Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Numerical and experimental studies on dynamic gas emission characteristics of boreholes.

ABSTRACT: The gas emission rate of boreholes is one of the most important indices for coal and gas outburst prediction. In this work, instantaneous gas emission velocity and environmental effects on borehole gas emission were studied. Through theoretical analysis, the mechanism of crack propagation in the coal borehole was clarified, and the effect of soft and hard coal on gas desorption and gas emission. The results of numerical simulations also indicated that the initial gas emission has a function relationship to the drilling distance and the physical characteristics of the coal seam. A novel dynamic testing technology was proposed to obtain gas emission velocity. Laboratory experiments under adsorption and desorption of CO2 and N2 were performed using coal samples from Xuehu, Fenghui, Weishe, and Wuzhong coal mines. The data of initial gas emission under different coal samples were recorded, and the fitting curves were obtained. The results show a positive correlation between initial gas emission and drilling depth. However, abnormal would occur when the drill pipe enters the soft stratification, and the maximum value of the initial gas emission of the abnormal part is 3.8 times the normal value, which indicates a high degree of sensibility to soft stratification. The results were revealed the dynamic gas emission law of boreholes.

SUBMITTER: Lin H

PROVIDER: S-EPMC8104414 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Experimental Studies and Numerical Simulation of Polypyrrole Trilayer Actuators.

Project description:Conducting polymer actuators have shown wide application prospects in the field of biomedical sensors and micro-/nanorobotics. In order to explore more applications in biomedical sensing and robotics, it is essential to understand the actuator static behavior from an engineering perspective, before incorporating them into a design. In this article, we have established the mathematical model of a trilayer polypyrrole (PPy) cantilever actuator and validated it experimentally. The model helps in enhancing the efficiency and in improving the performance, predictability, and control of the actuator. The thermal expansion analogy, which is similar to volume change of the multilayer PPy actuator due to ion migration, has been considered to develop a mathematical model in COMSOL Multiphysics. To further validate the actuator deformation predicted by the mathematical modeling, a multilayer PPy actuator was fabricated by electrochemical synthesis and the experimentally determined deflection of the actuator was compared to simulation data. Both the theoretical and experimental results depict that the model is effective for predicting the bending behavior of multilayer PPy actuators at different input voltages.

| S-EPMC6648300 | biostudies-literature

Experimental and numerical studies on wave breaking characteristics over a fringing reef under monochromatic wave conditions.

Project description:Fringing reefs play an important role in protecting the coastal area by inducing wave breaking and wave energy dissipation. However, modeling of wave transformation and energy dissipation on this topography is still difficult due to the unique structure. In the present study, two-dimensional laboratory experiments were conducted to investigate the cross-shore variations of wave transformation, setup, and breaking phenomena over an idealized fringing reef with the 1/40 reef slope and to verify the Boussinesq model under monochromatic wave conditions. One-layer and two-layer model configurations of the Boussinesq model were used to figure out the model capability. Both models predicted well (r (2) > 0.8) the cross-shore variation of the wave heights, crests, troughs, and setups when the nonlinearity is not too high (A 0/h 0 < 0.07 in this study). However, as the wave nonlinearity and steepness increase, the one-layer model showed problems in prediction and stability due to the error on the vertical profile of fluid velocity. The results in this study revealed that one-layer model is not suitable in the highly nonlinear wave condition over a fringing reef bathymetry. This data set can contribute to the numerical model verification.

| S-EPMC4170828 | biostudies-other

Experimental and numerical studies on combustion characteristics of N2-diluted CH4 and O2 diffusion combustion in a packed bed.

Project description:Experimental and numerical studies were conducted to determine the combustion characteristics of gas diffusion combustion in a porous combustor packed with 2.5 mm or 3.5 mm alumina pellets, special attention being focused on the effect of packed bed height (h) on combustion, NO and CO emissions. The pollutant emission of diffusion filtration combustion is studied with different packed bed lengths in the range of 40 mm ? h ? 240 mm, fixed excess air ratio of 1.88 and fixed gas inlet velocity of 0.06 m s-1. Results show that both immersed and surface flames coexist in the combustor. Although porous media enhance the mixing and diffusion processes, the diffusion flame shape is still observed from the side and top views of the combustor, and the diffusion filtration retains properties of diffusion combustion. The immersed flame is always observed with increase in h, whereas the height of surface flame decreases. The NO emission decreases sharply when h is increased from 40 mm to 120 mm. However, the NO emission decreases slightly when h > 120 mm. In the investigated range of h, it is shown that h has a significant influence on the CO emission, an increase in h leading to a constant increase in CO for the combustors packed with 2.5 mm or 3.5 mm pellets. The maximum CO emission is 662 ppm and the minimum value is 67 ppm. In the scope of this study, the temperature on the external wall of the combustor reaches 434-513°C.

| S-EPMC6774936 | biostudies-literature

Experimental and numerical studies on standing surface acoustic wave microfluidics.

