Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Confinement effects and acid strength in zeolites.

ABSTRACT: Chemical reactivity and sorption in zeolites are coupled to confinement and-to a lesser extent-to the acid strength of Brønsted acid sites (BAS). In presence of water the zeolite Brønsted acid sites eventually convert into hydronium ions. The gradual transition from zeolite Brønsted acid sites to hydronium ions in zeolites of varying pore size is examined by ab initio molecular dynamics combined with enhanced sampling based on Well-Tempered Metadynamics and a recently developed set of collective variables. While at low water content (1-2 water/BAS) the acidic protons prefer to be shared between zeolites and water, higher water contents (n > 2) invariably lead to solvation of the protons within a localized water cluster adjacent to the BAS. At low water loadings the standard free energy of the formed complexes is dominated by enthalpy and is associated with the acid strength of the BAS and the space around the site. Conversely, the entropy increases linearly with the concentration of waters in the pores, favors proton solvation and is independent of the pore size/shape.

SUBMITTER: Grifoni E

PROVIDER: S-EPMC8113345 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Confinement effects facilitate low-concentration carbon dioxide capture with zeolites.

Project description:Engineered systems designed to remove CO2 from the atmosphere need better adsorbents. Here, we report on zeolite-based adsorbents for the capture of low-concentration CO2. Synthetic zeolites with the mordenite (MOR)-type framework topology physisorb CO2 from low concentrations with fast kinetics, low heat of adsorption, and high capacity. The MOR-type zeolites can have a CO2 capacity of up to 1.15 and 1.05 mmol/g for adsorption from 400 ppm CO2 at 30 °C, measured by volumetric and gravimetric methods, respectively. A structure-performance study demonstrates that Na+ cations in the O33 site located in the side-pocket of the MOR-type framework, that is accessed through a ring of eight tetrahedral atoms (either Si4+ or Al3+: eight-membered ring [8MR]), is the primary site for the CO2 uptake at low concentrations. The presence of N2 and O2 shows negligible impact on CO2 adsorption in MOR-type zeolites, and the capacity increases to ∼2.0 mmol/g at subambient temperatures. By using a series of zeolites with variable topologies, we found the size of the confining pore space to be important for the adsorption of trace CO2. The results obtained here show that the MOR-type zeolites have a number of desirable features for the capture of CO2 at low concentrations.

| S-EPMC9522334 | biostudies-literature

Influence of Intracrystalline Ionic Strength in MFI Zeolites on Aqueous Phase Dehydration of Methylcyclohexanols.

Project description:The impact of the concentration of hydrated hydronium ions and in turn of the local ionic strength in MFI zeolites has been investigated for the aqueous phase dehydration of 4-methylcyclohexanol (E1 mechanism) and cis-2-methylcyclohexanol (E2 mechanism). The E2 pathway with the latter alcohol led to a 2.5-fold higher activity. The catalytic activity normalized to the hydronium ions (turnover frequency, TOF) passed through a pronounced maximum, which is attributed to the increasing excess chemical potential of the alcohols in the pores, increasing in parallel with the ionic strength and the additional work caused by repulsive interactions and charge separation induced by the bulky alcohols. While the maximum in rate observed is invariant with the mechanism or substitution, the reaction pathway is influencing the activation parameters differently.

| S-EPMC9290721 | biostudies-literature

Disentanglement of Surface and Confinement Effects for Diene Metathesis in Mesoporous Confinement.

Project description:We study the effects of a planar interface and confinement on a generic catalytically activated ring-closing polymerization reaction near an unstructured catalyst. For this, we employ a coarse-grained polymer model using grand-canonical molecular dynamics simulations with a Monte Carlo reaction scheme. Inspired by recent experiments in the group of M. Buchmeiser that demonstrated an increase in ring-closing selectivity under confinement, we show that both the interface effects, i.e., placing the catalyst near a planar wall, and the confinement effects, i.e., locating the catalyst within a pore, lead to an increase of selectivity. We furthermore demonstrate that curvature effects for cylindrical mesopores (2 nm < d < 12.3 nm) influence the distribution of the chain ends, leading to a further increase in selectivity. This leads us to speculate that specially corrugated surfaces might also help to enhance catalytically activated polymerization processes.

| S-EPMC10785312 | biostudies-literature

Metalloenzyme-like catalyzed isomerizations of sugars by Lewis acid zeolites.

