Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Inflammatory responses to metal oxide ceramic nanopowders.

ABSTRACT: Ceramic orthopaedic implants are increasingly popular due to the need for robust total joint replacement implants that have a high success rate long-term and do not induce biological responses in patients. This study was designed to investigate the biological effects of ceramic nanopowders containing aluminium oxide or zirconium oxide to activate the human macrophage THP-1 cell line. In vitro investigation of pro-inflammatory gene expression and chemokine secretion was performed studied using RT-qPCR and ELISA, respectively. TLR4 inhibition, using a small-molecule inhibitor, was used to determine whether ceramic-mediated inflammation occurs in a similar manner to that of metals such as cobalt. THP-1 macrophages were primed with ceramics or LPS and then treated with ATP or ceramics, respectively, to determine whether these nanopowders are involved in the priming or activation of the NLRP3 inflammasome through IL-1β secretion. Cells treated with ceramics significantly increased pro-inflammatory gene expression and protein secretion which was attenuated through TLR4 blockade. Addition of ATP to cells following ceramic treatment significantly increased IL-1β secretion. Therefore, we identify the ability of ceramic metal oxides to cause a pro-inflammatory phenotype in THP-1 macrophages and propose the mechanism by which this occurs is primarily via the TLR4 pathway which contributes to inflammasome signalling.

SUBMITTER: Jamieson S

PROVIDER: S-EPMC8131359 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Preparation, performance and mechanism of metal oxide modified catalytic ceramic membranes for wastewater treatment.

Project description:Catalytic ceramic membranes (CMs) integrated with different metal oxides were designed and fabricated by an impregnation-sintering method. The characterization results indicated that the metal oxides (Co3O4, MnO2, Fe2O3 and CuO) were uniformly anchored around the Al2O3 particles of the membrane basal materials, which could provide a large number of active sites throughout the membrane for the activation of peroxymonosulfate (PMS). The performance of the CMs/PMS system was evaluated by filtrating a phenol solution under different operating conditions. All the four catalytic CMs showed desirable phenol removal efficiency and the performance was in order of CoCM, MnCM, FeCM and CuCM. Moreover, the low metal ion leaching and high catalytic activity even after the 6th run revealed the good stability and reusability of the catalytic CMs. Quenching experiments and electron paramagnetic resonance (EPR) measurements were conducted to discuss the mechanism of PMS activation in the CMs/PMS system. The reactive oxygen species (ROS) were supposed to be SO4˙- and 1O2 in the CoCM/PMS system, 1O2 and O2˙- in the MnCM/PMS system, SO4˙- and ·OH in the FeCM/PMS system, and SO4˙- in the CuCM/PMS system, respectively. The comparative study on the performance and mechanism of the four CMs provides a better understanding of the integrated PMS-CMs behaviors.

| S-EPMC10258605 | biostudies-literature

Inflammatory pseudotumor after ceramic-on-ceramic total hip arthroplasty.

Project description:We present a unique case of a symptomatic adverse local tissue reaction in a patient with a ceramic-on-ceramic total hip bearing surface. To our knowledge, this pathological finding has not yet been described in a ceramic-on-ceramic articulation without a cobalt-chromium alloy trunnion or modular neck component as a source of metal wear. We conclude that despite its mechanical mostly benign wear characteristics, ceramic wear debris is not entirely inert and may lead to the development of adverse local tissue reaction.

| S-EPMC5485220 | biostudies-literature

Nanoarchitected metal/ceramic interpenetrating phase composites.

Project description:Architected metals and ceramics with nanoscale cellular designs, e.g., nanolattices, are currently subject of extensive investigation. By harnessing extreme material size effects, nanolattices demonstrated classically inaccessible properties at low density, with exceptional potential for superior lightweight materials. This study expands the concept of nanoarchitecture to dense metal/ceramic composites, presenting co-continuous architectures of three-dimensional printed pyrolytic carbon shell reinforcements and electrodeposited nickel matrices. We demonstrate ductile compressive deformability with elongated ultrahigh strength plateaus, resulting in an extremely high combination of compressive strength and strain energy absorption. Simultaneously, property-to-weight ratios outperform those of lightweight nanolattices. Superior to cellular nanoarchitectures, interpenetrating nanocomposites may combine multiple size-dependent characteristics, whether mechanical or functional, which are radically antagonistic in existing materials. This provides a pathway toward previously unobtainable multifunctionality, extending far beyond lightweight structure applications.

| S-EPMC9385151 | biostudies-literature

Anomalous diffusion along metal/ceramic interfaces.

