Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Graphene Formation through Pulsed Wire Discharge of Graphite Strips in Water: Exfoliation Mechanism.

ABSTRACT: This study aims to clarify the mechanism of exfoliation of graphene through electrical pulsed wire discharge (PWD) of a graphite strip, made by the compression of inexpensive expanded graphite in water. The explosion of the graphite strip was visualized using a high-speed video camera. During the energized heating of the sample, explosions, accompanied by shock waves due to expansion of gas inside the sample, occurred at various locations of the sample, and the sample started to expand rapidly. The exfoliated graphene was observed as a region with low light transmittance. The PWD phenomenon of graphite strips, a type of porous material, is reasonably explained by the change in electrical resistivity of the sample during discharge and the light emission due to energy transition of the excited gas.

SUBMITTER: Tanaka S

PROVIDER: S-EPMC8148139 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Highly Water-Dispersible Graphene Nanosheets From Electrochemical Exfoliation of Graphite.

Project description:The electrochemical exfoliation of graphite has been considered to be an effective approach for the mass production of high-quality graphene due to its easy, simple, and eco-friendly synthetic features. However, water dispersion of graphene produced in the electrochemical exfoliation method has also been a challenging issue because of the hydrophobic properties of the resulting graphene. In this study, we report the electrochemical exfoliation method of producing water-dispersible graphene that importantly contains the relatively low oxygen content of <10% without any assistant dispersing agents. Through the mild in situ sulfate functionalization of graphite under alkaline electrochemical conditions using a pH buffer, the highly water-dispersible graphene could be produced without any additional separation processes of sedimentation and/or centrifugation. We found the resulting graphene sheets to have high crystalline basal planes, lateral sizes of several μm, and a thickness of <5 nm. Furthermore, the high aqueous dispersion stability of as-prepared graphene could be demonstrated using a multi-light scattering technique, showing very little change in the optical transmittance and the terbiscan stability index over time.

| S-EPMC8335538 | biostudies-literature

Role of peroxide ions in formation of graphene nanosheets by electrochemical exfoliation of graphite.

Project description:This study demonstrates a facile, mild and environmentally-friendly sustainable (soft processing) approach for the efficient electrochemical exfoliation of graphite using a sodium hydroxide/hydrogen peroxide/water (NaOH/H2O2/H2O) system that can produce high-quality, anodic few-layer graphene nanosheets in 95% yield at ambient reaction conditions. The control experiment conducted using NaOH/H2O revealed the crucial role of H2O2 in the exfoliation of graphite. A possible exfoliation mechanism is proposed. The reaction of H2O2 with hydroxyl ions (HO(-)) leads to the formation of highly nucleophilic peroxide ions (O2(2-)), which play a crucial role in the exfoliation of graphite via electrochemical-potential-assisted intercalation and strong expansion of graphite sheets.

| S-EPMC3937785 | biostudies-literature

Effects of geometry on large-scale tube-shear exfoliation of graphite to multilayer graphene and nanographite in water.

Project description:Industrially scalable methods for the production of graphene and other nanographites are needed to achieve cost-efficient commercial products. At present, there are several available routes for the production of these materials but few allow large-scale manufacturing and environmentally friendly low-cost solvents are rarely used. We have previously demonstrated a scalable and low-cost industrial route to produce nanographites by tube-shearing in water suspensions. However, for a deeper understanding of the exfoliation mechanism, how and where the actual exfoliation occurs must be known. This study investigates the effect of shear zone geometry, straight and helical coil tubes, on this system based on both numerical simulation and experimental data. The results show that the helical coil tube achieves a more efficient exfoliation with smaller and thinner flakes than the straight version. Furthermore, only the local wall shear stress in the turbulent flow is sufficient for exfoliation since the laminar flow contribution is well below the needed range, indicating that exfoliation occurs at the tube walls. This explains the exfoliation mechanism of water-based tube-shear exfoliation, which is needed to achieve scaling to industrial levels of few-layer graphene with known and consequent quality.

| S-EPMC6586880 | biostudies-literature

High-yield scalable graphene nanosheet production from compressed graphite using electrochemical exfoliation.

