Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Colorimetric sensing of cephradine through polypropylene glycol functionalized gold nanoparticles.

ABSTRACT: The development of metal nanoparticle-based facile colorimetric assays for drugs and insecticides is an emerging area of current scientific research. In the present work, polypropylene glycol was used for stabilization of gold nanoparticles (AuNPs) in a simple one-pot two-phase process and subsequently employed it for the specific detection of cephradine (CPH). The characterization of the prepared PPG-AuNPs was conducted through various analytical techniques such as UV-visible spectrophotometry, Fourier transform infrared spectroscopy, atomic force microscopy (AFM), zeta potential and zetasizer techniques. As the major target of the study, the stabilized PPG-AuNPs were employed for colorimetric detection of CPH and other drugs. Typical wine-red colour of PPG-AuNPs disappeared immediately and surface plasmon resonance band quenched by addition of CPH in the presence of several other interferents (drugs and salts) and in real samples. PPG-AuNPs permitted efficient, selective, reliable and rapid determination in a concentration range of 0.01-120 mM with a detection limit (LoD) of 11.0 mM. The developed sensor has the potential to be used for fast scanning of pharmaceutical formulations for quantification of CPH at production facilities.

SUBMITTER: Raja DA

PROVIDER: S-EPMC8150016 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Resorcinol Functionalized Gold Nanoparticles for Formaldehyde Colorimetric Detection.

Project description:Gold nanoparticles functionalized with resorcinol moieties have been prepared and used for detecting formaldehyde both in solution and gas phases. The detection mechanism is based on the color change of the probe upon the aggregation of the nanoparticles induced by the polymerization of the resorcinol moieties in the presence of formaldehyde. A limit of detection of 0.5 ppm in solution has been determined. The probe can be deployed for the detection of formaldehyde emissions from composite wood boards.

| S-EPMC6409679 | biostudies-literature

Colorimetric Immunosensor by Aggregation of Photochemically Functionalized Gold Nanoparticles.

Project description:A colorimetric immunosensor based on local surface plasmon resonance by gold nanoparticles is presented, and its application for the detection of human immunoglobulin G (IgG) is demonstrated. The color change of the colloidal solution is produced by nanoparticle aggregation, a process that can be tuned by the presence of the analyte once the nanoparticles are functionalized. In comparison to common functionalization techniques, the procedure described here is simpler, low-cost, and effective in binding antibodies upright on the gold surface. The dose-response curve is similar to that resulting in typical immunoassay platforms and is satisfactorily described by the proposed theoretical model. Human IgG at concentration levels of few hundreds of nanograms per milliliter can be detected by eyes within a few minutes, thereby making the colorimetric immunosensor proposed here a powerful tool in several areas, with urine test in medical diagnostics being the most immediate.

| S-EPMC6044629 | biostudies-literature

Facile synthesis of antibiotic-functionalized gold nanoparticles for colorimetric bacterial detection.

Project description:The development of quick and efficient methods for the detection of pathogenic bacteria is urgently needed for the diagnosis of infectious diseases and the control of microbiological contamination in global waterways, potable water sources and the food industry. This contribution will describe the synthesis of gold nanoparticles and their conjugation to broad spectrum, polypeptide and β-lactam antibiotics that function as both reducing agents and surface protectants (ATB@AuNP). Nanoparticle colloids examined using transmission electron microscopy are generally spherical in shape and range from 2-50 nm in size. Dynamic light scattering and infrared spectroscopy were also used to confirm encapsulation of the AuNP surface by antibiotic molecules. ATB@AuNP were then used to detect 3 common pathogenic bacterial species: Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. The colour of the AuNP colloid was monitored visually and using UV-visible spectroscopy. A red shift of the UV visible absorbance and a visible colour change following introduction of each pathogen is indicative of ATB binding to the bacteria surface, ascribed to AuNP agglomeration. This work demonstrates that ATB@AuNP may be an efficient and high throughput tool for the rapid detection of common bacterial contaminants.

| S-EPMC8697705 | biostudies-literature

Chitosan-capped gold nanoparticles for selective and colorimetric sensing of heparin.

