Dataset Information

Factors Affecting Microbial Contamination on the Back Surface of Worn Soft Contact Lenses.

ABSTRACT:

Significance

The results of this study demonstrate that Smart Touch Technology packaging, which is designed to reduce and simplify contact lens handling before insertion, is effective in reducing the frequency of bacterial contamination of the back surface of contact lenses after short-term wear.

Purpose

The purpose of this study was to investigate the effect of lens packaging type, chelating agent, and finger contamination on microbial contamination on the back surface of worn soft contact lenses.

Methods

Twenty-five subjects completed each contralateral lens wear comparison in this randomized study: Smart Touch Technology versus conventional blister packaging for (1) silicone hydrogel lenses with ethylenediaminetetraacetic acid (EDTA) and (2) hydrogel lenses without EDTA in the packaging, and (3) silicone hydrogel lenses without EDTA versus hydrogel lenses with EDTA both in Smart Touch Technology packaging. Participants washed hands, underwent finger swabs, and inserted the lenses. After 45 minutes, lenses were removed aseptically and the posterior lens surfaces cultured.

Results

Thirty-eight subjects (average age, 30.9 ± 12.5 years) participated in this study. Overall, the level of back surface contamination was low for both lens materials, ranging from 0 to 43 colony-forming unit (CFU)/lens for the silicone hydrogel and 0 to 17 CFU/lens for the hydrogel lenses. The proportion of lenses with zero back surface contamination ranged from 16 to 64% for silicone hydrogel lenses and 28 to 64% for hydrogel lenses. Contact lenses from conventional packaging containing EDTA had 3.38 times increased risk (95% confidence interval [CI], 1.02 to 11.11; P = .05) of contamination being present compared with lenses from Smart Touch packaging with EDTA. Contact lenses from conventional packaging without EDTA had 3.4 times increased risk (95% CI, 1.02 to 11.36; P = .05) of contamination being present compared with Smart Touch packaging without EDTA, and silicone hydrogel lenses had a 6.28 times increased risk (95% CI, 1.65 to 23.81; P = .007) of contamination being present compared with hydrogels. The median (interquartile range) number of bacteria isolated from fingers used to perform lens insertion after handwashing but before lens insertion was not significantly different between the silicone hydrogel and hydrogel lenses (63.7 [204.2] vs. 59 [84.5], P = .09). Finger contamination was not significantly associated with lens contamination in the presence or absence of EDTA.

Conclusions

Smart Touch Technology packaging was effective in reducing the proportion of contaminated lenses. Although silicone hydrogel lenses were more likely to be contaminated, the presence of EDTA ameliorated this effect. Finger contamination was not associated with lens contamination.

SUBMITTER: Tan J

PROVIDER: S-EPMC8132605 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Background:It is unclear whether multifocal soft contact lenses (MFSCLs) affect visual quality when they are used for myopia control in juvenile myopes. The aim of this study was, therefore, to investigate the effect of MFSCLs on visual quality among juvenile myopia subjects. Methods:In a prospective, intervention study, thirty-three juvenile myopes were enrolled. Visual perception was assessed by a quality of vision (QoV) questionnaire with spectacles at baseline and after 1 month of MFSCL wear. At the one-month visit, the high (96%) contrast distance visual acuity (distance HCVA) and low (10%) contrast distance visual acuity (distance LCVA) were measured with single vision spectacle lenses, single vision soft contact lenses (SVSCLs) and MFSCLs in a random order. Wavefront aberrations were measured with SVSCLs, with MFSCLs, and without any correction. Results:Neither distance HCVA (p?>?0.05) nor distance LCVA (p?>?0.05) revealed any significant difference between MFSCLs, SVSCLs and single vision spectacle lenses. The overall score (the sum of ten symptoms) of the QoV questionnaire did not show a statistically significant difference between spectacles at baseline and after 1 month of MFSCL wear (p?=?0.357). The results showed that the frequency (p?<?0.001), severity (p?=?0.001) and bothersome degree (p?=?0.016) of halos were significantly worse when wearing MFSCLs than when wearing single vision spectacle lenses. In contrast, the bothersome degree caused by focusing difficulty (p?=?0.046) and the frequency of difficulty in judging distance or depth perception (p?=?0.046) were better when wearing MFSCLs than when wearing single vision spectacle lenses. Compared with the naked eye, MFSCLs increased the total aberrations (p?<?0.001), higher-order aberrations (p?<?0.001), trefoil (p?=?0.023), coma aberrations (p?<?0.001) and spherical aberrations (SA) (p?<?0.001). Compared with the SVSCLs, MFSCLs increased the total aberrations (p?<?0.001), higher-order aberrations (p?<?0.001), coma aberrations (p?<?0.001) and SA (p?<?0.001). The direction of SA was more positive (p?<?0.001) with the MFSCLs and more negative (p?=?0.001) with the SVSCLs compared with the naked eye. Conclusions:Wearing MFSCLs can provide satisfactory corrected visual acuity (both distance HCVA and distance LCVA). Although the lenses increased the aberrations, such as total aberrations and higher-order aberrations, there were few adverse effects on the distance HCVA, distance LCVA and visual perception after 1 month of MFSCL use. Trial registration:Chinese Clinical Trial Registry: ChiCTR-OOC-17012103. Registered 23 July 2017, http://www.chictr.org.cn/usercenter.aspx.