Project description:Electrochemical exfoliation is a promising bulk method for producing graphene from graphite; in this method, an applied voltage drives ionic species to intercalate into graphite where they form gaseous species that expand and exfoliate individual graphene sheets. However, a number of obstacles have prevented this approach from becoming a feasible production route; the disintegration of the graphite electrode as the method progresses is the chief difficulty. Here we show that if graphite powders are contained and compressed within a permeable and expandable containment system, the graphite powders can be continuously intercalated, expanded, and exfoliated to produce graphene. Our data indicate both high yield (65%) and extraordinarily large lateral size (>30 ?m) in the as-produced graphene. We also show that this process is scalable and that graphene yield efficiency depends solely on reactor geometry, graphite compression, and electrolyte transport.

| S-EPMC6162260 | biostudies-other

Effects of Tip Sonication Parameters on Liquid Phase Exfoliation of Graphite into Graphene Nanoplatelets.

Project description:Graphene nanoplatelets (GNPs) can be produced by exfoliating graphite in solvents via high-power tip sonication. In order to understand the influence of tip sonication parameters on graphite exfoliation to form GNPs, three typical flaked graphite samples were exfoliated into GNPs via tip sonication at power of 60, 100, 200, or 300 W for 10, 30, 60, 90, 120, or 180 min. The concentration of GNP dispersions, the size and defect density of the produced GNPs, and the sedimentation behavior of GNP dispersions produced under various tip sonication parameters were determined. The results indicated that the concentration of the GNP dispersions was proportional to the square root of sonication energy input (the product of sonication power and time). The size and ID/IG values (determined by Raman spectrum) of GNPs produced under various tip sonication powers and times ranged from ~ 1 to ~ 3 μm and ~ 0.1 to ~ 0.3, respectively, which indicated that all the produced GNPs were of high quality. The sedimentation behavior of GNP dispersions showed that the dispersions were favorably stable, and the concentration of each GNP dispersion was ~ 70% of its initial concentration after sedimentation for 96 h. Moreover, the TEM images and electron diffraction patterns were used to confirm that the produced GNPs were few-layer. This study has important implications for selecting the suitable tip sonicating parameters in exfoliating graphite into GNPs.

| S-EPMC6097981 | biostudies-literature

Ultrasonic-Assisted Diels-Alder Reaction Exfoliation of Graphite into Graphene with High Resveratrol Adsorption Capacity.

Project description:Scalable preparation of graphene with high adsorption capacity is an important prerequisite for fully realizing its commercial application. Herein, we propose an environmentally friendly route for exfoliation of graphene, which is established based on the Diels-Alder reaction. In our route, N-(4-hydroxyl phenyl) maleimide enters between the flakes as an intercalating agent and participates in the Diels-Alder reaction as a dienophile to increase the interlayer spacing of graphite. Then, graphite is exfoliated into graphene with the aid of ultrasound. The exfoliated product is hydroxyl phenyl functionalized graphene with a thickness of 0.5-1.5 nm and an average lateral size of about 500-800 nm. The exfoliation process does not involve any acid or catalyst and would be a safe and environmentally friendly approach. In addition, the exfoliated graphite shows high resveratrol adsorption capacity, which is ten times that of macroporous resins reported in the literature. Thus, the method proposed herein yields exfoliated graphite with high resveratrol adsorption capacity and is of great significance for the mass production of graphene for practical applications.

| S-EPMC8623989 | biostudies-literature

Exfoliation and performance properties of non-oxidized graphene in water.

