Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Insight into the Contributions of Surface Oxygen Vacancies on the Promoted Photocatalytic Property of Nanoceria.

ABSTRACT: Oxygen vacancies (OVs) have critical effects on the photoelectric characterizations and photocatalytic activity of nanoceria, but the contributions of surface OVs on the promoted photocatalytic properties are not clear yet. In this work, we synthesized ceria nanopolyhedron (P-CeO₂), ceria nanocube (C-CeO₂) and ceria nanorod (R-CeO₂), respectively, and annealed them at 600 °C in air, 30%, 60% or pure H₂. After annealing, the surface OVs concentration of ceria elevates with the rising of H₂ concentration. Photocatalytic activity of annealed ceria is promoted with the increasing of surface OVs, the methylene blue photodegradation ratio with pure hydrogen annealed of P-CeO₂, C-CeO₂ or R-CeO₂ is 93.82%, 85.15% and 90.09%, respectively. Band gap of annealed ceria expands first and then tends to narrow slightly with the rising of surface OVs, while the valence band (VB) and conductive band (CB) of annealed ceria changed slightly. Both of photoluminescence spectra and photocurrent results indicate that the separation efficiency of photoinduced electron-hole pairs is significantly enhanced with the increasing of the surface OVs concentration. The notable weakened recombination of photogenerated carrier is suggested to attribute a momentous contribution on the enhanced photocatalytic activity of ceria which contains surface OVs.

SUBMITTER: Lan Y

PROVIDER: S-EPMC8145243 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Photocatalytic Overall Water Splitting by SrTiO3 with Surface Oxygen Vacancies.

Project description:Strontium Titanate has a typical perovskite structure with advantages of low cost and photochemical stability. However, the wide bandgap and rapid recombination of electrons and holes limited its application in photocatalysis. In this work, a SrTiO3 material with surface oxygen vacancies was synthesized via carbon reduction under a high temperature. It was successfully applied for photocatalytic overall water splitting to produce clean hydrogen energy under visible light irradiation without any sacrificial reagent for the first time. The photocatalytic overall water splitting ability of the as-prepared SrTiO3-C950 is attributed to the surface oxygen vacancies that can make suitable energy levels for visible light response, improving the separation and transfer efficiency of photogenerated carriers.

| S-EPMC7767457 | biostudies-literature

Photogenerated Oxygen Vacancies in Hierarchical Ag/TiO2 Nanoflowers for Enhanced Photocatalytic Reactions.

Project description:Oxygen vacancy (Vo) creation and morphology controlling make significant contributions to the electronic and structural regulation of metal oxide semiconductors, yet an investigation about convenient approaches for fabricating hierarchical catalyst with abundant oxygen vacancies still has significant challenges. Here, we report a unique method to create abundant oxygen vacancies in hierarchical Ag/TiO2 nanoflowers during photocatalytic reaction, which is accompanied by light absorption variation and surface plasmon resonance (SPR) enhancement. Its high efficiency of photocatalytic H2 evolution (the highest apparent quantum yield reaches 3.2% at 365 nm) and rhodamine B degradation can be considered as benefits from the synergistic effects of the well-arranged hierarchical structure, the photogenerated oxygen vacancies, and the SPR of cocatalyst Ag. This work proposes an effective strategy to optimize the synthesis of regular hierarchical structures and enriches the research on the vital function of oxygen vacancies in photocatalytic reactions.

| S-EPMC7301581 | biostudies-literature

Hierarchical Co(OH)<sub>2</sub> Dendrite Enriched with Oxygen Vacancies for Promoted Electrocatalytic Oxygen Evolution Reaction.

Project description:It is critical to develop efficient oxygen evolution reaction (OER) catalysts with high catalytic properties for overall water splitting. Electrocatalysts with enriched vacancies are crucial for enhancing the catalytic activity of OER through defect engineering. We demonstrated the dealloying method in a reducing alkaline solution using the Co5Al95 alloy foil as a precursor to produce a new oxygen-vacancy-rich cobalt hydroxide (OV-Co(OH)2) hierarchical dendrite. The as-synthesised OV-Co(OH)2 showed superior electrocatalytic activities toward OER when compared to pristine cobalt hydroxide (p-Co(OH)2), which had a low onset overpotential of only 242 mV and a small Tafel slope of 64.9 mV dec-1. Additionally, for the high surface area provided by the hierarchical dendrite, both p-Co(OH)2 and OV-Co(OH)2 showed a superior activity as compared to commercial catalysts. Furthermore, they retained good catalytic properties without remarkably decaying at an overpotential of 350 mV for 12 h. The as-made OV-Co(OH)2 has prospective applications as an anode electrocatalyst in electrochemical water-splitting technologies with the advantages of superior OER performances, large surface area and ease of preparation.

| S-EPMC9026458 | biostudies-literature

Enhanced Exciton Effect and Singlet Oxygen Generation Triggered by Tunable Oxygen Vacancies on Bi2MoO6 for Efficient Photocatalytic Degradation of Sodium Pentachlorophenol.

