High loading of trimethylglycine promotes aqueous solubility of poorly water-soluble cisplatin.
Ontology highlight
ABSTRACT:
SUBMITTER: Kadokawa R
PROVIDER: S-EPMC8105311 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The purpose of the present study was to investigate the interaction of Cinnarizine (CIN) with Hydroxypropyl-?-Cyclodextrin (HP?CD) in the presence of Hydroxy Acids (HA). Various binary and ternary systems of CIN with HP?CD and HA were prepared by kneading and coevaporation methods. For the ternary systems, HA were tried in three different concentrations. The interaction in solution phase was studied in detail by the phase solubility method, and the solid phase interactions were characterized by Fourier Transform Infrared (FTIR) spectroscopy, Differential Scanning Calorimetry (DSC), X-Ray Diffractometry (XRD), Scanning Electron Microscopy (SEM) and Proton Nuclear Magnetic Resonance (1H-NMR). Phase solubility revealed the positive effect of HA on the complexation of CIN with HP?CD. Solid phase characterization confirmed the formation of inclusion complex in the ternary systems. Solubility and dissolution studies illustrated that out of three different concentrations tried, HA were most effective at the 1 M concentration level. Ternary systems were very effective in improving the solubility as well as dissolution profile of CIN than the CIN-HP?CD binary systems. FTIR, 1H-NMR and Molecular docking studies gave some insight at molecular level that actually which part of CIN was interacting with the HP?CD. Molecular docking and free energy calculation even enlighten the role of tartaric acid in increasing solubility of CIN in the ternary system.
| S-EPMC7032147 | biostudies-literature
Project description:In the present paper, chiral mesoporous silica nano-cocoon (A-CMSN) functionalized with amino group was synthesized, and its loading and release of indomethacin (IMC), a poorly soluble drug, was studied. Due to the use of chiral anionic surfactants as a template, A-CMSN possessed 2D hexagonal nano-cocoon morphology with curled channels on its surface, which was quite different from another 2D hexagonal mesoporous silica nanoparticles (MCM-41) with straightway channels. After being loaded into the two silica carriers by hydrogen bond, crystalline IMC converted to amorphous form, leading to the improved drug dissolution. And IMC loading capacity of A-CMSN was higher than MCM-41 because curled loading process originating from curvature chiral channels can hold more drug molecules. Compared with IMC, IMC loaded A-CMSN presented obviously fast release throughout the in vitro release experiment, while IMC loaded MCM-41 released faster than IMC at the initial 5 h then showed controlled slow release afterwards, which was closely related to the mesoporous silica nanoparticles and different channel mesostructures of these two carriers. A-CMSN possessed nano-cocoon morphology with curled 2D hexagonal channel and its channel length was shorter than MCM-41, therefore IMC molecules can easily get rid of the constraint of A-CMSN then to be surrounded by dissolution medium.
| S-EPMC7032221 | biostudies-literature
Project description:To develop a small-scale set-up to rapidly and accurately determine the intrinsic dissolution rate (IDR) and apparent solubility of poorly water-soluble compounds.The IDR and apparent solubility (Sapp) were measured in fasted state simulated intestinal fluid (FaSSIF) for six model compounds using wet-milled controlled suspensions (1.0% (w/w) PVP and 0.2% (w/w) SDS) and the μDISS Profiler. Particle size distribution was measured using a Zetasizer and the total surface area was calculated making use of the density of the compound. Powder and disc dissolution were performed and compared to the IDR of the controlled suspensions.The IDR values obtained from the controlled suspensions were in excellent agreement with IDR from disc measurements. The method used low amount of compound (μg-scale) and the experiments were completed within a few minutes. The IDR values ranged from 0.2-70.6 μg/min/cm2 and the IDR/Sapp ratio ranged from 0.015 to 0.23. This ratio was used to indicate particle size sensitivity on intestinal concentrations reached for poorly water-soluble compounds.The established method is a new, desirable tool that provides the means for rapid and highly accurate measurements of the IDR and apparent solubility in biorelevant dissolution media. The IDR/Sapp is proposed as a measure of particle size sensitivity when significant solubilization may occur.
| S-EPMC5533823 | biostudies-other
Project description:Poor aqueous solubility and dissolution of drug candidates drive key decisions on lead series optimization during drug discovery, on formulation optimization, and clinical studies planning during drug development. The interpretation of the in vivo relevance of early pharmaceutical profiling is often confounded by the multiple factors affecting oral systemic exposure. There is growing evidence that in vitro drug solubility may underestimate the true in vivo solubility and lead to drug misclassification. Based on 10 poorly water-soluble tyrosine kinase inhibitors, this paper demonstrates the use of physiologically-based pharmacokinetic (PK) analysis in combination with early clinical PK data to identify drugs whose absorption is truly limited by solubility in vivo and, therefore, expected to exhibit food effect. Our study supports a totality of evidence approach using early clinical data to guide decisions on conducting drug interaction studies with food and acid-reducing agents.