Project description:Single-layered graphene has unique electronic, chemical, and electromechanical properties. Recently, graphite exfoliation in N-methylpyrrolidone and molten salt has been demonstrated to generate monolayer exfoliated graphene sheets (EGS). However, these solvents are either high-priced or require special care and have high boiling points and viscosities, making it difficult to deposit the dispersed graphene onto substrates. Here we show a universal principle for the exfoliation of graphite in water to single-layered and several-layered graphene sheets via the direct exfoliation of highly oriented pyrolytic graphite (HOPG) using pyridinium tribromide (Py(+)Br3(-)). Electrical conductivity >5100?S/cm was observed for filtered graphene paper, and the EGS exhibited superior performance as a hole transport layer compared to the conventional material N,N-di(naphthalene-1-yl)-N,N-diphenylbenzidine at low voltage. The overall results demonstrate that this method is a scalable process for the preparation of highly conductive graphene for use in the commercial manufacture of high-performance electronic devices.

| S-EPMC3905268 | biostudies-literature

Mechanical Exfoliation of Expanded Graphite to Graphene-Based Materials and Modification with Palladium Nanoparticles for Hydrogen Storage.

Project description:Hydrogen is a promising green fuel carrier that can replace fossil fuels; however, its storage is still a challenge. Carbon-based materials with metal catalysts have recently been the focus of research for solid-state hydrogen storage due to their efficacy and low cost. Here, we report on the exfoliation of expanded graphite (EG) through high shear mixing and probe tip sonication methods to form graphene-based nanomaterial ShEG and sEG, respectively. The exfoliation processes were optimized based on electrochemical capacitance measurements. The exfoliated EG was further functionalized with palladium nanoparticles (Pd-NP) for solid-state hydrogen storage. The prepared graphene-based nanomaterials (ShEG and sEG) and the nanocomposites (Pd-ShEG and Pd-sEG) were characterized with various traditional techniques (e.g., SEM, TEM, EDX, XPS, Raman, XRD) and the advanced high-resolution pair distribution function (HRPDF) analysis. Electrochemical hydrogen uptake and release (QH) were measured, showing that the sEG decorated with Pd-NP (Pd-sEG, 31.05 mC cm-2) and ShEG with Pd-NP (Pd-ShEG, 24.54 mC cm-2) had a notable improvement over Pd-NP (9.87 mC cm-2) and the composite of Pd-EG (14.7 mC cm-2). QH showed a strong linear relationship with an effective surface area to volume ratio, indicating nanoparticle size as a determining factor for hydrogen uptake and release. This work is a promising step toward the design of the high-performance solid-state hydrogen storage devices through mechanical exfoliation of the substrate EG to control nanoparticle size and dispersion.

| S-EPMC10534434 | biostudies-literature

Hyperstage Graphite: Electrochemical Synthesis and Spontaneous Reactive Exfoliation.

Project description:Covalent modification of the ?-electron basal planes of graphene enables the formation of new materials with enhanced functionality. An electrochemical method is reported for the formation of what is referred to as a Hyperstage-1 graphite intercalation compound (GIC), which has a very large interlayer spacing d001 > 15.3 Å and contains disordered interstitial molecules/ions. This material is highly activated and undergoes spontaneous exfoliation when reacted with diazonium ions to produce soluble graphenes with high functionalization densities of one pendant aromatic ring for every 12 graphene carbons. Critical to achieving high functionalization density is the Hyperstage-1 GIC state, a weakening of the van der Waals coupling between adjacent graphene layers, and the ability of reactants to diffuse into the disordered intercalate phase between the layers. Graphene functionalization with 3,5-dinitrophenyl groups provides for exceptional dispersibility (0.24 mg mL-1 ) in N,N-dimethylformamide and for conjugation with amines.

| S-EPMC6415547 | biostudies-literature

Impact of probe sonication and sulfuric acid pretreatment on graphene exfoliation in water.

Project description:Graphene is a 2D material with promising commercial applications due to its physicochemical properties. Producing high-quality graphene economically and at large scales is currently of great interest and demand. Here, the potential of producing high-quality graphene at a large scale via water-phase exfoliation methods is investigated. By altering exfoliation parameters, the production yield of graphene and flake size are evaluated. Pretreatment of the precursor graphite powder using acidic solutions of H2SO4 at different concentrations is found to increase further the yield and structural quality of the exfoliated graphene flakes. These findings are confirmed through various spectroscopy and surface characterization techniques. Controlling flake size, thickness, and yield are demonstrated via optimization of the sonication process, centrifuge time, and H2SO4 pretreatment.

| S-EPMC10613256 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data