Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Experimental Investigation on Floating Solar-Driven Membrane Distillation Desalination Modules.

ABSTRACT: Membrane distillation (MD) processes need a relatively mild temperature gradient as the driving force for desalination. In the field, it is reasonable to utilize solar energy as the heat source for the feed, and seawater as the infinite cold source for condensation. Solar-driven MD provides a route for the practical application of seawater desalination at a small scale. In this work, we focus on floating MD modules with a solar heating bag as the power source, and perform proof-of-principle experiments on the MD performance under various conditioning parameters, including feed flow rate, feed temperature, salinity, air gap, and sea waves. The results indicate that floating solar-driven MD modules are feasible in terms of permeate flux and salt rejection ratio, and the upward evaporation MD configuration leads to a better performance in terms of permeate flux. The simulation and experiments also show that the natural sea waves disturb the heating bag and the MD module floating on the surface of seawater, and effectively enhance the feed circulation and transport in the system.

SUBMITTER: Miao Q

PROVIDER: S-EPMC8143288 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Nickel Chalcogenide Nanoparticles-Assisted Photothermal Solar Driven Membrane Distillation (PSDMD).

Project description:Developing photothermal solar driven membrane distillation (PSDMD) is of great importance in providing fresh water for remote off-grid regions. The production of freshwater through the PSDMD is driven by the temperature difference between feed and distillate sides created via the addition of efficient photothermal nanostructures. Here we proposed nickel sulfides and nickel tellurium nanoparticles (NPs) to be loaded into the polymeric membrane to enhance its performance. Ag and CuSe NPs are also considered for comparison as they are previously used for membrane distillation (MD). Our theoretical approach showed that all of the considered NPs increased the temperature of the PVDF membrane by around a few degrees. NiS and NiTe2 NPs are the most efficient solar light-to-heat converters compared to NiTe and NiS2 NPs due to their efficient absorption over the visible range. PVDF membrane loaded with 25% of NiCs NPs and a porosity of 32% produced a transmembrane vapor flux between 22 and 27 L/m2h under a 10-times-amplified sun intensity. Under the same conditions, the PVDF membrane loaded with CuSe and Ag NPs produced 15 and 18 L/m2h of vapor flux, respectively. The implantation of NPs through the membrane not only increased its surface temperature but also possessed a high porosity which provided a higher distillation and energy efficiency that reached 58% with NiS NPs. Finally, great agreement between our theoretical model and experimental measurement is obtained.

| S-EPMC9961219 | biostudies-literature

3D Photothermal Cryogels for Solar-Driven Desalination.

Project description:This paper reports the fabrication of photothermal cryogels for freshwater production via the solar-driven evaporation of seawater. Photothermal cryogels were prepared via in situ oxidative polymerization of pyrrole with ammonium persulfate on preformed poly(sodium acrylate) (PSA) cryogels. We found that the pyrrole concentration used in the fabrication process has a significant effect on the final PSA/PPy cryogels (PPCs), causing the as-formed polypyrrole (PPy) layer on the PPC to evolve from nanoparticles to lamellar sheets and to consolidated thin films. PPC fabricated using the lowest pyrrole concentration (i.e., PPC10) displays the best solar-evaporation efficiency compared to the other samples, which is further improved by switching the operative mode from floating to standing. Specifically, in the latter case, the apparent solar evaporation rate and solar-to-vapor conversion efficiency reach 1.41 kg m-2 h-1 and 96.9%, respectively, due to the contribution of evaporation from the exposed lateral surfaces. The distillate obtained from the condensed vapor, generated via solar evaporation of a synthetic seawater through PPC10, shows an at least 99.99% reduction of Na while all the other elements are reduced to a subppm level. We attribute the superior solar evaporation and desalination performance of PPC10 to its (i) higher photoabsorption efficiency, (ii) higher heat localization effect, (iii) open porous structure that facilitates vapor removal, (iv) rough pore surface that increases the surface area for light absorption and water evaporation, and (v) higher water-absorption capacity to ensure efficient water replenishment to the evaporative sites. It is anticipated that the gained know-how from this study would offer insightful guidelines to better designs of polymer-based 3D photothermal materials for solar evaporation as well as for other emerging solar-related applications.

| S-EPMC8289246 | biostudies-literature

Efficient Solar-Thermal Distillation Desalination Device by Light Absorptive Carbon Composite Porous Foam.