Project description:Construction of the tunable oxygen vacancies (OVs) is widely utilized to accelerate molecular oxygen activation for boosting photocatalytic performance. Herein, the in-situ introduction of OVs on Bi2MoO6 was accomplished using a calcination treatment in an H2/Ar atmosphere. The introduced OVs can not only facilitate carrier separation, but also strengthen the exciton effect, which accelerates singlet oxygen generation through the energy transfer process. Superior carrier separation and abundant singlet oxygen played a crucial role in favoring photocatalytic NaPCP degradation. The optimal BMO-001-300 sample exhibited the fastest NaPCP degradation rate of 0.033 min-1, about 3.8 times higher than that of the pristine Bi2MoO6. NaPCP was effectively degraded and mineralized mainly through dechlorination, dehydroxylation and benzene ring opening. The present work will shed light on the construction and roles of OVs in semiconductor-based photocatalysis and provide a novel insight into ROS-mediated photocatalytic degradation.

| S-EPMC9735721 | biostudies-literature

Fabrication of Wide-Range-Visible Photocatalyst Bi2WO6-x nanoplates via Surface Oxygen Vacancies.

Project description:Bi2WO6 as a high visible-light-driven catalyst has been aroused broad interest. However, it can only be excitated by the light with λ < 450 nm and the solar energy utilization need to be improved. Here, the wide-range-visible photoresponse Bi2WO6-x nanoplates were fabricated by introducing surface oxygen vacancies through the controllable hydrogen reduction method. The visible photoresponse wavelength range is extended from 450 nm to more than 600 nm. In addition, the photocatalytic activity of Bi2WO6-x is also increased and is 2.1 times as high as that of pristine Bi2WO6. The extending of the photoresponse range and the enhancement of the photoactivity both can be attributed to the surface-oxygen-vacancy states. This is because surface-oxygen-vacancy states generated above and partly overlapping of with the valence band (VB) will result in the rising of valence band maximum (VBM), thus broadening the VB width. This approach is proposed to develop many types of wide-range-visible optical materials and to be applicable to many narrow and wide bandgap materials.

| S-EPMC4726091 | biostudies-literature

Optical and Photocatalytic Properties of Br-Doped BiOCl Nanosheets with Rich Oxygen Vacancies and Dominating {001} Facets.

Project description:Crystal facet engineering and nonmetal doping are regarded as effective strategies for improving the separation of charge carriers and photocatalytic activity of semiconductor photocatalysts. In this paper, we developed a facial method for fabricating oxygen-deficient Br-doped BiOCl nanosheets with dominating {001} facets through a traditional hydrothermal reaction and explored the impact of the Br doping and specific facets on carrier separation and photocatalytic performance. The morphologies, structures, and optical and photocatalytic properties of the obtained products were characterized systematically. The BiOCl samples prepared by the hydrothermal reaction exhibited square-like shapes with dominating {001} facets. Photodeposition results indicated that photoinduced electrons preferred to transfer to {001} facets because of the strong internal static electric fields in BiOCl nanosheets with dominating {001} facets. Br doping not only contributed to the formation of impurity energy levels that could promote light absorption but introduced a large number of surface oxygen vacancies (VO) in BiOCl photocatalysts, which was beneficial for photocatalytic performance. Moreover, the photocatalytic activities of these products under visible light were tested by degradation of rhodamine B (RhB). Because of the synergistic effect of the dominating {001} facets, Br doping, and rich VO, oxygen-deficient Br-doped BiOCl nanosheets exhibited improved carrier separation, visible light absorption, and photocatalytic efficiency.

| S-EPMC9318533 | biostudies-literature

Cobalt doped titania-carbon nanosheets with induced oxygen vacancies for photocatalytic degradation of uranium complexes in radioactive wastes.

Project description:The photocatalytic degradation of uranium complexes is considered among the most efficient techniques for the efficient removal of uranium ions/complexes from radioactive wastewater. Described here is a nanostructured photocatalyst based on a cobalt-doped TiO2 composite with induced oxygen vacancies (Co@TiO2-C) for the photocatalytic removal of uranium complexes from contaminated water. The synergy between oxygen vacancies and Co-doping produced a material with a 1.7 eV bandgap, while the carbon network facilitates electron movement and hinders the e-h recombination. As a result, the new photocatalyst enables the decomposition of uranium-arsenazo iii complexes (U-ARZ3), followed by photocatalytic reduction of hexavalent uranium to insoluble tetravalent uranium. Combined with the nanosheet structure's high surface area, the photocatalytic decomposition, reduction efficiency, and kinetics were significantly enhanced, achieving almost complete U(vi) removal in less than 20 minutes from solution with a concentration as high as 1000 mL g-1. Moreover, the designed photocatalyst exhibits excellent stability and reusability without decreasing the photocatalytic performance after 5 cycles.

| S-EPMC9724698 | biostudies-literature

Dynamics of Photo-Induced Surface Oxygen Vacancies in Metal-Oxide Semiconductors Studied Under Ambient Conditions.