Project description:Interface diffusion along a metal/ceramic interface present in numerous energy and electronic devices can critically affect their performance and stability. Hole formation in a polycrystalline Ni film on an α-Al2O3 substrate coupled with a continuum diffusion analysis demonstrates that Ni diffusion along the Ni/α-Al2O3 interface is surprisingly fast. Ab initio calculations demonstrate that both Ni vacancy formation and migration energies at the coherent Ni/α-Al2O3 interface are much smaller than in bulk Ni, suggesting that the activation energy for diffusion along coherent Ni/α-Al2O3 interfaces is comparable to that along (incoherent/high angle) grain boundaries. Based on these results, we develop a simple model for diffusion along metal/ceramic interfaces, apply it to a wide range of metal/ceramic systems and validate it with several ab initio calculations. These results suggest that fast metal diffusion along metal/ceramic interfaces should be common, but is not universal.

| S-EPMC6286315 | biostudies-literature

Zirconia-Toughened Alumina Ceramic Wear Particles Do Not Elicit Inflammatory Responses in Human Macrophages.

Project description:Ten percent of patients undergoing total hip arthroplasty (THA) require revision surgery. One of the reasons for THA are wear particles released from the implants that can activate the immune defense and cause osteolysis and failure of the joint implant. The discrepancies between reports on toxicity and immunogenicity of the implant materials led us to this study in which we compared toxicity and immunogenicity of well-defined nanoparticles from Al2O3, zirconia-toughened alumina (ZTA), and cobalt chrome (CoCr), a human THP-1 macrophage cell line, human PBMCs, and therefrom-derived primary macrophages. None of the tested materials decreased the viability of THP-1 macrophages nor human primary macrophages at the 24 h time point, indicating that at concentrations from 0.05 to 50 µm3/cell the tested materials are non-toxic. Forty-eight hours of treatment of THP-1 macrophages with 5 µm3/cell of CoCr and Al2O3 caused 8.3-fold and 4.6-fold increases in TNF-α excretion, respectively, which was not observed for ZTA. The comparison between THP-1 macrophages and human primary macrophages revealed that THP-1 macrophages show higher activation of cytokine expression in the presence of CoCr and Al2O3 particles than primary macrophages. Our results indicate that ZTA is a non-toxic implant material with no immunogenic effects in vitro.

| S-EPMC10095128 | biostudies-literature

The peculiarity of the metal-ceramic interface.

Project description:Important properties of materials are strongly influenced or controlled by the presence of solid interfaces, i.e. from the atomic arrangement in a region which is a few atomic spacing wide. Using the quantitative analysis of atom column positions enabled by CS-corrected transmission electron microscopy and theoretical calculations, atom behaviors at and adjacent to the interface was carefully explored. A regular variation of Cu interplanar spacing at a representative metal-ceramic interface was experimentally revealed, i.e. Cu-MgO (001). We also found the periodic fluctuations of the Cu and Mg atomic positions triggered by the interfacial geometrical misfit dislocations, which are partially verified by theoretical calculations using empirical potential approach. Direct measurements of the bond length of Cu-O at the coherent regions of the interface showed close correspondence with theoretical results. By successively imaging of geometrical misfit dislocations at different crystallographic directions, the strain fields around the interfacial geometrical misfit dislocation are quantitatively demonstrated at a nearly three-dimensional view. A quantitative evaluation between the measured and calculated strain fields using simplified model around the geometrical misfit dislocation is shown.

| S-EPMC4473597 | biostudies-literature

Ceramic

Project description:Post-Infective Bowel Dysfunction following Campylobacter enteritis is characterised by reduced microbiota diversity and impaired microbiota recovery

| PRJEB52306 | ENA

Bulk Polymer-Derived Ceramic Composites of Graphene Oxide.