Project description:Solar-thermal driven desalination based on porous carbon materials has promise for fresh water production. Exploration of high-efficiency solar desalination devices has not solved issues for practical application, namely complicated fabrication, cost-effectiveness, and scalability. Here, direct solar-thermal carbon distillation (DS-CD) tubular devices are introduced that have a facile fabrication process, are scalable, and use an inexpensive but efficient microporous graphite foam coated with carbon nanoparticle and superhydrophobic materials. The "black" composite foam serving as a solar light absorber heats up salt water effectively to produce fresh water vapor, and the superhydrophobic surface of the foam traps the liquid feed in the device. Two proof-of-principle distillation systems are adopted, i.e., solar still and membrane distillation and the fabricated devices are evaluated for direct solar desalination efficiency. For the solar still, nanoparticle and fluorosilane coatings on the porous surface increase the solar energy absorbance, resulting in a solar-steam generation efficiency of 64% from simulated seawater at 1 sun. The membrane distillation demonstrates excellent vapor production (?6.6 kg m-2 h-1) with >99.5% salt rejection under simulated 3 sun solar-thermal irradiation. Unlike traditional solar desalination, the adaptable DS-CD can easily be scaled up to larger systems such as high-temperature tubular modules, presenting a promising solution for solar-energy-driven desalination.

| S-EPMC6686170 | biostudies-literature

Mass Transfer Analysis of Air-Cooled Membrane Distillation Configuration for Desalination.

Project description:It has been proposed that the air-cooled configuration for air gap membrane distillation is an effective way to simplify the system design and energy source requirement. This offers potential for the practical applications of membrane distillation on an industrial scale. In this work, membrane distillation tests were performed using a typical water-cooled membrane distillation (WCMD) configuration and an air-cooled membrane distillation (ACMD) configuration with various condensing plates and operating conditions. To increase the permeate flux of an ACMD system, the condensing plate in the permeate side should transfer heat to the atmosphere more effectively, such as using a more thermally conductive plate, adding fins, or introducing forced convection air flow. Importantly, a practical mass transfer model was proposed to describe the ACMD performance in terms of permeate flux. This model can be simplified by introducing specific correction values to the mass transfer coefficient of a WCMD process under the same conditions. The two factors relate to the capacity (B) and the efficiency (σ), which can be considered as the characteristic factors of a membrane distillation (MD) system. The experimental results are consistent with the theoretical estimations based on this model, which can be used to describe the performance of an MD process.

| S-EPMC8069192 | biostudies-literature

Enhancement of brackish water desalination using hybrid membrane distillation and reverse osmosis systems.

Project description:Desalination of geothermal brackish water by membrane distillation (MD) provides a low recovery rate, but integrating MD with reverse osmosis (RO) can maximize the production rate. In this study, different design configurations of a hybrid system involving brine recycling and cascading are studied via simulations, and the performance improvement due to the process integration is substantiated via the increased recovery rate and reduced specific energy consumption. Brine recycling is also found to improve the recovery rate considerably to 40% at an energy cost of 0.9 $/m3. However, this achievement is only valid when the final brine is recycled to the RO feed: when the final brine is recycled to the MD feed, the overall performance degrades because the recycled brine cools the feed and causes a serious reduction in the driving force and the consequent production rate. Configuring the hybrid system in multiple stages connected in series increases the recovery rate to 90% and reduces the specific energy consumption to 0.9 MJ/kg. Although the specific energy cost increases dramatically because external inter-stage heating is implemented, using a free energy source (such as a geothermal or waste-energy source) for inter-stage heating could provide the optimum configuration.

| S-EPMC6177152 | biostudies-literature

Nanoparticle-Enhanced PVDF Flat-Sheet Membranes for Seawater Desalination in Direct Contact Membrane Distillation.