Project description:Surface-enhanced Raman spectroscopy (SERS) is a powerful analytical technique commonly used in the detection of traces of organic molecules. The mechanism of SERS is of a dual nature, with Raman scattering enhancements due to a combination of electromagnetic (EM) and chemical contributions. In conventional SERS, the EM component is largely responsible for the enhancement, with the chemical contribution playing a less significant role. An alternative technique, called photo-induced enhanced Raman spectroscopy (PIERS) has been recently developed, using a photo-activated semiconductor substrate to give additional chemical enhancement of Raman bands over traditional SERS. This enhancement is assigned to surface oxygen vacancies (V o) formed upon pre-irradiation of the substrate. In this work, the exceptional chemical contribution in PIERS allows for the evaluation of atomic V o dynamics in metal oxide surfaces. This technique is applied to study the formation and healing rates of surface-active V o in archetypical metal-oxide semiconductors, namely, TiO2, WO3, and ZnO. Contrary to conventional analytical tools, PIERS provides intuitive and valuable information about surface stability of atomic defects at ambient pressure and under operando conditions, which has important implications in a wide range of applications including catalysis and energy storage materials.

| S-EPMC6864511 | biostudies-literature

The Structure of Oxygen Vacancies in the Near-Surface of Reduced CeO2 (111) Under Strain.

Project description:Strain has been widely recognized as important for tuning the behavior of defects in metal oxides since properties such as defect configuration, electronic structure, excess charge localization, and local atomic distortions may be affected by surface strain. In CeO2, the most widely used promoter in three-way catalysts and solid state electrolyte in fuel cells, the behaviors of oxygen vacancies, and associated Ce3+ polarons are crucial in applications. Recent STM and AFM investigations as well as DFT-based calculations have indicated that in the near-surface of CeO2 (111), at low temperatures and vacancy concentrations, subsurface oxygen vacancies are more stable than surface ones, and the Ce3+ ions are next-nearest neighbors to both types of vacancies, which can be explained by the better ability of the system to relax the lattice strain induced by vacancy formation as well as by the excess charge localization. The results also revealed that the interaction between first-neighbor vacancies is repulsive. In this work, the relative stability of surface and subsurface oxygen vacancies at the CeO2 (111) surface under in-plane strain is investigated by means of DFT+U calculations. The tensile strain favors isolated surface vacancies with next nearest neighbor polarons, whereas isolated subsurface vacancies with nearest neighbor polarons are energetically favored under compressive strain. In addition, the formation of both surface and subsurface dimers is favored over having corresponding isolated species under compressive strain, which implies the possibility of controlling the formation of vacancy clusters using strain. In many applications, ceria is employed as a supported thin film or within a heterostructure in which ceria can be strained, and this study shows that strain can be a useful handle to tune properties of such materials.

| S-EPMC6592146 | biostudies-literature

Carbonaceous Material Modified MoO<sub>2</sub> Nanospheres with Oxygen Vacancies for Enhanced Visible-Light Photocatalytic Oxidative Coupling of Benzylamine.

Project description:Surface oxygen vacancy (OV) plays a pivotal role in the activation of molecular oxygen and separation of electrons and holes in photocatalysis. Herein, carbonaceous materials-modified MoO2 nanospheres with abundant surface OVs (MoO2/C-OV) were successfully synthesized via glucose hydrothermal processes. In situ introduction of carbonaceous materials triggered a reconstruction of the MoO2 surface, which introduced abundant surface OVs on the MoO2/C composites. The surface oxygen vacancies on the obtained MoO2/C-OV were confirmed via electron spin resonance spectroscopy (ESR) and X-ray photoelectron spectroscopy (XPS). The surface OVs and carbonaceous materials boosted the activation of molecular oxygen to singlet oxygen (1O2) and superoxide anion radical (•O2-) in selectively photocatalytic oxidation of benzylamine to imine. The conversion of benzylamine was 10 times that of pristine MoO2 nanospheres with a high selectivity under visible light irradiation at 1 atm air pressure. These results open an avenue to modify Mo-based materials for visible light-driven photocatalysis.

| S-EPMC10302678 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data