Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Thermoelectric Generator Using Polyaniline-Coated Sb₂Se₃/β-Cu₂Se Flexible Thermoelectric Films.

ABSTRACT: Herein, Sb₂Se₃ and β-Cu₂Se nanowires are synthesized via hydrothermal reaction and water evaporation-induced self-assembly methods, respectively. The successful syntheses and morphologies of the Sb₂Se₃ and β-Cu₂Se nanowires are confirmed via X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, field emission scanning electron microscopy (FE-SEM), and field emission transmission electron microscopy (FE-TEM). Sb₂Se₃ materials have low electrical conductivity which limits application to the thermoelectric generator. To improve the electrical conductivity of the Sb₂Se₃ and β-Cu₂Se nanowires, polyaniline (PANI) is coated onto the surface and confirmed via Fourier-transform infrared spectroscopy (FT-IR), FE-TEM, and XPS analysis. After coating PANI, the electrical conductivities of Sb₂Se₃/β-Cu₂Se/PANI composites were increased. The thermoelectric performance of the flexible Sb₂Se₃/β-Cu₂Se/PANI films is then measured, and the 70%-Sb₂Se₃/30%-β-Cu₂Se/PANI film is shown to provide the highest power factor of 181.61 μW/m·K² at 473 K. In addition, a thermoelectric generator consisting of five legs of the 70%-Sb₂Se₃/30%-β-Cu₂Se/PANI film is constructed and shown to provide an open-circuit voltage of 7.9 mV and an output power of 80.1 nW at ΔT = 30 K. This study demonstrates that the combination of inorganic thermoelectric materials and flexible polymers can generate power in wearable or portable devices.

SUBMITTER: Kim M

PROVIDER: S-EPMC8125897 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Multi-Point Flexible Temperature Sensor Array and Thermoelectric Generator Made from Copper-Coated Textiles.

Project description:The integration of electrical functionality into flexible textile structures requires the development of new concepts for flexible conductive material. Conductive and flexible thin films can be generated on non-conductive textile materials by electroless metal deposition. By electroless copper deposition on lyocell-type cellulose fabrics, thin conductive layers with a thickness of approximately 260 nm were prepared. The total copper content of a textile fabric was analyzed to be 147 mg per g of fabric, so that the textile character of the material remains unchanged, which includes, for example, the flexibility and bendability. The flexible material could be used to manufacture a thermoelectric sensor array and generator. This approach enables the formation of a sensor textile with a large number of individual sensors and, at the same time, a reduction in the number of electrical connections, since the conductive textile serves as a common conductive line for all sensors. In combination with aluminum, thermoelectric coefficients of 3-4 µV/K were obtained, which are comparable with copper/aluminum foil and bulk material. Thermoelectric generators, consisting of six junctions using the same material combinations, led to electric output voltages of 0.4 mV for both setups at a temperature difference of 71 K. The results demonstrate the potential of electroless deposition for the production of thin-film-coated flexible textiles, and represent a key technology to achieve the direct integration of electrical sensors and conductors in non-conductive material.

| S-EPMC8198943 | biostudies-literature

All-Printed Flexible Hygro-Thermoelectric Paper Generator.

Project description:The conversion of ubiquitous hygrothermal resources into renewable energy offers significant potential for cable-free, self-powered systems that can operate worldwide without regard to climatic or geographic limitations. Here, an all-printed flexible hygro-thermoelectric paper generator is demonstrated that uses bifunctional mobile ions and electrons to make the moist-diffusion effect, the Soret effect, and the Seebeck effect work synergistically. In the ordinary hygrothermal settings, it generates an unconventional hygro-thermoelectric output pattern and shows almost a dozen-fold increase in positive hygro-thermopower of 26.70 mV K-1 and also another negative hygro-thermopower of -15.71 mV K-1 compared to pure thermopower. A single paper generator can produce a giant 680 mV displaying typical cyclic sinusoidal waveform characters with volt-sized amplitudes. The ion-electron conductive ink is easily printable and consists primarily of a Bi2 Te3 /PEDOT:PSS thermoelectric matrix modulated with a hygroscopic glycerol that releases ion charges for moist-diffusion effect and Soret effect, as well as electron charges for Seebeck effect. The emerged hygro-thermoelectric harvesting strategy from surrounding hygrothermal resources offers a revolutionary approach to the next generation of hybrid energy with cost-efficiency, flexibility, and sustainability, and also enables large-scale roll-to-roll production.

| S-EPMC10037691 | biostudies-literature

Preparation and Characterization of Screen-Printed Cu<sub>2</sub>S/PEDOT:PSS Hybrid Films for Flexible Thermoelectric Power Generator.