Project description:Bulk polymer-derived ceramic (PDC) composites of SiCO with an embedded graphene network were produced using graphene-coated poly(vinyl alcohol) (PVA) foams as templates. The pyrolysis of green bodies containing cross-linked polysiloxane, PVA foams, and graphene oxide (GO) resulted in the decomposition of PVA foams, compression of GO layers, and formation of graphitic domains adjacent to GO within the SiCO composite, leading to SiCO composites with an embedded graphene network. The SiCO/GO composite, with about 1.5% GO in the ceramic matrix, offered an increase in the electrical conductivity by more than 4 orders of magnitude compared to that of pure SiCO ceramics. Additionally, the unique graphene network in the SiCO demonstrated a drop in the observed thermal conductivity of the composite (∼0.8 W m-1 K-1). Young's modulus of the as-fabricated SiCO/GO composites was found to be around 210 MPa, which is notably higher than the reported values for similar composites fabricated from only ceramic precursors and PVA foams. The present approach demonstrates a facile and cost-effective method of producing bulk PDC composites with high electrical conductivity, good thermal stability, and low thermal conductivity.

| S-EPMC6641334 | biostudies-literature

Pseudotumor in ceramic-on-metal total hip arthroplasty.

Project description:The increasing demand for total hip arthroplasty (THA) in relatively young, high-demand patients has led to the use of hard-on-hard bearing surfaces. Adverse local tissue reaction/pseudotumor and elevated serum metal ion levels are commonly reported complications encountered in metal-on-metal THA, while audible articulation and rim fracture are reported in ceramic-on-ceramic THA. For this reason, ceramic-on-metal THA was implemented as an ideal hard-on-hard bearing combination. In this report, we describe a case of bilateral simultaneous ceramic-on-metal THA in a 69-year-old woman who presented 7 years postoperatively with unilateral hip pain associated with underlying pseudotumor and elevated serum cobalt and chromium ion levels. Pre-revision workup, intraoperative findings, and postoperative evaluation are included and suggest acetabular malposition as a potential source for complication.

| S-EPMC5712035 | biostudies-literature

In Situ Polymerization Permeated Three-Dimensional Li<sup>+</sup>-Percolated Porous Oxide Ceramic Framework Boosting All Solid-State Lithium Metal Battery.

Project description:Solid-state lithium battery promises highly safe electrochemical energy storage. Conductivity of solid electrolyte and compatibility of electrolyte/electrode interface are two keys to dominate the electrochemical performance of all solid-state battery. By in situ polymerizing poly(ethylene glycol) methyl ether acrylate within self-supported three-dimensional porous Li1.3Al0.3Ti1.7(PO4)3 framework, the as-assembled solid-state battery employing 4.5 V LiNi0.8Mn0.1Co0.1O2 cathode and Li metal anode demonstrates a high Coulombic efficiency exceeding 99% at room temperature. Solid-state nuclear magnetic resonance results reveal that Li+ migrates fast along the continuous Li1.3Al0.3Ti1.7(PO4)3 phase and Li1.3Al0.3Ti1.7(PO4)3/polymer interfacial phase to generate a fantastic conductivity of 2.0 × 10-4 S cm-1 at room temperature, which is 56 times higher than that of pristine poly(ethylene glycol) methyl ether acrylate. Meanwhile, the in situ polymerized poly(ethylene glycol) methyl ether acrylate can not only integrate the loose interfacial contact but also protect Li1.3Al0.3Ti1.7(PO4)3 from being reduced by lithium metal. As a consequence of the compatible solid-solid contact, the interfacial resistance decreases significantly by a factor of 40 times, resolving the notorious interfacial issue effectively. The integrated strategy proposed by this work can thereby guide both the preparation of highly conductive solid electrolyte and compatible interface design to boost practical high energy density all solid-state lithium metal battery.

| S-EPMC8097327 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data