| S-EPMC7158207 | biostudies-literature
Project description:In spite of significant recent interest in polymeric films containing poorly water-soluble drugs, dissolution mechanism of thicker films has not been investigated. Consequently, release mechanisms of poorly water-soluble drugs from thicker hydroxypropyl methylcellulose (HPMC) films are investigated, including assessing thickness above which they exhibit zero-order drug release. Micronized, surface modified particles of griseofulvin, a model drug of BSC class II, were incorporated into aqueous slurry-cast films of different thicknesses (100, 500, 1000, 1500 and 2000 μm). Films 1000 μm and thicker were formed by either stacking two or more layers of ~500 μm, or forming a monolithic thick film. Compared to monolithic thick films, stacked films required simpler manufacturing process (easier casting, short drying time) and resulted in better critical quality attributes (appearance, uniformity of thickness and drug per unit area). Both the film forming approaches exhibited similar release profiles and followed the semi-empirical power law. As thickness increased from 100 μm to 2000 μm, the release mechanism changed from Fickian diffusion to zero-order release for films ≥1000 μm. The diffusional power law exponent, n, achieved value of 1, confirming zero-order release, whereas the percentage drug release varied linearly with sample surface area, and sample thickness due to fixed sample diameter. Thus, multi-layer hydrophilic polymer aqueous slurry-cast thick films containing poorly water-soluble drug particles provide a convenient dosage form capable of zero-order drug release with release time modulated through number of layers.
| S-EPMC5899018 | biostudies-literature
Project description:Poor aqueous solubility is a major hindrance to oral delivery of many emerging drugs. Supersaturated drug solutions can improve passive absorption across the gastrointestinal tract membrane as long as crystallization can be inhibited, enhancing the delivery of such poorly soluble therapeutics. Polymers can inhibit crystallization and prolong supersaturation; therefore, it is desirable to understand the attributes which render a polymer effective. In this study, the conformation of a polymer adsorbed to a crystal surface and its impact on crystal growth inhibition were investigated. The crystal growth rate of a poorly soluble pharmaceutical compound, felodipine, was measured in the presence of hydroxypropyl methylcellulose acetate succinate (HPMCAS) at two different pH conditions: pH 3 and pH 6.8. HPMCAS was found to be a less effective growth rate inhibitor at pH 3, below its pKa. It was expected that the ionization state of HPMCAS would most likely influence its conformation at the solid-liquid interface. Further investigation with atomic force microscopy (AFM) revealed significant differences in the conformation of HPMCAS adsorbed to felodipine at the two pH conditions. At pH 3, HPMCAS formed coiled globules on the surface, whereas at pH 6.8, HPMCAS adsorbed more uniformly. Thus, it appeared that the reduced effectiveness of HPMCAS at pH 3 was directly related to its conformation. The globule formation leaves many felodipine growth sites open and available for growth units to attach, rendering the polymer less effective as a growth rate inhibitor.
| S-EPMC4295812 | biostudies-literature
Project description:In the present study, the screening of Mirabegron (MBR) co-amorphous was performed to produce water-soluble and thermodynamically stable MBR co-amorphous with the purpose of overcoming the water solubility problem of MBR. MBR is Biopharmaceutics Classification System (BCS) class II drug used for the treatment of an overreactive bladder. The co-amorphous screening was carried out by means of the vacuum evaporation crystallization technique in methanol solvent using three water-soluble carboxylic acids, characterized by a pKa difference greater than 3 with MBR such as fumaric acid (FA), l-pyroglutamic acid (PG), and citric acid (CA). Powder X-ray diffraction (PXRD) results suggested that all solid materials produced at MBR-FA (1 equivalent (eq.)/1 equivalent (eq.)), MBR-PG (1 eq./1 eq.), and MBR-CA (1 eq./1 eq.) conditions were amorphous state solid materials. Furthermore, by means of solution-state nuclear magnetic resonance (NMR) (¹H, 13C, and 2D) and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, we could assess that MBR and carboxylic acid molecules were linked via ionic interactions to produce MBR co-amorphous. Besides, solid-state cross polarization (CP)/magic angle spinning (MAS) 13C-NMR analysis was conducted for additional assessment of MBR co-amorphous. Afterwards, dissolution tests of MBR co-amorphouses, MBR crystalline solid, and MBR amorphous were carried out for 12 h to evaluate and to compare their solubilities, dissolution rates, and phase transformation phenomenon. Here, the results suggested that MBR co-amorphouses displayed more than 57-fold higher aqueous solubility compared to MBR crystalline solid, and PXRD monitoring result suggested that MBR co-amorphouses were able to maintain their amorphous state for more than 12 h. The same results revealed that MBR amorphous exhibited increased solubility of approximatively 6.7-fold higher compared to MBR crystalline solid. However, the PXRD monitoring result suggested that MBR amorphous undergo rapid phase transformation to crystalline form in just 35 min and that within an hour all MBR amorphous are completely converted to crystalline solid. Accordingly, the increase in MBR co-amorphous' solubility was attributed to the presence of ionic interactions in MBR co-amorphous molecules. Moreover, from the differential scanning calorimetry (DSC) monitoring results, we predicted that the high glass transition temperature (Tg) of MBR co-amorphous compared to MBR amorphous was the main factor influencing the phase stability of MBR co-amorphous.