Project description:Standing surface acoustic waves (SSAW) are commonly used in microfluidics to manipulate cells and other micro/nano particles. However, except for a simple one-dimensional (1D) harmonic standing waves (HSW) model, a practical model that can predict particle behaviour in SSAW microfluidics is still lacking. Herein, we established a two-dimensional (2D) SSAW microfluidic model based on the basic theory in acoustophoresis and our previous modelling strategy to predict the acoustophoresis of microparticles in SSAW microfluidics. This 2D SSAW microfluidic model considers the effects of boundary vibrations, channel materials, and channel dimensions on the acoustic propagation; as an experimental validation, the acoustophoresis of microparticles under continuous flow through narrow channels made of PDMS and silicon was studied. The experimentally observed motion of the microparticles matched well with the numerical predictions, while the 1D HSW model failed to predict many of the experimental observations. Particularly, the 1D HSW model cannot account for particle aggregation on the sidewall in PDMS channels, which is well explained by our 2D SSAW microfluidic model. Our model can be used for device design and optimization in SSAW microfluidics.

| S-EPMC4856433 | biostudies-literature

Numerical and experimental study of pyrophoric activated metal Mg surface combustion characteristics.

Project description:The combustion of multi-hole pyrophoric activated metal is solid combustion and the combustion mechanism is quite complex, which is a difficult problem to be solved. Once the pyrophoric activated metal is exposed to air, the oxygen diffuses to the interior of the activated metal within plenty of holes and reacts with it, which enlarges the contact area with oxygen. Consequently, the whole combustion is vigorous and the temperature rises rapidly. To study the combustion mechanism of the chaff, the surface heat balance equation is established in this work by taking Mg as the activated metal. To solve this equation, the chaff adiabatic wall temperature distribution is computed by computational fluid dynamics in the presence of high-speed airflow. Then, the chaff surface temperature distribution is obtained by solving the heat balance equations. Finally, numerical and experimental results obtained via an infrared thermal imager are compared to demonstrate the effectiveness of the established equation.

| S-EPMC5990799 | biostudies-literature

Experimental and numerical investigations on spray characteristics of fatty acid methyl esters.

Project description:A comparative experimental and numerical study is conducted to establish the significance of the use of single-component over multi-component representatives of biodiesel, diesel and their blend for predicting spray tip penetration. Methyl oleate and methyl laurate are used as single-component representative fuels for biodiesel. The pure components n-heptane, n-dodecane and n-tetradecane are used as single-component representative fuels for diesel. Methyl laurate is found to represent biodiesel of coconut, whereas methyl oleate is found to represent biodiesel having high percentage of long-chain fatty acid esters. The spray tip penetration of methyl oleate is found to be in good agreement with the measured spray tip penetration of karanja biodiesel. The spray tip penetration prediction of n-heptane fuel is closely following diesel spray tip penetration along with that of n-tetradecane and n-dodecane. The study suggests that the knowledge of the single-component representatives of biodiesel, diesel and their blend is sufficient to predict the spray tip penetration of the corresponding biodiesel, diesel and their blend under non-evaporating environment.

| S-EPMC5830724 | biostudies-literature

Convenient, rapid and accurate measurement of SVOC emission characteristics in experimental chambers.

Project description:Chamber tests are usually used to determine the source characteristics of semi-volatile organic compounds (SVOCs) which are critical to quantify indoor exposure to SVOCs. In contrast to volatile organic compounds (VOCs), the sorption effect of SVOCs to chamber surfaces usually needs to be considered due to the much higher surface/air partition coefficients, resulting in a long time to reach steady state, frequently on the order of months, and complicating the mathematical analysis of the resulting data. A chamber test is also complicated if the material-phase concentration is not constant. This study shows how to design a chamber to overcome these limitations. A dimensionless mass transfer analysis is used to specify conditions for (1) neglecting the SVOC sorption effect to chamber surfaces, (2) neglecting the convective mass transfer resistance at sorption surfaces if the sorption effect cannot be neglected, and (3) regarding the material-phase concentration in the source as constant. Several practical and quantifiable ways to improve chamber design are proposed. The approach is illustrated by analyzing available data from three different chambers in terms of the accuracy with which the model parameters can be determined and the time needed to conduct the chamber test. The results should greatly facilitate the design of chambers to characterize SVOC emissions and the resulting exposure.

| S-EPMC3756072 | biostudies-literature

Dynamic Characteristics of Ventilatory and Gas Exchange during Sinusoidal Walking in Humans.