Project description:Isomerization of sugars is used in a variety of industrially relevant processes and in glycolysis. Here, we show that hydrophobic zeolite beta with framework tin or titanium Lewis acid centers isomerizes sugars, e.g., glucose, via reaction pathways that are analogous to those of metalloenzymes. Specifically, experimental and theoretical investigations reveal that glucose partitions into the zeolite in the pyranose form, ring opens to the acyclic form in the presence of the Lewis acid center, isomerizes into the acyclic form of fructose, and finally ring closes to yield the furanose product. The zeolite catalysts provide processing advantages over metalloenzymes such as an ability to work at higher temperatures and in acidic conditions that allow for the isomerization reaction to be coupled with other important conversions.

| S-EPMC3382492 | biostudies-literature

Strength of Humic Acid Aggregates: Effects of Divalent Cations and Solution pH.

Project description:Aggregation-dispersion, charging, and aggregate strength of Leonardite humic acid (LHA) were investigated in CaCl2 and MgCl2 solutions as a function of pH and ionic strength (I). The strength or the withstanding force of aggregates of humic substances (HSs) against breakage is important because this force influences the transport and distribution of pollutants and nutrients along with HSs through the change in the size of HS aggregates as a transport unit. We observed the dominancy of aggregation of LHA at high pH than at low pH in every case of CaCl2 and MgCl2 solutions. This observation suggests the higher binding efficiency of these divalent ions at high pH, though there was no obvious relation with electrophoretic mobility and aggregation of LHA. Further, we first revealed the numerical value of the strength of HS aggregates by using a simple experimental setup of aggregate breakup under laminar converging flow through a capillary tube. The obtained values of the strength of LHA aggregates were higher in the presence of CaCl2 solution than MgCl2 solution, and the strength increased with pH. The highest strengths of LHA aggregates in 30 mM (I) CaCl2 and MgCl2 solutions were around 5.8 and 2.4 nN, respectively, at pH around 9.

| S-EPMC6648436 | biostudies-literature

High Strength Concrete Columns under Axial Compression Load: Hybrid Confinement Efficiency of High Strength Transverse Reinforcement and Steel Fibers.

Project description:Addition of steel fibers to high strength concrete (HSC) improves its post-peak behavior and energy absorbing capability, which can be described well in term of toughness. This paper attempts to obtain both analytically and experimentally the efficiency of steel fibers in HSC columns with hybrid confinement of transverse reinforcement and steel fibers. Toughness ratio (TR) to quantify the confinement efficiency of HSC columns with hybrid confinement is proposed through a regression analysis by involving sixty-nine TRs of HSC without steel fibers and twenty-seven TRs of HSC with hybrid of transverse reinforcement and steel fibers. The proposed TR equation was further verified by compression tests of seventeen HSC columns conducted in this study, where twelve specimens were reinforced by high strength rebars in longitudinal and transverse directions. The results show that the efficiency of steel fibers in concrete depends on transverse reinforcement spacing, where the steel fibers are more effective if the spacing transverse reinforcement becomes larger in the range of 0.25-1 effective depth of the section column. Furthermore, the axial load-strain curves were developed by employing finite element software (OpenSees) for simulating the response of the structural system. Comparisons between numerical and experimental axial load-strain curves were carried out.

| S-EPMC5502928 | biostudies-other

Cage effects control the mechanism of methane hydroxylation in zeolites.