| S-EPMC6161252 | biostudies-literature
Project description:Polymer strip films have emerged as a robust platform for poorly water-soluble drug delivery. However, the common conception is that films cannot exceed low drug loadings, mainly due to poor drug stability, slow release, and film brittleness. This study explores the ability to achieve high loadings of poorly water-soluble drug nanoparticles in strip films while retaining good mechanical properties and enhanced dissolution rate. Aqueous suspensions containing up to 30wt% griseofulvin nanoparticles were prepared via wet stirred media milling and incorporated into hydroxypropyl methylcellulose (HPMC) films. Griseofulvin loading in films was adjusted to be between 9 and 49wt% in HPMC-E15 films and 30 and 73wt% in HPMC-E4M films by varying the mixing ratio of HPMC solution-to-griseofulvin suspension. All films exhibited good content uniformity and nanoparticle redispersibility up to 50wt% griseofulvin, while E4M films above 50wt% griseofulvin had slightly worse content uniformity and poor nanoparticle redispersibility. Increasing drug loading in films generally required more time to achieve 100% release during dissolution, although polymer-drug clusters dispersed from E4M films above 50wt% griseofulvin, resulting in similar dissolution profiles. While all films exhibited good tensile strength, a significant decrease in percent elongation was observed above 40-50wt% GF, resulting in brittle films.
| S-EPMC5488802 | biostudies-literature
Project description:Poly(ethylene glycol)-block-poly(D,L-lactic acid) (PEG-b-PLA) micelles have a proven capacity for drug solubilization and have entered phase III clinical trials as a substitute for Cremophor EL in the delivery of paclitaxel in cancer therapy. PEG-b-PLA is less toxic than Cremophor EL, enabling a doubling of paclitaxel dose in clinical trials. We show that PEG-b-PLA micelles act as a 3-in-1 nanocontainer for paclitaxel, 17-allylamino-17-demethoxygeldanamycin (17-AAG), and rapamycin for multiple drug solubilization. 3-in-1 PEG-b-PLA micelles were ca. 40 nm in diameter; dissolved paclitaxel, 17-AAG, and rapamycin in water at 9.0 mg/mL; and were stable for 24 h at 25 °C. The half-life for in vitro drug release (t(1/2)) for 3-in-1 PEG-b-PLA micelles was 1-15 h under sink conditions and increased in the order of 17-AAG, paclitaxel, and rapamycin. The t(1/2) values correlated with log P(o/w) values, implicating a diffusion-controlled mechanism for drug release. The IC(50) value of 3-in-1 PEG-b-PLA micelles for MCF-7 and 4T1 breast cancer cell lines was 114 ± 10 and 25 ± 1 nM, respectively; combination index (CI) analysis showed that 3-in-1 PEG-b-PLA micelles exert strong synergy in MCF-7 and 4T1 breast cancer cell lines. Notably, concurrent intravenous (iv) injection of paclitaxel, 17-AAG, and rapamycin using 3-in-1 PEG-b-PLA micelles was well-tolerated by FVB albino mice. Collectively, these results suggest that PEG-b-PLA micelles carrying paclitaxel, 17-AAG, and rapamycin will provide a simple yet safe and efficacious 3-in-1 nanomedicine for cancer therapy.
| S-EPMC4896148 | biostudies-literature
Project description:Cellulose beads emerge as carriers for poorly water-soluble drugs due to their eco-friendly raw materials and favorable porous structure. However, drug dissolution may be limited by their poor swelling ability and the presence of closed pores caused by shrinkage of the pristine cellulose beads. In this study, novel cellulose beads that can swell in acidic environment were prepared by introducing ethylenediamine (EDA) on dialdehyde cellulose (DAC), thereby addressing the shrinkage and closed pore problem of cellulose beads. The effect of the ratio of EDA on the swelling behavior and amine content of beads was studied. Three model drugs with different physicochemical properties were selected to study the physical state of loaded drugs and their release behavior. According to the results of XRPD and DSC, indomethacin and itraconazole loaded in the beads were amorphous at a drug loading of 20%, but fenofibrate was partially crystalline. Both bead size and the ratio of amine groups influenced the release behavior of the model drugs. The in vitro dissolution results showed that the cationic beads greatly improved the solubility and dissolution rate of the drug compared with the crystalline drug. Beads with a small size and high ratio of EDA tend to achieve a better drug dissolution rate and cumulative release percentage. Physical stability studies of the itraconazole-loaded beads were also implemented under four different temperature/humidity conditions for up to two months. The results showed that crystallization only appeared after two months of storage at 40°/75% RH, and the drug maintained a non-crystalline state in the other three storage conditions (0 °C/0 %RH, 0 °C/32 %RH, 25 °C/32 %RH). In conclusion, the novel pH-responsive cationic cellulose beads show great potential as a carrier for improving the rate and extent of dissolution of poorly soluble drugs and maintaining supersaturation.
| S-EPMC9804101 | biostudies-literature