Project description:Our present study investigated whether the ventilatory and gas exchange responses show different dynamics in response to sinusoidal change in cycle work rate or walking speed even if the metabolic demand was equivalent in both types of exercise. Locomotive parameters (stride length and step frequency), breath-by-breath ventilation (V̇E) and gas exchange (CO2 output (V̇CO2) and O2 uptake (V̇O2)) responses were measured in 10 healthy young participants. The speed of the treadmill was sinusoidally changed between 3 km·h-1 and 6 km·h-1 with various periods (from 10 to 1 min). The amplitude of locomotive parameters against sinusoidal variation showed a constant gain with a small phase shift, being independent of the oscillation periods. In marked contrast, when the periods of the speed oscillations were shortened, the amplitude of V̇E decreased sharply whereas the phase shift of V̇E increased. In comparing walking and cycling at the equivalent metabolic demand, the amplitude of V̇E during sinusoidal walking (SW) was significantly greater than that during sinusoidal cycling (SC), and the phase shift became smaller. The steeper slope of linear regression for the V̇E amplitude ratio to V̇CO2 amplitude ratio was observed during SW than SC. These findings suggested that the greater amplitude and smaller phase shift of ventilatory dynamics were not equivalent between SW and SC even if the metabolic demand was equivalent between both exercises. Such phenomenon would be derived from central command in proportion to locomotor muscle recruitment (feedforward) and muscle afferent feedback.

| S-EPMC5226792 | biostudies-literature

Numerical Simulation and Experimental Study for the Impact of In-Flow Nozzle on Spray Characteristics.

Project description:The impact of the in-flow characteristics inside the injection nozzle on atomization has been experimentally and computationally studied. Measurements are carried out using a transparent glass nozzle. Pulsed laser sheet with a synchronized charge-coupled device (CCD) camera and image processing, together with a particle image velocimetry (PIV) setup have been used as measuring techniques. Images and relevant image processing are used to visualize and quantify the rate of generation of cavitation bubbles inside the nozzle, the spray particle size distribution, and cone angle. Velocities inside and outside the injection nozzle are measured using PIV. The experimental investigation has been extended to include a wider range of the injection nozzle geometrical aspect ratios and working parameters. The computational model is a three-dimensional, two-phase, turbulent model to solve both the in- and out-nozzle flows. A novel coupling mathematical model is proposed for the definition of the probability density function of the issuing droplet size distribution, based on the in-flow developed conditions. A good agreement between both the experimental and computational results has been found under all conditions. According to both the experimental and computational results, it has been found that the onset of cavitation inside the injection nozzle, its location, collapse, and consequently the issuing spray configurations depend on the flow cavitation number, the nozzle geometrical characteristics, the liquid temperature, and the injection and back pressures. According to the quality of the obtained results from the model, it can be used to extend the study to cover a wider range of spray applications.

| S-EPMC8675010 | biostudies-literature

Experimental study on flow characteristics of gas transport in micro- and nanoscale pores.

Project description:Gas flow behavior in porous media with micro- and nanoscale pores has always been attracted great attention. Gas transport mechanism in such pores is a complex problem, which includes continuous flow, slip flow and transition flow. In this study, the microtubes of quartz microcapillary and nanopores alumina membrane were used, and the gas flow measurements through the microtubes and nanopores with the diameters ranging from 6.42 μm to 12.5 nm were conducted. The experimental results show that the gas flow characteristics are in rough agreement with the Hagen-Poiseuille (H-P) equation in microscale. However, the flux of gas flow through the nanopores is larger than the H-P equation by more than an order of magnitude, and thus the H-P equation considerably underestimates gas flux. The Knudsen diffusion and slip flow coexist in the nanoscale pores and their contributions to the gas flux increase as the diameter decreases. The slip flow increases with the decrease in diameter, and the slip length decreases with the increase in driving pressure. Furthermore, the experimental gas flow resistance is less than the theoretical value in the nanopores and the flow resistance decreases along with the decrease in diameter, which explains the phenomenon of flux increase and the occurrence of a considerable slip length in nanoscale. These results can provide insights into a better understanding of gas flow in micro- and nanoscale pores and enable us to exactly predict and actively control gas slip.

| S-EPMC6629846 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data