Project description:In this study, hydrophobic functionalized carbon nanotubes (fCNTs) and silica nanoparticles (fSiO2NPs) were incorporated into polyvinylidene fluoride (PVDF) flat-sheet membranes to improve their performance in membrane distillation (MD). The performance of the as-synthesized membranes was evaluated against commercial reference polytetrafluoroethylene (PTFE) flat-sheet membranes. The water contact angle (WCA) and liquid entry pressure (LEP) of the PVDF membrane were compromised after incorporation of hydrophilic pore forming polyvinylpyrrolidone (PVP). These parameters were key in ensuring high salt rejections in MD processes. Upon incorporation of fCNTS and fSiO2NPs, WCA and LEP improved to 103.61° and 590 kPa, respectively. Moreover, the NP additives enhanced membrane surface roughness. Thus, an increase in membrane roughness improved WCA and resistance to membrane wetting. High salt rejection (>99%) and stable fluxes (39.77 kg m-2 h-1) were recorded throughout a 3 h process evaluation where 3.5 wt% NaCl solution was used as feed. These findings were recorded at feed temperature of 60 ℃. Evidently, this study substantiated the necessity of high feed temperatures towards high rates of water recovery.

| S-EPMC10052890 | biostudies-literature

membrane distillation biofilm

Project description:membrane distillation biofilm Raw sequence reads

| PRJNA481855 | ENA

Evaluating Critical Influencing Factors of Desalination by Membrane Distillation Process-Using Multi-Criteria Decision-Making.

Project description:Water desalination by membrane distillation (MD) can be affected by a wide range of operating parameters. The present work uses combinational approach of Analytical Hierarch process (AHP) and Fuzzy Analytical Hierarchy process (Fuzzy-AHP) to identify the most important parameters in the MD desalination. Five process parameters and key-performance indicators, named derivable outputs (DOs), are considered, along with the critical factors affecting these DOs in the current study. The DOs and the critical influencing factors (CIFs) are selected based on their experimental feasibility. The investigation involves five DOs, which are liquid entry pressure, thermal power consumption, permeate quality, permeate flux, and pumping (feed circulation) power. A total of twenty-five critical influencing factor were associated with the DOs. The identification of the DOs and CIFs was based on the literature review, and further analyses were performed. Both methods, AHP and Fuzzy-AHP, determined six extremely important CIFs in the desalination MD, which are feed temperature, feed concentration, or feed salinity; feed flow rate; membrane hydrophobicity; pore size; and membrane material. Moderately important CIFs are found to be four by both methods. These common CIFs are feed solution properties, membrane thickness, feed channel geometry, and pressure difference along the feed channel. Finally, the least preferred CIFs are four common in both methods that are MD configuration, duration of test, specific heat of feed solution, and viscosity.

| S-EPMC7996794 | biostudies-literature

Assessing thermoelectric membrane distillation performance: An experimental design approach.

Project description:Thermoelectric membrane distillation has shown promise as a new membrane distillation technique capable of improving energy consumption metrics. This study features an experimental design approach to investigating the performance of a thermoelectric membrane distillation system. Screening and full factorial designs were implemented in Minitab 16 to determine the optimal process conditions for minimizing the specific energy consumption of the system. The process parameter with the most significant impact on the specific energy consumption of thermoelectric membrane distillation systems was determined and a mathematical model for predicting the specific energy consumption was derived. The study showed that adjusting the feed flowrate, the most influential continuous parameter, from a sub-optimal level to an optimal level, while keeping other process variables at their optimal levels, could lead to a 34% reduction in the system's specific energy consumption. At the optimized process parameters of the thermoelectric membrane distillation system, the minimized specific energy consumption fell about 35% below the threshold value of 1,000 kWh/m3 found among the efficient membrane distillation systems in the literature.•Thermoelectric heat exchanger provides the driving force for the membrane distillation process•Seven process variables are assumed to influence the energy consumption of the distillation process•The variables are screened before being analyzed in a full factorial experimental design.

| S-EPMC10864625 | biostudies-literature

Optimization of Evaporation and Condensation Architectures for Solar-Driven Interfacial Evaporation Desalination.

Project description:Solar-driven interfacial evaporation is an ideal technology for seawater desalination, and the corresponding system is mainly composed of a solar evaporator and a condensing collector. The traditional scheme focuses on the evaporation efficiency of the evaporator. Still, it ignores the influence of condensing collection scheme on the overall efficiency, which is one of the obstacles to the practical use of solar seawater desalination. Here, we reported a new solar-driven interfacial evaporation seawater desalination system by studying the influence of the condensation architecture, i.e., vapor flow by a fan and an air pump, sidewall material, transparent cover shape and material, evaporation level, and transparent cover heating, on the apparent collection efficiency of the system. The apparent collection efficiency was up to over 90% after optimization. This study is expected to promote the practical application of solar evaporation desalination technology.

| S-EPMC9506556 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data