Project description:Catalytic conversion of methane to methanol remains an economically tantalizing but fundamentally challenging goal. Current technologies based on zeolites deactivate too rapidly for practical application. We found that similar active sites hosted in different zeolite lattices can exhibit markedly different reactivity with methane, depending on the size of the zeolite pore apertures. Whereas zeolite with large pore apertures deactivates completely after a single turnover, 40% of active sites in zeolite with small pore apertures are regenerated, enabling a catalytic cycle. Detailed spectroscopic characterization of reaction intermediates and density functional theory calculations show that hindered diffusion through small pore apertures disfavors premature release of CH3 radicals from the active site after C-H activation, thereby promoting radical recombination to form methanol rather than deactivated Fe-OCH3 centers elsewhere in the lattice.

| S-EPMC10353845 | biostudies-literature

Confinement Effects on the Benzene Orientational Structure.

Project description:Liquids under confinement exhibit different properties compared with their corresponding bulk phases, for example, miscibility, phase transitions, and diffusion. The underlying cause is the local ordering of molecules, which is usually only studied using pure simulation methods. Herein, we derive experimentally the structure of benzene confined in MCM-41 using total neutron scattering measurements. The study reveals a layering of molecules across a pore, and four concentric cylindrical shells can be distinguished for a pore with the radius of 18?Å. The nanoscale confinement of the liquid has a major effect on the spatial and orientational correlations observed between the molecules, when compared with the structure of the bulk liquid. These differences are most marked for molecules in parallel configurations, and this suggests differences in chemical reactivity between the confined and bulk liquids.

| S-EPMC6099463 | biostudies-literature

A Deep Insight into Perfluorooctanoic Acid Photodegradation Using Metal Ion-Exchanged Zeolites.

Project description:Treating perfluorooctanoic acid (PFOA) in an aqueous environment is problematic due to its low concentration and its high resistance to biological and chemical degradation. To tackle this challenge, combinations of pre-enrichment and photodegradation processes are promising solutions. In this work, we investigated metal ion-exchanged zeolites as adsorbents and photocatalysts for PFOA treatment. Among various transition metal ion-exchanged BEA zeolites, Fe-exchanged BEA (Fe-BEA) zeolites showed significant activity for the photodegradation of PFOA. The isolated iron species in Fe-BEA zeolite are responsible for PFOA photodegradation, whereas other iron species present from excess iron loading in the zeolite will lower its photocatalytic activity. Furthermore, it was proved via size exclusion tests using branched PFOA isomers that the photodegradation of PFOA took place on the internal surface rather than the external surface of Fe-BEA zeolite. Photodegradation of PFOA was also tested to be effective with Fe-exchanged BEA-type zeolites having various SiO2/Al2O3 ratios, but ineffective with FAU-type zeolites. The optimal Fe-BEA zeolite showed a sorption coefficient Kd of 6.0 × 105 L kg-1 at an aqueous phase PFOA concentration of 0.7 μg L-1 and a PFOA half-life of 1.8 h under UV-A irradiation. The presented study offers a deeper understanding of the use of metal ion-exchanged zeolites for photodegradation of PFOA.

| S-EPMC10928708 | biostudies-literature

Direct carbon-carbon coupling of furanics with acetic acid over Bronsted zeolites.

Project description:Effective carbon-carbon coupling of acetic acid to form larger products while minimizing CO2 emissions is critical to achieving a step change in efficiency for the production of transportation fuels from sustainable biomass. We report the direct acylation of methylfuran with acetic acid in the presence of water, all of which can be readily produced from biomass. This direct coupling limits unwanted polymerization of furanics while producing acetyl methylfuran. Reaction kinetics and density functional theory calculations illustrate that the calculated apparent barrier for the dehydration of the acid to form surface acyl species is similar to the experimentally measured barrier, implying that this step plays a significant role in determining the net reaction rate. Water inhibits the overall rate, but selectivity to acylated products is not affected. We show that furanic species effectively stabilize the charge of the transition state, therefore lowering the overall activation barrier. These results demonstrate a promising new route to C-C bond-forming reactions for the production of higher-value products from biomass.

| S-EPMC5026421 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data