Project description:In this contribution, novel chitosan-stabilized gold nanoparticles (AuNPs) were prepared by mixing chitosan with citrate-reductive AuNPs under appropriate conditions. The as-prepared chitosan-stabilized AuNPs were positively charged and highly stably dispersed in aqueous solution. They exhibited weak resonance light scattering (RLS) intensity and a wine red color. In addition, the chitosan-stabilized AuNPs were successfully utilized as novel sensitive probes for the detection of heparin for the first time. It was found that the addition of heparin induced a strong increase of RLS intensity for AuNPs and the color change from red to blue. The increase in RLS intensity and the color change of chitosan-stabilized AuNPs caused by heparin allowed the sensitive detection of heparin in the range of 0.2-60 ?M (~6.7 U/mL). The detection limit for heparin is 0.8 ?M at a signal-to-noise ratio of 3. The present sensor for heparin detection possessed a low detection limit and wide linear range. Additionally, the proposed method was also applied to the detection of heparin in biological media with satisfactory results.

| S-EPMC3782634 | biostudies-literature

A colorimetric method for the molecular weight determination of polyethylene glycol using gold nanoparticles.

Project description:A gold nanoparticle (AuNP)-based colorimetric method was developed for the molecular weight (MW) determination of polyethylene glycol (PEG), a commonly used hydrophilic polymer. Addition of a salt solution to PEG-coated AuNP solutions helps in screening the electrostatic repulsion between nanoparticles and generating a color change of the solutions from wine red to blue in 10 min in accordance with the MW of PEG, which illustrates the different stability degrees (SDs) of the AuNPs. The SDs are calculated by the absorbance ratios of the stable to the aggregated AuNPs in the solution. The root mean square end-to-end length (〈h2〉1/2) of PEG molecules shows a linear fit to the SDs of the PEG-coated AuNPs in a range of 1.938 ± 0.156 to 10.151 ± 0.176 nm. According to the Derjaguin-Landau-Verwey-Overbeek theory, the reason for this linear relationship is that the thickness of the PEG adlayer is roughly equivalent to the 〈h2〉1/2 of the PEG molecules in solution, which determines the SDs of the AuNPs. Subsequently, the MW of the PEG can be obtained from its 〈h2〉1/2 using a mathematical relationship between 〈h2〉1/2 and MW of PEG molecule. Applying this approach, we determined the 〈h2〉1/2 and the MW of four PEG samples according to their absorbance values from the ordinary ultraviolet-visible spectrophotometric measurements. Therefore, the MW of PEG can be distinguished straightforwardly by visual inspection and determined by spectrophotometry. This novel approach is simple, rapid, and sensitive.

| S-EPMC3878192 | biostudies-literature

Highly Sensitive and Selective Colorimetric Detection of Methylmercury Based on DNA Functionalized Gold Nanoparticles.

Project description:A new colorimetric detection of methylmercury (CH?Hg?) was developed, which was based on the surface deposition of Hg enhancing the catalytic activity of gold nanoparticles (AuNPs). The AuNPs were functionalized with a specific DNA strand (HT7) recognizing CH?Hg?, which was used to capture and separate CH?Hg? by centrifugation. It was found that the CH?Hg? reduction resulted in the deposition of Hg onto the surface of AuNPs. As a result, the catalytic activity of the AuNPs toward the chromogenic reaction of 3,3,5,5-tetramethylbenzidine (TMB)-H?O? was remarkably enhanced. Under optimal conditions, a limit of detection of 5.0 nM was obtained for CH?Hg? with a linear range of 10?200 nM. We demonstrated that the colorimetric method was fairly simple with a low cost and can be conveniently applied to CH?Hg? detection in environmental samples.

| S-EPMC6111283 | biostudies-literature

Single chain fragment variable recombinant antibody functionalized gold nanoparticles for a highly sensitive colorimetric immunoassay.

Project description:In this report, the peptide linker connecting scFv V(H) and V(L) domains were genetically modified to contain different amino acids (i.e. cysteine (scFv-cys) or histidines (scFv-his)) to enable the scFv to adsorb or self-assemble onto the gold nanoparticles (NPs). The scFv-cys stabilized gold NPs were used to develop a highly sensitive colorimetric immunosensor. The scFv-cys stabilized gold NPs were characterized by UV-vis spectra, transmission electron microscope (TEM) and FTIR. After adding the antigen rabbit IgG, the solution of scFv-cys stabilized gold NPs shows obvious visible color change from deep red to light purple due to the aggregation of the gold nanoparticles. Based on the colorimetric aggregation of scFv-cys stabilized gold NPs, the immunosensor exhibits high sensitivity with a detection limit of 1.7 nM and good specificity. The good properties of the colorimetric aggregation immunosensor can be attributed to the small size of scFv and the covalent link between the scFv and gold NPs that improve the better orientation and enhance the probe density. With the advantages of speed, simplicity and specificity, the colorimetric immunoassay based on the functionalized scFv stabilized gold NPs represents a promising approach for protein analysis and clinical diagnostics.

| S-EPMC2691774 | biostudies-literature

Good's buffers have various affinities to gold nanoparticles regulating fluorescent and colorimetric DNA sensing.