Project description:In recent years, flexible thermoelectric generators(f-TEG), which can generate electricity by environmental temperature difference and have low cost, have been widely concerned in self-powered energy devices for underground pipe network monitoring. This paper studied the Cu2S films by screen-printing. The effects of different proportions of p-type Cu2S/poly 3,4-ethylene dioxythiophene-polystyrene sulfonate (PEDOT:PSS) mixture on the thermoelectric properties of films were studied. The interfacial effect of the two materials, forming a superconducting layer on the surface of Cu2S, leads to the enhancement of film conductivity with the increase of PEDOT:PSS. In addition, the Seebeck coefficient decreases with the increase of PEDOT:PSS due to the excessive bandgap difference between the two materials. When the content ratio of Cu2S and PEDOT:PSS was 1:1.2, the prepared film had the optimal thermoelectric performance, with a maximum power factor (PF) of 20.60 μW·m-1·K-1. The conductivity reached 75% of the initial value after 1500 bending tests. In addition, a fully printed Te-free f-TEG with a fan-shaped structure by Cu2S and Ag2Se was constructed. When the temperature difference (ΔT) was 35 K, the output voltage of the f-TEG was 33.50 mV, and the maximum power was 163.20 nW. Thus, it is envisaged that large thermoelectric output can be obtained by building a multi-layer stacking f-TEG for continuous self-powered monitoring.

| S-EPMC9324872 | biostudies-literature

Flexible thermoelectric generator and energy management electronics powered by body heat.

Project description:Uninterrupted, efficient power supplies have posed a significant hurdle to the ubiquitous adoption of wearable devices, despite their potential for revolutionizing human‒machine interactions. This challenge is further compounded by the requirement of these devices to supply dependable energy for data-intensive sensing and transmission. Traditional thermoelectric solutions fail to deliver satisfactory performance under conditions of extremely low voltages. Here, we present a novel solution of a wearable thermoelectric generator integrated with an energy management system, which is capable of powering sensors and Bluetooth by harnessing body heat. Distinct from previous works, our innovation lies in its ability to consistently operate even with a minimal temperature difference (i.e., 4 K) between the human skin and the ambient environment, ensuring reliable data transmission within a time as short as 1.6 s. Furthermore, our system can recharge utilizing body heat under ultralow voltage conditions (30 mV). Our developed system provides a novel pathway for the continuous, reliable monitoring of self-contained wearable devices without depending on batteries.

| S-EPMC10449853 | biostudies-literature

Thermoelectric Flexible Silver Selenide Films: Compositional and Length Optimization.

Project description:Silver selenide is considered as a promising room temperature thermoelectric material due to its excellent performance and high abundance. However, the silver selenide-based flexible film is still behind in thermoelectric performance compared with its bulk counterpart. In this work, the composition of paper-supported silver selenide film was successfully modulated through changing reactant ratio and annealing treatment. In consequence, the power factor value of 2450.9 ± 364.4 ?W/(mK2) at 303 K, which is close to that of state-of-the-art bulk Ag2Se has been achieved. Moreover, a thermoelectric device was fabricated after optimizing the length of annealed silver selenide film via numerical simulation. At temperature difference of 25 K, the maximum power density of this device reaches 5.80 W/m2, which is superior to that of previous film thermoelectric devices. Theoretically and experimentally, this work provides an effective way to achieve silver-selenide-based flexible thermoelectric film and device with high performance.

| S-EPMC6941873 | biostudies-literature

A Strategy for Fabricating Ultra-Flexible Thermoelectric Films Using Ag<sub>2</sub>Se-Based Ink.

Project description:Flexible thermoelectric materials have drawn significant attention from researchers due to their potential applications in wearable electronics and the Internet of Things. Despite many reports on these materials, it remains a significant challenge to develop cost-effective methods for large-scale, patterned fabrication of materials that exhibit both excellent thermoelectric performance and remarkable flexibility. In this study, we have developed an Ag2Se-based ink with excellent printability that can be used to fabricate flexible thermoelectric films by screen printing and low-temperature sintering. The printed films exhibit a Seebeck coefficient of -161 μV/K and a power factor of 3250.9 μW/m·K2 at 400 K. Moreover, the films demonstrate remarkable flexibility, showing minimal changes in resistance after being bent 5000 times at a radius of 5 mm. Overall, this research offers a new opportunity for the large-scale patterned production of flexible thermoelectric films.

| S-EPMC11312965 | biostudies-literature

Optimization of segmented thermoelectric generator using Taguchi and ANOVA techniques.

