for one use case. A graphical user interface allows user-friendly input of the table and patient specification for the collision prediction tool. The validation resulted in a true positive rate of 100%, which is the rate between the number of correctly predicted collision gantry-table combinations and the number of all measured collision gantry-table combinations, and a true negative rate of 89%, which is the ratio between the number of correctly predicted collision-free combinations and the number of all measured collision-free combinations. A collision prediction tool is successfully created and able to produce maps of collision-free zones and to test treatment plans for collisions including visualisation of the gantry and table movement.

| S-EPMC10647990 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data