Project description:PURPOSE:To evaluate the impact of soft contact lens eye-fit on optical power by computational modelling and to produce correction maps for reversing this impact during the design process. METHODS:Finite element models of spherical and toric hydrogel contact lenses at varying nominal powers of -20 D to +20 D, base curves radii (R1b) of 8.2, 8.5, 8.8 mm, and overall diameters (d3) of 14.5, 15.0, 15.5 mm were generated. Lenses were fitted to computational eye models generated with human eyes' topography data. Combined eye-lens simulations were run under the boundary conditions of the tears' surface tension between the contact lens and the eye in addition to the eyelid blink pressure. Lens optical zone power changes were calculated through computational light-ray tracing methods following each simulation. RESULTS:Effective power changes (EPC) were affected negatively for all toric simulated lenses with power varying from -20 D to +20 D. Spherical lenses demonstrated similar behaviour, however with some positive EPC over the power range from -20 D to -10 D for spherical power (SPH) lenses. EPC assessment was between +0.25 D and -0.5 D for most lenses, however, lenses with prescriptions from +10 D to +20 D incurred EPC outside this range. The spherical lenses showed a maximum effective power change of +1.046 ± 0.338 D (Average Eye), and a minimum of -3.278 ± 0.731 D (Steep Eye). Similarly, the toric lenses showed a maximum of +1.501 ± 0.338 D (Average Eye), and a minimum of -3.514 ± 0.731 D (Steep Eye). EPC trends, along with minimum and maximum power, generally increased negatively as nominal lens prescription increased positively. Contact lens base curve selection affected the assessed effective power change for both spherical and toric lenses. The effect from lens total diameter for spherical lenses was less substantial than that for toric lenses. CONCLUSIONS:This study considered the impact of soft contact lens design parameters on effective optical power changes (EPC) after eye-fit. Spherical lenses experienced more EPC of clinical significance (>0.25 D) than toric lenses. Both types of lenses, spherical and toric (simple astigmatism), demonstrated similar trends in EPC on fitting from -20 D to +20 D, with lenses in the extremely positive and the extremely negative prescriptions demonstrating the highest EPCs. The lens base curve impacted the extent of EPC observed, with flatter base curves experiencing less power change. Diameter proved to impact toric lenses more than spherical ones, however generally the diameter has less effect on power change than base curve selection.

Project description:PurposeTo compare the visual performance of soft contact lenses reported to reduce myopia progression.MethodsIn a double-blind, randomized, crossover trial, 30 non-presbyopic myopes wore MiSight™, center-distance Proclear® Multifocal (+2.00 D add), and two prototype lenses for 1 week each. High- and low-contrast visual acuities at 6 m, and 70 and 40 cm; stereopsis at 40 cm; accommodative facility at 33 cm; and horizontal phoria at 3 m and 33 cm were measured after 1 week. Subjective performance was assessed on a numeric rating scale for vision clarity, lack of ghosting, vision stability, haloes, overall vision satisfaction, and ocular comfort. Frequency of eye-strain symptoms and willingness to purchase lenses were also reported with categorical responses. Participants reported wearing times (total and visually acceptable). Linear mixed models and chi-square tests were employed in analysis with level of significance set at 5%. Theoretical optical performance of all lenses was assessed with schematic myopic model eyes (-1.00, -3.00, and -6.00 D) by comparing the slope of the edge spread function (ESF), an indicator for optical performance/resolution and the blur patch size of the line spread function, an indicator for contrast, between the lenses.ResultsProclear Multifocal and MiSight provided the best distance acuities. However, the prototype lenses were rated significantly higher for many subjective variables, and there were no subjective variables where commercial lenses were rated significantly higher than the prototypes. Theoretical optical performance showed steeper slopes of the ESF and greater blur patch sizes of the LSP with commercial lenses, supporting the clinical findings of better visual acuities but reduced subjective performance. Participants wore prototypes longer and reported their vision acceptable for longer each day compared to MiSight. Both prototypes had the highest willingness-to-purchase rate.ConclusionsThe prototypes were better tolerated by myopes compared to the commercial soft contact lenses currently used for slowing myopia progression.