Project description:Citrate-capped gold nanoparticles (AuNPs) are highly important for sensing, drug delivery, and materials design. Many of their reactions take place in various buffers such as phosphate and Good's buffers. The effect of buffer on the surface properties of AuNPs is critical, yet this topic has not been systematically explored. Herein, we used halides such as fluoride, chloride, and bromide as probes to measure the relative adsorption strength of six common buffers. Among them, HEPES had the highest adsorption affinity, while MES, citrate and phosphate were weakly adsorbed with an overall ranking of HEPES > PIPES > MOPS > MES > citrate, phosphate. The adsorption strength was reflected from the inhibited adsorption of DNA and from the displacement of pre-adsorbed DNA. This conclusion is also supported by surface enhanced Raman spectroscopy. Furthermore, some buffer molecules did not get adsorbed instantaneously, and the MOPS buffer took up to 1 h to reach equilibrium. Finally, a classic label-free AuNP-based colorimetric sensor was tested. Its sensitivity increased by 15.7-fold when performed in a MES buffer compared to a HEPES buffer. This study has articulated the importance of buffer for AuNP-based studies and how it can improve sensors and yield more reproducible experimental systems.

| S-EPMC8159396 | biostudies-literature

Highly Sensitive Colorimetric Assay for Determining Fe<sup>3+</sup> Based on Gold Nanoparticles Conjugated with Glycol Chitosan.

Project description:A highly sensitive and simple colorimetric assay for the detection of Fe3+ ions was developed using gold nanoparticles (AuNPs) conjugated with glycol chitosan (GC). The Fe3+ ion coordinates with the oxygen atoms of GC in a hexadentate manner (O-Fe3+-O), decreasing the interparticle distance and inducing aggregation. Time-of-flight secondary ion mass spectrometry showed that the bound Fe3+ was coordinated to the oxygen atoms of the ethylene glycol in GC, which resulted in a significant color change from light red to dark midnight blue due to aggregation. Using this GC-AuNP probe, the quantitative determination of Fe3+ in biological, environmental, and pharmaceutical samples could be achieved by the naked eye and spectrophotometric methods. Sensitive response and pronounced color change of the GC-AuNPs in the presence of Fe3+ were optimized at pH 6, 70°C, and 300?mM NaCl concentration. The absorption intensity ratio (A700/A510) linearly correlated to the Fe3+ concentration in the linear range of 0-180??M. The limits of detection were 11.3, 29.2, and 46.0?nM for tap water, pond water, and iron supplement tablets, respectively. Owing to its facile and sensitive nature, this assay method for Fe3+ ions can be applied to the analysis of drinking water and pharmaceutical samples.

| S-EPMC5463166 | biostudies-literature

Highly specific colorimetric detection based on aggregation of l-cysteine functionalized gold nanoparticles for cypermethrin in water samples.

Project description:A fast, simple, and selective colorimetric assay for quantifying cypermethrin in water samples is proposed using l-cysteine functionalized gold nanoparticles (AuNPs@Cyst). Cypermethrin is hydrolyzed by potassium hydroxide to obtain hydrolyzed cypermethrin in the form of 3-phenoxybenzaldehyde by-product (HCy). The detection strategy is based on the aggregation of AuNPs@Cyst caused by hydrogen-bonding recognition between the aldehyde group of HCy and the amine group of l-cysteine on the surface of AuNPs@Cyst. As a result, in the presence of HCy under optimal pH 7, AuNPs@Cyst aggregates within 7 min, exhibiting a distinct color change from red to blue-gray, which can be evaluated with the naked eye and UV-visible spectrophotometry. From FE-TEM image, the stable and spherical AuNPs@Cyst had an average size of 13.8 ± 1.6 nm, and from zeta potential analysis, the charge of AuNPs@Cyst was -25.04 ± 1.66 mV. The surface plasmon resonance band of dispersed AuNPs@Cyst was red shifted from 525 nm to 634 nm when AuNPs@Cyst was aggregated. The absorbance ratio (A634/A525) was linearly related to cypermethrin concentrations from 0.5 to 13.0 mg L-1. The limit of detection was 0.2 mg L-1 and precision, expressed as relative standard deviations (RSDs), ranged from 1.9 to 7.3%. In the presence of interfering pesticides (carbaryl, ethion, profenofos and abamectin), only cypermethrin produced a significantly different response, confirming the selectivity of AuNPs@Cyst. Finally, AuNPs@Cyst was applied to determine cypermethrin in water samples, achieving very satisfied recoveries (>98.6%) and RSDs lower than 6.1%.

| S-EPMC10946417 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data