Project description:Recent studies have demonstrated that segmented thermoelectric generators (TEGs) can operate over large thermal gradient and thus provide better performance (reported efficiency up to 11%) as compared to traditional TEGs, comprising of single thermoelectric (TE) material. However, segmented TEGs are still in early stages of development due to the inherent complexity in their design optimization and manufacturability. In this study, we demonstrate physics based numerical techniques along with Analysis of variance (ANOVA) and Taguchi optimization method for optimizing the performance of segmented TEGs. We have considered comprehensive set of design parameters, such as geometrical dimensions of p-n legs, height of segmentation, hot-side temperature, and load resistance, in order to optimize output power and efficiency of segmented TEGs. Using the state-of-the-art TE material properties and appropriate statistical tools, we provide near-optimum TEG configuration with only 25 experiments as compared to 3125 experiments needed by the conventional optimization methods. The effect of environmental factors on the optimization of segmented TEGs is also studied. Taguchi results are validated against the results obtained using traditional full factorial optimization technique and a TEG configuration for simultaneous optimization of power and efficiency is obtained.

| S-EPMC5711871 | biostudies-literature

Thermoelectric Properties of Flexible PEDOT:PSS/Polypyrrole/Paper Nanocomposite Films.

Project description:Flexible poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/polypyrrole/paper (PEDOT:PSS/PPy/paper) thermoelectric (TE) nanocomposite films were prepared by a two-step method: first, PPy/paper nanocomposite films were prepared by an in situ chemical polymerization process, and second, PEDOT:PSS/PPy/paper TE composite films were fabricated by coating the as-prepared PPy/paper nanocomposite films using a dimethyl sulfoxide-doped PEDOT:PSS solution. Both the electrical conductivity and the Seebeck coefficient of the PEDOT:PSS/PPy/paper TE nanocomposite films were greatly enhanced from 0.06 S/cm to ~0.365 S/cm, and from 5.44 μV/K to ~16.0 μV/K at ~300 K, respectively, when compared to the PPy/paper TE nanocomposite films. The thermal conductivity of the PEDOT:PSS/PPy/paper composite film (0.1522 Wm-1K-1 at ~300 K) was, however, only slightly higher than that of the PPy/paper composite film (0.1142 Wm-1K-1 at ~300 K). As a result, the ZT value of the PEDOT:PSS/PPy/paper composite film (~1.85 × 10-5 at ~300 K) was significantly enhanced when compared to that of the PPy/paper composite film (~4.73 × 10-7 at ~300 K). The as-prepared nanocomposite films have great potential for application in flexible TE devices.

| S-EPMC5551823 | biostudies-other

Conductive PEDOT: PSS-Based Organic/Inorganic Flexible Thermoelectric Films and Power Generators.

Project description:We present a simple thermoelectric device that consists of a conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-based inorganic/organic thermoelectric film with high thermoelectric performance. The PEDOT:PSS-coated Se NWs were first chemically synthesized in situ, and then mixed with an Ag precursor solution to produce the PEDOT:PSS-coated Ag2Se NWs. The PEDOT:PSS matrix was then treated with dimethyl sulfoxide (DMSO) prior to the production of flexible PEDOT:PSS-coated Ag2Se NW/PEDOT:PSS composite films with various weight fractions of Ag2Se via a simple drop-casting method. The thermoelectric properties (Seebeck coefficient, electrical conductivity, and power factor) of the composite films were then analyzed. The composite film with 50 wt.% NWs exhibited the highest power factor of 327.15 μW/m·K2 at room temperature. The excellent flexibility of this composite film was verified by bending tests, in which the thermoelectric properties were reduced by only ~5.9% after 1000 bending cycles. Finally, a simple thermoelectric device consisting of five strips of the proposed composite film was constructed and was shown to generate a voltage of 7.6 mV when the temperature difference was 20 K. Thus, the present study demonstrates that that the combination of a chalcogenide and a conductive composite film can produce a high-performance flexible thermoelectric composite film.

| S-EPMC7826913 | biostudies-literature

Screen-Printed Flexible Thermoelectric Device Based on Hybrid Silver Selenide/PVP Composite Films.

Project description:In recent years, the preparation of flexible thermoelectric generators by screen printing has attracted wide attention due to easy processing and high-volume production. In this work, we propose an n-type Ag2Se/polymer polyvinylpyrrolidone (PVP) film based on screen printing and investigate the effect of PVP on thermoelectric performance by varying the ratio of PVP. When the content ratio of Ag2Se to PVP is 30:1, i.e., PI30, the fabricated PI30 film has the best thermoelectric property. The maximum power factor (PF) of the PI30 is 4.3 μW·m-1·K-2, and conductivity reaches 81% of its initial value at 1500 bending cycles. Then, the film thermoelectric generator (F-TEG) fabricated by PI30 is tested for practical application; the output voltage and the maximum output power are 21.6 mV and 233.3 nW at the temperature difference of 40 K, respectively. This work demonstrates that the use of PVP combined with screen printing to prepare F-TEG is a simple and rapid method, which provides an efficient preparation solution for the development of environmentally friendly and wearable flexible thermoelectric devices.

| S-EPMC8401139 | biostudies-literature